METALS (Aluminium scrap, Copper Scrap, Copper Cathode, Stainless Steel, Used Rail, etc.), TEXTILES (Yarns, Cotton waste, Comber Noil, etc.), PLASTICS (Hdpe, Ldpe, PP, Granules, etc.), PAPERS (Wastepaper, corrugated boxes, etc.,), and all PETRO CHEMICALS (Methanol, Acetic Acid, MDC, Phenol, Toulene, MIX XYLENE, IPA, MIBK, etc.), PAINTS ADHESIVES ETC.
General surgery electric table with 4/5 functions.
â??Product Name: Pneumatic flange ball valve Valve Type: Ball valve Design Standard: GB,ANSI,DIN,JIS Working Pressure: 0~1.6Mpa Medium: water, gas, oil, acid, alkali Medium Temperature: -20�ºC~+180�ºC Port Size: DN15-DN200 Connection: flange Structure: floating full port Body Material: cast steel, stainless steel Seat Material: PTFE Application: water system, waster water system, oil& gas industry Driving Way: Pneumatic actuated Actuator Material: Aluminium Alloy Actuator Model: AT52D-AT115D Action: double-acting Rotary Angle: 90�° Air Pressure: 4~8bar Cylinder Size: 52-115 mm Output Torque : 20-344 NM Working Temperature: -20C~+80C Air Access: G1/4" Warranty: 12 months
Pneumatic valve is a valve driven by compressed air. When purchasing pneumatic valves, only the specification, type and working pressure are specified to meet the purchase requirements, which can be used to control the flow of air, water, steam, various corrosive media, mud, oil, liquid metal, radioactive media and other types of fluids. Sudhanafluid pneumatic valve series: butterfly valve The butterfly plate of the butterfly valve is installed in the diameter direction of the pipeline. In the cylindrical channel of the butterfly valve body, the disc-shaped butterfly plate rotates around the axis and the rotation angle is between 0 �° and 90 �°. When it rotates to 90 �°, the valve plate is fully open. The butterfly valve is simple in structure, small in size, light in weight and only composed of a few parts. It can be opened and closed quickly by rotating 90 �°, and the operation is simple. At the same time, the valve has good fluid control characteristics. When the butterfly valve is in the fully open position, the thickness of the butterfly plate is the resistance when the medium flows through the valve body, so the pressure drop generated by the valve is very small, so it has good flow control characteristics. The butterfly valve has two types of seal: elastic seal and metal seal. Elastic sealing valve, the sealing ring can be embedded on the valve body or attached to the periphery of the butterfly plate. Valves with metal seals generally have a longer service life than those with elastic seals, but it is difficult to achieve complete sealing. Metal seal can adapt to higher working temperature, while elastic seal has the defect of being limited by temperature. If the butterfly valve is required to be used as flow control, the main thing is to select the correct size and type of valve. The structural principle of butterfly valve is particularly suitable for making large-diameter valves. Butterfly valves are not only widely used in oil, gas, chemical, water treatment and other general industries, but also used in cooling water systems of thermal power plants. The commonly used butterfly valves include wafer butterfly valve and flange butterfly valve. Wafer butterfly valve is to connect the valve between two pipe flanges with stud bolts. Flange butterfly valve is to connect the flanges on both ends of the valve to the pipe flange with bolts.
Single-acting/double-acting pneumatic actuator. Size standard: NAMUR standard, ISO5211 standard. Cylinder material: die-cast aluminum. It can be equipped with solenoid valve, limit switch and positioner. Air source pressure 2-8 bar. Applicable occasions: indoor or outdoor installation. Available valves: ball valves, butterfly valves, plug valves. Installation method: any position, 360-degree rotation.
