Electric Room Heaters Suppliers and Manufacturers

Wall Mist Fan design principle The mist fan was designed with the advanced principle of double atomization. The water drips are jetted under the diffusion of the rotating plate and atomized equipment; reduce the diameter of the atomized water drip to 10 um under the centrifugal force. Hence improve the atomization surface area. The atomized water drips are jetted out with gas flow and it improves the surface speed of liquid greatly, speedup the diffusion of the gas molecule, therefore increase the quantity of the evaporation. Also the evaporation absorbs the heat and decreases the temperature, improves the relative humidity and reduces the dust. Main parts (1) Fan motor (2) Impeller (3) Fan guards (4) Jet plate (5) Water tank (6) Pump (7) Switch box (Wall) Parameter (1) Dimension: 650 mm (26inches) (2) Voltage: 220 ~ 240V (3) Fan height: adjustable from 1700mm to 2000mm (4) Fan oscillation adjustable: 90 degrees automatically (5) Fan tilt adjustable: 30 degrees (6) Available area: 50 square meters (7) Temperatures drop: 4 íµ- 8 íµ (8) Operation Temperature: 20 íµ- 80 íµ (9) Operation Humidity: 20% - 85% (10) Quantity of atomization: 0 - 8L/h (11) Diameter of atomized drip: < 10 um (12) Capacity(Wall): 10 L (13) Jet distance: 8 m (14) G.W: 17.1KG; CBM: 0.093M3 Characteristics (1) Thin atomized water drips, long range of spraying, no water dropping. (2) No special demand of the quality of the water and water pressure. (3) Single used, fine enginery, more agile, wide range of using. (4) Easy to install, convenient to move. (5) 90 degrees oscillation, three speed control, blowing without atomization. (6) Waterproof electric design, safe use (7) Adjustable misting volume, low noise Application The atomized fan was widely used in the public situation without air-condition such as store, wine floor, plant, mill, medicine shop, hothouse canopy, fowl house, fungus planting, tea processing where need ventilation, reducing heat and improving humidity. Advantage (1) Compared with the foreign product, we adopt the high quality material---rustproof steel, overcome the problem of dirty forming and cleaning. (2) Compared with the atomized system with nozzle and plenum pump, our fan can't be blocked and without high pressure. (3) No need to maintenance, saving power and water, with lower cost, compared with the system with central air-condition and jet house. (4) Overcome the disadvantage of large air resistance and slow reduction of temperature compared with the system of wet shade. We can also supply: (1) Mist fan AM-650GH; (2) Mist fan AM-650GB; (3) Mist fan AM-650GT; (4) Mist fan AM-650C; (5) Mist Fan AM-702F20 It include four boxes: (1)Box 1:POLE 125CM*8CM*15CM (2)Box 2:WATER TANK 47CM*42CM*43CM (3)Box 3:GUARDS AND IMPELLER 72CM*72CM*7CM (4)Box 4:FAN MOTOR,PUSH PEDESTAL,JET PLATE,WATER PUMP 72CM*52CM*20CM

