Features: It is of various types. It is suitable for crushing maximum, medium and minimum stones. The operating principle is easy to be operated. The structure is simple and it is easy to maintain.
Truck crane tadano tg550
Chemistry gypsum powder production line:ªG building gypsum powder. Chemistry gypsum is refers to the industrial production process, forms industrial products, such as desulphurization gypsum, phosphorus gypsum, fluorine gypsum, lemon gypsum and so on.Raw material characteristic:the surface water is more than 20%, the ingredient relative is unstable. Building gypsum powder production technology introduction: Uses raw material pre-drying , bolling stove calcine that two step calcine technique of production, use car loader to transport raw material from dump site to material basket, by beater, the belt conveyer to transport uniformly to the dryer(the heat source of this place is that burn coal the hot-blast stove), though collection powder equipment vertical transmisslon equipment brought into boilling stove calcined(that furnace heat is the htf stove), after calcination shipped goals mushroom grinding machine modified and cooling, and from promotion transportation to the warehouse, packaging warehouse. Wooden case & plaste
When heating and calcining the dihydrate gypsum, the dihydrate gypsum will be decomposed, we can produce the semi-hydrated gypsum (CaSO4?/2H2O) , that is building gypsum, also called plaster of paris. Because of the different temperature and pressure when decompose the gypsum, we can get different product, a-type gypsum and b-type gypsum. a-type gypsum is high-strength gypsum,b-type gypsum is building gypsum. They are the same technology using mechanisation producing building gypsum. The process can be divided into three system, crashing system, calcining system and milling system. Wooden case & plaste
Capacity: max 11 pcs in width Size:400*380*600mm Power supply: 220v/110v Power: 400w Surface: 2mm stailess steel Cardboard thickness: 0.5-3mm. Weight: 180kg Axis diamater: 100mm Color: silver grey. Spare parts: Chain: 1 pc Spanner: 1 pcs. Dies list for it: A4 -88 pcs A4 -120 pcs A6 -40 pcs 8"x10" -20pcs 8"x10" -20pcs 8"x10" -30pcs 8"x10" -110pcs 4"x6" -20pcs 4"x6" -30pcs 5"x7" -40pcs 6"x8" -48pcs 8"x10" -60pcs 225*165mm -30pieces 200*130mm -54pieces Heart shape: 15cmx15cm--8pcs 25cmx25cm-80pcs.
The machine applies to 90 v groove cutting for aluminum and plastic profiled bar which is clamped and cut by pneumatic drive ; it has characteristics of simple operation , high safety, exact cutting dimension, and convenient maintenance. Technical Parameter: Air pressure:0.4-0.6MPa Air consumption:80L/min Input voltage:380V 50HZ Total power:0.75KWx2 cutting depth:0-65mm Welding length:300-1700mm.
The machine applies to processing glass strip ; it adopts saw bits that can cut off and chamfer angle for glass strip at one time .the machine is horizontal fixed. It has characteristics of simple operation ,stable running ,convenient clamping for ptofiled bar; its work efficiency is high. Technical Parameter: Air pressure:0.4-0.6MPa Air cosumption:80L/min Input voltage:380V 50HZ Total power:0.75KWx2 Speed:2800r/min Welding length:320-1800mm.
Block machine
1. Main technical parameters: 1)Vibration style: Moulds and platform sympathetic vibration 2)Voltage(v): 380 3)Pallet size(mm): 850*680 4)Weight(t): 8.6 5)Power(kw): 29 6)Tiptop vibration frequency(r/min): 6000 7)outline dimension(mm): 6750*2205*2780 8)cycle time(sec): 15~18 2.production capacity Block item Brick size(mm) Pieces/mould Pieces/shift(8 hours) Hollow block 390*190*190 6 10112 Porous block 240*115*90 18 34000 Standard brick 240*115*53 36 68000 Ground brick 200*110*60 24 46000
It is mainly used for exterior wall construction, decoration, cleaning and maintenance of high-rise buildings. The safety lock automatically fasten the steel wire rope within 100mm, when the load cable is stuck or broken, out of hoist or the platform is inclined. The platform can be made of steel or aluminum alloy according to your desire. The specifications are as follows, Model: Zlp 630 Zlp 800 Rated loading capacity: 630kg 800kg Lifting speed: 9.6m/min 8m/min Length of the platform: 1m-6m 1m-7.5m(according to the customers' desire) Standard length: 2m*3 set 2.5m*3 set Weight of the platform: 358kg 450kg Power of the motor : 1.5kw*2set 2.2kw*2set Model of the hoist : ltd6.3 Ltd8.0