Applicable fluid medium: water, air, oil, corrosive chemical liquid For example: piping systems for pure water and raw drinking water, drainage and sewage piping systems, salt water and sea water piping systems, Acid-base and chemical solution systems and other industries. Body material: UPVC Transmission mode: electric; 90 angular stroke rotary electric drive Actuator material: cast aluminum alloy/plastic shell Protection device: overheating protection Action time: 4-30 seconds Nominal pressure: 1.0Mpa Nominal diameter: DN15-200 Protection level: IP65 Fluid temperature: -15�°C - 60�°C (no freezing) Ambient temperature: -25�ºC-55�ºC Power consumption: 8VA-30VA Installation method: installation at any angle (horizontal installation is best for prolonging life) Power supply voltage: standard AC220V, optional DC24V, AC110V Voltage tolerance: ±10%, DC tolerance ±1% Connection method: internal thread, bonding (welding), flange, double union
Pneumatic Sanitary Ball Valve Overview: Pneumatic sanitary ball valve (quick-installation ball valve) is a sanitary valve that meets high-standard manufacturing standards. It is usually connected to the pipeline by a card box and quick-installation method. It can be more convenient for dry disassembly, maintenance and cleaning. Pneumatic sanitary ball valves are made of SUS304 and 318L stainless steel materials. The inner and outer surfaces have been polished and sterilized, and have undergone precise inspection procedures and strict quality management. They can meet the needs of wine, food, biopharmaceutical and other industries. special requirements. The pneumatic sanitary ball valve adopts the all-inclusive F4 seal, which is easy to clean without any dead ends, and has no individual accumulation area. It is completely clean and meets the standards of food hygiene. Pneumatic Sanitary Ball Valve Features: 1. The pore size of the pneumatic quick-loading ball valve is consistent with that of the pipeline, and the surface is smooth without dead ends, and no sediment will be generated; 2. The inner wall of the flow channel is polished and sterilized to fully meet the sanitary standard; 3. Pneumatic sanitary ball valve adopts all-inclusive fluorine-lined (PTFE) sealing form, there is no dead angle and easy to clean: 4. Pneumatic quick-loading ball valves are all made of stainless steel, and the inner wall of the flow channel is 0.5um electronically polished to keep the fluid unimpeded. Application of Pneumatic Sanitary Ball Valve: Pneumatic sanitary ball valves are equipped with solenoid valves, travel switches and other related accessories, which can be used for remote automatic control, and can also be equipped with valve positioners to input 4-20mA signals according to the needs of working conditions, so as to adjust the quality of the pipeline, and the pneumatic hygiene The inner wall of the ball valve is long and smooth, no dead angle, seamless, automatic exhaust and other channels, and it is also very suitable for the needs of cleaning in place. It is widely used in food, sour wine, beverages, dairy products, fine chemical pharmaceuticals and biological engineering, etc. Many industries.
Overview of pneumatic regulating ball valve: According to the structural form, the pneumatic regulating ball valve can be divided into pneumatic O-type regulating ball valve or dynamic V-type regulating ball valve. It is mainly used with the valve positioner to make a press signal according to the input and output 4.20mA, so that Control the rotation opening of the ball valve valve. To achieve the proportional adjustment of pipeline medium pressure, flow rate, liquid door and other parameters, among them, the pneumatic/type adjustment glass closure has knotted and removed shape objects (throwing gaps, which can adjust the flow rate according to the change of the opening area in the middle of the field, and can cut off the fluid Closed by impurities contained in the medium, suitable for the control of pulp, mortar, viscous fluid, Pneumatic regulating ball valve principle: The pneumatic regulating ball valve uses compressed air as the driving force to drive the ball flower to rotate back and forth, so as to achieve the opening and closing of the valve. Size, to achieve different degrees of proportional adjustment to the medium flow. When the pneumatic actuator receives the signal from the control system, it generates a corresponding thrust according to the size of the control force, and pushes the adjustment mechanism to drive the valve core to move, and completes the flow and pressure adjustment of the medium in the pipeline. It has a large rated flow coefficient. , good sealing effect, adjustable performance, etc.
Brief introduction of pneumatic three-way ball valve: Pneumatic three-way ball valve is used for medium reversing, confluence and diversion in pipelines. It is mainly composed of T-type or L-type three-way ball valves connected with pneumatic actuators. According to different connection methods, it can be divided into flanges and internal threads. Pneumatic three-way. type ball valve is to switch or store the flow direction of two mutually perpendicular channels, and achieve the distribution function, while the T-type ball valve can not only switch the flow direction of the material, but also make the three channels Interconnect or close any one of the channels to play the role of diversion and confluence. According to the needs of T conditions, a valve positioner and other related accessories can be installed on the pneumatic one-pass valve liner to control the operation of the ball valve core. Achieve automatic control of the medium in the pipeline. Advantages of pneumatic three-way ball valve: 1. Different connection forms can be selected, which are divided into pneumatic flange three-way ball valve and pneumatic thread three-way ball valve to meet different working conditions. 2. Sealing effect, the elastic deformation of soft seal tetrafluoroethylene can achieve leak-free sealing. 