Thermo-siphon solar water heater The feed water tank can automatically supply the water when you using the system. The cold water can be warm up when it flowing into the copper pipe. This patent broke the tradition of hot water using in the water tank. The volume of hot water is not limit for tank volume, and it founded the new times of hot water. Carton
Pedometer 1. 5 lcd manifestation 2. Count can from 0-99999 3. Account the step automatically 4. Press the button to reset once 54x34x35cm
Wireless Installation: Wireless communication between the water meter and outdoor device which can be easily attached to the wall. Battery Life: The low-power design enables the water meter to last longer than 10 years.
Installation of Electronic Water Meter + Wireless Outdoor Display This is Koreaâ??s first electronic water meter that is embedded with a wireless communication module, which requires no connection between the water meter and the outdoor display. Traditional water meters use communication lines to connect to external displays, making the installation difficult and costly. Also, the limited installation space results in inefficient meter-reading. The SES electronic water meter is equipped with a wireless module inside, which does not require any extra communication line work to connect to the outdoor display. This means that installation costs can be significantly reduced by just attaching it to a wall without the need for any installation work, and space is not limited, which helps to improve the meter-reading environment.
What's the introduction of micro oval gear flow meter Micro oval gear low flow meter is a kind of oval gear flow meter , along to positive displacement flow meter. There is thousands of manufacturers who can produce oval gear flow meter. But only several manufacturer who have technology to produce micro liquid flow meter. Micro oval gear flow meter offer the highest accuracy and measure for various viscosity liquid. Special patent technology to measure flow from 0.1ml/min and ensure working life more 5 years. Micro oval gear low flow meter is wildly used for various industries for precision measurement. So far it has been serviced for more 100 using condition, such as fuel oil measurement, adhesive control , hydraulic life cycle testing, electrolyte dosing, natural gas odorization. What's the main features of micro oval gear flow meter 1) anti-dust, anti-vibration, anti-corrosive&explosion-proof. 2) max accuracy up to 0.2% 3) min flow : 0.1ml/min 4) max temperature: 200c 5) max pressure: 1000bar 6) viscosity liquid:0.3~10000cps.
What's the introduction of micro oval gear flow meter Micro oval gear low flow meter is a kind of oval gear flow meter , along to positive displacement flow meter. There is thousands of manufacturers who can produce oval gear flow meter. But only several manufacturer who have technology to produce micro liquid flow meter. Micro oval gear flow meter offer the highest accuracy and measure for various viscosity liquid. Special patent technology to measure flow from 0.1ml/min and ensure working life more 5 years. Micro oval gear low flow meter is wildly used for various industries for precision measurement. So far it has been serviced for more 100 using condition, such as fuel oil measurement, adhesive control , hydraulic life cycle testing, electrolyte dosing, natural gas odorization. What's the main features of micro oval gear flow meter 1) anti-dust, anti-vibration, anti-corrosive&explosion-proof. 2) max accuracy up to 0.2% 3) min flow : 0.1ml/min 4) max temperature: 200c 5) max pressure: 1000bar 6) viscosity liquid:0.3~10000cps.
Waterproof ph meter with backlight Specifications Range 0.0 to 14.0 ph Resolution: 0.1 ph Accuracy : ±0.01 ph Typical emc deviation ±0.1 ph Calibration: manual, 1 point, Temperature compensation automatic: 0 to 50 Environment: 0 to 50 (32 to 122f); Rh max 95% Battery type 4 x 1.5v alkaline Battery life approx. 200 hours of use Dimensions 152 x 30 x 21 mm (5.9 x 1.2 x 0.8") Weight: 53 g Operation Remove the protective cap. Do not be alarmed if white crystals Appear around the cap. This is normal with ph electrodes and They dissolve when rinsed with water. Turn the meter on sliding the switch on the top. Immerse into solution up to the max immersion level. ?¢ stir gently and wait until the display stabilizes. Readings are automatically compensated for temperature variations. After use, switch off ph meter, use the water clean the electrode and replace the protective cap. Do not use distilled or deionized water for storage purposes. Large fluctuations in readings could be due to lack of calibration, dry electrode or rundown batteries. Calibration Immerse the tester up to the maximum immersion level in ph 6.86 buffer solution Allow the reading to stabilize and using a small screwdriver adjust the calibration trimmer to read 6.9. Calibration is now complete. Always use fresh buffers for calibration. Battery replacement When the meter cannot be switched on or the display fades, pull out the battery compartment and replace all three 1.5v batteries, while paying attention to their polarity. Batteries should only be replaced in a safe area using the battery type specified in this instruction manual.
