Introduction Our company produces duct rodders has 12 years of history, we generate different diameter of duct rodders, diameter range from 3mm to 15mm length of 15mm.Duct rodders, 60m, 100m, 150m, 180m and a variety of specifications, of course also can according to the customer need to customize the length. The color of the rod is divided into white, yellow, orange, blue, black, green, red, we on the rod make m the number of markers, and can be used for the customers in the rod marker customers trademarks. We can provide a variety of duct rodders cage style, in order to meet the needs of customers in different countries. Product introduction The rod Wanqi rods are manufactured from state-of-the-art materials formulated to offer the high performance & durability demanded by our customers.The core of the rod is manufactured by the pultrusion process. This involves impregnating high strength continuous glass fiber filaments with a liquefied resin. The fibers are drawn in to a heated die where the resin matrix is cured, bonding the fibers together and allowing mechanical loads to be transmitted through the matrix and distributed amongst the fibers.The resulting pultruded rod combines both the high stiffness required to push the rod through long distances of ducting, with the flexibility to handle tight bends without damage. This inner core is then coated with a highly durable, scratch resistant polypropylene sheath which protects the core from mechanical damage.
Introduction Our company produces duct rodders has 12 years of history, we generate different diameter of duct rodders, diameter range from 3mm to 15mm length of 15mm.Duct rodders, 60m, 100m, 150m, 180m and a variety of specifications, of course also can according to the customer need to customize the length. The color of the rod is divided into white, yellow, orange, blue, black, green, red, we on the rod make m the number of markers, and can be used for the customers in the rod marker customers trademarks. We can provide a variety of duct rodders cage style, in order to meet the needs of customers in different countries. Product introduction The rod Wanqi rods are manufactured from state-of-the-art materials formulated to offer the high performance & durability demanded by our customers.The core of the rod is manufactured by the pultrusion process. This involves impregnating high strength continuous glass fiber filaments with a liquefied resin. The fibers are drawn in to a heated die where the resin matrix is cured, bonding the fibers together and allowing mechanical loads to be transmitted through the matrix and distributed amongst the fibers.The resulting pultruded rod combines both the high stiffness required to push the rod through long distances of ducting, with the flexibility to handle tight bends without damage. This inner core is then coated with a highly durable, scratch resistant polypropylene sheath which protects the core from mechanical damage.
e-glass needle mat which is a thermal and acoustic insulation mat. The raw material is e-glass textil fiber roving, diameter 9um.
Introduction Our company produces Duct Rodders has 12 years of history, we generate different diameter of Duct Rodders, diameter range from 3mm to 15mm length of 15mm.Duct Rodders, 60m, 100m, 150m, 180m and a variety of specifications, of course also can according to the customer need to customize the length. The color of the rod is divided into white, yellow, orange, blue, black, green, red, we on the rod make m the number of markers, and can be used for the customers in the rod marker customers trademarks. We can provide a variety of Duct Rodders cage style, in order to meet the needs of customers in different countries. Product introduction The rod Deli rods are manufactured from state-of-the-art materials formulated to offer the high performance & durability demanded by our customers.The core of the rod is manufactured by the pultrusion process. This involves impregnating high strength continuous glass fiber filaments with a liquefied resin. The fibers are drawn in to a heated die where the resin matrix is cured, bonding the fibers together and allowing mechanical loads to be transmitted through the matrix and distributed amongst the fibers.The resulting pultruded rod combines both the high stiffness required to push the rod through long distances of ducting, with the flexibility to handle tight bends without damage. This inner core is then coated with a highly durable, scratch resistant polypropylene sheath which protects the core from mechanical damage. 1+2 4?? 1+2 4?? The frames Frames are also a feature of the Hunter systems. a larger footprint for stability; steel brake handles that will last forever; dual rod out-feeding positions and wheels inside the frame width. The two smallest sizes feature frames with the feedout built into the handle. All frames can be laid down on either side. These are just some of the design features that will make every unit more usable and friendly for the end user. Rod selectIon Which is the right rod diameter for any given application? The rod selection is usually governed by several factors including: The size of ducting it is to be pushed through The distance the rod is to be pushed The number and tightness of bends in the ducting If the ducting is already occupied by cable When being pushed through the duct, any rod will tend to form “sine waves”, hitting the wall of the duct at certain intervals. Each time the rod comes in contact with the wall of the duct, it causes friction. The friction will build and eventually prevent the rod from being pushed any further. Small rod in large duct will make more frequent contact with the ducting; the same rod in smaller duct will make less frequent contact and therefore less friction so it can be pushed further. Large rod in small ducting is a good situation, but reduced flexibility of the rod may cause increased friction in the tighter bends.
