*Aluminium Handle bar with Nylon Grab *Quick-Flip Nylon Latchs *Silicon seal *Stainess steel hings *Corner SS#304 bottle openers *With Leak-Proof Drain Plug External dimension:54 35 39CM (21.26*13.78*15.3 5") Internal dimension (cm):36.4 21.5 26.5CM (14.33*8.46*10.4 3") Carton size (cm):57 41Ã?? 41CM(0.0958C BM/CTN) Gross/Net Weight:8.5/7.5KGS (18.74/16.53 LBS) Cold retention: 5days at 77 (25 C) with ice fully filled Container Load Quantity:295PCS/20GP; 605PCS/40GP; 710PCS/40'HQ; Main Material:lldpe wall+pu formed insulation Volume:25Quart/23Liters Packing:1 opp bag +1 piece /carton
*Aluminium Handle bar with Nylon Grab *Quick-Flip Nylon Latchs *Silicon seal *Stainess steel hings *Corner SS#304 bottle openers *With Leak-Proof Drain Plug External dimension:44*39*46CM (17.32*15.35*18.1 1") Internal dimension (cm):31.2*30.7*36.6C M (12.28*12.09*14. 41") Carton size (cm):45.5*40.5*49C M(0.09CBM/CT N) Gross/Net Weight:9.5KGS/8KG S (20.95/17.64 LBS) Cold retention:â?¥5days at 77â??(25�°C) with ice fully filled Container Load Quantity:310PCS/20GP;64 5PCS/40GP;755P CS/40'HQ; Main Material:lldpe wall+pu formed insulation Volume:33Quart/31Liters Packing:1 opp bag +1 piece /carton
*Aluminium Handle bar with Nylon Grab *Quick-Flip Nylon Latch *Air Release Valve *Silicon seal *Stainess steel hings *EVA pad on top of lid for choice *With SS#304 water tap. External dimension:34 2 35CM (13.39*10.63*13.7 8") Internal dimension (cm):19 18 27CM (7.48*7.1*10.63") Carton size(cm):38.5 30.5 37.5CM(0.044C BM/CTN) Gross/Net Weight:5.5KGS/4.5K GS (12.12/9.9LB S) Cold retention: 5days at 77 (25 C) with ice fully filled Container Load Quantity:630PCS/20GP; 1300PCS/40GP; 1545PCS/40'HQ; Main Material:lldpe wall+pu formed insulation Volume:10Quart/9.5Liters Packing:1 opp bag +1 piece /carton
*Aluminium Handle bar with Nylon Grab *Quick-Flip Nylon Latch *Air Release Valve *Silicon seal *Stainess steel hings *EVA pad on top of lid for choice *With SS#304 water tap. External dimension:34 27 35CM (13.39*10.63*13.7 8") Internal dimension (cm):19 18 27CM (7.48*7.1*10.63") Carton size(cm):38.5 30.5 37.5CM(0.044C BM/CTN) Gross/Net Weight:5.5KGS/4.5K GS (12.12/9.9LB S) Cold retention: 5days at 77 (25 C) with ice fully filled Container Load Quantity:630PCS/20GP; 1300PCS/40GP; 1545PCS/40'HQ; Main Material:lldpe wall+pu formed insulation Volume:2.5Gallon/9.5Liters Packing:1 opp bag +1 piece /carton
Place of Origin Hubei, China Type Electric Rail Cutting Machine Material Aluminium Dimensions (L x W x H) (mm) 85*48*50 Brand Name Linkage Model LJ-LDC2001 Rated voltage (AC.V) 220 Motor power (Kw) 7 Weight (Kg) 13 Battery pack capacity(Ah) 12-20 Optional Operating temperature range ( C) -40~50 C Packaging and delivery Packaging Details Export Standard Wooden box + pe bag+paper carton, 1 unit/Wooden box , G.W: 18KG Selling Units: Single item Single package size: 85X48X50 cm Single gross weight: 18.000 kg
Tata Chemicals' natural light soda ash is a white, alkaline granular material. It is a low-density soda ash that is used as a key input in several industries. Soda ash is an essential ingredient in many familiar products such as glass, soap, powdered detergent, paper, textiles and even food. NA2CO3Chemical Formula: NA2CO3 Soda ash is a non-toxic, non-flammable and incombustible chemical, and it comes in an odorless powder form. It is accessible in three distinct grades, which are washing soda, light soda ash, and dense soda ash.Soda Ash Light or light Soda Ash is an important basic industrial alkali chemical used in soap and detergents, pulp and paper, iron and steel, aluminium cleaning compounds, water softening and dyeing, in fibre reactive dyes, effluent treatment and production of chemicals.
