1.99.9% copper 2.Q235 steel 3.Copper thickness:>=0.254mm 4.Tensile strength:>=500n/mm2 5.Offer oem service Specifications Copper bonded ground rod is applying 99.95% pure copper on low carton steel by electroplating. Ground rod technical specification: 1) copper purity is 99.95%. 2) copper layer is over 0.2mm . 3) the steel core is low carbon steel, and the carbon content is about 0.15%. 4) the steel core has a tensile strength not less than 570nm/mm2. 5) the ground rod is fully covered with copper cladding without any cracks, holes, cavities etd. Preventing exposure of the steel core to soil and moisture. The ground rod is suitably treated to prevent oxidation of copper bonding. 6) the ground rod is capable of being bent 90 degrees at a maximum radius of 100mm with no copper fracture and with no ill effect on the bond between the steel and the copper cladding. 7) good in anticorrosion that usage-life is more than 50 years or more, constant low resistance and good plasticity which had the characteristics of copper as well as steel We can supply ground rod in all sizes and shapes, threaded and/ or tipped. 1) ground rod can be made double heads thread, thread can be packed by plastic sheath 2) one end is pointed and the other end is threaded for extend 3) one end is pointed and the other end is flat. *special sizes and copper thickness can be supplied on request In bundles and pallets
1.99.9% copper 2.Q235 steel 3.Copper thickness:>=0.254mm 4.Tensile strength:>=500n/mm2 5.Offer oem service Specifications Copper bonded ground rod is applying 99.95% pure copper on low carton steel by electroplating. Ground rod technical specification: 1) copper purity is 99.95%. 2) copper layer is over 0.2mm . 3) the steel core is low carbon steel, and the carbon content is about 0.15%. 4) the steel core has a tensile strength not less than 570nm/mm2. 5) the ground rod is fully covered with copper cladding without any cracks, holes, cavities etd. Preventing exposure of the steel core to soil and moisture. The ground rod is suitably treated to prevent oxidation of copper bonding. 6) the ground rod is capable of being bent 90 degrees at a maximum radius of 100mm with no copper fracture and with no ill effect on the bond between the steel and the copper cladding. 7) good in anticorrosion that usage-life is more than 50 years or more, constant low resistance and good plasticity which had the characteristics of copper as well as steel We can supply ground rod in all sizes and shapes, threaded and/ or tipped. 1) ground rod can be made double heads thread, thread can be packed by plastic sheath 2) one end is pointed and the other end is threaded for extend 3) one end is pointed and the other end is flat. *special sizes and copper thickness can be supplied on request In bundles and pallets
1.99.9% copper 2.Q235 steel 3.Copper thickness:>=0.254mm 4.Tensile strength:>=500n/mm2 5.Offer oem service Specifications Copper bonded ground rod is applying 99.95% pure copper on low carton steel by electroplating. Ground rod technical specification: 1) copper purity is 99.95%. 2) copper layer is over 0.2mm . 3) the steel core is low carbon steel, and the carbon content is about 0.15%. 4) the steel core has a tensile strength not less than 570nm/mm2. 5) the ground rod is fully covered with copper cladding without any cracks, holes, cavities etd. Preventing exposure of the steel core to soil and moisture. The ground rod is suitably treated to prevent oxidation of copper bonding. 6) the ground rod is capable of being bent 90 degrees at a maximum radius of 100mm with no copper fracture and with no ill effect on the bond between the steel and the copper cladding. 7) good in anticorrosion that usage-life is more than 50 years or more, constant low resistance and good plasticity which had the characteristics of copper as well as steel We can supply ground rod in all sizes and shapes, threaded and/ or tipped. 1) ground rod can be made double heads thread, thread can be packed by plastic sheath 2) one end is pointed and the other end is threaded for extend 3) one end is pointed and the other end is flat. *special sizes and copper thickness can be supplied on request In bundles and pallets
Made out of PVC material 16mil thickness (0.4mm) UV resistant Color: Red, Dark Green, Orange, etc Regular size: 6ft x 6ft & 8ft x 6ft This curtain is used to barricade the area where welding is carried. We can customize the size of blanket as per client requirements 8ft x6ft
Payment: T/T, L/C Delivery: 25 days after the order confirmation Package: standard package or as you required We offer customized products for your specific need. For more information about our products. Please
Model number: aws e6013 Material: carbon steel Length: 300-450mm Operating current: 50-240mm Welding current : 50-240mm Operating temperature: common Diameter: 2.0-5.0mm Application: mild steel structure Color: gray green blue and red Guage: 8, 10, 12, 14 Coating: rutile Core wire: H08A.
