The Components Function: NO. Items Information 1.Pre-treatment Section 1.1 Sand Filter Remove turbidity,SS matter,organic matter,colloid ,etc. 1.2 Active carbon filter Remove color ,free chloride,organic matter,harmful matter,etc. 1.3 Water softener Soft water and reduce its hardness. 2.RO Part 2.1 High pressure pump Provide power for RO. 2.2 PP filter Prevent large particles ,iron ,dust,SS Matter,impurity into RO Membrane. 2.3 RO Membrane Removes :lead ,cooper,barium,chromium,mercury,sodium,fluoride,nitrite,nitrate,and selenium. 3.Electricity control System 3.1 PLC+Touch screen control system Improved from SIEMENS ,CMS 3.2 Electrivity components Schneider,Chint 3.3 Pipe and fitting Adopt domestic famous brands ,UPVC/Stainless Steel Material
Mesh Disc Filters Mesh disc filters are made of different kinds of metal alloy,such as stainless steel ,galvanized ,selected plain steel ,copper ,etc. with precise construction, uniform opening, excellent corrosion and rust resistance. Material: stainless steel 304,304L,316,316L,410,420,430;Galvanized ,Q195,Cu65/80 Diameter: 0.025mm-1.5mm Mesh: 2-400mesh Features: Acid-resistance,alkali-resistance,hot-resistance,heat-resistance,and wear-resistance.high-temperature resistance. Performance: High strength, no need of support. No possibility of media migration occurring. Pipe type stainless steel filter elements have wide operating temperature range. This type of filter elements are strongly corrosion resistant. Application: Used for screening and filtering in the acid or alkaline environment, and used as a mud mesh in petroleum industry, as a screen mesh in chemical industry, and as a pickling mesh in electroplating industry.
Mesh Disc Filters Mesh disc filters are made of different kinds of metal alloy,such as stainless steel ,galvanized ,selected plain steel ,copper ,etc. with precise construction, uniform opening, excellent corrosion and rust resistance. Material: stainless steel 304,304L,316,316L,410,420,430;Galvanized ,Q195,Cu65/80 Diameter: 0.025mm-1.5mm Mesh: 2-400mesh Features: Acid-resistance,alkali-resistance,hot-resistance,heat-resistance,and wear-resistance.high-temperature resistance. Performance: High strength, no need of support. No possibility of media migration occurring. Pipe type stainless steel filter elements have wide operating temperature range. This type of filter elements are strongly corrosion resistant. Application: Used for screening and filtering in the acid or alkaline environment, and used as a mud mesh in petroleum industry, as a screen mesh in chemical industry, and as a pickling mesh in electroplating industry.
SMC (Sheet Moulding Compound) water tanks are made of a composite material consisting of thermosetting resin, glass fibers, and mineral fillers. The material is molded into panels and then assembled to form a water tank of the desired size and shape. SMC water tanks are durable, lightweight, and resistant to corrosion, making them ideal for outdoor and indoor applications, such as residential, commercial, and industrial water storage. GRP (Glass Reinforced Plastic) water tanks are also made of composite material, but they use a different manufacturing process. GRP tanks are made of layers of fiberglass reinforced with resin and formed into a seamless, one-piece vessel. Like SMC tanks, GRP tanks are lightweight and durable, and they are also resistant to corrosion and UV radiation. They are commonly used for industrial applications, as well as for residential and commercial water storage. GRP Water Tank/SMC Water Tank/FRP Water Tank GRP module water tank is a new type water tank after the development of reinforced concrete water tank , steel plate water tank, stainless steel water tank.GRP water tank combined with the GRPmolding panel, sealing materials, metal structure and piping system to onsite assemble together. Cleanliness and saniation SMC Water Tanks satisfy relevant Food Sanitation standards. Since exterior light is completely blocked, bacteria generation and germ growths are prevented. In particular, when large panels are employed, existing water tank interior structures are eliminated, allowing long-term sanitary use of water tanks. Excellent durability The interior structural components of a water tank consist of Storage Tank System (STS) and Base Layer (STS PE coating and Winding Pipes) that prevent corrosion or rusting. The external components are Melt Zinc plated, thus having semi-permanent useful life. Complete water tightness Special sealants with international patents are used to guarantee water tightness.
GRP Water Tank/SMC Water Tank/FRP Water Tank GRP module water tank is a new type water tank after the development of reinforced concrete water tank , steel plate water tank, stainless steel water tank.GRP water tank combined with the GRPmolding panel, sealing materials, metal structure and piping system to onsite assemble together. Cleanliness and saniation SMC Water Tanks satisfy relevant Food Sanitation standards. Since exterior light is completely blocked, bacteria generation and germ growths are prevented. In particular, when large panels are employed, existing water tank interior structures are eliminated, allowing long-term sanitary use of water tanks. Excellent durability The interior structural components of a water tank consist of Storage Tank System (STS) and Base Layer (STS PE coating and Winding Pipes) that prevent corrosion or rusting. The external components are Melt Zinc plated, thus having semi-permanent useful life. Complete water tightness Special sealants with international patents are used to guarantee water tightness. Rational capacity design Various panel designs are used to design tanks of all capacities and dimensions. Convenient installation Standardized parts are used for on-site installation so that materials can be brought into restricted areas for convenient installation. Excellent thermal protection Single panels are used for water tanks installed underground, while the insulated panels, which are single panel with insulation material compressed together, provide excellent insulation on water tanks installed outdoors.