Steel Handle (With Hook, With Blade) & Vinyl Case Feature: - Attractive Design - Ergonomically designed to minimize hand fatigue during a prolonged period of usage - Diverse Handles ( Rubber Handle, Aluminium Die-casting Handle, Plastic and Rubber Handle,Pipe Handle) - Diverse packing methods (Plastic sheath & Vinyl sheet) - Replacement Saw Blade Available (When the saw blade worn out,only the saw blades needs to be replaced on the existing Handle) - Can be fitted on with our pole model Blade Parts - Material : High-carbon steel - Teeth impulse hardening - Surface finished :Hard-chrome plated - Protected rust resistance - Teeth design : Teeth with three cutting edges Cuts three times faster than conventional saws - Widen the space between the teeth - Pad print Use - For garden pruning and trimming - For camping - For hunting - Handy tool for the home - For forest industry
Feature Attrative Design Ergonomically Designed To Minimize Hand Fatigue During A Prolonged Period Of Usage Diverse Handles Diverse Handle Colors(Made In Any Color Of Choice) Diverse Packing Methods Replacement Saw Blade Available Specification: Abs Plastic Handle & Plastic Sheath Blade Length (Mm) : 330 Mm, 350 Mm Blade Thickness : 1.20 T Teeth Pitch : 4.25 Mm Packing : In/ct 12 Pcs/48 Pcs Feature Attractive Design Ergonomically Designed To Minimize Hand Fatigue During A Prolonged Period Of Usage Diverse Handles (Rubber Handle, Aluminium Die-casting Handle, Plastic And Rubber Handle, Pipe Handle) Diverse Packing Methods (Prastic Sheath, Vinyl Case) Replacement Saw Blade Available (When The Saw Blade Worn Out, Only The Saw Blade Needs To Be Replaced On The Existing Handle)
Steel and Rubber Handle (With Hook, With Blade) & Vinyl Case Feature: - Attractive Design - Ergonomically designed to minimize hand fatigue during a prolonged period of usage - Diverse Handles ( Rubber Handle, Aluminium Die-casting Handle, Plastic and Rubber Handle,Pipe Handle) - Diverse packing methods (Plastic sheath & Vinyl sheet) - Replacement Saw Blade Available (When the saw blade worn out,only the saw blades needs to be replaced on the existing Handle) - Can be fitted on with our pole model Blade Parts - Material : High-carbon steel - Teeth impulse hardening - Surface finished :Hard-chrome plated - Protected rust resistance - Teeth design : Teeth with three cutting edges Cuts three times faster than conventional saws - Widen the space between the teeth - Pad print Use - For garden pruning and trimming - For camping - For hunting - Handy tool for the home - For forest industry
We are Ozgur Sunger Lastik ltd sti. from Velime�?e,Tekirda�? Turkey. We have been serving in the rubber industry over 40 years. We are manufacturer of molded and extruded Rubber products and all kinds of special orders like aluminium facade system, Door, window seals made of rubber since 1977. It would be our pleasure to be your supplier. Because we are sure that we can offer you more effective prices, short delivery termin and the quality which will meet your needs. Our monthly producing capacity is 300 tons of Epdm Rubber and seals. We supply EPDM, NBR , SBR, NR, TPE, Sponge and Solid profiles,Gaskets, aluminum gasket,O-Rings,V-Profieles,Uprofieles, U wick gasket, hatch Cover Gasketsâ?¦ over 3000 products to more than 20 countries.
