Product lntroduction Ultrafine foaming agent is a light-yellow powder and it is one of high temperature forming agents. This series of foaming agent has small and narrow particle size on average, with its foam holes being uniform and exquisite. Ultrafine forming agent enjoys good dispersibility and compatibility among various rubber materials. Ultrafine foaming agent is widely used in many foaming process and atmospheric pressure foaming process, including extrusion, mould pressing and injection, of various high-demanded plastic and rubber, such as PE, PS, PP, EVA, PVC and other materials. It is particularly suitable for freedom foaming process of PVC/NBR system.
Specification: 1.Color: Various. 2.Size: Customized. 3.Hardness: Shore C 30-70°. 4.Temperature Resistance: 80â?? 5.Certification: ROHS, SGS, ISO9001, etc. Description: * With good flexibility and rubbery elasticity, transparency and surface gloss, good chemical stability, good anti-aging and ozone resistance, and non-toxic at -50 degrees centigrade; * Buffer good performance: independent and fine pore closure; * Chemical resistance: resistant to organic solvents, acids, bases, etc.; * No chemical corrosion: It has no corrosion to the components and packaging; * Heat insulation, sound insulation, water absorption, moisture; * Good processing performance, easy molding.
Silicone Rubber Foam has excellent heat resistance, cold resistance, dielectric, ozone resistance and resistance to atmospheric aging and other properties.The outstanding performance for silicone is the use of temperature. Can be used at -60 (or lower temperature) to +280 (or higher) for a long time.Due to the stable chemical properties, high adsorption performance, higher mechanical strength, good thermal stability, it is widely used in automotive, aerospace, computers, fax machines, printers, high temperature parts, Kitchen utensils, appliances and other equipment. Characteristics of silicone rubber sponge: 1. UV, ozone resistance, resistance to extreme temperature and flame retardant 2. The sealing ability, can effectively prevent small particles and rain 3. Seal, dust proof, moisture proof, air tight and light shielding, vibration isolation Colors: In addition to red, gray, color, white and black can also be made to other colors Special specification: Minimum width: not limited Minimum length: not limited Minimum thickness: 1.0mm Max width: 1200mm Max length: not limited Max thickness:30mm
Introduction Homey 80 polyurethane foam is the construction foam which special design for Installation and insulation. Application , a)excellent adhesion on most substrates b)installation, fixing and insulating of door and window frames c)filling and sealing of gaps, joint, openings and cavities d)bonding and mounting e)installation the electrical outlets and water pipes f)heat preservation, cold and sound insulation Cas no.:9009-54-5 Other names:polyurethane foam Mf:mixture Einecs no.:230-391-5 Place of origin:china(mainland) Classification:other adhesives Main raw material:polyurethane Usage:construction, woodworking Brand name:homey Model number:80 Type:pu foam Component:one component Hs code:3214109000 Volume:750ml, 500ml, 300ml Usage way:gun, straw Color:off-white Fire retardant grade:grade b2 Performance:bonding and mounting Oem:available Shelf life:12months/quality guarantee Storage:store at 25 or below Packaging details:750ml, 500ml, 300ml;12pcs/ctn 12pcs/ctn, 1200 cartons without pallet
IXPP foam Full name: Physical cross-linked polypropylene foam, Irradiation cross-linked polypropylene foam Explanation: Irradiation cross-linked Polypropylene (IXPP) foam is a kind of high-performance closed cell foaming material which is made of polypropylene and various fillers, additive, and foaming agents various material.� It� can be widely used in� the automotive� interior, aerospace, Construction material, Package and other industries. Features: 1.Excellent tensile, better compression properties than PE foam; 2.Soft, light-weighted, and flexible- 60% less weight than ordinary material 3.Good noise reduction, thermal insulation, water-proof;Shock absorption; 4.High temperature resistance-- It is suitable for application process with thermal stability up to 150 �ºC 5.Good weather resistance and aging behavior The good plasticity and the thermoformable and compression moulding features of IXPP foam make it available to combine with non-woven fabrics, velvet, knitted fabric, leather, fibrofelts, PP board, PU board, PS board, glass fiber board by hot melt gum, compressing moulding, lamination or casting method to foam automobile interiors, the whole process is non-pollution. Colour: black, white Size: rolls & sheets, customized Density: 33.33kg/m3-200kg/m3 Thickness: 0.3mm-55mm, also provide composite layer
Pre-saturated clean foam swab Packing : 50 swabs / box Nominal size dimension : 5.0â??â?? Part number : ipapfs-707 Features & benefits - 100 ppi , open cell polyurethane rectangular foam tip. - non abrasive. - foam is sealed directly onto the plastic handle without use of adhesive to make it more environmental friendly. - easy handling - excellent for removing ink stains, adhesive residue , and debris on the print head. Applications - computer keyboards. - optical and magnetic head devices. - electronic components. - thermal printers (card printers, barcode printers, label printers, receipt printers) - inkjet printers Characteristics The clean foam swab tip is pre-saturated with ipa solution and packed in individual pouch. Remove swab handle from the opening pouch, clean the thermal print head by using a back & forth motion to effectively remove dirt and debris accumulated on the print head thus extending its life and maintaining a readable image.
Borosilicate Foam Glass Lining Brick 1. Borosilicate foam glass, B203 containing, has good resistance to both acid and alkali, so it is a good protection layer to acid condensation produced from wet desulphurization. 2. It works as a barrier to the alteration of high temperature and low temperature inside chimney, thus relief the chimney wall from thermal stress, and extend the service life of chimney. 3. The compression strength of B203 containing foam glass brick reaches more than 1.5MPa, which significantly exceeds the requirement of chimney liner, in a way offers potential to reduce the cost of the chimney. 4. Its coefficient is less than 0.058 w/m.k and its service life is the same as the chimney itself.