We are among the best Lanco Type threading die head manufacturers in India. Lanco Type Threading die head manufactured by us is passed through stringent heat treatment in our advanced imported treatment plant. This threading die head is available in an assortment of types with us such as Lanco type pipe threading die head, Lanco type bar threading die head, Lanco type bolt threading die head and Lanco type rebar threading die head, Lanco type rod threading die head, Lanco type pvc pipe threading die head and Lanco type bar threading die head. These threading die head are efficient enough to give high performance in longer use. We facilitate our clients by providing easy accessibility of these threading die head at most reasonable prices. G9-power HEAT Treated die head are of the revolving type for application to hand operated, semi accurate to hand operated, semi-automatic & automatic threading machines of rugged construction the Die heads provide accurate and trouble free operation over long production runs. Constructed of specially selected alloys steel, the G9-power Die Head are recommended for threading upto and including class 3 tolerances and are well known for their ability to cut coarse pitch threads in a single pass. They have wide range converge, permit rapid set up, gives trouble free operations.
Crankcase Precision cast oxidation treated surface ofthe crankcase. High and low pressure water seal components The high and low pressure water seal design of the "U" type "Nbr/Com/Buna N" material enhances the performance of the water pump and improves its service life. The plunger support guide ring ensures the coaxiality of the plunger, extending the service life of the water seal and plunger. Pump head assembly Selected stainless steel material, new andefficient structural design, high strength, no pores, long service life, andsafe operation. Reinforced 8-bolt fastening, 18mm, grade 12.9. Pommel Precision machined hard solid ceramicplungers, as well as thickened SST limit bolts, provide longer service life,better durability and applicability. Bearing Large tapered ball bearings ensure theconcentricity of the crankshaft connecting rod and ensure stable operation ofthe water pump. Crank axle Precision forging process and hardeningtreatment ensure the strength, service life, and durability of the crankshaft. Plunger connecting rod Super strong alloy material, splitstructure, higher load strength, longer service life, ensuring safe and stableoperation. Adual cylinder engine with strong horsepower and key start. Standard fittingï¼? Ceramic watergun 10 meters explosion-proofpressure resistantsteel wire high pressure pipe 2.2m inlet pipe + filter Multi-angle nozzle
Crankcase Precision cast oxidation treated surface ofthe crankcase. High and low pressure water seal components The high and low pressure water seal design of the "U" type "Nbr/Com/Buna N" material enhances the performance of the water pump and improves its service life. The plunger support guide ring ensures the coaxiality of the plunger, extending the service life of the water seal and plunger. Pump head assembly Selected stainless steel material, new andefficient structural design, high strength, no pores, long service life, andsafe operation. Reinforced 8-bolt fastening, 18mm, grade 12.9. Pommel Precision machined hard solid ceramicplungers, as well as thickened SST limit bolts, provide longer service life,better durability and applicability. Bearing Large tapered ball bearings ensure theconcentricity of the crankshaft connecting rod and ensure stable operation ofthe water pump. Crank axle Precision forging process and hardeningtreatment ensure the strength, service life, and durability of the crankshaft. Plunger connecting rod Super strong alloy material, splitstructure, higher load strength, longer service life, ensuring safe and stableoperation. Adual cylinder engine with strong horsepower and key start. Standard fittingï¼? Ceramic water gun 10 meters explosion-proofpressure resistantsteel wire high pressure pipe 2.2m inlet pipe + filter Multi-angle nozzle
Explore precision-engineered Ceramic Rotary Valve from a leading manufacturer. Crafted with ASTM A216 WCB carbon steel, this valve features a robust DN80 (3-inch) design with PN10 and Class 150 LB ratings. The bolted bonnet ensures secure operation, adhering to GB/T 12224 standards, and the RF flanged end provides seamless integration. Upgrade your industrial processes with this high-quality valve solution. Detail Information Ceramic rotary valve, Carbon steel, DN80, PN10, RF. Valve description: Ceramic rotary valve, bolted bonnet, rotary. Design: GB/T 12224. Body: ASTM A216 WCB Nominal size: DN80. Nominal class: PN10. End Connection: RF flange. Face to face: MFGâ??S. Test and inspection:GB/T 9092. Product Range: Body material: Carbon steel. Normal diameter: 2 - 16 Inch (DN50 - DN400). End connection: Flanged. Pressure range: PN10-PN16. Working temperature: -29- +150.