â??Product Name: Pneumatic flange ball valve Valve Type: Ball valve Design Standard: GB,ANSI,DIN,JIS Working Pressure: 0~1.6Mpa Medium: water, gas, oil, acid, alkali Medium Temperature: -20�ºC~+180�ºC Port Size: DN15-DN200 Connection: flange Structure: floating full port Body Material: cast steel, stainless steel Seat Material: PTFE Application: water system, waster water system, oil& gas industry Driving Way: Pneumatic actuated Actuator Material: Aluminium Alloy Actuator Model: AT52D-AT115D Action: double-acting Rotary Angle: 90�° Air Pressure: 4~8bar Cylinder Size: 52-115 mm Output Torque : 20-344 NM Working Temperature: -20C~+80C Air Access: G1/4" Warranty: 12 months
Product: Baby wet wipes/ Baby Wipes Skin Care Non-woven Unscented Specifications: Biodegradable baby wet wipes organic baby body cleaning wipe Place of Origin: Henan, China Brand Name: Pitr Med Material: Spun lace Non-Woven Type: Household Sheet Size: 150*180mm (custom) Age Group: Babies Use: Cleaning Application: Baby Skin Cleaning Feature: Aluminium film inner wall Certifications: CE/ISO Packing: 80pcs/bag (custom)Lid open Weight: 50g/piece Color: White Function: Cleaning Keyword: Bab Wipe Wet Quality: High quality OEM/ODM: Welcomed Product name: Baby hand and mouth wipes Packaging: 80pcs/bag MOQ: 5000/bags Pricing:Unit Price: 0.54$ Shipping Cost: Negotiable Lead Time: Production Lead Time: 10 Days Shipping Lead Time: 15 Days
The allterrain NITRON 12 Big Wheel Scooter features 12 inch front and rear pneumatic tyres to travel further and faster over mixed terrain Glide from the pavement to grass to gravel effortlessly thanks to the large slipresistant and shock absorbing tyres BMX STYLED SCOOTER POWERED Constructed with a lightweight durable steel frame and fork with aluminium hubs the NITRON 12 Big Wheel Scooter is made to perform on the toughest terrains BMX style handlebars with front and rear Vbrakes provide familiar and reliable control for confident riding while the wide textured deck with antislip covering provide a stable base to maintain rider balance THE iGLIDE NITRON 12 BIG WHEEL SCOOTER FEATURES An Ideal Design for the PreTeen Adventurer A Lightweight Durable Steel Frame Wear and RustResistant Powder Coated Finish BMX Style Handlebars w Height Adjustable Stem Front Rear Vbrakes A Wide Reinforced AntiSlip Foot Deck
The X-MET8000 is practical, rugged and easy to use to deliver results you can trust. The light and ergonomic design of the X-MET8000 ensures it is comfortable to use on a daily basis. The nose is designed to test material inside bends and corners. Using Hitachi HEROTM window, which is heat resistant, the X-MET8000 can accurately analyze alloys up to 400 C. The X-MET8000 range of handheld X-ray fluorescence analyzers delivers the performance needed for rapid alloy grade identification and accurate chemistry of a wide variety of materials (solid and powder metals, polymers, wood, solutions, soil, ores, minerals etc). The X-MET handheld XRF analyzer (HHXRF) is practical, robust and easy to use to deliver results you can trust. The X-MET series of handheld X-ray fluorescence (XRF) analysers are flexible and easy-to-use for elemental analysis within production environments, manufacturing plants and scrap metals processing. The optimised combination of a high performance X-ray tube & large area silicon-drift detector (SDD) delivers the performance required for the most demanding PMI and scrap metals applications. The Hitachi XMET-8000 comes in 3 configuration options: XMET800 Smart, XMET8000 Optimum and X-MET8000 Expert. X-MET 8000 Optimum can provide results on site in seconds, depending on the application. Phenomenal reliability and speed, with no requirement to return for lab assessment, mean optimum productivity, lower costs and an all-important edge