Medical Equipment Machinery Suppliers and Manufacturers

Fresinius 4008S dialysis machine with NIBP OCM

Philips Heartstart XL Biphasic Defibrillator Accessories ( battery , ecg cable , Power cord )

Thumb wrist joint splint (tubular type) AJY-S06 For the first metacarpophalangeal joint, interphalangeal joint and acute arthritis, wrist sprain, synovitis, carpal navicular fracture fixation. 325*185*3.2mm LOW TEMPERATURE THERMOPLASTIC SHEET Product features: Low temperature thermoplastic sheet is a new type of material made of specially synthesized polymer polycaprolactone treated by a series of chemical methods. Molecules are in a stable state at room temperature (10-30C), and can be softened after being heated in 65-70C water for 1-3 minutes. Curing in 3-5 minutes at room temperature. It has the advantages of light weight, high strength, good air permeability, not afraid of water, non-toxic, odorless, non-irritating to the skin, etc., and has biodegradability. Scope of application: 1. Fixation after reduction of fractures and joint dislocations 2. Postoperative fixation of soft tissue injuries such as joint ligaments, nerve and tendon injuries 3. Bone, joint tuberculosis, acute and chronic osteomyelitis, septic arthritis, primary bone Fixation during conservative treatment such as tumor metastasis or after debridement 4. Joint deformity, nerve palsy, cerebral palsy, scoliosis correction and postoperative fixation in children and fixed 5. Fixation after burns and other plastic surgery operations 6. Production and application of rehabilitation braces and orthoses 7. Posture placement and fixation during radiotherapy

Neck traction fixer Introduction of the neck traction fixer: The dx-series of neck traction fixer is a new type neck tractor as a product of health care. This neck traction device elongates and exercises the neck and decreases the pressure between the discs. Frequent usage can promote better blood circulation and stress relief, air neck traction fixer system allows for deep neck muscle relaxation. The neck traction would assist to relief the tension, neck pain, muscles spasms, stress and pressure in the neck area. It is a product that combine the traction, fix, and magnetic cure and health care, especially helpful for the mid age and old age people and computer operators and officers who will feel uncomfortable in neck area after work or after standing, sitting, or walking all day. The net weight of the neck traction fixer is about g. The character of the neck traction fixer: Our product is the class i device, has got exclusive patents (invention patent, new practical patent and shape patent) and is fda certified product. The necktraction fixer has the ability to adjust to different diameters and heights. The diameter scope is from . Cm to . Cm. The heights scope is from cm to cm. The circumference of the necktraction fixer can adjust from cm to cm. The traction power can reach kg. The net weight of the necktraction fixer is g. Inner of the necktraction fixer is made from the rubber latex; the outside of the necktraction fixer is made from the cotton flannel. The linker and pneumatic bulb are made from the rubber latex. The person who always sits before the office table takes in the writing, or operating the computer or other work. And the driver always sits in the whole day. These persons have the pain neck disease or often feel fatigue in the neck area. Our products can help them reduce the pain and cure and prevent neck pain and fatigue, muscles spasms. There are two models as dx-a and dx-c. Dx-a is that the neck traction fixer without the magnets. Dx-c is that the neck traction fixer with the magnets. The differences between dx-a and dx-c: The appearance of the dx-c is same the dx-a. The difference is the magnets. Inside of the second layer there are three magnets, which is made by 1600 gauss magnet. The 3 points lie in respectively fengchi pointfengfu pointfengchi point, which can stimulate the circulation of blood. On the surface of dx-c is the material of far infrared. The net weight of the each neck traction fixer is about 250g. Characteristic of use: A) practical and effective: not only can be used inside and outside the room, but also can be sued in sitting, traveling and lying. Frequent use of the product would effectively aid the prevention and treatment of cervical spondylopathy; alleviate the fatigue in neck area. B) convenient for carrying: a handy design for carry-on easy. C) simple operation: it is portable and adjustable of angle and strength of traction by yourselves. D) safety: this product causes no pain, risk used and any side effect if used in accordance with the instruction given. Beijing daxiang new material and technology co.

