Anionic Polyacrylamide: It is the white powder. The APAM with the molecular weight of 4,000,000-26,000,000 has good water solubility, and it can be dissolved in water by arbitrary proportion but not in organic solvents. It has the characteristics of high-polymer electrolyte in the neutral and alkaline medium, and it is sensitive to the electrolyte salt. And it can be cross-linked into insoluble gel with the high valence metal ions. Use: (1) Industrial waste water treatment: For the neutral or alkaline waste water with pH value of 7-14, large suspended particles and ions of positive charge, it has the best treating effect, such as the waste water from iron industry, electroplating factory, metallurgical industry, coal washing, etc.. (2) Drinking water treatment: When the drinking water still does not meet the standard after the treatment of the precipitation and filtering, then the APAM can be used as the flocculant. Its dosage is 2%-5% of that of the inorganic flocculants, but the effect of former is dozens of times of that of latter. (3) It can be used for the recycling of the loss of brewers' grains in the alcohol plant and starch in the starch factory. (4) It can be used as the water block agent in the oil field, and also the oil-displacing agent during the tertiary recovery. (5) It can be applied in the paper-making industry. It can be used as the dispersant, retention aid, etc. in the long fiber paper-making, and also the flocculant for the waste water from the paper-making. Effective pH value:7-14 Package:25kg/pack
Molecular weight (í-1002) í¦500 í¦600 í¦700 í¦800 Solid content (%) í¦90 í¦90 í¦90 í¦90 Ionic degree (20%-80%) 20-45 45-55 55-60 65-80 Residual monomer (%) 0.05-0.1 0.05-0.1 0.05-0.1 0.05-0.1 Dissolution time(min) í_50 í_50 í_50 í_50 Intrinsic Viscosity (dl/g) í¦8 í¦8 í¦8 í¦8 Appearance White powder/granule. 25kg/pack
Cas no. 9003-05-8 Appearance: granular dry powder Charges: anionic, neutral 25kg per bag
Properties: This product is a copolymer made by the cationic monomer and acrylamide. Its small white particles or powder which is formed by granulation, drying and crushing. Usage: Widely used for sludge dewatering, treatment of wastewater and organic wastewater, water treatment plant agent, oil field chemicals (such as clay anti swelling agent, oil field acidification thickener, etc.) and paper additives. Packing: 25kg plastic woven bag lined with polyethylene liner or the packing made accordingly. Storage Conditions: Pay attention to heating, moisture. Dry powder products will absorb moisture and to become caking for a long time exposure. Stacking shall not exceed 20 layers. The effective storage period is 2 years.
Easyfloc Anionic Polyacrylamide, it is anionic flocculant, polymer, also said anionic polyelectrolyte, it is high-molecular polymer and has such properties as flocculability, thickening, shear, resistance diminishing, and dispersion. There are active genes in the molecules. After absorbing the surface, the substance can change the status of surface and will generate hydrogen bond after interaction and absorption with many substances. In the process of water treatment, it can bridge the absorbed particles and thus enable several and even dozens of particles to connect together and lead the cementation particles to conglomerate into large floccules, so that the sedimentation for the particles in the suspension liquid can be accelerated. The product is capable of speeding solution clarification and improving filtration and other effects. It is widely used for municipal and all kinds of industrial wastewater treatment, oil drilling, papermaking, textile, EOR and DRA(DRAG REDUCING AGENT), mineral processing, construction bored pile, soil stabilization, incense making, sludge thickening and dewatering, and others. As a professional Anionic Polyacrylamide supplier and manufacturer, Easyclean Chem has been supplying quality coagulants and flocculants to 30 countries close to 10 years.
Cationic Polyacrylamide (C-PAM) is a water soluble polymer and mainly used for various industrial wastewater flocculation sedimentation, precipitation and clarification treatment, such as iron and steel plant wastewater, electroplating wastewater, metallurgy wastewater, coal washing wastewater and sewage treatment and sludge dewatering etc. It can also be used for drinking water purification and clarification. Applications 1. Can be compatible and absorb with many substances to form the hydrogen bond because it has many active groups. 2. Can flocculate the colloid with the negative charge with the properties of removal of turbidity and decoloring, adsorption and adhesion. 3. Can be used in wastewater treatment in industries such as dyeing, papermaking, food processing, construction, metallurgy, oil processing, aquatic products processing and fermentation industry, particularly suitable for city sewage and sludge, papermaking. 4. Widely used for different sludge dewatering for belt filter, screw filter and centrifugal filters.
