Application This oil purification plant is applied to filter various of unqualified insulation oils including aging transformer oil specially for the power which is above 110KV, mutual inductor oil, switch oil and so on. Also it can inject the insulating oil into the transformers on-line. Features: 1. High vacuum: High point-Vacuum5pa Working-vacuum35pa 2. High absorption speed: Absorption speed power333L/Sr. 3. Duplex 3D stereo-evaporation, eliminating the liquid water quickly 4. UK G technology by which the trace water that is show chain, such as dissolved water, can be removed effectively. 5. Distinctive removing impurities system filtering through double FH trapezoidal network and absorbing by high polymer without the mechanical power 6. Carbon fiber infrared heating system that can make the oil contains zero sum of ethyne after the treatment 7. Especially applied to vacuum oiling and drying for power transmission equipments which are over 110KV 8. The oil of any grades can be treated on line at the working site.
Application It is mainly used for purifying the insulating oil in all kinds of large power equipment that are above 110KV especially for the area, where height is over 500 meters. Feature 1. High vacuum: High point-Vacuum=35pa 2. High absorption speed: Absorption speed power>=333L/Sr. 3. Duplex 3D stereo-evaporation, eliminating the liquid water quickly 4. UK G technology by which the trace water that is show chain, such as dissolved water, can be removed effectively. 5. Distinctive remove impurities system filtering through double FH trapezoidal network and absorbing by high polymer without the mechanical power. 6. Especially applied to vacuum oiling and drying for power transmission equipment that are over 110KV 7. Can be operated both on-load and off-load. Advantage 1.Comparing with the single-stage vacuum oil purifier, this machine dewaters, degases and removes the impurities more quickly, more completely. 2. and makes the oils limiting voltage-withstand value much higher. 3.As the bridge-type vacuum linking system, it is used for filtrating system as well as an independent vacuum power supply to vacuum oiling of power equipment.
Application: It is mainly used for purifying the insulating oil in all kinds of large power equipment that are above 110KV especially for the area, where altitude is over 500 meters. Feature 1.High vacuum: High point-Vacuum=35pa 2.High absorption speed: Absorption speed power>=333L/Sr. 3.Duplex 3D stereo-evaporation, eliminating the liquid water quickly 4.UK G technology by which the trace water that is show chain, such as dissolved water, can be removed effectively. 5.Distinctive removing impurities system filtering through double FH trapezoidal network and absorbing by high polymer without the mechanical power 6.Effectively remove the oxidation, free carbon etc. 7.Especially applied to vacuum oiling and drying for power transmission equipment that are over 110KV 8.Can be operated both on-load and off-load. Advantage Comparing with the single-stage vacuum oil purifier, this machine dewaters, Degases and removes the impurities more quickly, more completely. It not only improves the oils breakdown voltage value much higher but also can recover the oil anti-oxidation, Acidity and so on. As the bridge-type vacuum linking system, it is used for filtrating system as well as an independent vacuum power supply to vacuum oiling of power equipment.
Name RT200-8 Engine Type 167FML�CGP200� Bore�Stroke�mm� 67�55.7 Displacement�mL� 196.4 Max. Power�kw/rpm� 10.5/7500 Max. Torque�N.m /rpm� 14.0/6000 Fuel Tank Capacity�L� 16 Gear 5-Speed Gearshift Transmission Mode Chain drive Start Mode Electric/kick Max. Speed�km/h� �100 Front Tires 110/70-17 Rear Tires 140/70-17 Front Brake Disc Brake Rear Brake Disc Brake Dry Weight�kg� 134 Compression Ratio 9.2:1 Fuel Consumption�L/100 km� 2.6 Ignition Mode CDI Min. Ground Clearance�mm� 180 Product Dimensions�mm�mm�mm� 2040�770�1100 Seat Hight�mm� Front�820/Rear�935 Wheelbase�mm� 1410 Loading Capacity�kg� 150 Climbing Ability�°� 24 Min. Turning Radius�mm� 2340
The RFID pin is a replacement of the traditional pin used with the EAS tag. It has a unique ID and can store additional information. It upgrades the EAS system, provides more advanced functions. It is encased with rough plastic,with the advantage of durable and reusable, offers cost-effective tagging solutions for industry customers and enables inventory visibility throughout the supply chain reducing shrinkage and out-of-stocks. Physical Features: Model RC9603 Name UHF Smart Security Pin Tag Material ABS Dimensions 40*22mm IP Code IP54 Weight 2.70g Working Temp -20â??ï½?+80â?? Storage Temp -40â??ï½?+80â?? RFID Features: RFID Standard:EPC C1G2 (ISO18000-6C) Chip Type:Impinj Monza 4QT / Higgs 3 EPC Memory 128 bits User Memory 512 bits Read Range (RFID) >3.0 m Application Clothes security anti-theft Apparel logistic tracking Apparel retail management, Clothes inventory management, Other items security control,etc