Introduction Our company produces duct rodders has 12 years of history, we generate different diameter of duct rodders, diameter range from 3mm to 15mm length of 15mm.Duct rodders, 60m, 100m, 150m, 180m and a variety of specifications, of course also can according to the customer need to customize the length. The color of the rod is divided into white, yellow, orange, blue, black, green, red, we on the rod make m the number of markers, and can be used for the customers in the rod marker customers trademarks. We can provide a variety of duct rodders cage style, in order to meet the needs of customers in different countries. Product introduction The rod Wanqi rods are manufactured from state-of-the-art materials formulated to offer the high performance & durability demanded by our customers.The core of the rod is manufactured by the pultrusion process. This involves impregnating high strength continuous glass fiber filaments with a liquefied resin. The fibers are drawn in to a heated die where the resin matrix is cured, bonding the fibers together and allowing mechanical loads to be transmitted through the matrix and distributed amongst the fibers.The resulting pultruded rod combines both the high stiffness required to push the rod through long distances of ducting, with the flexibility to handle tight bends without damage. This inner core is then coated with a highly durable, scratch resistant polypropylene sheath which protects the core from mechanical damage.
Colorful fiberglass tube, the technology is pultrusion, so it's more beautiful. About the color, we can provide white, red, etc, it can be produced according to your request. Diameter, 500mm below, but it can be customized according to the order. About the length, we also can manufacture it according to your request. If you have any doubts, you can contact us at all times.
Hot sale fiberglass tube, the technology is roll-wrapped, so it's more durable. About the technology, we have roll-wrapped, pultrusion, pull-winding, etc. It can be used as requested. Surface finish, it can be yellow, red, etc. It can be produced according to your request. Diameter, 500mm below, but it can be customized according to the order. About the length, we also can manufacture it according to your request. If you have any doubts, you can contact us at all times
Fiberglass reinforcement (GFRP) is made of linear strands of glass fibers, which are collected in the beam reinforced with periodic profile, impregnated with a thermosetting resin binder, then exposed to heat (polymerization) and cooled. It turns a solid rod of high strength three times the strength of steel by tensile test results, and less weight 9 times with equal diameters. Our GFPR rebar is made of epoxy resin and glass fiber direct roving (E-glass). We produce it in coils of 50m, 100m, 150m and 200m or in rods (from 0,5m and up to 12m).
Glass Fiber + Resin System Process Technique: Hand lay-up, L-RTM, SMC, etc Technical Strength: 1) Concept Design 2) Material selection 3) Process determination 4) Model processing 5) Mold design 6) Reverse Engineering Main Advantages: 1) light weight and strong 2) corrosion resistant 3) insulation for heat & electric & sound 4) thermal & electric non-conductivity 5) good resistant to low temperature 6) long service life( the service is more than 20 years) 7) water proof&fire proof 8) enviroment friendliness Certificate: ISO9002, ISO14001, OHSAS18001
EAS silicone coated fiberglass fabric is made of knitted type or braided type E fiberglass and then coated with silicone rubber on the surface. It is designed to be used as a sealing material in environments that are exposed to the hazards of high heat and occasional flame or molten metal splash, slag, sparks etc.