cationic polyacrylamide Product features cationic polyacrylamide is composited with positive ion monomer and acrylamide to form linear high molecular copolymer by copolymerization. Technical index cationic polyacrylamide index Model molecular weight ionic% solid content effective residual (million) % PH range monomer content% 9101 6-8 5-8 â?¥89 2-9 â?¤0.05 9102 6-8 10-15 â?¥89 2-9 â?¤0.05 9003 6-8 15-18 â?¥89 2-9 â?¤0.05 9004 6-8 20-25 â?¥89 2-9 â?¤0.05 9006 8-10 30-35 â?¥89 2-9 â?¤0.05 9008 10-12 40-45 â?¥89 2-9 â?¤0.05 9010 10-12 50-55 â?¥89 2-9 â?¤0.05 9012 10-12 60-65 â?¥89 2-9 â?¤0.05 Main uses Dewatering agents: low dosage, high dewatering efficiency Papermaking additive: reduce fiber and positive ion, improve paper strength Treatment of sewage and organic waste water Oilfield chemical additive
primarily as a flocculant: For the suspended particles, coarse, high concentrations of positively charged particles, water, PH value is neutral or alkaline water, since the anionic polyacrylamide molecular chain containing a certain amount of polar groups can adsorption of suspended solid particles, so that bridging between the particles to form large flocs. Therefore, it accelerates sedimentation of particles in suspension, has a very significant speed up a clear solution to promote filtering and other effects. The products are widely used in chemical industry waste water, waste water treatment, municipal sewage treatment. Water industry, high turbidity water purification, Shen Qing, coal washing, mineral processing, metallurgy, steel, zinc, aluminum industry, electronic industry and other water treatment;
Item anionic Model bya9236 Appearance white granule powder Solid content ( Molecular weight¡ê¡§million¡ê Degree of hydrolysis¡ê¡ Insoluble matter¡ê¡§ Solution time¡ê¡§min Residual monomer¡ê, Effictive ph value 5-14 25kg paper-plastic composite bag
Anionic polyacrylamide (apam) Introduction This product is a water- soluble high polymer.Its not soluble in most organic solvents. It has good flocculating activity, and can reduce the friction resistance between liquid. Specification Product:apam Solid content:min. 88% Ionicity:anionic Appearance:white fine-sand shaped powder Molecular weight:15million-20million Ion concentration:8%15%25%40% Shelf life:24 months Application 1.This product can be used to treat industrial wastewater and mining wastewater. 2.This product can also be used as additives of the mud materials in oil-field, geological drilling and well boring. Application method 1.It should be diluted to the concentration of 0.1%(based on solid content).It is better to use neutral or desalted water. 2.When making up solution, the product should be scattered evenly in the stirring water, usually the temperature is between 50-60. Package and storage Packed in 25kgs woven bag with polypropylene. This product is hygroscopic, so it is should be sealed and stored in a dry and cool place below 35.