ZB6218-6 quality Triangle Quick Links Locking Carabiner Clips stainless steel Delta Quick Link MATERIAL: This delta quick link is made of marine grade stainless steel for maximum corrosion resistance and durability. The triangle quick link is ideal for marine and industrial rigging and linking applications. MULTI-APPLICATIONS: The triangular-shaped quick link is designed for attaching either three things together without them bunching up all, creating a t-junction. EASY TO USE: stainless steel chain quick connector is perfect for fast connection between chains and ropes. Design of threaded end and hex nut provide tight and secure connections. SPECIFICATION: This stainless steel triangle carabiner has excellent strength and toughness due to its marine grade raw material. Wudi Zhibo Metals Co., LTD is located in the Wudi town Shandong Province which is beautiful and rich shore of Bohai Sea. Our company possesses the advantaged position on the verge of Qingdao and Tianjin ports. And we have convenient transportation extend in all directions in China, especially to Beijing city. Wudi Zhibo Metals Co., LTD is meanly engaged in the metal products. Our business is a system includes the designing, production, machining and selling. Our products are camlock coupling, rigging hardware, marine hardware, auto accessories ,as well as the machine parts .According to the standards of API ANSI BS DIN JIS, the products are made to pretty , rational construction, superior performance. The material of our products is kinds of stainless steel ,such as 304\316\316L ;aluminum; brass; pp; nylon and carbon steel. The products are used in many area covering the marine transport, petrochemical industry, Pharmaceutical papermaking, food industry ,electricity industry and so on. Our products are exported to America England, France, Canada, Australia, Holland, Japan and Korea, and the domestic market is vast too,which gain many trust and favorable receptions home and abroad. From the established to now, Wudi Zhibo Metals Co., LTD obedience to the idea of "Quality First, Creditable Management " and objective of the "Win-Win", all the staffs are devote to the technological innovation, building enterprise brand ,to meet the needs of the clients. Welcome the friends worldwide to visit our company and make business negotiations.
We take your Custom Wood Manufacturing from prototype to shelf We can highly customize your product with qualities unique to your company. From our custom wood products, we can take your product to completion because we are always a reliable part of your supply chain. Request a quote from one of our knowledgeable salespeople today. Custom Wood Manufacturing are found everywhere in consumer, commercial and industrial markets. They range from large building support to home decor, musical instruments and furniture. At All Win , we specialize in standard and custom wood products to meet our customers' needs for longevity, style and high quality. Our manufacturing facility produces a wide range of wood products and components to bring unique products to life. Our in-house experts examine the wood to find the right strength, density, grain and wood type for each project based on its design specifications and intended application. We then grind, process and finish the product from start to finish before delivering the finished product to the next step in your supply chain. Categories of Custom Wood Manufacturing Furniture. This category offers any wooden furniture of your choice: dining tables, coffee tables, sideboards, armchairs, sofas, beds, stools, children's furniture. You can configure your wooden furniture by wood type, colour, size, design and style: modern, art deco, high-tech, minimalist, loft, etc. Decorative style. Decorative and decorative woodwork is best suited to decorate rooms and create a cosy atmosphere. You can model them yourself and we can make them come true. We will create customised decorative items such as wooden interior paintings, wooden wall clocks, wooden framed mirrors and much more, to suit any room style from modern to classic. Colours, sizes, wood types and shapes: create unique products to suit your own projects. Accessories. Wooden clocks, organisers, stands, key fobs, laptop mini-tables, boxes - we will make all these home furnishings to your individual order so that you can live in comfort. If you want to print your own logo, initials, choice of material, product shape, then go ahead! Together with Allwin you can create all your fantasies in eco-wood product design.