3. One valve with multiple functions: it can be made into an L-shaped port or a T-shaped port to achieve functions such as distribution, confluence, and diversion. 4. The pneumatic three-way ball valve is easy to install, and any port can be used as the flow inlet of the medium, and there is no leakage 5. It is widely used in environmental protection, oil products, metallurgy, steam, energy, papermaking, food and other pipeline systems to change the flow direction of the medium or achieve the separation or mixing of the medium. Pneumatic three-way ball valve standard specification: 1.Design and manufacture: GB/T12237-1989; API608. 2.Inspection and test: GB/T13927-1992; API598. 3.Flange connection: JB/T79]-2-1994; ASME/ANSIB165. 4. Structure length: JD-2002 Response device: also called limit switch, remote feedback switch signal (explosion-proof) Solenoid valve: choose two-position five-way for double action, two-position three-way for single action (explosion-proof) Triple piece: It can stabilize the air source, filter, and add lubricating oil to the cylinder Valve positioner: Input 4~20mA signal to realize valve adjustment function YT-1000R
Introduction It has the ability of powder drying, grinding, dispersion, de-agglomeration, chemical modification and classifying; Inlet air temperature : 450; Typical Feed Materials of VSFCM Cell Mill Minerals: Natural graphite ,Kaolin (natural and calcined) ,Limestone,marble,calcite,Magnesium hydroxide, PCC and GCC, Phosphates,Precipitated silica, Talc, Titanium dioxide Chemicals: Anode and cathode, materials of Battery, Graphite electrode, Iron oxides, Petroleum coke, Methyl cellulose, Pigments, Silica gels, Stearates, Zeolites Foodstuffs: Animal proteins, Casein, Cocoa, Peas, Potato protein, Sugar, Wheat flours, Wheat gluten ,Wheat starch
FOR SELL: Aluminum Ingots--Minimum 500MT to Maximum 20,000MT CIF HMS 1& 2-- Minimum 5,000MT to Maximum 100,000MT CIF COPPER CATHODES--Minimum 500MT to Maximum 25,000MT CIF COPPER WIRE SCRAPS Millberry--Minimum 500MT to 50,000MT CIF ALUMINUM SCRAP--Minimum 5,000MT to Maximum 200,000MT CIF COPPER WIRE SCRAP--Minimum 500MT to Maximum 20,000MT CIF USED WASTE AUTO CAR, TRUCK BATTERY LEAD SCRAP--Mini-5,000 to Maxi 200,000MT CIF USED BEVERAGE CAN UBC--Minimum 5,000 to 200,000MT CIF SCRAP DRILL PIPE--Minimum 5,000MT to 20,000MT CIF
guangzhou hertay co.,ltd Specializing manufacturing industrial-grade electric hammer, chainsaw, slotting machine, cutting machine, multifunctional electric drill. Pruning machine, lithium impact drill, electric drill, electric pick, angle grinder, electric circular saw, planer, marble machine, electric welding machine, aluminum sawing machine.
Guangzhou Hetay Equipment Co., Ltd. produces electric grinder, which is an electric tool for sanding with grinding wheel or grinding disc. The real charm of die electric grinding is that it can cooperate with multi-purpose abrasive tools to cut, trim, shape, grind and polish metal and non-metal materials. Its main abrasives are: whatsapp +8615915700551,skype:+8613535526245 (1) Cutting category: resin high-speed cutting sand sheet, cutting sand sheet with cloth net, emery cutting sheet. (2) Grinding: various special-shaped ceramic grinding heads, sand rings, sand drums, and page wheels with handles. (3) Polishing category: wool felt wheel, felt sheet, cloth wheel, wire brush, copper wire brush (polishing paste for various purposes). 2. Sanding machine It is mainly used for grinding narrow, complex and difficult-to-enter grinding parts, and is widely used in grinding die-casting products of bicycles, aluminum alloys and zinc alloys. Advantages: large cutting capacity, fast speed, convenient operation, small and difficult to grind the surface, which can be solved perfectly, and the operation is easy to be suitable for grinding at small angles and dead corners.
Product Description Thanks for you interested in HUANGGONG MACHINERY GROUP'S pumps, follow is brief introduction of this product, welcome to contact us for any other technical information or latest price. China Huanggong Machinery Group Co., Ltd. ---------Specialist in marine pump industry for over 40 years. ----------We are China first designer and manufacturer of Hydraulic submerged cargo pump system A. Using range Use as cargo pump for Product Oil tanker, chemical tanker, FPSO etc. B. Features Hydraulic deep well cargo pump system consists of hydraulic power unit, deep well pump, ballast pump, portable pump and control system components. The hydraulic power unit, installed in engine room, provides hydraulic power to all pumps on board and has system overload protection. All kinds of pumps of the hydraulic deep well cargo system operation site without electrical equipment, will definitely not generate static electricity and sparks, therefore, it's absolutely safe and reliable while transporting flammable and explosive chemical media. C. General Hydraulic Deep Well Cargo Pump System YQB consists of Hydraulic Station, Deep Well pump and Control Device. Hydraulic Station, installed in engine room, provides hydraulic power to all of the cargo pumps in vessel. Deep Well Pump(one pump per tank), built on deck, is submerged to the bottom of the cargo tank and is driven by hydraulic motor. Control Device, installed in the Console room, controls the output flow of Deep Well Cargo Pump and monitors the running of the system. The capacity of the pump can be controlled not only by Remote Control in Console room but also by manual Control on the deck. The system is produced in accordance with RULES FOR THE CONSTRUCTION AND EQUIPMENT OF SHIPS CARRYING DANGEROUS CHEMICALS IN BULK China's Standard of Ship design. D. Features Huang Gong's hydraulic deep well pump has been widely used in over 200 oil and chemical tankers which is considered as the leading manufactuer of hydraulic deep well cargo pump in China domestic. E. Class Society certificate CCS type approval. Production certificate: CCS, RMRS, ABS, BV, RINA etc.