Neck traction fixer Introduction of the Neck Traction Fixer: The DX-series of Neck traction Fixer is a new type neck tractor as a product of health care. This Neck Traction device elongates and exercises the neck and decreases the pressure between the discs. Frequent usage can promote better blood circulation and stress relief, Air Neck Traction Fixer system allows for deep neck muscle relaxation. The neck traction would assist to relief the tension, neck pain, muscles spasms, stress and pressure in the neck area. It is a product that combine the traction, fix, and magnetic cure and health care, especially helpful for the mid age and old age people and computer operators and officers who will feel uncomfortable in neck area after work or after standing, sitting, or walking all day. The net weight of the neck traction fixer is about 220g. The character of the Neck Traction Fixer: Our product is the Class I device, has got 3 exclusive patents (Invention Patent, New Practical Patent and Shape Patent) and is FDA certified product. The Necktraction Fixer has the ability to adjust to different diameters and heights. The diameter scope is from 8.9cm to 15.3cm. The heights scope is from 1cm to 24cm. The circumference of the Necktraction Fixer can adjust from 28cm to 48cm. The traction power can reach 80kg. The net weight of the Necktraction Fixer is 250g. Inner of the Necktraction Fixer is made from the rubber latex; the outside of the Necktraction Fixer is made from the cotton flannel. The linker and pneumatic bulb are made from the rubber latex. The person who always sits before the office table takes in the writing, or operating the computer or other work. And the driver always sits in the whole day. These persons have the pain neck disease or often feel fatigue in the neck area. Our products can help them reduce the pain and cure and prevent neck pain and fatigue, muscles spasms. There are two models as DX-A and DX-C. DX-A is that the Neck Traction Fixer without the magnets. DX-C is that the Neck Traction Fixer with the magnets. The differences between DX-A and DX-C: The appearance of the DX-C is same the DX-A. The difference is the magnets. Inside of the second layer there are three magnets, which is made by 1600 gauss magnet. The 3 points lie in respectively Fengchi pointf¼Fengfu pointf¼Fengchi point, which can stimulate the circulation of blood. On the surface of DX-C is the material of far infrared. The net weight of the each neck traction fixer is about 250g. Characteristic of use: A) Practical and Effective: Not only can be used inside and outside the room, but also can be sued in sitting, traveling and lying. Frequent use of the product would effectively aid the prevention and treatment of cervical spondylopathy; alleviate the fatigue in neck area. B) Convenient for carrying: a handy design for carry-on easy. C) Simple operation: it is portable and adjustable of angle and strength of traction by yourselves. D) Safety: this product causes no pain, risk used and any side effect if used in accordance with the instruction given. Beijing Daxiang New Material and Technology Co.

Neck traction fixer The dx-series of neck traction fixer is a new type neck tractor as a product of health care. This neck traction device elongates and exercises the neck and decreases the pressure between the discs. Frequent usage can promote better blood circulation and stress relief, air neck traction fixer system allows for deep neck muscle relaxation. The neck traction would assist to relief the tension, neck pain, muscles spasms, stress and pressure in the neck area. It is a product that combine the traction, fix, and magnetic cure and health care, especially helpful for the mid age and old age people and computer operators and officers who will feel uncomfortable in neck area after work or after standing, sitting, or walking all day. The net weight of the neck traction fixer is about 220g. The character of the neck traction fixer:

Neck traction fixer Introduction of the neck traction fixer: The dx-series of neck traction fixer is a new type neck tractor as a product of health care. This neck traction device elongates and exercises the neck and decreases the pressure between the discs. Frequent usage can promote better blood circulation and stress relief, air neck traction fixer system allows for deep neck muscle relaxation. The neck traction would assist to relief the tension, neck pain, muscles spasms, stress and pressure in the neck area. It is a product that combine the traction, fix, and magnetic cure and health care, especially helpful for the mid age and old age people and computer operators and officers who will feel uncomfortable in neck area after work or after standing, sitting, or walking all day. The net weight of the neck traction fixer is about 220g. The character of the neck traction fixer:

EKG Electrode, GNY Chairs, Vital Sign Monitors, Mobile Surgical Light, Ophthalmic Chair and Stands, OR Surgical Table, Sterilizing Unit . Wooden crates

Spirotome The spirotome is a large core soft tissue biopsy system for the early detection and diagnosis of diseases, mainly cancer. The procedure is gently with no pain. The sample is of exquisite quality and the price per biopsy low. The procedure can be done in the operation theatre, physicians' office or elsewhere. Due to its direct frontal uptake of tissue the device is ideal for stereotactic procedures but working under ultrasound is the routine. The system works where other systems fail. The system is mri safe and conditional. Fda approval since 2006. Ce approval since 2005. One package contains one set of needles and measures 3 x 6 x 20 cm and weigths maximally 60 gram.