Advantages 1Its very rigid body frame is welded by shaped steel tube, no deform. 2It can perform horizontal, vertical directions and cubic 3 directions cut. 3Built-in converter is used for wide scope speed so is motion stable and a fit slow feed back. 410KVA malt lead special transformer is multi-lead for poly step voltage adjust, so is high production efficiency and long use life. Specification and parameter Type Unit XMC-2000 XMC-3000 XMC -4000 XMC-6000 XMC-8000 Items Cutting block size MM 2000-1300 -680 3000-1300 -680 4000-1300 -1300 6000-1300 -1300 8000-1300 -1300 Over all dimension MM 4500-1640 -2700 5800x1950 x1850 6800x1950 x2450 8800x1950 x2450 10800x1950 x2450 Weight Kg 800 1000 1200 1600 2000 Power Kw 11.2KW 11.2KW 11.2KW 11.2KW 11.2KW Seworthy
1.Size of Coil1220+¼-0.71.2+¼-L; aluminum,prepainted steel or GI steel coilYield strength G550Mpa 2.Working speed15m/min(not include cutting) 3.Roll station24stations 4: Material of roller: 45forge steel, polished and coated with chrome 5: Material of main shaft:45forge steel diameter roller90mm 6.Main power22Kw 7.Hydraulic station power5.5Kw 8.Hydraulic pressure12 Mpa 9.Control Panel: PLC, Simenz 10. Material of blade Cr12Mov 11.Thickness 0.81.2mm 12 Tolance3m+-1.5mm 13 Way of drive:one inch chain 14 380V 50HZ 15 Uncoiler: 10Ton Manual passive uncoiler 16 Three roller which can curve the final product according to the profiles
1.1 Main dimension: 11400 x 1600 x 1800mm 1.2 Total weight: 14000kg 1.3 Main motor: 18.5kW 1.4 Hydraulic motor: 5.5kW 1.5 Hydraulic pressure: 15-20MPa 1.6 Steps of rollers: Feeding & guiding: two sets Leveling: one set, seven rollers Main forming: 17 steps Rib making: one step Rectifying: one step 1.7 Forming speed: 15 m/min maximum 1.8 Changing speed from one profile to another or from one size to another size: 3 minutes. 1.9 Purling specifications: For C purling: 100-350mm For Z purling: 100-350mm 1.10 Suitable material: 1.6-3.2mm, Q195~235 cold rolled steel, hot-zinc coil 1.11 Material of rollers: GCr15, 9CrSi, quenched 1.12 Material of rib roller: GCr15, 40Cr, quenched 1.13 Shape of rib: slash rib 1.14Dimension of punch adjustable:45-500mm Seaworthy
Eps sandwich panel machine, sandwich panel machine, rock wool sandwich panel machine, pu sandwich panel machine, sandwich panel machinery, sandwich panel line Seaworthy
Optional trolleyáwheel ModelZS60 EngineAir-cooled,4-cycle cylinder Engine typePetrol,Honda GX 160 Power kw(hp) 4.0(5.5) Weight kg(ibs) 64(140) Frequency(vpm) 5600 Centrifugal Force(kN)10.5 Compaction Depth cm(in)20(8) Travel Speed cm/s(in/s)40(16) Efficiency m2/hr(ft2/hr)450(4800) Plate Size cm(in)53+35(21+14) Dimension cm(in)102+40+97(40+15+38) Packing way: Steel frame outside the carton Gross weight:69KG. Packing size: 720*410*620á
Sand washing machine Model Wheel Size (mm) Max feed size (mm) Power (kW) Weight (t) Capacity (t/h) Overall dimension (mm) XSD2610 2600 1000 10 5.5 2.7 20-50 3255 1982 2690 XSD2816 2800 1600 10 11 3 30-60 3540 3000 2880 XSD3016 3000 1600 10 15 3.3 50-100 3845 3000 3080 In bulk
This machine is the latest model that is developed for minimizing the manpower. On this machine, the system is working from roll to roll or roll to cut piece. The machine is formed of the following units; Roll feeding unit with edge control Side sealing unit Reserve unit Spout sealing unit -1 (bottom spout sealing) Spout sealing unit -2 (top spout sealing) Perforation unit Bottom sealing unit Roll re-winder unit (optional) Length cutting (cold cut) unit
Removable tunnel kiln of making clay bricks
Scarifier Description:- This is the latest in grinding technoiogy for rernoving all types of coatings, stains, contamination and flooring inperfections. High performance machine for concrete floor preparation. Ideal machine for preparing ondustrial floors to take epoxy or other toppings. Removes up to 4mm in one pass. Handwheel for precise grinding depth. Two speed forward and reverse transmission. High performance octagonal carbide tipped cutters. Vacuum attachment, lifting sling, safety switch. 7.5 KW, 440 w motor, Weight 350 Kg. Working width 300mm. Output : 50 m2/hr.
Rammer Specifications:- Length of compaction shoe - 700mm Width of compaction shoe - 500mm over all length - 1500mm over all width - 500mm over all height - 1500mm Travel speed - 10m/min Depth of compaction - 30cm Weight - 150kg
