Product Description NGYM-I Rail Waist Grinding Machine Rail waist grinding machine is suitable for grinding works before railway laying, subway maintenance welding and gluing insulated joints construction. This work is one of the heavy workload jobs in the rail welding operation. In the past, it was mainly carried out by hand-held electric grinder or angle grinder, it has led to high labor intensity, low operation efficiency and slow working speed, poor grinding surface quality, serious environmental pollution etc. The rail waist grinding machine is suitable for 50kg/m-75kg/mrails. Specification Model NGYM-I Material Stainless Steel Dimensions (L x W x H) (mm) 1120*430 *780mm Engine petrol engine Max output power 4.0kw/3600rpm Grinding wheel spindle speed 3600rpm Grinding wheel diameter �¦ 100-230mm Grinding wheel size 2-124*106*34.5/18 G-A20 P 7B-45m/s Machine weight 57kg
Product Description Lithium battery powered Rail bolt wrench machine (model: LJ-LDB171X) is composed of host, control system, battery system and rail traveling part. The utility model has the advantages of compact structure, light weight, flexible assembly and disassembly, convenient use and no exhaust emission. It can be transported separately, which is convenient for single person to carry on site. The weight of the separated part is less than 15kg. It is applicable to the laying, maintenance and emergency rescue of railway, and is specialized in various railway bolt operations Specification Model NGM-4.4II Type Rail Profile Grinding Machine Material Stainless Steel Dimensions (L x W x H) (mm) 1480*470*810mm Engine Two-stroke petrol engine/4.4KW Main shaft rpm 4670r/min Bolt screwing flat grinding wheel 125*65*M20 Grinding head angle of inclination 90° Grinding head stroke 45 mm Total weight 61kg
Product Description NGM-5.1 Rail Profile Grinding Machine This machine is mainly used for forming and grinding operations of railway rail welding joints and rail surface repairs. The development and application of the CNC feed unit realizes the intelligent control of the grinding wheel feed. Significantly improve the profiling accuracy and polishing efficiency. BENIFITS Angle of the grinding head is set using an adjustment wheel, lowering/raising of the grinding stone is electrically contlled Equipped with spark protection device Equipped with electric control system prevents over grinding by limiting the lowering of the grinding stone Grinds the whole head of rail in one single operator, no need to turn the machine or to handle it Specification Model NGM-5.1 Type Rail Profile Grinding Machine Material Stainless Steel Dimensions (L x W x H) (mm) 1500 * 450 * 750 mm Engine HONDA GX270 Power 5.1 kW Grinding wheel specifications 125x65 mm Feeding accuracy 0.1 mm Turning angle of grinding stone ±90° Spindle revolution 4100r/min Grinding stone feeding stroke 42 mm Profile wheel span 1000 mm Weight 100 kg Weight of supporting rod 14 kg
Product Description NGM-4.8I Digital Display Rail Grinding Machine NGM-4.8I digital display rail grinding machine is suitable for grinding 43kg/m-75kg/m rail weld, uneven joint, rail side fat edge, rail surface welding repair and other parts. With a multi-purpose, automation and intelligent set as one of the high-precision rail grinding machine. Specification Model NGM-4.8I Type Rail Grinding Machine Material Stainless Steel Dimensions (L x W x H) (mm) 1500 * 450 * 750 mm Internal combustion engine GX200, > 3600r/min, 4.8kW Grinding Wheel Specification 125*65*M20 Grinding Wheel Linear Velocity > 35m/s Spindle rotation 4500r/min Inclination angle of grinding wheel +90 degrees Accuracy of inclination angle 0.5 degree, 1.0 degree, 2.0 degree, 3.0 degree, 4.0 degree, 5.0 degree Grinding wheel stroke 45 mm Grinding wheel feed accuracy 0.05 mm, 0.1 mm, 0.15 mm, 0.2 mm, 0.25 mm, 0.3 mm Profile wheelbase 1000mm Weight 90kg
Product Description NGM-6.0 Rail Profile Grinder This machine is powered by the M165 two-stroke petrol engine imported from Spain. It is a small machine used for forming and grinding the rail head welding joints and surface repairs. It is suitable for rails of 43~75kg/m. The special diaphragm carburetor make sure the engine does not stall after turning 90�°, and the output torque is stable without power attenuation, thus ensuring the precision of rail grinding. Specification Model NGM-6.0 Type Rail Profile Grinder Material Stainless Steel Dimensions (L x W x H) (mm) 1410*500*850mm Engine 2 stroke petrol engine M165 Power 6.0kW Grinding stone speed 3900r/min Grinding stone inclination 0~90° Grinding stone feeding stroke 42mm Grinding stone specification 150x55x70mm Fuel tank volume 4.5L Profile wheel span 1000mm Feed adjustment accuracy 0.125mm Weight 60kg