Explore our premium RF Flanged Center Line Butterfly Valve, meticulously crafted with precision for optimal performance. This valve boasts a 4-inch size (DN100), designed to withstand pressures up to 150 LB (PN20). Constructed from high-quality Stainless Steel, conforming to ASTM A351 CF8 standards, ensuring durability and longevity. Engineered to meet API 609 specifications, featuring EPDM rubber lining for superior sealing. Upgrade your system with this reliable valve solution today. Detail Information Center line-type Butterfly Valve, Stainless steel, NPS 4, CLASS 150 LB, body rubber lined. Valve description: Center line-type Butterfly Valve, RF, EPDM LINED. Design: API 609. Body: ASTM A351 CF8 Nominal size: 4 INCH. Nominal class: 150 LB. End Connection: RF. Face to face: API 609. Test and inspection: API 598. Product Range: Body material: Stainless steel. Normal diameter: 2 - 24 Inch (DN50 - DN600). End connection: Flanged, WAFER, LUG. Pressure range: Class 150 LB (PN6 - PN16). Working temperature: -29- +100
Explore our API 599 Bolted Bonnet Plug Valve Factory offering, featuring a 16 Inch size with DN400 dimensions, suitable for 600 LB and PN100 applications. Manufactured to API 6D standards using ASTM A216 WCB Carbon Steel, these valves are designed for lubricated, bi-directional flow, with RF End connections and equipped with gear operation. Detail Information Plug valve, carbon steel, NPS 16, 600 LB, WCB, RF, bi-direction, acc.to ANSI. Valve description: Plug valve, carbon steel, bolted bonnet, lubricated Design: API 6D, API 599 Body: ASTM A216 WCB Nominal size: 16 Inch. Nominal class: 600 LB. End Connection: RF Face to Face dimension: ASME B16.10. Test and inspection: API 598. Operation: GEAR Product Range: Body material: Carbon steel. Normal diameter: 1/2 - 14 Inch (DN15 - DN350). End connection: Flange. Pressure range: Class 150 - 1500 LB (PN16 - PN160). Working temperature: -29 - +300.
Looking for a reliable ASTM A182 F316 ball valve supplier? We offer a 3-inch, 300 LB, DN80, PN50 ball valve that meets API 608 standards. Made from high-quality stainless steel with a bolted bonnet and two-piece design, our soft seal ball valve features an RF end and a convenient lever for easy operation. Detail Information Ball valve, Stainless steel, bolted bonnet, NPS 3, 300 LB, F316, RF, FULL BORE. Valve description: Ball valve, Stainless steel, SOFT SEAL, TWO-pieces Design: API 608. Body: ASTM A182 F316 Nominal size: 3 Inch. Nominal class: 300 LB. End Connection: RF. OPERATION: LEVER Face to face: ASME B16.10. Test and inspection: API 598. Product Range: Body material: Stainless Steel. Normal diameter: 1/2 - 32 Inch (DN15 - DN800). End connection: BW, Flange. Pressure range: Class 150 - 2500 LB (PN16 - PN420). Working temperature: -29- +300.
Explore precision-engineered Ceramic Rotary Valve from a leading manufacturer. Crafted with ASTM A216 WCB carbon steel, this valve features a robust DN80 (3-inch) design with PN10 and Class 150 LB ratings. The bolted bonnet ensures secure operation, adhering to GB/T 12224 standards, and the RF flanged end provides seamless integration. Upgrade your industrial processes with this high-quality valve solution. Detail Information Ceramic rotary valve, Carbon steel, DN80, PN10, RF. Valve description: Ceramic rotary valve, bolted bonnet, rotary. Design: GB/T 12224. Body: ASTM A216 WCB Nominal size: DN80. Nominal class: PN10. End Connection: RF flange. Face to face: MFGS. Test and inspection:GB/T 9092. Product Range: Body material: Carbon steel. Normal diameter: 2 - 16 Inch (DN50 - DN400). End connection: Flanged. Pressure range: PN10-PN16. Working temperature: -29- +150
1 TON BIGBAG 4*6 CM 210 EURO 1 TON BIGBAG 5*10 CM 230 EURO 18/20/25 KG BAG/TON 4*6 CM 215 EURO 18/20/25 KG BAG/TON 5*10 CM 235 EURO PRICE INFORMATION IS FOR CONTAINER ORDER.
1 TON BIGBAG 150 EURO 18/20/25 KG BAG/TON 155 EURO
1*2-2*4CM BIGBAG 225 EURO 4*6-5*10-10*30CM BIGBAG 190 EURO PRICE INFORMATION IS FOR CONTAINER ORDER.
1*2-2*4 CM BIGBAG 225 EURO 4*6-5*10-10*30 CM BIGBAG 190 EURO PRICE INFORMATION IS FOR CONTAINER ORDER.
1 TON BIGBAG 155 EURO 18/20/25 KG BAG/TON 165 EURO PRICE INFORMATION IS FOR CONTAINER ORDER.
1 TON BIG BAG 155 EURO 18/20/25 KG BAG/TON 165 EURO PRICE INFORMATION IS FOR CONTAINER ORDER.
18/20/25 KG BAG/TON 175 USD 1TON BIGBAG 150 EURO 18/20/25 KG BAG/TON 160 EURO