This machine is used to packing drinking straws in three sides sealing bag, printing function is available when using paper as packing material. Characteristics: 1.Having two colors printing device can be chosen 2.With automatic product counting function, product quantity may pre-set, once the pre-set value is reached. the machine will give an alarm. And the dam-brush will separate each set quantity packaged straw. 3.Printing, feeding, and packing can complete in one processing. 4.Packing straw length is adjustable within a certain range. Specification Drink Straw Diameter(mm) 5-12mm Need change some parts. Straw Length(mm) Standard: 190-210mm Extra mould: 170-260mm By change the sealing and cutting mold, printing cylinder Packing Model Paper type: wrap paper Sealing type: 3 side sealing 25-30mmï¼?Paper width: 25-30mm Production Speed With printingï¼?300pcs/min Without printingï¼?400pcs/min Printing Printing Colorï¼?Double Colour Printing type: flexographic 2.38mm; Thickness of plate (Including Two-sides Glue Paper): 2.28mm+double-sided adhesive 0.1mm(3M Brand)=2.38mm Paper Unwinding Frame 1SET Tension adjustï¼?Mechanical tension device, adjusted by manual Wrap paper roller core sizeï¼?3inchï¼?4.7inch Straw feeding hopper Material :Stainless steel frameï¼? Plexiglass: Adjustable to match straw length Straw down deviceï¼?induction and swing arm Feeding modelï¼?by chain feeding Printing Unit Single/Double Color Power transmission ï¼?By chain Between printing unit: By gear Traction unitï¼?1sets, rubber roller and chrome plated roller Printing unitï¼?Ink container, anilox roller, doctor blade, printing cylinder, rubber roller Dry unitï¼?1SET , by hot air, with temperature color registerï¼?By manual Sealing and Cutting Parts Lengthways sealingï¼?Sealing roller-on coupleï¼?pressure adjusted by manual Horizontalï¼?Sealing roller-on coupleï¼?pressure adjusted by manual, with cutting knife-one couple Materialï¼?mould steel Conveyor Belt 1setï¼? Synchronous reduction motor+ controller Counter dam-brush: one set, lifting by pneumatic cylinder Controller Counter and buzzersï¼?1setï¼?HUALI Brand Controlling inverter: 1.1KW Schneider Temperature controllerï¼?1setï¼?KEQIANG Brand Low-voltage electric parts: Schneider Total Power (Kw) 1.5 (220V) Over size (mm) 1900Ã?1000Ã?1600 (LÃ?WÃ?H) Weight (Kg) 400
This machine is used to packing drinking straws in three sides sealing bag, printing function is available when using paper as packing material. Characteristics: 1.Having two colors printing device can be chosen 2.With automatic product counting function, product quantity may pre-set, once the pre-set value is reached. the machine will give an alarm. And the dam-brush will separate each set quantity packaged straw. 3.Printing, feeding, and packing can complete in one processing. 4.Packing straw length is adjustable within a certain range. Specification Drink Straw Diameter(mm) 5-12mm Need change some parts. Straw Length(mm) Standard: 190-210mm Extra mould: 170-260mm By change the sealing and cutting mold, printing cylinder Packing Model Paper type: wrap paper Sealing type: 3 side sealing 25-30mmï¼?Paper width: 25-30mm Production Speed With printingï¼?300pcs/min Without printingï¼?400pcs/min Printing Printing Colorï¼?Double Colour Printing type: flexographic 2.38mm; Thickness of plate (Including Two-sides Glue Paper): 2.28mm+double-sided adhesive 0.1mm(3M Brand)=2.38mm Paper Unwinding Frame 1SET Tension adjustï¼?Mechanical tension device, adjusted by manual Wrap paper roller core sizeï¼?3inchï¼?4.7inch Straw feeding hopper Material :Stainless steel frameï¼? Plexiglass: Adjustable to match straw length Straw down deviceï¼?induction and swing arm Feeding modelï¼?by chain feeding Printing Unit Single/Double Color Power transmission ï¼?By chain Between