Foam Densifier ZEUS C200 can prevent the compacted EPS, PE Foam, and other materials from scattering. A foam densifier could also prevent the compacted material from loosening again. GREENMAX foam densifier offers convenience for foam recyclers. A foam densifier with an automatic cut-off system saves labor costs a lot. INTCO Recycling offer foam densifier Z-C200 for foam recycling and buy polystyrene and polyethylene blocks back. Applicable materials: include EPS(Styrofoam), EPE(PE FOAM), EPP, XPS and PSP, Food Trays and Cups.
Premium quality water based multi-cleansing foam. Top quality formulation made in Korea by Face Revolution Co. LTD. Premium quality at low price.
Premium quality, mild-ph, non-irritating, Facial multi-cleansing foam. Top quality formulation made in Korea by Face Revolution Co. LTD. Premium quality at low price.
Premium quality mild multi cleansing foam. Top quality formulation made in Korea by Face Revolution Co. LTD. Premium quality at low price.
EVA Foam in sheet foam We are EVA Foam manufacturer in Malaysia. Our product used for slippers outsoles, inner soles/midsoles, packaging, construction of bridge, caskets, yoga mats, gym room mats, water seal and etc. We have our standard pattern and color chart. Special color is available upon request and subject to quantity requirement. Please feel free to contact us If you have any questions, we are happy to assist you. Thank you.
Product Name: Fire Retardance Latex foam sheet (BS5852) Specifications: Width: 220cm Length: As requirements. Thickness: 0.9cm - 20cm Density: 70D-90D Firmness: soft, middle, hard firmness Use: Hotel , Home , Bedroom Furniture , sofa, seats, bed, sheet etc. Certificate: SGS, BS5852
Product Name: 100% Dunlop Fire Retardance Latex foam sheet (BS5852) Specifications: Width: 220cm Length: As requirements. Thickness: 0.9cm - 20cm Density: 70D-90D Firmness: soft, middle, hard firmness Use: Hotel , Home , Bedroom Furniture , sofa, seats, bed, sheet etc. Certificate: SGS, BS5852
contact me WhatsAPP or Wechat +8615906222016. E-mailï¼?saleo@gwell.cn The production line of PVC skin foam, semi-skin foam and co-extrusion core layer foam plate is composed of special conical twin screw extruder, plate mold, calibration unit (three rollers) and auxiliary machine. The equipment has the characteristics of large output, stable extrusion, high foaming rate, smooth and wear-resistant surface. By printing, laminating and hot pressing equipment, it can also produce all kinds of imitation wood products, which are widely used. Gwell offers a full range of formulations and processes. PVC skin foam board, co-extrusion core layer skin foam board has excellent corrosion resistance, insulation, and a certain degree of mechanical strength. Widely used in the bus, train ceiling, the core layer of the board, interior decoration and building cladding, internal decoration plate cubicle, office, residential and public buildings, commercial decorative frame, clean room with board, ceiling board, screen printing, computer lettering, advertising signs, sign board and plate photo albums and chemical anti-corrosion engineering, thermoformed piece, cold storage with plate, special cold insulation engineering, environmental protection with plate mold, sports equipment, breeding material, seashore damp-proof installation, waterproof material, art materials and various light partitions instead of glass ceiling, etc. PVC free foam board is also known as chaffer board and Andy board. Its chemical composition is polyvinyl chloride. PVC free foam board surface hardness is general. Its chemical property is stable, and has acid resistance, alkali resistance, corrosion resistance, heat insulation. Widely used in advertising board, mounted board, screen printing, carving and so on.
Material : Latex rubber milk from Thailand Size: customized Density: 70-95kg/m3 Package: rolling packing or flat packing Technical: Dunlop / Talalay Capacity: 120m3/day Near by sea port Delivery time: 15-20days Function: breathable, Anti-mite, Healty, Eco- friendly, Natural , Soft and comfortable.
Brand Name:Chengde Model Number:SR60/SR80/SR125/SR225/ M1/M2 Style:Ear Hook Communication:Wired Connectors:3.5mm Use:Portable Media Player Function:Noise Cancelling Place of Origin:Guangdong, China Cord Length:Dongguan Waterproof Standard:IPX-2 Active Noise-Cancellation:No Material:Protein Leather+memory Foam Package:Poly Bag Colors:Black or customized Logo:Customized Logo Welcomed Usage:replacement pads
High PU Foam Adhesive is a one-component, ready to use multi-purpose Polyurethane Foam. It is fitted with head for use with a foam application gun. The foam will expand and cure by moisture in the air. It is used for a wide range of building applications. It is very good for filling and sealing with excellent mouthing capacities, high thermal and acoustical insulation. High adhesive rate than normal PU Foam. PRODUCT FEATURES 1.Strong initial viscosity and adhesive force. 2.Easy to use, high efficiency of construction. 3.Low cost of construction, easy operation. 4.Application temperature is between - 5 to +40. 5.Temperature resistance is between -30 to +80. 6.It is CFC-free and HCFC-free. APPLICATIONS AREAS 1.Be suitable for bonding of insulation board of exterior wall. 2.Be suitable for rapid bricklaying of decorated wall. 3.Bonding of interior decorative articles. 4.Bonding of wood boards or gypsum boards. 5.Waterproof .insulation and sealing to wall, roof and shield.
Shiseido Perfect Whips - made in Japan
SN- DEFOAMER 577 is liquid foam breaking/ anti- foaming agent for paper making process and shows good anti- foaming ability and foam breaking ability Advantages: SN- DEFOAMER 577 has excellent foam breaking ability at wide range of temperature (10-45 °C)/ SN- DEFOAMER 577 has little or no effect on size fastness