FRP Rebar is a new kind of composite material, which is glass fiber as reinforcement material, combines with epoxy (resin) and curing agent, then through pultrusion molding process. Fiberglass imparts the strength of the rod, while resin imparts excellent corrosion resistance to harsh chemical and alkaline environments. The products are widely used in construction, transportation industry, coal mine tunnel, parking structures,half coal roadway, slope support, subway tunnel, rock surface anchoring, seawall and dam etc. Main Features Corrosion Resistance: The base materials used by the bolt are durable materials, and they are molded through the composite process. The life span is up to 100 years. High Tensile Strength: The load is approximately double that of a steel bar with the same diameter; Light Weight: The weight is only 1/4 that of a steel bar with the same diameter.Therefore, the labor intensity is greatly reduced, and the transportation cost is reduced at the same time; Anti-static: It has no electrical conductivity, and no sparks will be produced when being cut. It is particularly suitable for high gas zones. The GFRP rockbolt is a fully threaded rodmade of glass fiber and reinforced resin with filling materials such as curingagent and flame retardant, and processed by pultrusion, winding and otherprocesses. The supporting tray nut is the GFRP rockbolt. It is mainly used forthe support of coal mine rock tunnels, semi-coal rock tunnels, coal walls,surrounding rock faces, slope anchoring and other underground projects.
Glass fiber reinforced plastic (FRP) grating isa kind of glass fiber reinforced material. It is a new material which iscomposed of unsaturated polyester resin andglass fiber.It can be used for car wash house, tree grate,poultry farming, power plant, trench cover, sewage treatment plant and so on.It is corrosion resistance, flame retardant, no magnetic insulation, brightcolors, etc.We could customize different colors and sizesaccording to customers' requirements, and we can also increase the acid andalkali resistance and corrosion resistance of the products according to theactual conditions of the usage. Main Features Corrosion Resistance: Resistance to acid, alkali, salt, etc.; Light Weight: High strength, Reduce the weight of the structure; Design ability: Cutting any size us convenience, any color available; Anti-Slip: The special structure of the grating determines that it is anti-skid; Electrical Insulation: No breakdown at 10KV voltage, can be used in magnetic sensitive equipment; Anti-Aging: Service life of more than 20 years Application The FRP Grating is interwoven by glass fiber andmolded by resin pouring. The grille plate with many regular rectangular andsquare Spaces is made. It has the mechanical characteristics of bidirectional,can be widely used in petroleum, chemical electronics, electric power,electroplating, Marine exploration, sewage treatment and other industries ofwork platform, equipment platform, drilling platform, walkway, etc.
FRP pultrusion profiles are made of continuous glass fiber roving, continuous glassfiber mats and surface mats under the pultrusion molding machine's traction,and then dipped in a mold to form profiles, bars and tubes with various cross-sectional shapes and sizes. The tensile strength is higher than ordinary steel. The resin rich layer on the surface makes it have good corrosion and weather resistance, it is good choice to replace steel in corrosive and open-air environments. Main Features High Strength:Light Weight 1/4 of steel, 2/3 of aluminum. Anti-Corrosion:Resistance to acid, alkali, organic dissolvent and other gas and liquidmixture. ElectricInsulation: 10KV no voltage breakdown, no electro-magnetic behavior andelectric spark. Anti-Skid:Different process mode on surface, concave, gritted, increase friction factor. Anti-Aging:Have more than 20 years effective service life under normal outdoor workingcondition. Anti-Fatigue:Moderate flexibility reduces the workers' pressure on legs and waist EasyMaintenance: Have alternative and bright colors, non-fading, easy to clean. Application Outdooractivities: tent pole, arrow shaft, FRP I-shape beam, fishing rod, golf shaft,sail batten, skate boards, paddle shafts, slide guides; Tool:curtain rod, fence post, rail, handrail, frame for cases and bags, flag pole,oil sucker rods, bolts, stair, ladder, greenhouse structures,scaffold,portable work platforms, cooling tower, window/door frame, sign post, bridgestructure, bus bar supports, tool handles, bike flags,flag poles, floorgratings, shoe soles; Vehicle:motor top sticks, u-shaped motor stator wedges, service truck booms, snowmobiletrack stiffeners, high-end automobile components,bicycle frames, glider,microcar; Pipe: gutters, firewater/ cooling water /gas /drinkingwater/ waste water pipe; Building: roofing laminate, door surrounds, windowcanopies and dormers, chimneys, coping systems, insulators, cable conductor,cable tray, transformer air duct spacer sticks, cable support trays, etc.