over your competitors. Data can be stored on the analyzer, on a USB flash drive, or through our app and cloud service for immediate sharing. Designed to be portable, simple to use and with a with a 10-12 hour battery life, the X-MET8000 Optimum Geo is able to withstand the harshest environments and weather conditions. It also offers analysis results in seconds with real time data sharing for fast decision making. The Boost technology delivers low levels of detection while the integrated GPS enables users to combine geolocation data with analyses results for flawless site mapping. Key Features: X-ray tube : 40kV or 50kV X-ray tube filters: Single Detector: Large area SDD Max. sample temperature : 100�ºC or 400�ºC with HEROâ?¢ heat resistant window (optional) IP54 rating Protection against detector window damage : Optional window shield Calibrations : Standardless (includes light elements analysis) Integrated camera (Optional) Small-spot collimator (Optional) 6-position filter wheel for the optimised analysis of all elements from Mg to U
Application (1)Aluminium clad steel wire/strand is used for various voltage level power transmission lines , overhead transmission lines and overhead ground wires. (2)It can also be applied in various special areas with long span length, coastal areas and island as well as other hot and humid regions, salt fog regions and heavily polluted regions where the high corrosion resistance strand is needed. (3)Aluminium clad steel wire/strand can also be used as messanger wire for electrified railways. Specification Nominal Diameter Area Min Tensile Strength Calculated Breaking Load Min Coating Thickness 20 �ºC Max D.C Resistance at 20 degree Weight mm AWG Mm2 Mpa KN mm Ohm/KM Kg/Km 2.052 12 3.307 1340 4.5 0.103 25.64 21.80 2.304 11 4.169 1340 5.6 0.115 20.34 27.49 2.589 10 5.260 1340 7.1 0.130 16.12 34.66 2.904 9 6.633 1340 8.9 0.145 12.78 43.65 3.264 8 8.367 1340 11.2 0.163 10.14 55.14 3.477 7 9.495 1310 12.4 0.174 8.93 62.57 3.665 7 10.55 1280 13.5 0.183 8.04 69.48 3.934 6 12.16 1240 15.1 0.197 6.93 80.13 4.115 6 13.30 1210 16.0 0.206 6.38 87.62 4.392 5 15.15 1170 17.7 0.220 5.60 99.84 4.620 5 16.76 1140 19.1 0.231 5.06 110.50 4.775 4 17.91 1100 19.7 0.239 4.73 118.0 5.189 4 21.15 1070 22.6 0.259 4.01 139.34
Plastic Granulating Machine Plastic granulating machine is industrial equipment used to process plastic waste materials into small, uniform plastic granules or pellets. These granules can then be used as raw material in various plastic manufacturing processes, such as injection molding, extrusion, and more. Plastic granulating machine play a crucial role in recycling plastic waste and reducing environmental impact by transforming discarded plastic items into valuable resources. Ensure the smooth size reduction of PP, PE, PET, PVC and other plastic and rubber products in various sizes. The plastic granulating machine has high speed and sharp blades, and is usually used for secondary crushing It has a solid welded steel structure and stable operation, but during the crushing process, metal and similar hard foreign objects are not allowed to enter the crushing cavity. The 4 rotors are designed for a variety of applications and produce a homogeneous regrind whose size is determined by the sieve openings. Plastic granulating machine offer two main types of rotors: one for soft plastics and one for hard plastics. The resulting regrind can be conveyed and collected pneumatically, forming an in-house simple plastic recycling system that is dust-free and reduces labor costs. As one of our best-selling types of plastic recycling machines, these plastic granulating machines are packaged in many of our complete recycling solutions, including our popular PET bottle washing lines, plastic film recycling lines, and more.
