Engine Type 24-valve, DOHC, 60 deg. V6 Displacement [cm3] 4169 Bore x Stroke [mm] 96.0 x 96.0 Max. Prop Shaft Output [kW (ps)] @r/min 220.6 (300)/5500 Fuel Induction System Fuel Injection Engine Transom Height[mm (inch)] X: 640 (25.2), U: 767 (30.2), E: 894 (35.2) Dry Weight [kg] * 288-299 Starting System Electric Starter Controls Digital Electronic Control (DEC) Tilt System Power Trim & Tilt Lubrication System Wet Sump Digital Network Available
Engine Type 24-valve, DOHC, V6 Displacement [cm3] 4169 Bore x Stroke [mm] 96.0 x 96.0 Max. Prop Shaft Output [kW (ps)] @r/min 183.8 (250)/5500 Fuel Induction System Fuel Injection Engine Transom Height[mm (inch)] X: 643 (25.3), U: 770 (30.3), E: 897 (35.3) Dry Weight [kg] * 263-273 Starting System Electric Starter Controls Digital Electronic Control (DEC) Tilt System Power Trim & Tilt Lubrication System Wet Sump Digital Network Available
Engine Type 16Valve DOHC Inline 4 Displacement cm3 1832 Bore x Stroke mm 810 x 889 Max Prop Shaft Output kW ps rmin 846 115 5800 Fuel Induction System Fuel Injection Engine Transom Heightmm inch L 516 203 X 643 253 depending on model Dry Weight kg 175185 Starting System Electric Starter Controls Remote Control or Tiller Handle depending on model Tilt System Power Trim Tilt Lubrication System Wet Sump Digital Network Available
Engine Type In-line 3 Displacement [cm3] 1140 Bore x Stroke [mm] 82.0 x 72.0 Max. Prop Shaft Output [kW (ps)] @r/min 62.5 (85) @5000 Fuel Induction System Carburetor Engine Transom Height[mm (inch)] L: 521 (20.5), Y: 572 (22.5), X: 647 (25.5) Dry Weight [kg] * 113-124 Starting System Electric Starter Controls Remote Control or Tiller Handle Tilt System Power Trim & Tilt or Hydro Tilt Lubrication System Pre-mixed Fuel and Oil
Pipe Inspection Cralwers Technical Feature: * 1. IP68 Waterproof ,anti-corrosion,can be used in different place. * 2. Forward ,backward,turn freely and adjustable speed. * 3. With ambient light and adjustable illumination. * 4.360 degree rotate, 220 degree flip * 5. Electrical Barrow, automotical and manual operation reel * 6. DIP, Meter counter, Pressure data are shown on the monitor * 7. Video can be storage and replay on the control box . * 8. 512 HZ is customized . * 9.Inspection Report is customized. *10.Laser optional. *11. GT102 sewer robot suitable for 100-600 Pipeline *12. Front and rear cameras with adjustable lights *13. Length: 80m-customized
MODEL HL-6000A OUTER DIMENSIONS W400mm D400mm H700mm WEIGHT 85kg POWER SUPPLY AC110V or AC220V(Single phase)50Hz/60Hz POWER CONSUMPTION 2.2KW Crimping press 6T Stroke distance 30mm  Wire TYPE AVSS,VSF, IV, KV, UL,Teflon , Glass Wire, etc Terminal type Terminal in roll or terminal in loose  Crimping applicator Side feeding or back feeding Applicator replacement Short time of change-over Crimper MATERIAL HSS Drive mode electrical Operating way By pedal HS code 8479899990
This product is suitable for industries such as metallurgy, coal, petroleum, landfill leachate treatment, and marine aquaculture. The minimum order quantity is 1 unit, payment method is TT, and shipping terms are FOB Our company produces products such as Self cleaning mesh filters, rotary brush filters, hydraulic drive self cleaning filters, hydraulic self cleaning filters, Screen filters, suction self cleaning filters, electric brush filters, automatic brush filters, vertical self cleaning filters, horizontal self cleaning filters, self cleaning medium filters, etc. We can also customize according to your needs.
