Fiberglass adhesive mesh is made from c-glass or e-glass woven fabric then coated by acrylic acid copolymer liquid and adhesive glue.It is widely used for exterior insulation finishing systems(eifs), waterproof roofing and stone reinforcement. It has following advantages: 1. Water resistance, flexibility, softness. 2. Resistance to aging and attack from breakdown. 3. Resist cracking, does not rot or bubbles, and also alkali resistance. z
It is well used for shooring display shells (Fireworks)
Insulating profile is made of ECR glass reinforced epoxy resin.We use continuous pultrusion procss .The products fullfill The standard of IEC61109.Insulator core rods also are also called fiberglass rod,FRP rod,GRP rod,fiberglass bar,Insulation rod,fiberglass stick and so on. 1. Standard: IEC61109 2. Material: E glass and epoxy resin. 3. Process: Continuous pultrusion. Process: 1 - Continuous roll of reinforced fibers/woven fiber mat 2 - Tension roller 3 - Resin Impregnator 4 - Resin soaked fiber 5 - Die and heat source 6 - Pull mechanism 7 - Finished hardened fiber reinforced polymer Specifications: 1.Color: light green or brown. 2.Length: according to Customer requirement. 3. We offer customized products,including the new size, New surface treatment, Jointing the fitting, screw or mechanical.
There are many types and specifications of fiberglass net. Generally the mass from 60 g/sq m up to 500 g/sq m; and the meshes from 20 x 20 to 1 x 1; As to the weave, it might be leno or plain. Application (1), In construction industry for wall finishing reinforcement. There are different specification adopted, such as 70-5x5, 80-5x5, 100-5x5, 130-5x5, 150-5x5, etc.. (2), In construction industry for reinforcing water proofing products, such as water proofing membrane, water proofing roof. (3), In construction industry for reinforcing cement floor. (4), In stone industry for reinforcing marble slabs, etc.. There are many different specification, which might be made according to customers demand. (5), In stone industry for reinforcing mosaic. The specification and structure might be made at special demand for being suitable. (6), In grinding wheel industry for reinforcing grinding wheel, cutting wheel, dish wheel, etc.. There are many different specification and different types made according to order. (7), In many other fields as reinforcement for lots of application. The main models of fiberglass net are as follows: 70-20x10 70-6x5 80- 6x5 100 - 5x5 130- 5x5 145- 5x5 160 - 5x5 As to the width and roll length, it might be according to order.
Fiberglass drywall joint tape is usually used for Construction and declaration application as joints for decoration or repairing wall crack, etc. Usual Spec: 70g-9x9 50mmx20m 70g-9x9 50mmx45m 70g-9x9 50mmx90m Also can offer 60g-9x9, 150m roll etc.
Place of Origin: Hebei, China (Mainland) Brand Name: Xinghai Model Number :leno or plain Application: Wall Materials Weight : 60g-300g/sqm Width :1m Mesh Size: 4*4/5*5/6*6/7*7 Weave Type: Plain Woven Yarn Type : C-Glass Alkali Content Alkali Free Standing Temperature : 1300degree Color : all available Trade type : factory Certificate : ISO9001:2000. Plastic film, carton or pallet.
Glass fiber plaster mesh for concrete blocks ,;is made from the medium-alkali,; fiberglass mesh greige,on which the alkali resistant material is coated.The product comes with high strength,excellent cohesive property,and good agglutination capacity and fixation performance.It is widely applied in wall reinforce,external wall heat preservation and roofing water release .It is also,;applied in reinforcing cement,pitch,marble and mosaic construction.The,;fiberglass mesh is an ideal engineering material in building industry. Glass fiber plaster mesh for concrete blocks ,;is made from the medium-alkali,; fiberglass mesh greige,on which the alkali resistant material is coated.The product comes with high strength,excellent cohesive property,and good agglutination capacity and fixation performance.It is widely applied in wall reinforce,external wall heat preservation and roofing water release .It is also,;applied in reinforcing cement,pitch,marble and mosaic construction.The,;fiberglass mesh is an ideal engineering material in building industry.
Adhesive mesh joint tape with corrosion resistance Itis made formwoven fiberglass mesh and is treated with adhesive glue.That is thin, lightweight, extremely strong and very easy to apply. The tape greatly increases joint strength and durability to reduce cracking. Adhesive mesh joint tape with corrosion resistance Itis made formwoven fiberglass mesh and is treated with adhesive glue.That is thin, lightweight, extremely strong and very easy to apply. The tape greatly increases joint strength and durability to reduce cracking.
The Fiberglass Plain Weave Fabric is a fabric woven in plain method with E-glass or C-glass roving.It is also named "E-glass or C-glass Roving Cloth."The fabric could beeasily impregnated with resin and it comes out with high adhesion strength;additionally this fabric is with high performance in chemical-corrosion resistance,fire resistance,heat resistance, and durability.So as it is widely used in GFRP(Glass Fiber Reinforced Plastics) industry and other chemical-corrosion,fire resistance and heat resistance material and projects.
Huahao frp round solid rods are widely used as pcb equipment drive shafts .Pcb equipment fiberglass rod has many advantages : good corrosion resistance , lightweight and high strength , heat insulation and non-poisonous , smooth and good looking surface, small friction resistance high transport capacity , easy installation , long service life . This product is suitable for pcb equipment and cleaning equipment. Colors: our regular colors include black , gray , red , orange , yellow , white , green , and blue . And we can offer any color you request . Customized colors are accepted . Welcome to visit our website . Dimension: 2mm to 100mm .