Anmei, one of the professional plastic master batch manufacturers, has a range of customized masterbatches available which incorporate Anti-mold Masterbatch, for use in different polymers and applications. It is to prevent unbearable odors and unsightly staining. The Development Process of Anti-Mold Masterbatch The antistatic masterbatch development process begins with your end-used products. We select the proper resin, colorants, additives, modifiers and fillers to meet your performance and test requirements. Once the properties are approved by your, samples may be produced for pre-production trials. Benefits of conductive masterbatch Moldy plastics emit an unpleasant smell and make them undesirable or unusable due to the decreasing of the aesthetics of the product surface. When an anti-mold masterbatch was used, it can inhibit mold growth and prevent odors and stains. It includes as its primary function the removal of micro-bacteriological charges and above all the removal of mold and fungi. The working principle of anti-mold masterbatch is different from that of antimicrobial masterbatch. Just the right anti-mold masterbatch based on your end-use areas can reach a certain level of effect. Application of antiblock masterbatch Anti-mold masterbatch applications can be numerous and can be applied to ABS, PA, PP, PE, and other polymers and manufactured in an injection molding, extrusion, and blown film. The strong protective effect of this antiblock masterbatch is suitable for use in the sector of water box of floor scrubber. Want to buy masterbatch, contact us. There are many masterbatch suppliers, but we are one of the best choices for you.
Plastic Granulating Machines Plastic granulating machines are industrial equipment used to process plastic waste materials into small, uniform plastic granules or pellets. These granules can then be used as raw material in various plastic manufacturing processes, such as injection molding, extrusion, and more. Plastic granulating machines play a crucial role in recycling plastic waste and reducing environmental impact by transforming discarded plastic items into valuable resources. Ensure the smooth size reduction of PP, PE, PET, PVC and other plastic and rubber products in various sizes. The plastic granulating machines have high speed and sharp blades, and is usually used for secondary crushing It has a solid welded steel structure and stable operation, but during the crushing process, metal and similar hard foreign objects are not allowed to enter the crushing cavity. The 4 rotors are designed for a variety of applications and produce a homogeneous regrind whose size is determined by the sieve openings. Plastic granulating machines offer two main types of rotors: one for soft plastics and one for hard plastics. The resulting regrind can be conveyed and collected pneumatically, forming an in-house simple plastic recycling system that is dust-free and reduces labor costs. As one of our best-selling types of plastic recycling machines, these granulators are packaged in many of our complete recycling solutions, including our popular PET bottle washing lines, plastic film recycling lines, and more. Plastic Granulating Machines Advantage A plastics granulating machines are a piece of equipment used in the recycling industry to convert plastic waste materials into small, uniform-sized plastic granules. Some of the advantages of using a plastic granulator machine include: Efficient recycling: Plastic granulator machines can efficiently process a large volume of plastic waste materials, reducing the amount of plastic waste that goes to landfills and helping to conserve natural resources. Consistent output: The granules produced by the machine are of a consistent size and shape, making them ideal for use in a variety of plastic products. Versatility: Plastic granulator machines can process a wide range of plastic materials, including PVC, PE, PET, and more.