After-sales Service: 1 Year Warranty: 1 Year Screw Number: Double Screw Pump Screw Suction Method: Double Suction Pump Shaft Position: Horizontal Performance: No Leak
Rated load(kg) 450 Rated bucket capacity(m) 0.3 Rated Power (hp) 25.2 Engine Model Kubota D1105 Diesel Engine Dumping Height(mm) 1287 Weight(kg) 1069 Overall dimensions 2619x1250x1358
Off-road forklift is an engineering vehicle that can carry out loading, unloading, stacking and handling operations on slopes and uneven grounds. It is mainly used for urban construction sites, dock yards, construction mines, economic development, stone yards. , small and medium-sized civil engineering, mountain forest areas and other field projects, such as poor distribution of material conditions in the distribution of goods, it has good mobility, cross-country reliability. model 3.0t front hinge Maximum payload kg 3500 Fork m 1.22 Customizable length Lifting Height m 3 3-6 Customizable Gear position automatic Dual high and low speed with running gear Transmission case kinlit 280 Integrated torque converter Engine kw yunnei490/36.8 Optional Entire length mm 4100/3850 Full width mm 1810 Full height mm 2450/2180 Total weight kg 4280 wheelbase mm 2350 minimum turning radius mm 4500 outside Tire size(front) 20.5/70-16wire Tire size(rear) 20.5/70-16wire Axle Weighted cast steel small wheel reduction axle Brake braking Air brake Four wheel disc brake Maximum working speed km/h 34 Maximum gradeability 35
The new true h12 small HT12 Weight kg 950 Max. digging depth mm 1800 Overall length mm 2300 Max. digging height mm 2880 Overall width mm 960 Max. dumping height mm 1950 Overall height mm 2250 Max. digging radius mm 3050 Crawler belt length mm 1230 æ??å°?å??转å??å¾? Min. rotation radius mm 1450 Chassis width mm 930 Max. digging distance mm 2300 Standard bucket capacity m�³ 0.025 Push blade lifting height mm 180 Standard bucket width mm 370 Push blade fallinig depth mm 200 Engine Type KEPU KD292F/YOUPU KD2V80 Engine parameter 14kw-3000rpm/12kw-3000rpm Working pressure Mpa 16 Main pump ml/r 6 Gradeability 30 Max. digging force KN 10 Operation mode Mechanical operation
Rated lifting load kg 3000 Load center distance mm 500 -Free lifting height mm 160 Overall length (With fork/without fork)mm 3752/2682 Width mm 1225 Overhead guard height mm 2090 Wheelbase mm 1700 Minimum ground clearance mm 135 Mast tilt angle (front/rear) % 6/12 Tire No.(before) 28x9 -15-14PR Tire No.(after)6.5-10-10PR Minimum turning radius(outer side) mm2400 Minimum right angle aisle width mm 4260 Fork size mm 1070x125x45 Maximum working speed km/h 18/19 Maximum lifting speed (Full/No) mm/s 440/480 Maximum gradeability (Full/No)% 15/20 Forklift weight kg 4250 Engine model
At Guangzhou Pering Suitcases And Bags Products Co., Ltd., we are committed to exceeding our clients' expectations through innovative solutions, unparalleled customer service, and a relentless pursuit of excellence. Whether you're a multinational corporation or a budding startup, we're here to partner with you in achieving your business goals through our premium food delivery packaging solutions. Get in Touch: Experience the difference of customized food delivery packaging solutions with Guangzhou Pering Suitcases And Bags Products Co., Ltd. Contact us today to discuss your requirements and discover how we can elevate your brand presence in the competitive food delivery market. Feel free to customize and refine the content according to your company's unique offerings and brand voice!