MODEL HL-6000A OUTER DIMENSIONS W400mm D400mm H700mm WEIGHT 85kg POWER SUPPLY AC110V or AC220V(Single phase)50Hz/60Hz POWER CONSUMPTION 2.2KW Crimping press 6T Stroke distance 30mm  Wire TYPE AVSS,VSF, IV, KV, UL,Teflon , Glass Wire, etc Terminal type Terminal in roll or terminal in loose  Crimping applicator Side feeding or back feeding Applicator replacement Short time of change-over Crimper MATERIAL HSS Drive mode electrical Operating way By pedal HS code 8479899990
Planetary winch gearboxes of the HFW series are composed of 16 finely spaced frame sizes. The compact design allows the gearbox to be integrated into the winch drum. The failsafe brake can be integrated inside the gearbox or mounted externally, with common lubrication for the gears. Electrically driven versions are available with both in-line and right-angle configurations. Torque ratings are organized by FEM class, in accordance with minimum approved class safety factors for gears. Key features Class approval program ATEX conformity on demand Torque ratings are organized by FEM class The failsafe brake can be integrated inside the gearbox or mounted externally, with common lubrication for the gears Specifications Torque range 3.000 ... 275.000 Nm
Everflon® ETFE is a melt-processable copolymer of tetrafluoroethylene and ethylene. Everflon�® ETFE possesses a unique combination of desirable properties such as higher resistance to heat and chemical attack and outstanding physical toughness. It is processable by conventional extrusion, injection molding, rotomolding, rotolining, and electrostatic coating. It is available in a variety of forms including designated and powder. Application Wire and cable insulation, electrical components, coil forms, receptical sockets, connector insulators, extruded tubing, valves, fasteners, molded shapes and other end use components requiring a high performance fluoroplastic material.
OUTER DIMENSIONS W400mm D400mm H700mm WEIGHT 85kg POWER SUPPLY AC110V or AC220V(Single phase)50Hz/60Hz POWER CONSUMPTION 2.2KW Crimping press 6T Stroke distance 30mm � Wire TYPE AVSS,VSF, IV, KV, UL,Teflon , Glass Wire, etc Terminal type Terminal in roll or terminal in loose � Crimping applicator Side feeding or back feeding Applicator replacement Short time of change-over Crimper MATERIAL HSS Drive mode electrical Operating way By pedal HS code 8479899990
Ferro silicon is a ferro silicon alloy made from coke, steel scraps, and quartz (or silica) smelted in an electric furnace. Used as a deoxidizer and alloying agent in the steelmaking industry. Used as an inoculant and spheroidizing agent in the cast iron industry. Adding a certain amount of ferro silicon in the iron casting process can prevent the formation of carbides in the iron and promote the precipitation and spheroidization of graphite. Ferro silicon75( Fesi75) is the main raw material for the production of magnesium, and the consumption per ton is about 1.1 tons. The ground or atomized ferrosilicon powder can be used as a suspended phase in the beneficiation industry, and can be used as a coating for welding rods in the welding rod manufacturing industry.
We are specialized in raw materials of electric cable , optical cable and data cable. Also we are the one of the suppliers of Prysmian. we provide: 1)Insulation tape: mica tape, LSZH tape, PP/water blocking tape, mylar tape/PET , Semi-conductive water blocking tape,etc. 2)Metal Tape: copper tape, plastic coated steel / aluminum tape ,copper / aluminum foil mylar tape, etc. 3)Medium and high voltage cable material: XLPE , semi-conductive nylon shielding tape, Semi-conductive water blocking tape,copper tape, etc.
We are specialized in raw materials of electric cable , optical cable and data cable. Also we are the one of the suppliers of Prysmian. we provide: 1)Insulation tape: mica tape, LSZH tape, PP/water blocking tape, mylar tape/PET , Semi-conductive water blocking tape,etc. 2)Metal Tape: copper tape, plastic coated steel / aluminum tape ,copper / aluminum foil mylar tape, etc. 3)Medium and high voltage cable material: XLPE , semi-conductive nylon shielding tape, Semi-conductive water blocking tape,copper tape, etc.