SSTS are professional in supply the Aluminum welding wire as following all the surface of welding materials are smooth and clean the welding wire are labeled with production number and date even the source materials are kept for investigation A, Detailed product Description: ER1200/1100/1070: The product has good ductility and corrosion resistance suitable for oxyacetylene gas brazing pure aluminum as well as argon arc ER4043/4047/4145: good corrosion resistance wide range of usage used as fulling masterials whiles gas welding and organ arc welding of aluminum alloys other than high magnesium alloys. A-1 Package Detail : MIG wire TIG rod ` Dia: 0.8mm -1.6mm 1.6mm-4mm*1000mm 0.5kg/spool 2kgs/spool 4mm-8mm*1000mm 7kgs/spool B,Technical standards as per AWS related standard Alloy 99.0min Fe & Si Fe Si Mn Zn Mn Cu Ti Cr ER1100 rem 0.095 0.05 0.10 0.05 0.10 ER2319 rem 0.30 0.20 0.20-0.40 0.10 0.20-0.40 0.10 0.10-0.20 ER4043 rem 0.80 4.5-6.0 0.05 0.10 0.05 0.10 0.20 ER4047 rem 0.80 11.0-13.0 0.15 0.20 0.15 0.20 ER5356 rem 0.40 0.25 0.05-0.20 0.10 0.05-0.20 0.10 0.06-0.20 ER5183 rem 0.40 0.40 0.5-1.0 0.25 0.5-1.0 0.25 0.15 0.05-0.20 ER5554 rem 0.40 0.25 0.5-1.0 0.25 0.5-1.0 0.25 0.05-0.20 0.05-0.25 ER5566 rem 0.40 0.25 0.5-1.0 0.25 0.5-1.0 0.25 0.05-0.20 0.05-0.20 ER4145 rem 0.80 9.3-10.7 0.15 0.20 0.15 0.20 0.15.
SSTS are professional in supply the Brazing welding rod, such as: low silver brazing rod Bcup-2 ( Harris 0), and high silver content brazing welding rod Bag-20 etc, Factory is load in Ningbo of China who have over 10 years produce experience, round rod, flat rod ,also welding ring is ok for us never mind what size . A, Detailed product Description: A-1 Low silver content braizing welding metal: Standard Chemical composition(%) AWS (JIS) P Ag Cu Sn Sb Sodify Lipuefy Use temp Bcup-1 4.8-5.3 / Rem / / 705 925 710-930 Bcup-2 6.8-7.5 / Rem / / 710 795 735-845 BCup-3 5.8-6.7 4.7-6.3 Rem / / 645 815 720-815 Bcup-4 6.8-7.7 5.8-6.2 Rem / / 645 720 690-790 Bcup-5 4.8-5.3 14.5-15.5 Rem / / 645 800 705-815 Bcup-6 6.5-7.2 1.8-2.2 Rem / / 645 790 730-815. Technology Bcup-1 It is the highest temperature of the P Cu solder widely used in Gas appliances Bcup-2 Good flow property economical widely used in the brazing of presenting in air-conditioners and the no-verbatim load areas Bcup-3 Have certain plasticity suitable for brazing copper alloy and some copper ¨Cwhich can¡¯t conjugate tightly BCup-4 It is of low melting point It is especially fit for the automatic braze welding it has been largely applied in the soldering with four way valve and cut-off valve Bcup-5 Bettered plasticity and conductivity of joint suitable especially for brazing copper and copper alloy with vibration load Bcup-6 Widely used in brazing copper and copper alloy in the fields of air-conditioning and mechanical-electrical good flow property and filling capability. A-2 High silver content brazing rod The silver borer material is a kind of borer material with silver base or the silver base, have fine craft,performance, low dissolves temperature ,good moisture and the ability to fiil-up interval ,and