Air Cooler design principle The mist fan was designed with the advanced principle of double atomization. The water drips are jetted under the diffusion of the rotating plate and atomized equipment; reduce the diameter of the atomized water drip to 10 um under the centrifugal force. Hence improve the atomization surface area. The atomized water drips are jetted out with gas flow and it improves the surface speed of liquid greatly, speedup the diffusion of the gas molecule, therefore increase the quantity of the evaporation. Also the evaporation absorbs the heat and decreases the temperature, improves the relative humidity and reduces the dust. Main parts (1) Fan motor (2) Impeller (3) Fan guards (4) Jet plate (5) Water tank (6) Pump (7) Standing pole (Ground) (8) Push pedestal (Ground) (9) Switch box (Wall) Parameter (1) Dimension: 650 mm (26inches) (2) Voltage: 220 ~ 240V (3) Fan height: adjustable from 1700mm to 2000mm (4) Fan oscillation adjustable: 90 degrees automatically (5) Fan tilt adjustable: 30 degrees (6) Available area: 50 square meters (7) Temperatures drop: 4 íµ- 8 íµ (8) Operation Temperature: 20 íµ- 80 íµ (9) Operation Humidity: 20% - 85% (10) Quantity of atomization: 0 - 8L/h (11) Diameter of atomized drip: < 10 um (12) Capacity (Ground):38 L (13) Jet distance: 8 m (14) G.W: 24.4KG; CBM: 0.118M3 Characteristics (1) Thin atomized water drips, long range of spraying, no water dropping. (2) No special demand of the quality of the water and water pressure. (3) Single used, fine enginery, more agile, wide range of using. (4) Easy to install, convenient to move. (5) 90 degrees oscillation, three speed control, blowing without atomization. (6) Waterproof electric design, safe use (7) Adjustable misting volume, low noise Application The atomized fan was widely used in the public situation without air-condition such as store, wine floor, plant, mill, medicine shop, hothouse canopy, fowl house, fungus planting, tea processing where need ventilation, reducing heat and improving humidity. Advantage (1) Compared with the foreign product, we adopt the high quality material---rustproof steel, overcome the problem of dirty forming and cleaning. (2) Compared with the atomized system with nozzle and plenum pump, our mist fan can't be blocked and without high pressure. (3) No need to maintenance, saving power and water, with lower cost, compared with the system with central air-condition and jet house. (4) Overcome the disadvantage of large air resistance and slow reduction of temperature compared with the system of wet shade. We can also supply: (1) Mist fan AM-650GH; (2) Mist fan AM-650GT; (3) Mist fan AM-650W; (4) Mist fan AM-650C; (5) Mist fan AM-702F20 It include four boxes: (1)Box 1:POLE 125CM*8CM*15CM (2)Box 2:WATER TANK 47CM*42CM*43CM (3)Box 3:GUARDS AND IMPELLER 72CM*72CM*7CM (4)Box 4:FAN MOTOR,PUSH PEDESTAL,JET PLATE,WATER PUMP 72CM*52CM*20CM

EWH water heaters with the brand name ( STAR ) a trusted name which enjoys the confidence and support from our satisfied customers. Our products range with sizes from 30 Liters to 100 Liters and the outer body is made of EPOXY which increase the products rust resistant and improve its resistant against external weather factors. Design and Formations: • Star Water Heater tank made from iron panels according to the specifications. • Insulation layer to preserve the temperature for long period and prevent the leakage. • The external cover painted by resistance layer to the rust and weather factors. • Water intake and out put pines rust proof. • High quality heat unit. • High quality lower safety valve. • Easily control of the temperature. • Available with following sizes: • 30 liters, 50 liters, 80liters and 100 liters (Electricity 220/127). Storage / Tankless Storage Installation Wall Mounted Certification SASO, ISO Housing Material Stainless Steel Capacity 50 Power (W) 1200 Voltage (V) 220 Place of Origin Saudi Arabia Brand Name Star Electrical Water Heaters Model Number Star 30 Liter Water Heater vertical or horizontal White.

HYDK-Floor convector with fan (heating and cooling, fan coil): This type of fan coils enjoy good heating and cooling performance, mainly used as office heater, shool heat of office space heaters,Short delivery times for our standard trenches.Cost-effective efficient heating and cooling at low noise levels.Add a condensation pump to drain condensation.Adjustable leveling bolt and filter screen. Pls contact us for more information of the Floor Convectors.

HYDK-Floor convector with fan (heating and cooling, fan coil): This type of fan coils enjoy good heating and cooling performance, mainly used as office heater, shool heat of office space heaters,Short delivery times for our standard trenches.Cost-effective efficient heating and cooling at low noise levels.Add a condensation pump to drain condensation.Adjustable leveling bolt and filter screen. Pls contact us for more information of the Floor Convectors.

Top Mounted Air Coolers Product Description: Top-mounted series air cooler mainly used with various condensing units in cold storage warehouses. Top-mounted air coolers has three serious :DL/DD/DJ series.DL series suit for cold room of 0.DD series suit for cold room of -18.And DJ series suit for cold room of -23. Casing: Utilizing high quality stainless plate and coating processing,anti-corrosion,the appearance is smooth and beautiful. Heat Exchange Coil: The evaporator utilizes thin walled steel tube and aluminum fins after twice processing. The tube has high heat changing efficiency. Corrugated aluminum fins,fin spacing 4mm,6mm and 8mm. Fans: External rotor motor.The motor anti moisture,anti low temperature large air flow,low noise and reliable working.Fan specification 300-500mm,Number from 1 to 4. Electric Defrost The defrosting system is made up of stainless steel tube which is laid in the coil.The defrosting is time saving and effective .