Disposable Trays Suppliers and Manufacturers

General Features Size: 17.5 x 9.5cm Colour: Blue and white Materials: polypropylene, non-woven fabric Packaging: 50 masks per box Safety Features CE certified In accordance with the European standard EN14683:2005 BFE â?¥98% The middle polypropylene layer filters airborne particulate matter Water-absorbent inner layer to alleviate the moisture build-up Water-repellent outer layer to prevent inhalation of large liquid droplets Non-splash resistant Comfort Features Breathing resistance & 29.4 Pa/cm2 The soft material makes the mask-wearing more comfortable A non-irritating inner layer Adjustable nose clip for a better fit Elastic ear loops for a more secure mask adjustment 3 layers Our 3-ply surgical face masks have a multi-ply design to better prevent inhalation of non-oily airborne pollutants. The blue outer layer and white inner layer are made out of non-woven materials, with a polypropylene filtration layer in the middle. The non-woven layers are designed to provide a comfortable fit, with the protective melt-blown middle layer serving as the barrier. Bacteria filter efficiency (BFE) Our Type II medical masks effectively resist bacterial penetration with a rating of at least 98% in accordance with the European standard. Therefore, you can go about your business, knowing that you are 98 â?? 99.9% protected from inhaling airborne pollutants. 100% compliant with regulations (CE, EN14683:2005) Our surgical masks are 100% CE certified. They are also in accordance with the European standard EN14683:2005. Please note that if you need reassurance regarding the certification of our products, we are willing to send you the copies of the relevant documents upon request! High breathability The combination of a soft lightweight material and comparatively low breathing resistance allows for greater breathability. This also means the fabric is more absorbent, which serves to lessen the moisture build-up. Disposable In order for your Type II mask to effectively protect you from the pollutants you should wear it for a maximum of four to five hours. Please do not share your 3-ply face mask with other people. If your mask becomes damaged or dirty, throw it away. Please follow the World Health Organisation's (WHO) guidelines for correctly putting the mask on and off.

General Features of our Face Shields Easy to clean and sterilise Eco-friendly Anti-fog Large 43cm/17 protective surface Why our Face Shields More comfortable to wear than a face mask Lightweight Easy to assemble Easy to Clean and Sterilise Our Face shields were made with non-porous plastic which makes it easy to clean and sterilise. Being exceptionally durable as well, our shields� can be used many times if properly handled and regularly disinfected. Anti-fog The elastic band that goes over your head is attached to another one which holds your shield in place. This leaves enough space between your head and the shield, preventing the hot air from becoming trapped between your face and the protective plastic. Unlike other face shields that usually use foam, our face shields were especially designed to be anti-fog by� maximising breathability and visibility. Eco-friendly The plastic used to make our face shields is� 100% recyclable. Vannin Healthcare was specifically focused on a combination of recyclability and breathability to protect you in more than one ways, both long- and short-term. A lightweight alternative to a face mask, our shields are� easy to assemble and comfortable.