the high intensity ,good plasticity ,good electric aluminums ,magnesium and other low melting lamp manufacture ,ironware & electric apparatus ,instrument & apparatus ,chemical industry ,Aero-Space ,etc AWS Chemical ingredient (%) Temperature Principal areas of application Ag Cu Zn Sn Ni Solidus Liquidus Use temp Bag-18BSn 17-19 44-46 31-35 1.5-2.5 / 770 810 810-880 High melting point ,and braze copper and steel without cadmium Bag-25B 24-26 40-42 32-36 / / 700 800 800-890 Good wetness and filling property ,suited for brazing copper, copper alloy and steel with higher melting point Bag-20 29-31 37-39 30-34 / / 677 766 760-840 Suited for brazing copper, copper alloy and steel with low melting point and good techniac Bag-35B 34-36 31-33 31-35 / / 621 732 730-810 Suited for brazing copper ,copper alloy and steel with low melting point and good technics, the melting point lower than 30silver Bag-28 39-41 29-31 31-35 1.5-2.5 / 650 710 710-790 It is the fine flow-ability. It is applicable for ferrite steel and none ferrite steel welding Bag-4 39-41 31-33 26-30 / / 677 732 730-810 Mid-level melding range ,good ductility and penetrability economical and penetrability economical Bag-36 44-46 26-28 23-27 2.5-3.5 / 645 680 680-760 Used generally for brazing the part required cleanliness face in mechanical-electrical and food industries due to its perfect general features, good ductility and penetrability Bag-6 49-51 33-35 14-18 / / 690 775 770-850 Used for brazing these materials under vibration load in electrical and food industries Bag-24 49-51 19-21 26-30 / 1.5- 660 707 710-790 Suited for brazing stainless steel with improved capability of resistance of crevice corrosion 2.5 Bag-7 55-57 21-23 15-19 4.5-5.5 / 618 652 650-720 Suited for brazing stainless steel in food and other industries with low melting point, high penetrability good ductility and corrosion resistance property B-Package detail : A1, A2 Size (mm) Rod style Package style 0.5mm~1.0mm wire 15kgs/spool; 10kgs/coil 1.2mm~5mm*500mm Round rod 1 lb/tube; 0.5 or 1 or 2 or 5kgs/ pp bag, then 10 kgs or 20kgs/ctn; 500kgs/wooden box. 1.3mm*3.2mm*500mm Flat rod 1 lb/tube; 0.5 or 1 or 2 or 5kgs/ pp bag, then 10 kgs or 20kgs/ctn; 500kgs/wooden box. 3.2mm*3.2mm*498mm.
MAPP GAS physical property: Actual burning temperature: approach to 3600 degree fahrenheit The full burning time: nearly 2hours and 40mins Scientific blend proportion and good flame to guarantee good welding result and shorten working time Pressure(psig)110 psig, at temperature 20 celsius degree Portable for using. G.W.890g /cyl, N.W. 453.6 g/cyl,12 cyls /ctn, 17004 cylinders per 20ft container.
1. High performance low energy consumption electronic auto-ignition reach highest temperature in a short time, flame focus. 2. Air-based combustion, no need to use oxygen cylinders to support combustion 3. Adjustable flame. 4. Use mapp, propane, liquefied petroleum gas and butane gas as gas source 5. Light weight portable. 6. The torch is connected according to cga600 standard. 7. Widely used in air-conditioning installation, maintenance; refrigerator maintenance.