printing unit: By gear Traction unitï¼?1sets, rubber roller and chrome plated roller Printing unitï¼?Ink container, anilox roller, doctor blade, printing cylinder, rubber roller Dry unitï¼?1SET , by hot air, with temperature color registerï¼?By manual Sealing and Cutting Parts Lengthways sealingï¼?Sealing roller-on coupleï¼?pressure adjusted by manual Horizontalï¼?Sealing roller-on coupleï¼?pressure adjusted by manual, with cutting knife-one couple Materialï¼?mould steel Conveyor Belt 1setï¼? Synchronous reduction motor+ controller Counter dam-brush: one set, lifting by pneumatic cylinder Controller Counter and buzzersï¼?1setï¼?HUALI Brand Controlling inverter: 1.1KW Schneider Temperature controllerï¼?1setï¼?KEQIANG Brand Low-voltage electric parts: Schneider Total Power (Kw) 1.5 (220V) Over size (mm) 1900Ã?1000Ã?1600 (LÃ?WÃ?H) Weight (Kg) 400
This machine is used to packing drinking straws in three sides sealing bag, printing function is available when using paper as packing material. Characteristics: 1.Having two colors printing device can be chosen 2.With automatic product counting function, product quantity may pre-set, once the pre-set value is reached. the machine will give an alarm. And the dam-brush will separate each set quantity packaged straw. 3.Printing, feeding, and packing can complete in one processing. 4.Packing straw length is adjustable within a certain range. Specification Drink Straw Diameter(mm) 5-12mm Need change some parts. Straw Length(mm) Standard: 190-210mm Extra mould: 170-260mm By change the sealing and cutting mold, printing cylinder Packing Model Paper type: wrap paper Sealing type: 3 side sealing 25-30mmï¼?Paper width: 25-30mm Production Speed With printingï¼?300pcs/min Without printingï¼?400pcs/min Printing Printing Colorï¼?Double Colour Printing type: flexographic 2.38mm; Thickness of plate (Including Two-sides Glue Paper): 2.28mm+double-sided adhesive 0.1mm(3M Brand)=2.38mm Paper Unwinding Frame 1SET Tension adjustï¼?Mechanical tension device, adjusted by manual Wrap paper roller core sizeï¼?3inchï¼?4.7inch Straw feeding hopper Material :Stainless steel frameï¼? Plexiglass: Adjustable to match straw length Straw down deviceï¼?induction and swing arm Feeding modelï¼?by chain feeding Printing Unit Single/Double Color Power transmission ï¼?By chain Between printing unit: By gear Traction unitï¼?1sets, rubber roller and chrome plated roller Printing unitï¼?Ink container, anilox roller, doctor blade, printing cylinder, rubber roller Dry unitï¼?1SET , by hot air, with temperature color registerï¼?By manual Sealing and Cutting Parts Lengthways sealingï¼?Sealing roller-on coupleï¼?pressure adjusted by manual Horizontalï¼?Sealing roller-on coupleï¼?pressure adjusted by manual, with cutting knife-one couple Materialï¼?mould steel Conveyor Belt 1setï¼? Synchronous reduction motor+ controller Counter dam-brush: one set, lifting by pneumatic cylinder Controller Counter and buzzersï¼?1setï¼?HUALI Brand Controlling inverter: 1.1KW Schneider Temperature controllerï¼?1setï¼?KEQIANG Brand Low-voltage electric parts: Schneider Total Power (Kw) 1.5 (220V) Over size (mm) 1900Ã?1000Ã?1600 (LÃ?WÃ?H) Weight (Kg) 400
This machine is used to packing drinking straws in three sides sealing bag, printing function is available when using paper as packing material. Characteristics: 1.Having two colors printing device can be chosen 2.With automatic product counting function, product quantity may pre-set, once the pre-set value is reached. the machine will give an alarm. And the dam-brush will separate each set quantity packaged straw. 3.Printing, feeding, and packing can complete in one processing. 