Silicone fiberglass sleeving is an insulating sleeving produced with a thermal process. It is woven as sleeving by non-alkali fiberglass and coated with a silicone resin/rubber. The thermal treatment and the special resins/rubbers used for this item give the material a very good softness and elasticity, excellent high temperature resistance and good dielectric strength. And widely used in wiring insulation and mechanical protection for electric motors, transformers and electrical instruments. 1. Type: wsg-1, wsg-2, wsg-3, wsg-4, wsg-5 2. Operating temperature: -10~+260¡ãc 3. Rated voltage: 1500v~ 10000v 4. Flame retardant: ul vw-1 5. Roll package: 100, 200 meters per roll 6. Packing: roll or cutting length as per customer's need 7. Standard color: white, other colors are available at requesting 8 cetificate: ul1441 9. Application: Motor and transformers Household electrical appliances Tv set and electric instrument Heating equipment The special lamps and lanterns Packing: roll or cutting length as per customer's need
D16-24mm length 1200-2600mm Rod ultimate load 80-160kn Pallet size:120x120x6 120x120x10 150x150x8 150x150x10 150x150x10
We, rell composite , specializing in grp molded gratings, grp pultruded gratings, grp pole, square tube, round tube, i beam, wide flange beam, equal angle, c channel, flat panel, solid panel, fiberglass board, flat tube, kick plate, y shaped angle, high strength deck panel, flat strip, grp round/square rod, stair nosing, stair tread, stair cover, handrail, ladder, drain cover, manhole cover, grp fittings, gratings clips, grp flanges, grp fittings, grp cable trays, frp/grp hand-lay-up custom products and so on.
Our range of ladders are : Series discription Fs 1000 self supported step ladder Fs 2000 self supported step ladder Fm 1000 self supported step trestle ladder Fm 2000 self supported step trestle ladder Fh 1000 wall supported self ladder Fp 1000 self supported platform ladder Fp 1100 self supported platform ladder with hand rail & castor Fp 2000 self supported trestle ladder with foldable platform Fe 2000 wall supported extension ladder Fe 3000 wall supported extension ladder Fe 8400 ladder for manhole application Fe 8000 industrial step stand Fpm 1000 mobile platform for maintenance ( single ) Fpm 1100 mobile patform for maintenance ( double ) Fm 4000 self supported step trestle ladder with extension ladder
Fiberglass roofing tissue is mainly used as excellent substrates for SBS and APP waterproofing membrane. The longitudinal strength and tear resistance be improved further by incorporating reinforcements into the tissue across its whole width. Main Features: 1, Fiber uniformly dispersed, flat is good 2, High tear strength 3, Dimensional stability, asphalt impregnated fast 4, Strong anti-embrittlement, aging, weathering 5, Excellent anti-leakage. 50g/m2.
Industries Served: Applied in various sports equipent. We offer custom-made parts. Functions and Characteristic 1. Light weight, high strength. The specific weight of FRP pultrusion fiberglass tube is 1.8-2.1g/cm, only 1/4 of steel. It is easy for transportation and installation. Compared with plastic, the strength is ten times of plastic products. 2. Corrosion-resistance, anti-aging and with a long service life. It can be used in different corrosive environment, such as acid, alkali, salt, some organic solvent and so on. In the areas of corrosion-resistance, it has the superiority that other metals can not compared with. Adding to the characteristics of good resistance to water and aging, its service life could be expected to more than 15 years. 3. Good security. FRP pultrusion fiberglass tube has excellent electrical insulation, non-magnetic, no spark and can also be add the process of flameproof according to user¡¯s needs. 4. Good resistance to impact and can be designed freely. Better resistance to impact and fatigue make carbon fiber composite products can be bended repeated without permanent deformation. Otherwise, it can be designed into different sections according to the customers¡¯ demand. 5. Colourful and Economics. FRP pultrusion fiberglass tubes have various specifications and the colors can be designed according to customer¡¯s requirements. In addition, the price is affordable and have a good future. 10000.
C-glass fiber yarn E-glass fiber yarn. Film & carton & pallet.
Fiberglass roving.
Our range of Fiberglass Tape is made of E-Glass yarn. 1) Good thermal resistance 2) Excellent insulating 3) Good corrosion resistance Applications: Fiberglass Tape can be widely used as wrapping and banding material for transformers, electric motors and cables. Specifications: Thickness(mm) Width(mm) Length per Roll(M) 0.1mm, 0.13mm, 0.15mm, 0.20mm etc 10mm, 15mm, 20mm,25mm,30mm etc 50M/100M Etc. It could be packed with cartons. 50M per rool, 100m per roll.
Functions and Characteristics 1.Its strength is up to 8-10 times and even exceeds that of ordinary steel. The high modulus elasticity is better than steel and have many good characters such as excellent creep resistance, fine corrosion-resistance and shock-proof. 2.Light weight. Its weight is only 1/5 of steel. 3.Good durability and fine corrosion-resistance. The products can be used in different corrosive environment, such as acid, alkali, salt, some organic solvent and so on. Industries served Aerospace, chemical equipment shaft, sports equipment, military equipment, textile machinery accessories, medical equipment fittings, environment protecting pipes, oil transmitting pipes, etc.