Product Description Lithium Battery Powered Rail Bolt Wrench Lithium battery powered Rail bolt wrench machine (model: LJ-LDB171X) is composed of host, control system, battery system and rail traveling part. The utility model has the advantages of compact structure, light weight, flexible assembly and disassembly, convenient use and no exhaust emission. It can be transported separately, which is convenient for single person to carry on site. The weight of the separated part is less than 15kg. It is applicable to the laying, maintenance and emergency rescue of railway, and is specialized in various railway bolt operations Specification Model LJ-LDB1701X Type Lithium Battery Torque Wrench Material Stainless Steel Dimensions (L x W x H) (mm) 1100*700*450mm Type Battery powered rail bolt wrench Rated voltage (DCV) 24-48 Max. torque 3000 N.m Motor speed (RPM) 0-3000 optional Impact frequency (BPM) 0-5000 optional Battery pack capacity (ah) 24-48 Operating temperature range (-40 ~ 50 â??) Operating range m6-m30 Torque control adjustable and controllable Weight 22kg
Product Description Lithium Battery Rail Impact Wrench Vertical double lithium electric torque wrench (model: U-LD81901) is a railway digital display torque wrench with vertical operation and double lithium electric protection technology, and its working torque is>3000N m. The torque value is adjustable and controllable, which is specially used for various railway bolt operations. The vertical double lithium electric torque wrench (model:LJ - LDB1901) is composed of a control lever, a motor, and a reducer. It adopts the unique ergonomic flat impact principle, which makes the machine more safe, labor-saving, and efficient. Its unique overall waterproof design ensures the all-weather construction needs. Torque regulation and compensation can make torque control more accurate to meet construction requirements. Specification Model LJ-LD81901 Type Battery Impact Wrench Material Stainless Steel Dimensions (L x W x H) (mm) 600*400*250mm Rated voltage (DCV) 18-36 Max. torque 3000 N.m Motor speed (RPM) 0-3000 optional Impact frequency (BPM) 0-5000 optional Battery pack capacity (ah) 18-36 Operating temperature range (-40 ~ 50 ) Torque control adjustable and controllable
API 6A Slab Gate Valve Yulin Machinery This high-performance two-way flat API 6A Slab Gate Valve gate valve is ideal for high pressure critical service applications of 3000 psi to 15000 psi on wellheads, Christmas trees and manifolds. Product Description API 6A Slab Gate Valve have PFFA Series and PFF series. Details as below: PFFA Series Gate valve Full bore design eliminates efficiently pressure drop and vortex, eliminates washing by solids in fluid. Mental-to-mental seal is used between bonnet and body, gate and seat body and seat The surface of gate andseat is weld overlay with hard alloy. which has feature of corrosion resistance and washing resistance. The bonnet and stem designed with back seal, can replace stem sealing under pressure One side of bonnet is designed with sealant injection in order to supply sealant and improve seal and lubrication performance of gate and seat. Can complete with different pneumatic (hydraulic) actuator upon user s requirements Working Pressure: 2000PSI-20000PSI Nominal Bore: 1-13/16-9"(46mm-230mm) Working Medium: oil natural gas mud and gas ,containing hasco Working Temperature:-46C-121'C(Class LU) Material Class: AABBccDDEEFFHH Specification level: PSL1-4 Performance Requirement: PR1-2
Product Description NQG5III Rail Cutting Machine NQG5III Internal combustion rail cutting machine is suitable for cutting rails of 43kg/m75kg/m . The quality of cutting section meets the requirement of railway industrial standards. Its a necessary tool used in railway overhaul, maintenance and rush repairing operation. It has features of fast cutting speed, high utilization rate of thin grinding wheel, high quality of cutting section, easy operation, easy movement, safe use and wide application range etc. Specification Model NQG5III Type Rail Cutting Machine Material Stainless Steel Dimensions (L x W x H) (mm) 670*600*510mm Internal combustion engine HONDA GX200 Engine Power 4.8kW Engine Speed 3600r / min Thin grinding wheel (spindle) Spindle speed 3030r / min Specification (linear velocity) 400 * 32 * 4 (70m /s) Cutting time 60kg / m rail, 120S Number of usage 50kg /m rail, use 4 times 60kg /m rail, use 3 times Machine weight 39.5kg