4.Packing straw length is adjustable within a certain range. Specification Drink Straw Diameter(mm) 5-12mm Need change some parts. Straw Length(mm) Standard: 190-210mm Extra mould: 170-260mm By change the sealing and cutting mold, printing cylinder Packing Model Paper type: wrap paper Sealing type: 3 side sealing 25-30mmï¼?Paper width: 25-30mm Production Speed With printingï¼?300pcs/min Without printingï¼?400pcs/min Printing Printing Colorï¼?Double Colour Printing type: flexographic 2.38mm; Thickness of plate (Including Two-sides Glue Paper): 2.28mm+double-sided adhesive 0.1mm(3M Brand)=2.38mm Paper Unwinding Frame 1SET Tension adjustï¼?Mechanical tension device, adjusted by manual Wrap paper roller core sizeï¼?3inchï¼?4.7inch Straw feeding hopper Material :Stainless steel frameï¼? Plexiglass: Adjustable to match straw length Straw down deviceï¼?induction and swing arm Feeding modelï¼?by chain feeding Printing Unit Single/Double Color Power transmission ï¼?By chain Between printing unit: By gear Traction unitï¼?1sets, rubber roller and chrome plated roller Printing unitï¼?Ink container, anilox roller, doctor blade, printing cylinder, rubber roller Dry unitï¼?1SET , by hot air, with temperature color registerï¼?By manual Sealing and Cutting Parts Lengthways sealingï¼?Sealing roller-on coupleï¼?pressure adjusted by manual Horizontalï¼?Sealing roller-on coupleï¼?pressure adjusted by manual, with cutting knife-one couple Materialï¼?mould steel Conveyor Belt 1setï¼? Synchronous reduction motor+ controller Counter dam-brush: one set, lifting by pneumatic cylinder Controller Counter and buzzersï¼?1setï¼?HUALI Brand Controlling inverter: 1.1KW Schneider Temperature controllerï¼?1setï¼?KEQIANG Brand Low-voltage electric parts: Schneider Total Power (Kw) 1.5 (220V) Over size (mm) 1900Ã?1000Ã?1600 (LÃ?WÃ?H) Weight (Kg) 400
Flat Roof-1 Skymear Flat Roof-1 is the most professional choice for mega-concerts,festivals,party and other outdoor events. It features incredible strength,stability and speedy construction,and is the best choice for rental companies. Overview Skymear Pitched Roof Systems are tower-based aluminum structures,which has superior performance,durability and tongue connection and are ideal solutions for mega-concerts,festivals,parties and other outdoor big events.This range features compact construction,optimum strength,high-tech appearance and outstanding weight loading capacities.Its pitched roof gives it a dynamic look while contributing to efficient water drainage from the canopy. All our trusses are manufactured in different sizes, length and shapes from high-grade and lightweight aluminum which are easy for transportation and setup, and are all according to European standard EN13814 and welding EN1090 and certificated by CE,TUV and SGS certifications. All our aluminum trusses are made in China.We can do OEM for your customized service and provide our factory price directly to you. Key Benefits l Material: Aluminum alloy 6082-T6/6061-T6 l Connections: Conical Coupler/Bolted Screws l Color: Black, Red, Blue, Gray, etc. and customized available l Shapes: Ladder,traingle,square,arch and round truss l Truss unit length: Straight truss 1-4m,customized l Truss size: Light duty truss-100*100mm,220*220mm,290*290mm Medium duty truss-300*300mm,390*390mm,400*400mm,450*450mm Heavy duty turss-500*600mm,600*700mm,600*900mm,670*1010mm l Feature: Non rust, light weight, strong, easy to set up l Fast connection for quick, simple and secure assembly l Operated with manual chain block or electric chain hoist l Supplied complete with internal wind bracing wires & connection accessories l PVC roof colour and side walls options l Integrated tower base / stage components available l PA wing options available on request l Full structural calculation report & build manual available Mobile Truss Clamps, Aluminum Trusses, Riser Folding Stage, Rubber Cable Protector Supplier.
