Pro user 2 stroke generator with electronic ignition and recoil start:- A versatile generator for general use. Perfect for low watt power tools, lighting, caravanning and camping. This compact generator weighs 18kgs to help show its quality and durability yet still light enough and easy to carry. Being a 2 stroke engine means you have to mix the petrol with 2 stroke oil. Ordinary unleaded petrol you get from any petrol station and 2 stroke either from motorbike shops, garden machinery centres or good motor factors. The mixture is 50 to 1. That's 50 parts petrol and 1 part of 2 stroke oil. So the measurement is for 1000ml (1 litre) of petrol you have to mix 20ml of 2 stroke oil. Specification • 850w(max) output • single phase • 2 stroke easy start engine • 240 volt ac • recoil cord starting • on/off switch • re-set button • ac output socket uk socket • carrying handle • 4 litre fuel tank • 2 stroke oil measuring cap • noise level 65db @ 7 metres • 13 amp socket • 5.8 hours approx running time • dimensions: 390mm l x 330mm w x 330mm h • weight: 18kgs 4-litre fuel tank. Weighs 18kg
Petrol Generator 4 Stroke 3 Phase & 1 Phase 415v, 240v & 12 Volt:- Compact, Efficient and Versatile with the Following Specification This generator in dry form with no oil or fuel weighs nearly 45 kgs to help substantiate its quality and durability. These are used for camping, building sites, marinas, on boats, motor homes, caravans, back up for houses, the list is endless. With a running time of between 9 to 11 hours from a full tank makes this a very efficient way to produce electricity. Please note that the three phase and single phase cannot be run at the same. It can only be 415v or 240v and not both. To change phases simply move the change over switch to the correct voltage. It is to be used for domestic purposes only. Yes it can be used commercially but has no commercial warranty. Specification: • Brushed Single Phase & Three Phase • 50Hz • Air Cooled Single Cylinder OHV 4/Stroke Engine • Rated Power 3Kva on 3 phase • Rated Power 1Kva on 1 phase 2.8 • 16 amp 240 Volt AC socket (blue socket round 3 pin) • 16 amp 380 Volt AC socket (red socket round 6 pin) • 12 Volt DC connection @ 8.6amp • Power Factor 1.0 • Displacement 196cc • Speed 3000 rpm • Maximum Output 6.5 hp • Recoil Starting System • Power: 7.8 amp @ 380v, 4.2 amp @ 240v • 15 Litre Fuel Tank Capacity • Working Time Per15 Litres 11 to 9 hours • Dimensions: 595 x 425 x 435mm approx • Weight 45kgs approx • Noise (7 meters away) < 67 (db) (0 meters) < 95(db) weighs 45 kgs
we have received Oil and Gas orders from some serious clients in different countries, they want to buy the following commodities: EN590 PP10: 650 MT every month one-year extendable Crude Oil: 4,000,000 Barrel. every month one-year. Jet Fuel AI:4,000,000 Barrel. every month one-year. LNG 7 million ton every month, one-year extendable So, kindly send me prices of the above commodities with contract procedure if possible:
D2 is a refinery abbreviation for Gasoil. It is the second distillate from the crude, and can be used without reformers and additives. So, the first engines used D2 as fuel before petrol cars as we know them today was invented This chemical compound holds the highest amount of energy components and lubricant properties in one mixture and offers the best fuel performance available on the market today. Most scientists agree that grade2 diesel fuel will protect injection pumps, seals, and other important engine parts. D2 is the current standard for all automotive diesel fuel sold in the Union member states and other countries
Jet fuel diesel