What's the introduction of micro oval gear flow meter Micro oval gear low flow meter is a kind of oval gear flow meter , along to positive displacement flow meter. There is thousands of manufacturers who can produce oval gear flow meter. But only several manufacturer who have technology to produce micro liquid flow meter. Micro oval gear flow meter offer the highest accuracy and measure for various viscosity liquid. Special patent technology to measure flow from 0.1ml/min and ensure working life more 5 years. Micro oval gear low flow meter is wildly used for various industries for precision measurement. So far it has been serviced for more 100 using condition, such as fuel oil measurement, adhesive control , hydraulic life cycle testing, electrolyte dosing, natural gas odorization. What's the main features of micro oval gear flow meter 1) anti-dust, anti-vibration, anti-corrosive&explosion-proof. 2) max accuracy up to 0.2% 3) min flow : 0.1ml/min 4) max temperature: 200c 5) max pressure: 1000bar 6) viscosity liquid:0.3~10000cps.
ORP-986 is high precision pen type ORP meter is a nice waterproof type ORP test pen , very suitable for field application; All the reading through automatic temperature compensation (ATC);.Temperature sensor in direct contact with the measured solution makes the reading accurate and fast. Large screen display, high resolution and precision can keep reading convenient, fast and accurate. Low pressure hint, power saving, high precision, wide measuring range, accurate measurement ,simple operation, strong and durable, economical and practical. It can completely meet all kinds of industry test needs. z
Feeder of Raw meal includes steady flow feeder, mass flow meter, gas-solid injector and FB-DACS5000 control system. It has a great effect on improving the stability of kiln working conditions, improving the working time and clinker strength, saving energy and prolongs the service life of refractory materials. Accuracy: +/- 0.5% Weighing Range: 100-1200 m3/h
1.Dual SIM card(Failover mode) 2.Supports OpenVPN which rescue data security 3.Supports Mainstream cloud platform protocols(MQTT SSL, AWS IOT�¯�¼?Azure, Ali Cloud and Huawei Cloud) 4.Various I/O ports(4AI,2DI and 2DO ) 5.Quick access to cloud platform with RS485 master and support Modbus to convert MQTT 6.Automatically monitor the status of LAN port (disconnect alarm) to realize real-time monitoring of the network.
Walsn Coriolis Mass Flowmeter Product Features 1) Highly sensitive trapezoidal shape 2) Closed loop controller on ASIC for improved response time and 2-phase flow performance 3) Dynamically balanced tubes for enhanced accuracy Pressure and dual temperature compensation Main Process Fluids Coriolis mass flowmeters are ideal for oils, gases/vapors and two-phase flows. Typical Applications 1) Density Measurement & Control 2) Chemical Injection 3) Reactor feed 4) Mass balance control
Pipe type ultrasonic flowmeter is composed of a main body and a pipe segment type sensor. The DN15-DN32 uses a -type pipe segment sensor, and the DN40 and above uses a standard pipe segment sensor. The pipe-type ultrasonic flowmeter has the advantages of simple installation, low starting flow, high measurement accuracy, and no pressure loss. The main unit can be installed in the wall, instrument box, and distribution box with a protection level of IP67. The external clip sensor is installed on the surface of the pipe and selects different sensors. The applicable diameter is DN15~DN6000.