Pitched Roof-1 Skymear Pitched Roof-1 is the most professional choice for mega-concerts,festivals,party and other outdoor events. It features incredible strength,stability and speedy construction,and is the best choice for rental companies Overview Skymear Pitched Roof Systems are tower-based aluminum structures,which has superior performance,durability and tongue connection and are ideal solutions for mega-concerts,festivals,parties and other outdoor big events.This range features compact construction,optimum strength,high-tech appearance and outstanding weight loading capacities.Its pitched roof gives it a dynamic look while contributing to efficient water drainage from the canopy. All our trusses are manufactured in different sizes, length and shapes from high-grade and lightweight aluminum which are easy for transportation and setup, and are all according to European standard EN13814 and welding EN1090 and certificated by CE,TUV and SGS certifications. All our aluminum trusses are made in China.We can do OEM for your customized service and provide our factory price directly to you. Key Benefits l Material: Aluminum alloy 6082-T6/6061-T6 l Connections: Conical Coupler/Bolted Screws l Color: Black, Red, Blue, Gray, etc. and customized available l Shapes: Ladder,traingle,square,arch and round truss l Truss unit length: Straight truss 1-4m,customized l Truss size: Light duty truss-100*100mm,220*220mm,290*290mm Medium duty truss-300*300mm,390*390mm,400*400mm,450*450mm Heavy duty turss-500*600mm,600*700mm,600*900mm,670*1010mm l Feature: Non rust, light weight, strong, easy to set up l Fast connection for quick, simple and secure assembly l Operated with manual chain block or electric chain hoist l Supplied complete with internal wind bracing wires & connection accessories l PVC roof colour and side walls options l Integrated tower base / stage components available l PA wing options available on request l Full structural calculation report & build manual available Skymear Pitched Roof Systems are tower-based aluminum structures,which has superior performance,durability and tongue connection. All our trusses are manufactured in different sizes, length and shapes from high-grade and lightweight aluminum, and are all according to European standard EN13814 and welding EN1090 and certificated by CE,TUV and SGS certifications.
Thermoforming Packaging Machine Automatic Vacuum Packaging Machine MODEL NO.: RC420/520 SPECIFICATION: Applications Applicable for vacuum, gas and skin-packing with various food, meat, sea food, fruit, vegetable, medical and hardware items. Main Features and Characteristics 1. OMRON PLC, touch screen & servo motor are used with reliable performance and ease of operation; 2. Modular moulds are applied that can be replaced easily and the machine can be used for multiple purposes; 3. Photoelectric follow-up: color cover film or optical film can be used for packaging, which can reduce the cost and upgrade the products; 4. With modular moulds, They can be replaced easily and can be used on several machines. The moulds have a cooling system; 5. Fitted with a scrap recycling system, good environment and health can be maintained; 6. The mould adopts aluminum alloy materials,have good corrosion resistance and wearing resistance after Hardening treatment; 7. With special holding chains, the packaging machine is applicable for extending and moulding of flexible film or rigid film of different thickness for special purpose packaging; 8. With advanced horizontal and longitudinal cutting systems, the machines replacement operation is more convenient; 9. There is a scrap and waste recycling system to help maintain environmental cleanness; 10. Main part of the machine is made of stainless steel, that greatly improves the corrosion resistance of the equipment; 11. The German Busch Pump is used on the machine, with high degree, steady quality and good durability. Machine Item Model ZG-420 ZG520 Width of top film (mm) 396mm 496mm Width of bottom film (mm) 422mm 522mm Package style Vacuum & Gas Flush 200-500mm Film Flexible/ Semi-rigid/ Rigid Flexible/ Semi-rigid/ Rigid speed 4-6T/M 4-6T/M Water cooling 0.15Mpa 0.15Mpa Total power 10kw 10kw Electric power 380V/50HZ 380V/50HZ Compress air requirement(to be supplied by user) 0.6Mpa 0.6Mpa Machine weight(kg) 2200kg 2450kg Machine overall dimensions 6000 1050 2050mm 6500 1150 2050mm Main Machine Structure Main Machine Body Stainless steel Mold Material Teflon coated aluminum Mold Size According to Customers request Chain REGINA Top Film Roller Air-shaft(Mechanical brake) Code Printer Auto type printer Cutting System Horizontal punching cutting Slitting Device Vertical wheel cutting Discharge Conveyor 1000mm length Scrap Recycling System Rolling rewinding type -