Elbow Our elbow fittings are available in different specifications are manufactured with quality raw materials to meet the challenges of many kinds. These fittings have been serving industries like chemical, oil & gas, pharmaceutical & power industries. We have many options in the elbow fittings category listed as below:- We are one of the best & leading manufacturer & supplier of bulk head elbows, which are used in many big industries and provide required function. These are procured out of premium grade materials to make sure the functionality of the parts with perfection. We offer these bulk head elbows at affordable costs to our customers. Free fumigation plywood case or plywood pallet.
Tee Size : 1/2"NB TO 48"NB IN Schedule : SCH20, SCH30, SCH40, STD, SCH80, XS, SCH60, SCH80, SCH120, SCH140, SCH160, XXS Type : Seamless / ERW / Welded / Fabricated Form : Equal Tee, Reducing Tee, Barred Tee , Lateral Tee Materials Stainless Steel Tee ¡§C SS Tee ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L Carbon Steel Tee ¡§C CS Tee ASTM A 234 WPB , WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70. Low Temperature Carbon Steel Tee ¡§C LTCS Tee ASTM A420 WPL3 / A420WPL6 Alloy Steel Tee ¡§C AS Tee ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91 Duplex Steel Tee ASTM A 815 UNS NO S 31803 , S 32205. Free fumigation plywood case or plywood pallet.
cap ANSI B16.9, DIN 2617, EN 10253-1 Up to 24¡± N.B. all schedules Carbon steel: ASTM/ASME SA234 WPB, WPC, Alloy steel: ASTM/ASME SA234 WP5, WP9, WP11, WP12, WP22, WP91 Temperture Steel: ASTM/ASME A420 WPL6 WPHY P42,P46,P52,P56,P60,P65,P70. Free Fumigation Plywood case or Plywood pallet.
Flange We possess immense expertise in the dealing of a wide gamut of steel flanges that are constructed to precision at our vendors end. Highly acclaimed by our global clients for their qualitative features of durability and strength, these flanges find diverse application in several industry verticals. Form: Socket Weld¡¢Slip on£¬Blind£¬Lapped£¬Screwed£¬Weld Neck£¬Long Weld Neck£¬Reducing£¬ ¡¤ Spectacle¡¢Ring Joint Pressure rating: class 150LBS¡¢300LBS¡¢400LBS¡¢600LBS¡¢900LBS¡¢1500LBS¡¢2500LBS Dimensions: ANSI B16.5, ANSI B16.47, MSS SP44, ANSI B16.36, ANSI B16.48, API 605, AWWA AND DRAWING Metrial£º CS Standard: ASTM / ASME A/SA 105 / 350 LF 2 ¡¤ SS Standards: ASTM / ASME A/SA 182 Steel Grade: F 304, 304L, 304H, 309S, 309H, 310S, 310H, 316, 316TI, 316H, 316L, 316LN, 317, 317L, 321, 321H, 347, 347H, 904L. ¡¤ AS Standard: ASTM / ASME A/SA 182 ASTM A182 F1, F11, F12, F22, F5, F9, F91. ¡¤ Nickel Alloy Standard: ASTM / ASME SB 564 / 160 / 472 Grade: UNS 2200 (NICKEL 200), UNS 4400 (MONEL 400), UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600), UNS 6601 (INCONEL 601), UNS 6625 (INCONEL 625), UNS 10276 (HASTELLOY C 276), UNS 2201 (NICKEL 201), (ALLOY 20 / 20 CB 3). Free fumigation plywood case or plywood pallet.
