Used for detergents
We can supply nitruc acid 68% from uae inbdrums n ISOs. Buyers can request best prices in hdpe drum & 35 kg jerry can packing.
Calcium lignosulphonate Could reduce the viscosity of mineral slurries is used to advantage in oil drilling mud, where it replaced tannic acids from quebracho (a tropical tree). Could use as a filler and binder in ceramic tiles, resins to fibre boards, casting sand and in fodder pellets. Could be used in lead batteries to acts on the crystallization of the lead sulfate thus increase the battery to get a much longer life-time.
Basalt is a type of mafic eruption rock, very hard stone an aphanitic (fine-grained) igneous rock containing generally 45-55% silica (SiO2) by volumn. The average density is 3.0 gm/cm3. chemical composition corresponding to gabbro penetrating stone, dark color, mineral composition including labrado, piroxen, olivine. Basalt eruptions in Vietnam are located mainly from the 17th parallel, especially in the Central Highlands and the South. In the north, basalt rocks are narrow, scattered in some areas of Nghe An, Ha Tinh and some in the Northwest. Basalt rocks are usually black or gray colors. The weathering of basalt has led to the formation of red soil, fertile brown soil or bauxite ore. Moltening basalt can spin fibers to make glass wool, or cast as acid resistant material. PRODUCTS: Slabs/ Tiles/ Cubes/ Palisades/ Capstones/ Fountains... FINISHES: Antique/ Flamed/ Honed/ Polished/ Hand-picked/ Chiselled/ Combed/ Bushed-hammered... COLORS: Black/ Grey USAGE: Indoor or outdoor BASIC SPECS: Gravity: 3.00g/cm3 Porosity: 0.69% Water absorption: Less than 0.5% Abration: Less than 5% Flexual Strength: 30.6N/mm2 Dried Compressive Strength: 221N/mm2
Amorphous Calcium Aluminate Details: The mineral of amorphous calcium aluminate (non-crystalline calcium aluminate) is C12A7. The alumina content is about 50%. However, the appearance of amorphous calcium aluminate is different from crystaline calcium aluminate or CA. It looks like greenish (or a little blue color mixed) semi-transparent beads. Generally, the grains are ground into fine powders. The Amorphous calcium aluminate powder and OPC (ordinary Portland cement) and CSA cement are formulated into Rapid-hardening Mortar and Self-leveling mortar etc. With good performance of rapid strength and little dry shrinkage. Application of the Amorphous Calcium Aluminate: Shotcrete Concrete accelerator Rapid setting, rapid hardening cement Concrete ground hardening Rapid-hardening Mortars and Self-leveling mortars etc. Amorphous calcium aluminate Packing: By jumbo bags. Store in shady, cool and dry place. Avoid damp and mix with other substance For more information about thermal heat insulation and high temperature plate, please feel free to contact us! Oreworld trade (Tangshan) co., Ltd. has been engaged in exporting business for about 20 years. We are dealing in fields of special cements, refractory materials and ore products.