We are specialized in raw materials of electric cable , optical cable and data cable. Also we are the one of the suppliers of Prysmian. we provide: 1)Insulation tape: mica tape, LSZH tape, PP/water blocking tape, mylar tape/PET , Semi-conductive water blocking tape,etc. 2)Metal Tape: copper tape, plastic coated steel / aluminum tape ,copper / aluminum foil mylar tape, etc. 3)Medium and high voltage cable material: XLPE , semi-conductive nylon shielding tape, Semi-conductive water blocking tape,copper tape, etc.
All type fishing game rod not only freshwater but also saltwater game. Light Jigging Rod, Jigging Rod, Slow Jigging Rod, Fast Jigging Rod, Micro Jigging Rod, Surf Rod, Electric Reel Rod, Boat Rod, Popping Rod, Light Popping Rod and so on. Fishing reel which included, Spinning Reel, Casting Reel, Overhead Reel and Underhead Reel. Extreme quality and Superb Designed of products and advertisement that can provided to you. Drop me an email to get our product lists!
Hongxi Automation Equipment Co., Ltd. Abbr. Hongxi Auto, is a professional factory in China, specialized in designing and producing many kinds of Automatic Assembly Machine for industrial production. it's Automatic Assembly Machines serve many productions fields includes electronic and electrical switches, screw and spring industries, medical, toy, stationary, automotive, etc. Hongxi Auto supplies Miniature Circuit Breaker Automatic Assembly and inspecting line MCB Automatic Assembly and inspecting Machine, Circuit Breaker Frame Fully Automatic Assembly Machine, Laser Marking Automatic Machine, Torsion Spring Automatic Assembly line, Automotive Camshaft Automatic Pressing and Inspecting Line,
Purpose: warping yarn on a crosna Model: KDW-T36 Product number: W-6027 Year of manufacture: November 1985 Width of the shafts: 1600mm Working width: 1500mm Crosna diameter: 670mm Number of bobbins on the gatter: 2 x 304 = 608 Count of threads: 608 Distances between the spindles of the gatter: horizontal size 250mm, vertical size 230mm Power consumption: 10kW, main motor â?? DC 7.5kW Gauges of the warping machine: length: 3.50m, width: 2.70m. Gauges of the gatte, when opened: length 11.50m, width 5.20m, height 2.3m. It is powered by electricity and air with a pressure of 5 Bar. The machine has documentation - incomplete. No spare parts.
Purpose: warping yarn on a crosna Model: KDW-T5 Product number: W-5005 Year of manufacture: August 1975 Width of the shafts: 1600mm Working width: 1500mm Crosna diameter: 670mm Number of bobbins on the gatter: 2 x 304 = 608 Count of threads: 608 Distances between the spindles of the gatter: horizontal size 250mm, vertical size 230mm Power consumption: 10kW, main motor â?? DC 7.5kW Gauges of the warping machine: length: 3.50m, width: 2.70m. Gauges of the gatte, when opened: length 11.50m, width 5.20m, height 2.3m It is powered by electricity and air with a pressure of 5 Bar. The machine has documentation - incomplete. No spare parts.
Features for the Brave BRPBC26HE Brushcutter Features Heavy-duty construction. Fully enclosed deck to minimize discharge. 26" cutting width. Two blades, sharpened on both sides and edge. Hydrostatic transaxle. Large pneumatic tires for tough terrain. Handle guards for operator safety. Specifications Engine: Honda GX390 Start: Electric with Recoil Backup Engine Displacement: 389 cc Drive: Hydrostatic (1 forward, 1 Reverse) Maximum Cut Width: 26" Cutting Capacity: Saplings up to 3" Diameter Spindle: 1" Spindle Bearings: Sealed, Industrial Grade Tires: 16/6.5 x 8 Pneumatic Bar lug