Sponge Iron Suppliers and Manufacturers

IOP Specialists Sdn Bhd is a High-technological Status company engaged in the production of Sponge Iron.

Fe (Total): 87% Fe (Metal): 80% MD: 92%

FE 65 +/- 0.5% Range Feo 1% Max P 0.05% Max S 0.008% Max Sio2 4% Max Moisture 0 Max Tumbler Index 95 Min Abrasion Index 4 max ------------------------ CCS (KG/P) 250 Min Size (9-16 mm) 90% Min Size

Quantity Available - 1500 MT Please contact for price and other details

Because of the bright future of the universal requirement for DRI briquette over the next two decades, a new method was created in 2009 in Iran to produce a cold briquette of CDRI (Patent No. IR60923). Cold-Briquetted Sponge Iron (CBSI) was the name given to the new product. Afterward, following pilot-scale and performing various laboratory studies, Cold-Briquetted Iron and Carbon (CBIC) was invented in Iran as a premium product over CBSI because of the prior�¢??s higher carbon content sand higher efficiency through processes of steelmaking (Patent No. IR84090). Owing to the fact that the cold-briquetting process of DRI is being done under high pressures, the density and mechanical strength of CBIC should be higher and the surface area and also porosity should be less than DRI�¢??s. thus, the oxidation rate, dust and fine generation rate, and the moisture adsorption capacity of DRI will considerably decrease through the process of cold briquetting. These improvements would have big technical, economic and environmental effects on direct reduction and industries steel manufacturing and will push them heading for more sustainability

Sponge Iron Characteristic: 1.Sponge iron using high quality ore, the reduction reaction by using the principle of oxidation, through the filter type except Lake way to exclude, pipelines, boilers and circulating water corrosion of dissolved oxygen is processed by water water dissolved oxygen content can reach below 0.05mg/L. 2.It has a large specific surface area, developed pore structure. 3.High activaty, high compressive strength and the backwashing frequency is low. 4.No powder, no hardening.

Direct reduced iron (DRI), also called sponge iron, is produced from the direct reduction of iron ore (in the form of lumps, pellets, or fines) to iron by a reducing gas.

Sponge iron is also called the direct reduced iron (DRI), is a high-quality hematite stone as raw material, USES the high quality sponge iron ore, using the REDOX reaction principle, through a filter in addition to rule out in the form of lake pipe, boiler and circulating water dissolved oxygen corrosion after water treatment water dissolved oxygen content can be below 0.05 mg/L. In rotary kiln, shaft furnace or other reactor, coal, coke, gas or hydrogen gas, iron ore and pellets of iron concentrate in below material melt temperature under the condition of low temperature reduction, become the product of cellular.The reduction of iron with small iron core, like brocade, therefore calls the sponge iron, after cooling, crushing, magnetic separation, can eliminate gangue or other impurities (metallic iron more than 90% of total iron, can be directly used in steelmaking; below 90%, used in the blast furnace or electric furnace ironmaking).

Sponge iron is a kind of environmentally friendly water treatment processing. Using an activation treatment of highly active, large specific surface area of sponge iron type filter material deoxidizer. Room temperature processing of industrial water (or water) is an ideal effect (residual oxygen content: 0.03 to 0.05 mg/L), the product supporting facilities has the advantages of low investment, simple maintenance, low cost of transportation, oxygen advantages with good effect, can be widely used in boilers and circulating water equipment, is a kind of high performance and energy saving products. Sponge iron with the activity of specializing in the production of sponge iron (direct reduced iron) to remove dissolved oxygen in water, sponge iron main component is iron, the internal structure of the porous, provides the specific surface area of 5-100000 times that of ordinary iron filings, can make the water of oxygen and iron quickly complete oxidation reaction. Reaction product Fe (OH) 2, Fe (OH) 3 is not easy to dissolve in water floc, when with water flow through the rest of the sponge iron particles was stopped, as long as the use of a certain intensity backwashing water can rinse (about 5 minutes).