JC040 Vortex Natural Gas Flow Meter JC-040 series smart precession whirlpool flowmeter uses new microprocessing techn ology with strong function, wide flow range, simple maintenance and co nvenient installation & use. It is widely used in industries such as petrol, chemical, power, metallurgy and coal, etc. BCST Natural Gas Flow Meter Feature� 1.� Built-in pressure, temperature and flow sensors with high safety, compact structure and exquisite shape. 2.� Local indication of temperature, pressure, instantaneous flow and accumulative flow. 3.� Use new signal processing amplifier and unique filtration technology, effectively eliminate interfering signal generated by pressure fluctuation and pipeline vibration, greatly improve anti-interference ability of flowmeter, and make good stability of little flow. 4.� Special time indication and real-time data storage function; under no circumstance will the internal data be missing and will be stored forever. 5.� Password protection 6.� Low power consumption, internal battery supply, no need for external power supply. If you want to know more about this product, you can click the link below 1. Specification, basic data and performance
JC091 Insertion Remote Electromagnetic Flowmeter BCST Battery Electromagnetic Flowmeter is a new fluid flowmeter developed based on pipe-type electromagnetic flowmeter. Besides preserving the merits of pipe-type electromagnetic flowmeter and considering such defects of pipe-type electromagnetic flowmeter as difficult installation on large pipes and high cost. Compared to ordinary electromagnetic flowmeter, sensor of BCST insertion electromagnetic flowmeter generates external emission magnetic field on outer side. The measuring electrodes are at the ends or on both sides of the sensor. Principle of electromagnetic flowmeter� is shown in the figure below. It is noteworthy that in external emission magnetic field, the induction signal of electromagnetic flow sensor will reduce the linearity of measurement in case of being affected by fluid and thickness of the magnetic field's boundary layer. In terms of� JC091� insertion electromagnetic flowmeter, conducting liquid in pipeline is the conductor moving in magnetic field and distance between two electrodes is the length (L) of conductor.� Accuracy �±0.5%~�±1.5% (under reference conditions) Caliber (mm) DN100~DN3000 DN100~DN3000 Flange Conforming to GB9119, stainless steel Pressure rating 1.6MPa Material of converter housing Die-cast aluminum alloy Material of sensor housing Stainless steel Material of sensor structure Stainless steel/PVDF Weight 6 kg Electrical conductivity ¼s/cm (negotiate with us for ordering in case of less than 5¼s/cm)
Pipe type ultrasonic flowmeter is composed of a main body and a pipe segment type sensor. The DN15-DN32 uses a -type pipe segment sensor, and the DN40 and above uses a standard pipe segment sensor. The pipe-type ultrasonic flowmeter has the advantages of simple installation, low starting flow, high measurement accuracy, and no pressure loss.The applicable diameter is DN15~DN6000.
Plug-in ultrasonic flowmeter is composed of a main body and an external clip type sensor. Simply attach the clip-on sensor to the surface of the pipe to complete the flow measurement of various liquids. Compared with the traditional flow meter, it does not need to cut off the tube, and the installation is quick and convenient, realizing the non-destructive installation. Both the main unit and the sensor are mounted on the pipeline with protection class IP68. The external clip type sensor is installed on the surface of the pipe, and different sensors are selected. The applicable diameter is DN50~DN6000.
External clip type ultrasonic flowmeter is composed of a main body and an external clip type sensor. Simply attach the clip-on sensor to the surface of the pipe to complete the flow measurement of various liquids. Compared with the traditional flow meter, it does not need to cut off the tube, and the installation is quick and convenient, realizing the non-destructive installation. The main unit can be installed in the wall, instrument box and distribution box, and the protection level can reach IP67. The external clip type sensor is installed on the surface of the pipe, and different sensors are selected. The applicable diameter is DN15~DN6000.
Portable ultrasonic flow meter enables non-contact measurement of liquid flow. By installing the sensor on the outer wall of the pipe, the flow measurement can be completed, which is convenient and accurate. Built-in printer and SD card memory for immediate or timed printing of set measurements. It is widely used in tap water, heating, water conservancy, metallurgy, chemical, machinery, energy and other industries, can be used for production testing, flow comparison, temporary monitoring, is a necessary tool for flow detection.
We are TRUIN robot manucfacture from China, supply industrial robot including welding robot ,handling robot and Scara robot. Payload includes: 3 kg, 10kg, 20kg, 30kg, 50kg, 60kg, 165lg, 210kg, etc.