Basic Info Environmental Protection: Yes Color: White Appearance: Solid Kind: Dispersant Producing Flow: Paper Processing Chemicals Origin: Wanquan, Zhangjiakou City, Hebei Province, China Product Description Appearance:White granular solid Package:25KG bag or per buyers' requirement
AppearanceWhite powder Solid Content Molecular Weight 25million Degree of lon% Low Medium high Dissolving time Chemicals PAM will be packaged in inner plastic bags, and further in plastic woven bags with each bag containing 25Kg, it according to your requirements packaging
Product Name: Nonionic Polyacrylamide Product Description: "This product is one of Sebchem Key products Some of our direct/ Indirect clients are ARAMCO, ADNOC, SCHLUMBERGER, BAKER HUGHES, CLARIANT, CHAMPION, GE, SUEZ, METITO, ECOLAB, MAPEI, SIKA, ARAMCO REFINERIES, SCOTT BADER, SYNTHOMER, IFFCO. Sebchem providing its chemicals to our global clients in the Oil & Gas Upstream Oil & Gas Downstream, Petrochemicals, Industrial, Water Treatment, Construction, Detergent, Coating & Resin, Agro, Textile, Food. We supply chemicals IBCs, Drums, ISO Tanks, Bags, and up to Bulk Vessels" Price of product ( USD price or FOB price): USD Product origin: Multiple Key Specifications/Special Features: "This is one of Key products of Sebchem given to Sebchem clinets across the World. Please contact our sales team or via our website for getting TDS, SDS, COA "
Product Name: Anionic Polyacrylamide Product Description: "This product is one of Sebchem Key products Some of our direct/ Indirect clients are ARAMCO, ADNOC, SCHLUMBERGER, BAKER HUGHES, CLARIANT, CHAMPION, GE, SUEZ, METITO, ECOLAB, MAPEI, SIKA, ARAMCO REFINERIES, SCOTT BADER, SYNTHOMER, IFFCO. Sebchem providing its chemicals to our global clients in the Oil & Gas Upstream Oil & Gas Downstream, Petrochemicals, Industrial, Water Treatment, Construction, Detergent, Coating & Resin, Agro, Textile, Food. We supply chemicals IBCs, Drums, ISO Tanks, Bags, and up to Bulk Vessels" Price of product ( USD price or FOB price): USD Product origin: Multiple Key Specifications/Special Features: "This is one of Key products of Sebchem given to Sebchem clinets across the World. Please contact our sales team or via our website for getting TDS, SDS, COA " Minimum Order Size and Packgaing details:
Product Name: Cationic Polyacrylamide Product Description: "This product is one of Sebchem Key products Some of our direct/ Indirect clients are ARAMCO, ADNOC, SCHLUMBERGER, BAKER HUGHES, CLARIANT, CHAMPION, GE, SUEZ, METITO, ECOLAB, MAPEI, SIKA, ARAMCO REFINERIES, SCOTT BADER, SYNTHOMER, IFFCO. Sebchem providing its chemicals to our global clients in the Oil & Gas Upstream Oil & Gas Downstream, Petrochemicals, Industrial, Water Treatment, Construction, Detergent, Coating & Resin, Agro, Textile, Food. We supply chemicals IBCs, Drums, ISO Tanks, Bags, and up to Bulk Vessels" Price of product ( USD price or FOB price): USD Product origin: Multiple Key Specifications/Special Features: "This is one of Key products of Sebchem given to Sebchem clinets across the World. Please contact our sales team or via our website for getting TDS, SDS, COA "
Technical index : Model Molecular weight (million) Degree of hydrolysis (%) Solubility (minutes) Solid content % Ph Residue Monomer (%) Appearance 136 3~6 20~30 -
Trade name: Anionic / flocculant / polyelectrolyte / pams / phpa Active ingredient: High molecular weight polymer Chemical name: Anionic polyacrylamide/polyelectrolyte/flocculant / Cas no.: 9003-05-8 Standard: Gb17514-2008 Brand: Certification: Iso, sgs Port of loading: Qingdao port, china Delivery time: Within 10 working days after got your payment Package: Packed in 25kgs kraft bag or white pe bag on pallet and 18-20ton/fcl, or 750kgs big bag Applications: Water treatment, paper making, sludge dewatering, textile, sugar and juice, drilling, oil & gas, mining . Sample: Free to test -
Pam characteristics Flocculation Pam has the ability to bridge together particles suspended in solution by an adsorption process. 25 kg paper plastic three-in-one compound woven bags, or according to users¡¯ requirement; its shelf life is 2 years.
Nonionic Polyacrylamide/NPAM with Best Cost Performance!!! Appearance: White Powder Solid Content: ≥ 88% Molecular Weight: 8-12 Degree of Hydrolysis: ≤ 6 Dissolving Time: ≤ 60min Applications: The washing of coal ore auxiliary in textile industry waste water treating agent. The mineral separation of metallurgy. Prevent sand and stabilize sand chemical grouting agent blocking agent in the oil field soil humectant. Use Scope: This product is widely used in petroleum well drilling, building, coating, textile shoemaking, food, paper making, ceramics, rubber, printing, environmental protection and chemical industry. Packing: 25kg paper-plastic composite bag, or following your demand. Sample free Price interview 25kg paper-plastic composite bag, or following your demand
partialy hydrolised polyacrylamide(PHPA), PAM, in power and emulsion form of medium to high molecular weight with different anionic charge range to suit user requirement. we also manufacture non ionic polyacrylamide. Our product ADDRILL EA, PA and PAB widely used in drilling operations.