Product Description NQG-5.8 Abrasive Rail Saw NQG-5.8 lightweight abrasive rail saw is a railway maintenance tool. It not only cuts rails with high speed and high quality, but also has low wear cutting discs. It is locked by rail clamps. It has a simple structure, light weight, safety and easy movement. It is suitable for maintenance, repair of broken rails of seamless tracks, and cutting of steel rails in long rail welding factories. Specification Model NQG-5.8 Type Rail Cutting Machine Material Stainless Steel Dimensions (L x W x H) (mm) 850*480*500mm Engine Single-cylinder, air-cooling two-stroke petrol engine (imported from Sweden K1270R)5.8 kW Cutting disc form Double- layer reinforced wire mesh Linear speed of cutting disc 100 m/s Rated RPM 4500 r/min Specification of cutting disc �?355x�?25.4 x3.8mm Cutting accuracy Vertical deviation of notch and railâ?¤0.30mm Deviation of bidirectional cutting interfacesâ?¤0. 35mm Cutting time â?¤110s( cut off 60kg/m rail) Fuel tank capacity 1.25 L Weight 22kg
Product Description NQG-5.8 Abrasive Rail Saw NQG-5.8 lightweight abrasive rail saw is a railway maintenance tool. It not only cuts rails with high speed and high quality, but also has low wear cutting discs. It is locked by rail clamps. It has a simple structure, light weight, safety and easy movement. It is suitable for maintenance, repair of broken rails of seamless tracks, and cutting of steel rails in long rail welding factories. Specification Model NQG-5.8 Type Rail Cutting Machine Material Stainless Steel Dimensions (L x W x H) (mm) 850*480*500mm Engine Single-cylinder, air-cooling two-stroke petrol engine (imported from Sweden K1270R)5.8 kW Cutting disc form Double- layer reinforced wire mesh Linear speed of cutting disc 100 m/s Rated RPM â?¥4500 r/min Specification of cutting disc �?355x�?25.4 x3.8mm Cutting accuracy Vertical deviation of notch and railâ?¤0.30mm Deviation of bidirectional cutting interfacesâ?¤0. 35mm Cutting time â?¤110s( cut off 60kg/m rail) Fuel tank capacity 1.25 L Weight 22kg
Product Description NQG-5.8 Abrasive Rail Saw NQG-5.8 lightweight abrasive rail saw is a railway maintenance tool. It not only cuts rails with high speed and high quality, but also has low wear cutting discs. It is locked by rail clamps. It has a simple structure, light weight, safety and easy movement. It is suitable for maintenance, repair of broken rails of seamless tracks, and cutting of steel rails in long rail welding factories. Specification Model NQG-5.8 Type Rail Cutting Machine Material Stainless Steel Dimensions (L x W x H) (mm) 850*480*500mm Engine Single-cylinder, air-cooling two-stroke petrol engine (imported from Sweden K1270R)5.8 kW Cutting disc form Double- layer reinforced wire mesh Linear speed of cutting disc 100 m/s Rated RPM 4500 r/min Specification of cutting disc 355x25.4 x3.8mm Cutting accuracy Vertical deviation of notch and rail0.30mm Deviation of bidirectional cutting interfaces0. 35mm Cutting time 110s( cut off 60kg/m rail) Fuel tank capacity 1.25 L Weight 22kg
Product Description NQG-5.8 Abrasive Rail Saw NQG-5.8 lightweight abrasive rail saw is a railway maintenance tool. It not only cuts rails with high speed and high quality, but also has low wear cutting discs. It is locked by rail clamps. It has a simple structure, light weight, safety and easy movement. It is suitable for maintenance, repair of broken rails of seamless tracks, and cutting of steel rails in long rail welding factories. Specification Model NQG-5.8 Type Rail Cutting Machine Material Stainless Steel Dimensions (L x W x H) (mm) 850*480*500mm Engine Single-cylinder, air-cooling two-stroke petrol engine (imported from Sweden K1270R)5.8 kW Cutting disc form Double- layer reinforced wire mesh Linear speed of cutting disc 100 m/s Rated RPM 4500 r/min Specification of cutting disc 355x25.4 x3.8mm Cutting accuracy Vertical deviation of notch and rail0.30mm Deviation of bidirectional cutting interfaces0. 35mm Cutting time 110s( cut off 60kg/m rail) Fuel tank capacity 1.25 L Weight 22kg