Sponge iron fines Sponge iron briquettes Sponge iron lumps

We are pleased to introduce Piyali Engineering Corporation, located in Delhi, India. We are leading manufacturer and supplier specializing in the production of Sponge Plant DRI (Direct Reduced Iron) equipment and vital components for steel plants, alongside catering to a diverse range of industries including sugar mills, cement plants, fertilizer plants, chemical plants, coal washeries, activated carbon plants, and ball mills. With a strong focus on quality and innovation, Piyali Engineering Corporation stands as a trusted provider of cutting-edge solutions across various industrial sectors. With a wide range of offers and a strong customer base, we have been serving the industry for several years. Our product range includes various capacities of DRI kilns and coolers, ranging from 50TPD to 600TPD & 900TPD, along with components such as support rollers, pinions, shafts, shells, combined bearing housing complete assemblies, spring plates, Ball Mill Pinion Shaft, Mill Head End Cover for Ball Mill Manufacturer, girth gears, and more. These offerings are designed to meet the needs of Cement Plants, Power Plants, Steel Plants, Sponge Iron Plants, Chemical Plants, Fertilizer Plants, and various other industries. Explore top-notch Lime Kiln Paper Mill Equipment at Piyali Engineering Corporation for customized, cost-effective solutions. Our commitment to excellence ensures reliable expertise and high-quality equipment, guaranteeing seamless industrial operations. Furthermore, we specialize in delivering high-quality Rotary Kiln & Cooler equipment specifically tailored for 350 TPD and 200 TPD DRI Sponge Iron Plant applications. We specialize in providing all the equipment necessary for your project, including Rotary Kilns and Coolers, ensuring your plant runs smoothly and efficiently. Trust Piyali Engineering Corporation, For superior engineering solutions. With us, you get the perfect fit for your plant's needs, ensuring smooth and efficient operations.

We are selling titanium sponge, located in Rotterdam. We have 90 tons at the moment Ti: 98% min O: 0.10% max, N: 0.10% max C: 0.10% max CI: 0.15% max Si: 0.04% max F: 1.9% max Mg: 0.001% max Ni: 0.010% max Size: 5-30mm

A. Specification Product Quality Stainless Steel Wool fill fabric for home Material Stainless steel and poly fiber Weight Ranging from 2000gsm Size 4"*10m per roll or as requested Width 47"/48" Package Roll or Sheet B. Feature: 1. 100% non-toxic and environmentally safe 2. Easy to install due to its flexible, compressible nature, comes in rolls and can be cut to size or shape desired, stuff it in the hole, and you are done. 3. It is a permanent solution, will not rust or corrode over time, dose not shrink, stain, pull out. 4. Made of sharp durable fibers material which is suitable to die cut to specific shapes and sizes. 5.Most consistent material for exhaust applications with strength in all directions as cross-lapped material going at approximately 90 degree angles to other fibers. 6. Installs under landscaping and allows grass and small plants to grow through, thus being an invisible force against pests. C. Function 1. Fill fabric is an exclusion fabric used by professional nuisance control and pest control operators. 2. It is composed of stainless steel and poly fibers. This blend of materials gives it an extra â??spring backâ?�, allowing for easier fitting in crevices and the ability to stay in place well. Cut it 2-3 times the size of the opening to make a tight fit. 3. It is highly resilient and is an impenetrable barrier against rodents and pests. D. Application Burrowing animals such as rats, chipmunks, gophers, groundhogs and nutria can dig beneath the ground and ruin landscaping, chew through cables and destroy dikes and levees. Prevent these animals from wreaking havoc beneath the ground, currently protecting many public and private sites. E. Install Instructions 1. Install it by pressing it into rodent-prone crevices with gloved hands or simple tools like a putty knife or screwdriver. 2. Do not install it close to live electrical conductors, since stainless stell is an electrical conductor. Installing IT around fully sealed electrical conduit coming out of a wall is safe.

We are pleased to introduce Piyali Engineering Corporation, located in Delhi, India. We are leading manufacturer and supplier specializing in the production of Sponge Plant DRI (Direct Reduced Iron) equipment and vital components for steel plants, alongside catering to a diverse range of industries including sugar mills, cement plants, fertilizer plants, chemical plants, coal washeries, activated carbon plants, and ball mills. With a strong focus on quality and innovation, Piyali Engineering Corporation stands as a trusted provider of cutting-edge solutions across various industrial sectors. With a wide range of offers and a strong customer base, we have been serving the industry for several years. Our product range includes various capacities of DRI kilns and coolers, ranging from 50TPD to 600TPD & 900TPD, along with components such as support rollers, pinions, shafts, shells, combined bearing housing complete assemblies, spring plates, Ball Mill Pinion Shaft, Mill Head End Cover for Ball Mill Manufacturer, girth gears, and more. These offerings are designed to meet the needs of Cement Plants, Power Plants, Steel Plants, Sponge Iron Plants, Chemical Plants, Fertilizer Plants, and various other industries. Explore top-notch Lime Kiln Paper Mill Equipment at Piyali Engineering Corporation for customized, cost-effective solutions. Our commitment to excellence ensures reliable expertise and high-quality equipment, guaranteeing seamless industrial operations. Furthermore, we specialize in delivering high-quality Rotary Kiln & Cooler equipment specifically tailored for 350 TPD and 200 TPD DRI Sponge Iron Plant applications. We specialize in providing all the equipment necessary for your project, including Rotary Kilns and Coolers, ensuring your plant runs smoothly and efficiently. Trust Piyali Engineering Corporation, For superior engineering solutions. With us, you get the perfect fit for your plant's needs, ensuring smooth and efficient operations. For any inquiries or further information, please do not hesitate to get in touch with us via the provided contact details:

We are pleased to introduce Piyali Engineering Corporation, located in Ghaziabad, India. We are leading manufacturer and supplier specializing in the production of Sponge Plant DRI (Direct Reduced Iron) equipment and vital components for steel plants, alongside catering to a diverse range of industries including sugar mills, cement plants, fertilizer plants, chemical plants, coal washeries, activated carbon plants, and ball mills. With a strong focus on quality and innovation, Piyali Engineering Corporation stands as a trusted provider of cutting-edge solutions across various industrial sectors. With a wide range of offers and a strong customer base, we have been serving the industry for several years. Our product range includes various capacities of DRI kilns and coolers, ranging from 50TPD to 600TPD & 900TPD, along with components such as support rollers, pinions, shafts, shells, combined bearing housing complete assemblies, spring plates, Ball Mill Pinion Shaft, Mill Head End Cover for Ball Mill Manufacturer, girth gears, and more. These offerings are designed to meet the needs of Cement Plants, Power Plants, Steel Plants, Sponge Iron Plants, Chemical Plants, Fertilizer Plants, and various other industries. Explore top-notch Lime Kiln Paper Mill Equipment at Piyali Engineering Corporation for customized, cost-effective solutions. Our commitment to excellence ensures reliable expertise and high-quality equipment, guaranteeing seamless industrial operations. Furthermore, we specialize in delivering high-quality Rotary Kiln & Cooler equipment specifically tailored for 350 TPD and 200 TPD DRI Sponge Iron Plant applications. We specialize in providing all the equipment necessary for your project, including Rotary Kilns and Coolers, ensuring your plant runs smoothly and efficiently. Trust Piyali Engineering Corporation, For superior engineering solutions. With us, you get the perfect fit for your plant's needs, ensuring smooth and efficient operations. For any inquiries or further information, please do not hesitate to get in touch with us via the provided contact details:

We are pleased to introduce Piyali Engineering Corporation, located in Ghaziabad, India. We are leading manufacturer and supplier specializing in the production of Sponge Plant DRI (Direct Reduced Iron) equipment and vital components for steel plants, alongside catering to a diverse range of industries including sugar mills, cement plants, fertilizer plants, chemical plants, coal washeries, activated carbon plants, and ball mills. With a strong focus on quality and innovation, Piyali Engineering Corporation stands as a trusted provider of cutting-edge solutions across various industrial sectors. With a wide range of offers and a strong customer base, we have been serving the industry for several years. Our product range includes various capacities of DRI kilns and coolers, ranging from 50TPD to 600TPD & 900TPD, along with components such as support rollers, pinions, shafts, shells, combined bearing housing complete assemblies, spring plates, Ball Mill Pinion Shaft, Mill Head End Cover for Ball Mill Manufacturer, girth gears, and more. These offerings are designed to meet the needs of Cement Plants, Power Plants, Steel Plants, Sponge Iron Plants, Chemical Plants, Fertilizer Plants, and various other industries. Explore top-notch Lime Kiln Paper Mill Equipment at Piyali Engineering Corporation for customized, cost-effective solutions. Our commitment to excellence ensures reliable expertise and high-quality equipment, guaranteeing seamless industrial operations. Furthermore, we specialize in delivering high-quality Rotary Kiln & Cooler equipment specifically tailored for 350 TPD and 200 TPD DRI Sponge Iron Plant applications. We specialize in providing all the equipment necessary for your project, including Rotary Kilns and Coolers, ensuring your plant runs smoothly and efficiently. Trust Piyali Engineering Corporation, For superior engineering solutions. With us, you get the perfect fit for your plant's needs, ensuring smooth and efficient operations. For any inquiries or further information, please do not hesitate to get in touch with us via the provided contact details: PIYALI ENGINEERING CORPORATION Contact Person: Ranjan Kumar Phone: +91 798-239-8797 Email: sales@piyaligroup.com. Thank you for your consideration.

We make all grade of manganese ore and iron ore as per company requirement. Loose packing ( lumps, fine, chips )

We have 30 000 tons of Directly Reduced Iron with Fe content of 92% 30 000 tons