CHEMICAL CHARACTERISTICS: Free Fatty Acid: 0.1 - 0.15% max Peroxide Value: 1.0 - 2.0 meq/kg max Color (Lovibond): 12.0 - 15.0 Yellow / 1.5 - 2.0 Red Iodine Value (Wijs): 100 - 122 Moisture: 0.05 %max AOM: 20 hrs min Cold Test: 5.5 - 12 hrs min Refractive Index @ 40oC: 1.460 - 1.467 Specific Gravity @ 25oC: 0.914 - 0.920 Saponification Value: 182 - 193 Smoke Point: 460 - 530oF Flash Point: 610 - 640oF Fire Point: 670 - 690oF FATTY ACID PROPERTIES: C16:0 Palmitic 3.0 - 5.0% C16:1 Palmitoleic 0.2 - 0.3% C18:0 Stearic 1.0 - 3.0% C18:1 Oleic 56.0 - 76.0% C18:2 Linoleic 10.0 - 24.0% C18:3 Linolenic 4.0 - 13.0% C22:1 Erucic 0.2 - 1.8% FATTY ACID DISTRIBUTION: Saturated 4.3 - 7.4% Monosaturated 54.4 - 65.0% Polyunsaturated 27.2 - 37.0% CRUDE CANOLA/RAPESEED OIL SPECIFICATIONS: Free Fatty Acids (As OLEIC) Molecular Weight 282-Basis: BASE 1.00% MAX. 1.25% Moisture and Volatile Matter: 0.20% MAX. Density (Specific Weight) at 25 C and 4 C Min. 0.9180 Max. 0.9225 Flash Point: MORE THAN 121 (250 F) Saponification value Min. 188 Max. 198 Impurities (Insoluble in Petrol Ether): 0.10% MAX. Unsaponifiables Matter (test as per N.O.P.A.): Max. 1.50 pct. Sediment (Gardner Break Test): 0.10% MAX. Lecithin (expressed as Phosphorous): 0.02% MAX. Color Index (MG Iodine) (Lovibond Cell 1 inch): 50-60 Yellow and 5-6 Red. Refractive index at 20 degrees C: 1.505 to 1.512 Halphen reaction Negative Density (at 15�° C): 900-930kg/m3 Flash Point: 220�°C ( closed up, Pensky-Martens method) Calorific value: 35.000 kJ/kg Kinematic viscosity: 38 mm2/3 (40�°C) Coke deposit: 0.4 mass-% (Conradson procedure) Iodine value: 100-120g/100g Sulphur content: 20mg/kg Neutralizations number: 2,0mg KOH/g Phosphorus content: 15mg/kg Water content: 75mg/kg Ash: 0.01 mass%
Acp Aluminum-plastic composite mosaic Product details Color card Dimension: Panel thickness: 1mm to 10mm Aluminum thickness: 0.03 to 0.60mm Width: 1, 220, 1, 250, 1, 350, and 1500mm Processing: Surface: pe or pvdf coating with various color Core: fireproof plastic by our formula/unbreakable core/ antistatic core Rear: ordinary coating for protection/mill finished Performance: Easy to installation and maintenance Excellent sound absorption and weather resistance Extremely strong agglutination, macromolecule film Excellent regidity and impact resistance Acid-resistant and alkali-resistant Excellent fire-retardant performance Usage: Commercial or residential interior and exterior decoration Ceiling, floor, cabinet, bathroom, kitchen, bedroom decoration, tunnel, subway, billboards, exhibitions, saloons, petrol dump, car, boat, vessel, airport decoration and so on. Panel thickness: 1mm to 10mm Aluminum thickness: 0.03 to 0.60mm Width: 1, 220, 1, 250, 1, 350, and 1500mm
Automotive Diesel Oil 50ppm Petrol ULP 93 & 95 Biofuel Jet A1 Aviation Gasoline Liquid Petroleum Gas Illuminating Paraffin Marine Fuel Oil Marine Gas Oil Polar Diesel/Arctic Marine Diesel
Automotive Lubricants Engineering Lubricants Aviation lubricants Engine Oil Hydraulic Oils Hydraulic Oil Heavy Oil
Wesgard anti-electrocution welding safety devices, are all electronic no moving or wearing parts, maintenance free with a two year warranty.Simply connect wesgard to the welding terminals a.C. Or d.C. Transformer, rectifier, petrol diesel or motor driven, and you are safe against electric shock or electocution while welding in wet or damp conditions , such as mines refineries, shipyards etc. Compulsary in most countries, for trade enquiries please contact wesgard international factory direct south africa.
Coal
we are looking for serious buyers BITUMEN GRADE 60/90 TRIAL QUANTITY 30,000 METRIC TONS CONTRACT QUANTITY: 200,000 METRIC TONS (MONTHLY) CIF - PRICE: PER METRIC TON (GROSS USD$:130.00 / NET USD$:120.00) COMMISSION: USD$:10.00 PER MT (BUYER SIDE/SELLER SIDE (50%/50%) TERMS OF PAYMENT SBLC-MT760/DLC MT700 OR 2% PRODUCT VALUE VIA MT103 PERFORMANCE BOND 2% PB AGAINST MT760 SBLC, APPLICABLE TO CONTRACT ONLY INSPECTION: SGS, CCIC, SAYBOLT, INTERTEK OR SIMILAR BY SELLER SPECIFICATION: INTERNATIONAL EXPORT STANDARD
PRODUCT AVIATION KEROSENE JET A1 TRIAL QUANTITY 2 MILLON BBL PER MONTH PARTIAL SHIPMENT ALLOWED 1 MILLION BARRELS ; 1ST TRIAL SHIPMENT, FOLLOWED BY 12 MONTH SPA- CONTRACT, 2 (TWO) MILLION BARRELS PER MONTH DESTINATION PORT REQUESTED TO BE NOMINATED BY THE BUYER PRICE AT REQUEST OF ABOUT2 MILLION BARRELS PER MONTH: PLATTS MINUS 8 (EIGHT) USD GROSS 6 (SIX) USD NET PER BARREL from the platts to which the destination port is connected. 2 USD COMMISSIONS 1 USD SELLER SIDE, CLOSED: 1 USD BUYER SIDE, OPEN GENERAL PARAMETERS PRODUCT OFFERED ON FOB PROCEDURE PAYMENT : RWA FROM BUYER BANK, DOCUMETRY LETTER OF CREDIT (DLC) or STAND BY LETTER OF CREDIT (SBLC) AND AFTER SGS REPORT AT DISCHARGE PORT WIRE TRANSFER MT103 MAXIMUM 24 HOUR PERFORMANCE BOND %2 PERFORMANCE BOND