Product Description NQG5.1 Rail Cutting Machine To furnish the varying desires of our customers, we are immersed in offering a world class consignment of Abrasive Rail Cutter. Abrasive Rail Cutter is suitable for cutting upto 60 Kg. 110 uts Rails. the machine has features of fast cutting speed, high utilization rate of cutting discs, high quality of cutting profile, convenient operation, easy motion and safe use. the machine comprises of petrol driven engine, integrated with a cutting unit fitted with an abrasive disc. Specification Model NQG-5.1 Type Rail Cutting Machine Material Stainless Steel Dimensions (L x W x H) (mm) 800*560*500mm Engine GX270 petrol engine 5.1KW Specification of cutting disc 400*32 *4mm Cutting disc no. of revolutions 3320 r/min Linear speed of cutting disc 70m/s Cutting accuracy Verticality0. 4mm, flatness0.3mm Cutting time 2 min ( cut off 60kg/m rail) Weight 50kg
Hydraulic Railway Track Jack It is new type equipment that is used on the railway line's maintenance and repairing. The most important feature of this machine is that is a dual-purposed machine what meet the needs of the lifting work of the line, as well satisfy lining operations. Hydraulic Track Lifting and Lining Tool is mainly composed of: power part, operating mechanism, body, running gear, landing gear, hook rail device, starting device, dialing device, lower guiding device, lower track, etc. Hydraulic Track Lifting and Lining Tool is specially used for the railway track maintenance. It is used for the track lifting and lining. It has features with simple and compact structure, simple and flexible operation, easy maintenance,fast and reliable performance when go up and down the track Specification Model YBD-245A Type Hydraulic Railway Track Material Stainless Steel Rated lifing force/ Rated lining force(kN) 245/145 Maximm lifting Quantity/ lining quantity(mm) 135/95 Weight(kg) 23
The A-type automatic layer cage system gets its name from its frame, which looks like the letter A. Its trapezoidal frame ensures stability. But it typically only has 3 to 4 tiers due to this shape. The Livi A-type layer chicken cage system is equipped with automatic systems for feeding, drinking, manure removal, egg collection, and environmental control. These layer chicken cages allow farmers to improve their egg production and maintain a profitable and sustainable poultry business. Brief Details Material International Q235 steel. Anti-corrosion Treatment Process Hot-dip Galvanized, Aluminum-Zinc Alloy Lifespan 15 20 Years Certificate ISO9001, ISO14001, OHSAS18001, CE, SONCAP, PVOC Production Lead Time Depending on the order quantity. Normally about 10 days for 20ft container, 15 days for a 40ft container. Supply Ability 10000 Set/Month Packing Method Normal export packing. 20ft / 40ft container. Payment Method T/T, L/C at sight Trading Method EXW, FOB, CFR, CIF
The sludge dewatering machine produced by Apoaqua follows the principles of force and water in the same direction, thin layer dewatering, appropriate pressure and extended dehydration path in its dehydration mechanism. It solves the technical problems of previous generations of sludge dewatering machines, such as easy clogging, inability to process low-concentration wastewater sludge and oily sludge, high energy consumption, and complex operation, and achieves the goal of efficient and energy-saving dewatering. Apoaqua sludge dewatering system includes: fully automatic control cabinet, flocculation conditioning tank, sludge concentration and dewatering body and liquid collecting tank. It can realize efficient flocculation and continuously complete wastewater sludge concentration and squeezing dewatering under fully automatic operation, and finally return or discharge the collected filtrate. In order to meet the special needs of users in related industries, Apoaqua's sludge dewatering machine has the advantages of low-speed operation, self-cleaning, no clogging and low energy consumption. We continuously tailor targeted industry-specific solutions for users in various industries, including sludge dewatering equipment for industries such as petrochemical, papermaking, starch protein, chemical pharmaceuticals, blue algae, inorganic materials and pectin processing.