Designation: A743/A743M-13a Standard Specification for Castings, Iron-Chromium, Iron-Chromium-Nickel, Corrosion Resistant, for General Application A451ASTM A451-06 Standard Specification for Centrifugally Cast Austenitic Steel Pipe for High-Temperatu A487 Standard Specification for Steel Castings Suitable for Pressure Service A351 Standard Specification for Castings, Austenitic, for Pressure-Containing Parts A352 Standard Specification for Steel Castings, Ferritic and Martensitic, for Pressure-Containing Parts, Suitable for Low-Temperature Service A703 Standard specification for steel casting,General requirements,for pressure-containing parts Features: 1. High abrasion resistance 2. Corrosion resistance 3. Tear resistance 4. Hardness: Applications: 1. Roller screen rolls for the iron ore pelletizing industry 2. Subsequent pellet processing operation in the steel industry Results of materials testing Chemical Analysis (%) Pipe No. C Si Mn P S Ni Cr Mo CA6NM 0.06 1.00 1.00 0.04 0.03 3.5-4.5 11.5-14.0 0.4-1.0 ZG06Cr13Ni4Mo 0.06 0.80 1.00 0.035 0.025 3.5-5.0 11.5-13.5 0.4-1.0 Mechanical Properties Pipe No. Heat No. Tensile Strength MPa Yield Strength MPa Elongation After Fracture % Reduction of Area % Hardness (HB) CA6NM min. 755 min. 550 Min. 15 Min. 35 285HB +-25
Minor Metals Non-ferrous metals are divided into basic metals and minor metals. Minor metals are called minor metals because they are relatively small units. Metal minor types are: Magnesium ingot antimony ingot; Electrolytic manganese. Cadmium ingots and bars; Electrolytic cobalt; Pure bismuth; pure chromium metal; Titanium sponge; Zirconium sponge; Silicon metal; Indium; Calcium; Tungsten bars; Selenium ingot; Potassium; Sodium; Niobium; Vanadium; Hafnium; Gallium. Beryllium. Molybdenum; Metal lithium; Tellurium; Germanium ingots. Rhenium. Metal arsenic. Different Kinds of Minor Metals From HSG 01 Chromium Metal Chromium metal is mainly used in nickel base, cobalt base superalloy, aluminum alloy, titanium alloy, resistance alloy, corrosion resistant alloy, iron base heat resistant alloy and stainless steel production. Industrial production of chromium metal has two kinds, one is thermite chromium, block, silver bright color, metallic luster, containing Cr> 98%, according to the use of impurities have different requirements; The other is electrolytic chromium, sheet, dark brown surface, after hydrogen refining surface bright, containing Cr> 99%. How is Minor Metals Produced and Manufactured? During the minor metals manufacturing from refractory metal suppliers, the main downstream products of rare earths, the main products in the small metal industry, are catalysts, permanent magnets and glass, which account for 21%, 18% and 16% of the demand for rare earths, respectively. The downstream products of tungsten are mainly hard alloy, alloy steel and tungsten, whose demand for tungsten accounts for 52%, 30% and 13% respectively. Molybdenum is mainly used in construction steel, stainless steel, catalyst and chemical industry and tool steel and other fields, among which the former two demand for molybdenum accounted for more than 60% of the total market demand for molybdenum. In addition, antimony is mainly used in flame retardant, tin is mainly used in solder, indium is mainly used in indium tin, and germanium is mainly used in PET, optical fiber and infrared optics, not mainly used in aluminum alloy, casting and steel making desulfurization and other fields.
ASTM B111 C44300 tube is widely used in the surface condenser, heat exchanger, and evaporators. The C44300 tube offers high strength, excellent corrosion resistance, and good creep resistance at elevated temperatures. SB111 C44300 TUBE HIGHLIGHTS SB111 C44300 material has the following benefits: Durability â?? The structure and chemical composition of an SB111 C44300 make it durable. This kind of ASTM B111 tube can last up to 10 years, depending on where you are using them and the frequency of use. WHAT IS THE DIFFERENCE BETWEEN SB111 C44300 TUBE AND THE SB111 C70600 PIPE? The main difference between the SB111 C44300 tube and astm b111 c70600 lies in the material composition and their specific applications. Here are the key distinctions: SB111 C44300 AND C70600 MATERIAL COMPOSITION: SB111 C44300 Tube: C44300 is a copper alloy pipe known