Suction unit Instavac premium suction unit with shock proof abs chassis. Housing: robust engineering plastic molded, shock-resistant abs. Quality approval:isi marked Capacity: -710mmhg ª 10 at 30~35 ltrs / min. Noise level:50 db a ª 3 almost whispers Pump type: noiseless rotary vane type vacuum pump Jar: autoclavable 2x2 ltrs capacity, over flow safety device, reusable or autoclavable bacterial filter, pvc or silicone tube 10 x 15 mm x 2 mtrs. Vacuum gauge: 7.50 cms (3.0 inch). 0-760mm hg (also kpa) calibration. Power: 220/230v ac, 50hz, 180 watts, 1ph. (110v on request) Good for different clinical / medical & surgical procedures. All parts coming into contact with secretion are autoclave safe. Necessary tools for maintenance / replacement and spares provided. Export packing

CE and FDA certificates.

We provide designing, supply, installation and commissioning of the hospital equipment, operation theater equipment, medical instrumentation, surgical instruments , medical , pneumatic tube system, air disinfectant unit, gases pipeline system etc.

Coramate The coramate is an automated computerized and battery operated large core soft tissue biopsy systems, mainly to be used in the early detection of breast cancer. The working range is between 8 and 12 gauge. The direct frontal uptake of the tissue sample makes this procedure extremely effective in making a complete diagnosis without any patient discomfort. The quality of the sample is exquisite. The costs per biopsy are the lowest compared to the other vacuum aspiration biopsy devices. The unique concept of rotatational cutting on a cutting helix makes this device the first choice for early diagnosis of clinical lesions, ultrasound guidance and mri guidance. The system is ce and fda approved since 2006. More info on: www.Medinvents.Com One package contains a coramate and battery charger and measures 50 x 40 x 10 cm.

Multi-parameter patient monitor Nt3a: 10.4'' lcd Nt3b: 12.1''lcd Nt3e: 8.4''lcd Nt3f:6.4'' Ecg Input: 5 wires ecg cable Lead section: lead =¦, ==, ==/ avr, avl, avf/ v Gain·+mm/mv·¼: 1/4·+1/2·+1·+2·+4 Frequency response: diagnosis 0.05 - 100hz Monitor model 0.5 - 40 hz Surgery 1.0 - 25 hz Sweep speed(mm/sec): 12.5, 25, 50 Heart rate range: 30-254 bpm Heart rate accuracy : f+ 1 % St segment deviation analysis: -0.8-+0.8mv St accuracy : f+0.02mv Non-invasive blood pressure Measurement type : adult, pediatric, neonatal Measurement range: systolicffffff 4.0 - 37.0 kpa Diastolic ff1.3 - 33.0 kpa Mean 2.6 - 35.0 kpa Accuracy : f+ 0.4 kpa or 5 % Resolution: 0.1 kpa Protection : over pressure Pules oximetry Spo2 measurement range: 0 - 100 % Resolution: 1 % Pulse measurement range:30- 254bpm Accuracy: f+ 2 % Resolution: 1 bpmTemperature Measurement range: 29 - 45 f¦ Accuracy: f+ 0.1 f¦ Resolution: 0.1 f¦ Response time: f_ 3 min.Respiration rate Measurement range: 0 - 120 bpm·+adult·¼ Accuracy: f+ 1 bpm or 5 % Resolution: 1 bpmCo2 Measurement range: 0 % - 10.0 % ·+ins co2 and et co2·¼ Accuracy: f+ 2 mm hg ·+·+ 5 %ffmeasurement value·¼ 10 % ·+·+ 5 %ffmeasurement value·¼ Response time: 180 msEnvironment -fffffffffffffffffffffopreation ffffffffffffstorage Temperature 0 .5 - 40 f¦ffffffffff -20 - 50 f¦ Relative humidity: f_ 80% fffffff_ 90% Power requirements Input: 98f+260 v ac, 50/60hz Consumption: f_ 80va About3.5-5.5kg/unit gross weight

Medical instruments Bulk sale of medical instruments 20% to 50% discount Excellent condition individually wrapped