Hand Held Profile Wheels are compatible with any polisher or grinder featuring a 5/8"-11 threaded spindle. For optimal performance, we recommend using a center-fed water polisher operating at 3500 RPM, with a maximum allowable RPM of 4000. The nylon guide on the top of the wheel glides smoothly along the surface, while the rotating contact bearing ensures precise depth control. Utilizing the latest "Vacuum Brazed Technology," our profile wheels deliver powerful grinding action and extended durability without losing the shape of the profile, outperforming many sintered profilers on the market. Hand Held Profile Wheels from Leading Diamond Tools make it easy for operators, even those with little or no machining experience, to create perfect edge profiles such as Ogee, Bullnose, Bevel, or Roundover. These versatile wheels are suitable for use on materials including granite, engineered stone, porcelain, marble, and limestone. While they can also be used on concrete, it's important to note that their lifespan will be shorter due to concrete's abrasive nature.
SNUOK Portable lithium brushless cordless constant temperature heat gun perfect for industrial heat shrink film blower electronic repair, 3 seconds fast heating, while configured with double heating wire, better heat gathering effect. The temperature reaches 280�°C-550�°C, to meet the different product requirements. Cordless Freedom: Enjoy the freedom to work anywhere without being tethered to a power outlet. Constant Temperature Control: Ensure uniform heat application with precision, eliminating the risk of overheating or damaging materials. Rapid Heating: Get to work quickly with rapid heating capabilities, minimizing downtime and increasing productivity. Ergonomic Design: Lightweight and ergonomically designed for comfortable handling during extended use. Versatile Applications: Ideal for shrink wrapping, paint stripping, soldering, and more in various industries. Upgrade your heat application tasks with the 21V Brushless Cordless Constant Temperature Heat Gun, and experience unparalleled efficiency and precision in every job.
Product Description NGM-5.1 Rail Profile Grinding Machine This machine is mainly used for forming and grinding operations of railway rail welding joints and rail surface repairs. The development and application of the CNC feed unit realizes the intelligent control of the grinding wheel feed. Significantly improve the profiling accuracy and polishing efficiency. BENIFITS Angle of the grinding head is set using an adjustment wheel, lowering/raising of the grinding stone is electrically contlled Equipped with spark protection device Equipped with electric control system prevents over grinding by limiting the lowering of the grinding stone Grinds the whole head of rail in one single operator, no need to turn the machine or to handle it Specification Model NGM-5.1 Type Rail Profile Grinding Machine Material Stainless Steel Dimensions (L x W x H) (mm) 1500 * 450 * 750 mm Engine HONDA GX270 Power 5.1 kW Grinding wheel specifications 125x65 mm Feeding accuracy 0.1 mm Turning angle of grinding stone ±90° Spindle revolution 4100r/min Grinding stone feeding stroke 42 mm Profile wheel span 1000 mm Weight 100 kg Weight of supporting rod 14 kg