as Admiralty Brass, which primarily consists of copper (Cu) with small amounts of zinc (Zn) and trace elements. It is a non-ferrous alloy with good corrosion resistance and excellent thermal conductivity. SB111 C70600 Pipe: C70600 is a copper-nickel alloy known as 90/10 Copper-Nickel, which contains approximately 90% copper (Cu) and 10% nickel (Ni). It also includes small amounts of other elements such as iron (Fe) and manganese (Mn). This alloy offers high resistance to corrosion, particularly in marine environments, and has good mechanical properties. C44300 and C70600 tubes Applications: SB111 C44300 Tube: C44300 tubes are commonly used in heat exchangers, condensers, and other applications where efficient heat transfer and resistance to corrosion are required, such as heat exchanger pipes. They are suitable for use in both freshwater and seawater environments. SB111 C70600 Pipe: C70600 pipes, due to their excellent corrosion resistance, are widely used in marine applications such as seawater cooling systems, shipbuilding, and offshore installations. They are specifically designed to withstand the harsh conditions of saltwater environments. C44300 and C70600 Mechanical Properties: SB111 C44300 Tube: Admiralty Brass (C44300) has good formability, making it easy to bend and shape during installation. It possesses moderate strength and can handle moderate pressures and temperatures. SB111 C70600 Pipe: 90/10 Copper-Nickel (C70600) has higher strength compared to Admiralty Brass. It exhibits good mechanical properties, including high tensile and yield strength, making it suitable for applications requiring higher pressure and temperature ratings. It is important to consider the specific requirements of the application, including the operating conditions, fluid characteristics, and corrosion resistance needed, when selecting between the SB111 C44300 tube and the SB111 C70600 pipe. Consulting the appropriate specifications and guidelines for the intended use is crucial to ensure the optimal choice of material.
ASTM B163 is the Specification for Seamless Nickel and Nickel Alloy Condenser and Heat-exchanger Tubes. This covers outside diameter and average wall, or outside diameter and minimum wall tube. The tube shall be furnished in the alloys and conditions defined by this specification. The ASTM B163/ASME SB163 material shall conform to the composition limits of nickel, copper, molybdenum, iron, manganese, carbon, silicon, chromium, aluminum, titanium, phosphorus, cerium, and zirconium, yttrium, boron, cobalt, columbium, tungsten, and nitrogen specified. Tensile strength, yield strength, elongation, and Rockwell hardness of the material shall conform to the required Mechanical Properties set by this specification. Test methods such as chemical analysis, tension, rounding procedure, Rockwell hardness, grain size, and hardness conversion shall be performed for qualified ASTM B163/ASME SB163 alloy tubes. ASTM B163/ASME SB163 NICKEL ALLOY PIPE/TUBE PROVIDED BY YUHONG ASTM B163/ASME SB163 Nickel Alloy Pipe/Tube The most popular materials under ASTM B163 Standard are: UNS N04400(Monel 400); UNS N06600(Inconel 600); UNS N08800(Inconel 800); UNS N08810(Incoloy 800H); UNS N08811(Incoloy 800HT); UNS N08825(Incoloy 825). Incoloy 800/N08800 Nickel Alloy Pipe/Tube Incoloy 800H/N08810 Nickel Alloy Pipe/Tube Incoloy 800HT/N08811 Nickel Alloy Pipe/Tube Incoloy 825/N08825 Nickel Alloy Pipe/Tube Inconel 600/ N06600 Nickel Alloy Pipe/Tube Inconel 601/ N06601 Nickel Alloy Pipe/Tube Monel 400/N04400 Nickel Alloy Pipe/Tube Nickel 200/N02200 Nickel Seamless Pipe/Tube ASTM B163/ASME SB163 Nickel Alloy Pipe/Tube ASTM B163/ASME SB163 NICKEL ALLOY PIPE/TUBE FEATURES Nickel alloys tube under ASTM B163 can meet the High Strength and corrosion resistance in a range of media including sea water, hydrofluoric acid, sulphuric acid, and alkalies. ASTM A163 Coiled Tubing is highly resistant to corrosion in different environments. This tubing enables the speed of the operation to be fast at the same time, it is very safe and easy to run. ASTM B 163 Tubing is used in applications for drilling, logging, fracturing, perforating, and production operations. These tubings have a lower environmental impact. If you are looking for a reliable ss pipe company, don't hesitate to contact us!