Material: High-performance polyester film, unsaturated polyester resin, fiberglass roving and mat Width: No more than 1500mm Thickness: 0.6-5mm Length: 5800mm, 11800mm or customized Color: Clear, Blue, Green, Red,Opal or customized Profile:customized FPR day-lighting board is a daylighting material used with steel structure. It is mainly composed of high-performance coating, reinforced polyester and glass fiber. Among them, the upper film should play a very good anti-ultraviolet and anti-static effect. Because of its stable quality, it is well received by customers. The product can be widely used in industrial/commercial/civil building roofs and walls. Features are as follows: 1. It has the characteristics of good shatter resistance, easy cleaning, acid and alkali resistance, and easy installation. 2. The product lighting light is astigmatic, the light is soft, the light transmittance is maintained high, and most of the ultraviolet rays can be blocked 3. The product is a flammable material.When a fire occurs, it can quickly burn out the dense smoke in the room, which can reduce the casualties of the fire, and the product does not produce droplets during the combustion process, which can protect the safety of the on-site personnel 4. It maintains stable performance in the temperature range of -40 C to 120C without high temperature softening and high cold embrittlement; it can also be designed as a double-layer structure with better heat preservation effect, especially suitable for winter production in farms in severe cold areas in the north. 5. Shatter resistance, super impact resistance, can block the impact of wind, snow and hail, avoiding nail hole expansion and water leakage. 6. It has corrosion resistance, acid and alkali resistance, and is suitable for roofing of chemical workshops, such as fertilizer plants, electroplating plants, etc.
Fiberglass Insect Screen is widely used for windows screen and corridors toprevent insects from interrupting Fiberglass insect screening makes ideal material in industrial and agricultural buildings to keep away fly, mosquito and small insects or for the purpose of ventilation.
WuQiang Superstar Fiberglass is top window screen manufacturer, fiberglass window screen mesh and fiberglass window screen supplier in China with factory price. Fiberglass insect screen and fiberglass mesh is mainly product. We has formed an integrated enterprise including manufacturing, research, trading, export, etc.
Fiberglass Insect Screen Production Craft: The fiberglass insect screen is woven with high grade fiberglass monofilament coated with PVC resin. the processes involve many steps like thread spinning, coating, weaving, formation,examination,etc. Fiberglass Insect Screen Main Characteristics: Environment friendly, long services life, easy install, easy clean, durable and flexible, heavy break strength, without smell, flame resistant, customer roll size are available, keep insect & bug out let fresh air in.
Mesh: 18x16(standard),14x14,16x16, 17x19, 20x20, etc Weight: 90g-145g Color: Grey, Black, White, Green, Yellow, Brown, etc Roll Length: 20-300 meters ; Roll Width: 0.5-3.0 meters Packing: each roll packed with plastic film, and then packed with carton or according to your requirement. Quantity:A full 20ft container can hold 70,000m2-85,000m2. Time: A 20ft container can be produced within 20-25days. A40ft can be produced within 30-35days. Customer roll size, color, mesh size, packing, fiberglass windown screen insect screen can be made as require.
Mesh: 18x16(standard),14x14,16x16, 17x19, 20x20, etc Weight: 90g-145g Color: Grey, Black, White, Green, Yellow, Brown, etc Roll Length: 20-300 meters ; Roll Width: 0.5-3.0 meters Packing: each roll packed with plastic film, and then packed with carton or according to your requirement. Quantity:A full 20ft container can hold 70,000m2-85,000m2. Time: A 20ft container can be produced within 20-25days. A40ft can be produced within 30-35days. Customer roll size, color, mesh size, packing, fiberglass windown screen insect screen can be made as require.
Fiberglass mesh cloth Brief introduction Fiberglass mesh cloth is glass fiber woven fabric as substrate, through polymer emulsion coating. Thus has the good anti alkali, the flexibility as well as the latitude and longitude height anti pulling force, may be widely used in the building inside and outside wall heat preservation, waterproof, crack resistance and so on. Specifications 1. 0pening: 5mm*5 mm 4m m * 4 m M 3mm*3mm --160g 3. Each rolllen gth: 50m , 100 0r 200m 4. Width: lm-2m 5. Color: white(standard)blue, green, orange and other colors 6. Packaging: each roll blister packaging, four volumes, or six volumes of a carton, a 40-foot container can be mounted 80, 000-150, 000 square meters.