DC MIG welder: This range of easy to used Mig welding offer quality performance for the advanced. Robust but portable. There fan cooled welders are also available as dual purpose units offering quality welding indoors or out. include full accessories, such mig torch. hammer/brush. earth clamp. Mask. welding rod and so on, With CE approved. Can be common used fluxed cored wire and solid wire except MIG-100 and MIG-130. Model MIG-100 MIG-105 MIG-130 MIG-135 MIG-150 MIG-175 MIG-195 Rated input voltage(V) 1 PH 230V 1 PH 230V 1 PH 230V 1 PH 230V 1 PH 230V 1 PH 230V 1 PH 230V Current Range(A) 55-90 35-90 55-120 40-120 40-140 40-160 40-180 Max current out put(DC) 90A@10% 90A@10% 120A@10% 120A@10% 140A@10% 160A@10% 180A@10% Rated input capacity (KVA) 2.4 3 3.5 4.7 5.2 6.3 7.5 Usable welding wire 0.6-0.8 0.6-0.8 0.6-0.8 0.6-0.8 0.6-0.8 0.6-1.0 0.6-1.0 Steel welding diameter 0.8 0.8 0.8 0.8 0.8 0.8-1.0 0.8-1.0 Aluminum welding diameter 0.8-1.0 0.8-1.0 0.8-1.0 0.8-1.0 0.8-1.0 0.8-1.0 0.8-1.0 Flux welding wire diametre 0.8 0.8 1 1 1 1.2 1.2 Insulation class H H H H H H H Weitht(KG) 16 25 18 27 33 36 38 Dimension(cm) 54X26.5X41 54X26.5X41 54X26.5X41 54X26.5X41 60X35.5X39.5 60X35.5X39.5 60X35.5X39.5 Wooden case
Qingdao langshuo metal products co, ltd located in jimo city horse road south of qingdao city, with beautiful surrounding and convenient traffic condition, jiqing express way in its west, qingwei express way in its north, only 8 kilometers away from qingdao liuting international airport. It is about 60 kilometers away from qingdao port . We mainly make hardware punching and welding productsíómachinery products íótool cart íósoaks products íópolyurethane products and false hair products . We have the right of products imports and exports . Our company is the fixed point factory to domesticíójapaníóamericaíóand europe etc. Our mainly client groups are haieríóhisenseíóimpulsefitness and thrip-master and so on famous company. Qingdao langshuo metal products co , ltd adhering to the principle of "honoring contracts keeping promisesíóquality first and customers supreme", providing high quality service for clients with all sincerity .We hope cooperate with new and old clients and develop together well. Pallet
Model autotek942 lead free soldring station 01 nos/4kg
Materials: high quality low carbon steel wire Processingú¦hot-dipped galvanized wire choice low carbon steel wire, through the process of wire drawing, acid washing and rust removing, annealing and coiling. Features: hot-dip galvanized wire we produce offers excellent flexibility and softness. Application: this kind of wire is extensively used in construction, handicrafts, woven wire mesh, express way fencing mesh, packaging of products and other daily uses. Specification: dia. : 1.60 mm---5.50 mm Ensile strength : 400-600 n/mm2ú¿softú¬ 600-900n/mm2(hard) Zn coating : 30---366g/mm2 Packing: in coils and each coil to be wrapped inside with pvc strips and outside with hessian cloth or inside with pvc strips and outside with weaving bag, Also can be made according to our customers' requirements.
E6013 is a mild-steel, all position, general purpose cellulose-base rod. It operates on ac or dc welding current and works well on low voltage ac machines. E6013 is an excellent choice where there is poor fit-up in the joint. It deposits easily and smoothly producing medium to shallow penetration. Small sizes are well adapted to low heat on thin metals. Medium to heavy slag is easily removed and provides for excellent weld cleaning action during the welding process. Typical wire chemistry: C: 0.063 Mn: 0.50 Si: 0.27 P: 0.017 Available diameters: 2.5mm, 3.2mm, 4.0mm & 5.0mm
Voltage&frequency:230v~50hz Rate power /:1000/2000w temperature /:350/550 Ar flow /:300/500 l/mn vde plug, 2m cable Packng n color box Carton sze:48.5*28*43cm N.W./g.W. 8.5/9.5kg