Coil Mesh Drapery Detail: Coil draperys woven wire fabric is bold, modern, and innovation. The fabric diffuses and enhances lighting without blocking views or ventilation and the durable metal-tone finishes do not fade or darken. Low maintenance, flexible, lightweight panels are easy to install and will adapt to most standard drapery hardware. Projects include muti-story wire mesh draperies for hotels, auditoriums, and casinos; curved dividers for visual merchandising; window treatments for private homes; safety screening for industrial settings; sculptural forms for urban gardens; decorative interior/exterior wall coverings for buildings and parking garages; aviary round weave screening for animal habitats, and see-through appealing barriers for commercial security. Accessories: Metal coil drapery can be installed on the ceilings with aluminum alloy track and pulley with chain, the track can be fixed on the ceiling wall or side-wall, the pulley can make the metal coil drapery move easily and the chain can control the pulley. Usually our woven metal coil drapery has 1.5 times or 2 times overlap , when the mesh is hung , it can be show into a wave shape and make the curtain beautiful. As to the track, we have two kind of tracks , one is straight type, the pulley only can be moved straight; the other is bent track, the track can be bent into any shape according to your building shape. Directions of the wire drapery Please pay attention the direction of the metal coil drapery, usually it is hung on the ceiling, so you just tell me the height and the width (show on below),then we can understand correctly and supply you the correct goods. Remark: Wire Diameter: Single wire diameter. Opening: Diameter of inner circle. Height( H): The direction of single vertical wire. Width(W): The direction of horizontal direction. 1. We can produce the metal coil drapery with all kinds of materials according to customers needs, such as: low carbon wire, aluminum alloy wire, stainless steel wire or copper wire. 2.The opening is available from 3 mm to 20 mm and the aluminum alloy wire can be available from 0.5mm to 3mm. Special wire diameter and opening can be produced according to customers needs. 3.Each kind of metal coil drapery can be coated various colors even the stainless steel wire, we have rich experience to coating color in the stainless steel wire.
$2900/MT CIF China Brand: BRF/JBS MOQ 05 FCL Only will work on Enquiries by LOI. Grade A Chicken Paws Origin: BRAZIL-SIF plants 103 PACKING: Packing carton contains poly bags in a freezer carton= Approx. 10-20kg/per carton Total 27 MT of frozen chicken per 40ft container stored at -18�°C INSPECTION: S.G.S Inspection ### Key Export Products - Frozen Poultry Products - Frozen Pork Products - Processed Meat Products - Frozen Meat ### Key Trade Services - Supply Chain Management - Logistics and Transportation - Quality Assurance - Market Intelligence - Risk Management - Sustainability Consulting - Technical Support
Paraffin wax, also called 'paraffin', is a white, tasteless, odourless, translucent waxy solid. Paraffin wax is a type of wax that is derived from petroleum. Here are some key facts about paraffin wax: 1. Composition: Paraffin wax is primarily composed of long-chain hydrocarbons, specifically alkanes. These hydrocarbons are saturated, meaning they contain only single bonds between carbon atoms. 2. Physical Properties: Paraffin wax has a relatively low melting point, typically between 46°C to 68°C (115°F to 154°F), making it easy to melt and work with. It solidifies at room temperature.
Introducing in your gallery, a different concept of artistic expression, unique paintings using woods of different characteristics and irregular shapes with colors and rustic finishes. Woods such as walnut, teak, ash, oak, parota, pine, generate a mixture of natural colors of great beauty, others using carpentry and joinery techniques with a rustic finish. If you consider that we can be part of your catalog, we have 30 at your disposal immediately and if you need to introduce this type of art in volume for clients such as resorts or distribution chains, wehave the capacity for high volume.
Place of Origin: Ho Chi Minh City, Vietnam Brand Name: Eco Wipes Model Number: FN10 Age Group: Adults Use: SKIN CARE Certificate: GMPC MSDS ISO9001 Sample: Freely Ecowipes Vietnam Corporation Is established in 2010, We are eading manufacturer and exporter of wet wipes for babies and adults, antibacterial wipes and other cosmetic wet wipes. Our products have been exported to various countries, including the US, UK, Middle East and Southeast Asia. With advantage of over 14 years of experience in manufacturing and processing wet wipes, modern production line, professional team and complete supply chain Infor contact:
4-Light Pot Hanging Rack Chandelier Size: Chandelier: 9.8 inches high, 11.8 inches wide and 34.6 inches long. Chain: 39 inches high(max). Canopy: 4.7 inches wide and 11.8 inches long. Total hanging weight for all hooks is 30 lbs at max. Easy Installation: Assembly required and easy to install, with all mounting hardware and a detailed mounting instruction included. Color: Black. The metal pot rack chandelier with black finish gives your kitchen island and dining room a country feel and adds much light for industrial , cottage, or farmhouse homes. It comes with 8 hooks for hanging pots and pans.