bestscooterstore * com Product Description ORBEA CARPE 10 DISC HYBRID BIKE 2021 Ultimately versatile, the Orbea Carpe 10 Disc Hybrid Bike is designed to fit around your busy lifestyle. Built on a high-quality Aluminium 6000 frame, this bike is robust and lightweight, making it perfect for daily commutes and leisure rides, while the inclusion of a rear rack means you can even carry your shopping home too. High-quality Shimano components deliver crisp and reliable shifting through the 10-speed Deore gearset, while hydraulic disc brakes are the perfect addition to help you stop with modulation in any weather. And when it's raining, you'll enjoy the benefits of the included SKS EDGE mudguards to help you stay dry. Another fantastic addition to this bike's specification is the dynamo-powered light set. A Spanninga Pixeo rear light and Kendo XDAS front light are powered by the dynamo and won't run out of batteries, so you can ride safely in the knowledge you're easier to spot on the road. HIGHLIGHTS Orbea Urban Speed Aluminium 6000 frameset Lightweight carbon fork for nimble handling and smooth ride feel High-quality Shimano Deore 10-speed gearset Powerful Shimano hydraulic disc brakes Dynamo powered front and rear lights Rear luggage rack SKS mudguards SPECIFICATION Frame� � � Orbea Urban Speed Aluminium 6000, Orbea Tube Shaping, Flat Mount Disc Brake, 135x9mm QR, Carrier and Mudguard compatible, max 700x40C, Inner Cable routing Fork  Orbea Speed 400mm Carbon, Flat Mount Disc Brake Stem Orbea TDS-C301 Handlebar Orbea AL320 Riser 680mm Front Brake  Shimano MT200 hydraulic disc Rear Brake  Shimano MT200 hydraulic disc Brake Levers  Shimano MT200 hydraulic disc Front Derailleur  N/A Rear Derailleur  Shimano Deore M5120 SGS Shadow Plus Shift Levers  Shimano Deore M4100 10-speed Cassette  Shimano Deore M4100 11-46t 10-speed Crankset  Orbea Alloy 42t Front Whee  Orbea Airline Corsa Disc 700 x 19c clincher Rear Wheel  Orbea Airline Corsa Disc 700 x 19c clincher Front Tyre  Kenda K1067 700x38C Reflective type plus puncture protection, clincher Rear Tyre  Kenda K1067 700x38C Reflective type plus puncture protection, clincher Saddle  Velo 1221 Seatpost Orbea C255 27.2x300mm Accessories  Orbea rear luggage carrier (Max Front Light  Joss Spanninga Kendo XDAS Dinamo Rear Light Spanninga Pixeo Dynamo  Shimano DH-3D37-NT, 6V Dynamo 3.0W
Contract length One Year Commodity Copper Cathodes Purity 9999 Cu Form Electrolytic Origin Republic of Zambia Quantity 61000MT Sixty One Thousand Metric Tons First shipment 1000 MT One Thousand Metric Tons Monthly shipment 5000 MT Five Thousand Metric Tons Price Less 12 Twelve Per cent LME Price of the day Loading Port Dar Es Salaam Port Tanzania or Durban Port South Africa Discharge Port xxx xxxxxxxx Incoterms Strictly CIF Cost Insurance and Freight Delivery term Strictly CIF Cost Insurance and Freight Payment Terms Secured by SBLC MT 760 Operative Irrevocable Non Transferable Unconditional Confirmable Standby Letter of Credit MT 760 as Payment Guarantee and finally by Telegraphic Wire Transfer MT 103 After Final Inspection of Quality and Quantity by SGSCICC report at final destination port until Five 5 banking days Note No advance payment will be required by Seller or his representative as long as the SBLC MT 760 is in place and is in active Seller shall use his own resources to ship the copper cathodes to Buyers destination Refinery 1SPECIFICATIONS NONLME Electrolytic Copper Cathodes Grade A Purity Cu 9999 Maximum 9997 Minimum conforming to the LONDON METAL EXCHANGE LME specification Cathode Grade Designation Cu Cath 1 CHEMICAL COMPOSITION ON DRY BASIS PERCENTAGE IN WEIGHT Cu 9996 9999 Rejection below 9996 Sulphur Sppm 4 Cobalt Coppm 02 Iron Feppm 2 Arsenic Asppm 01 Silver Agppm 10 Bismuth B1ppm 01 Lead Pbppm 02 Manganese Mnppm 01 Nickel Nippm 02 Tellurium Teppm 005 Selenium Seppm 03 Aluminium Alppm 05 Antimony Sbppm 01 Magnesium Mgppm 04 Silica Sippm 03 Zinc Znppm 04 2MEASUREMENT 914 mm x 914 mm x 12 mm LME Standards App 36 X36X05 Weight of each sheet 125 Kilograms Approximately 2 Net weight of each pallet 2000 Kilograms Approximately 2 Net weight per container 200 Metric Tons Approximately 2 Gross weight per container 222 Metric Tons Approximately 2 3 PACKING Palletised Aluminium banded Bundles of bare unsoiled nonoxidized Copper Cathode plates and banded by aluminium bands suitable for long distance transportation and well protected against scattering shock and rust Net weight of each bundle 25MT 1 No wooden packaging allowed 4PRICE AND PAYMENT GUARANTEE PROCEDURE Value of SBLC MT 760 shall be equivalent to one 1 month shipment value with a validity period of One Year and One Day Rolls and Extensions Both parties understand and agree that SBLC via MT 760 shall be issued only from one of the Top Prime Banks located in major cities of Middle east Western Europe Asia or US