General Features Size Universal Colour White Packaging 20 masks per box Optional design Cupped or folded Safety Features CEcertified FDAcleared In accordance with the US standard NIOSH42CFR84 Filtration efficacy of PM25 99 Filtration efficacy of PM03 95 Disposable Comfort Features The soft material makes the maskwearing more comfortable Adjustable nose clip for a better fit Two elastic ear loops for a more secure maskadjustment High fit effectiveness Fits more tightly against the face cupped respirators Conveniently portable folded respirators Filtration efficacy Our filtering face piece respirators can be used for respiratory protection against various nonoily airborne contaminants  It is extremely effective 9599 against tiny particulate matter of less than 03 and 25 microns in diameter PM03 and PM25 respectively among which are many infectious agents For the purpose of protecting yourself from influenza viruses SARS avian flu coronavirus etc respirator masks were recommended as part of the PPE by the World Health Organization WHO 100 compliant with regulations CE FDA NIOSH42C FR84 Our N95 respirators have been confirmed to meet all of the performance requirements set by the US standard NIOSH42C FR84 They are also completely CEcertified and FDAcleared Please note that if you need reassurance regarding the certification of our products we are willing to send you the copies of the relevant documents upon request Nonreusable NR In order for your N95 particulate respirator to effectively protect you from the particulate matter you should wear it for a maximum of four to five hours Please do not share your mask with other people If your respirator mask becomes damaged or dirty throw it away Please follow our instructions for proper user seal checks before each use Cupped Design Moulded or cupped masks were made with your physiognomy in mind They were designed to better fit your face firmly preventing leakage However they might be impractical if you want to carry them in your pocket If youre looking for a more portable alternative check out our folded mask design Remember if your mask gets damaged its best to just throw it away User Seal Check Before entering a possibly contaminated area you need to properly put on your filtering facepiece To do this you need to Take the mask in one hand so that the nose clip is turned upwards Place the bottom of the mask against your chin while using your other hand to pull both straps over your head The bottom strap should go below your ears over your neck The top strap should go high on your head above the ears Adjust the mask carefully against your face not allowing for any gaps between the mask and your face Adjust the nose clip with both hands to ensure the nose clip is firmly tightened Pinching it with just one hand is not advised as it might affect the tightness of the mask Finally check if you completed all of the steps correctly by putting both of your hands over the mask so as to not affect it

General Features Size Universal Colour White Packaging 20 masks per box Optional design Cupped or folded Optional feature Valved or nonvalved Safety Features CEcertified FDAcleared In accordance with the European standard EN 1492001A12009 Filtration efficacy of PM25 99 Filtration efficacy of PM03 99 Disposable Inward leakage lt2 Comfort Features The soft material makes the maskwearing more comfortable Adjustable nose clip for a better fit Two elastic headbands for a more secure maskadjustment High fit effectiveness Less moisture and heat buildup valved respirators More lightweight and easier to carry nonvalved respirators Filtration efficacy Our filtering face piece respirators can be used for respiratory protection against variousnonoily airborne contaminants  It is extremely effective 99 against tiny particulate matter of less than 03 and 25 microns in diameter PM03 and PM25 respectively among which are many infectious agents For the purpose of protecting yourself from influenza viruses SARS avian flu coronavirus etc respirator masks were recommended as part of the PPE by the World Health Organization WHO 100 compliant with regulations CE FDA EN 1492001A12009 Our FFP3 respirators have been confirmed to meet all of the performance requirements set by the European Standard EN 1492001A12009 They are also completely CEcertified and FDAcleared Please note that if you need reassurance regarding the certification of our products we are willing to send you the copies of the relevant documents upon request Nonreusable NR In order for your FFP3 particulate respirator to effectively protect you from the particulate matter you should wear it for a maximum of four to five hours Please do not share your mask with other people If your respirator mask becomes damaged or dirty throw it away Please follow our instructions for proper user seal checks before each use Decide for yourself Vannin Healthcare Global is one of the rare suppliers who let you choose your FFP3 masks design at no additional cost If youre indifferent about the design of your respirator or just want to surprise your future self feel free to skip this step Choose the design Cupped or Folded Moulded or cupped masks were made with your physiognomy in mind They were designed to better fit your face firmly preventing leakage However they might be impractical if you want to carry them in your pocket Remember if your mask gets damaged its best to just throw it away Folded masks on the other hand you can easily carry around in your pocket or your purse Convenient as they are they might be the right choice to have on you at all times Just store them in a clean plastic bag and youre good to go But be careful to put them on tightly and not leave any gaps between your face and the mask I want the folded FFP3 respirator mask The purpose of the valve on respiratory protective masks is to lessen the breathing resistance which is higher compared to other nonrespirator masksfor safety reasons Th

General Features Size Universal Colour White Packaging 20 masks per box Safety Features CEcertified FDAcleared In accordance with the European standard EN 1492001A12009 Filtration efficacy of PM25 99 Filtration efficacy of PM03 94 Disposable Inward leakage lt8 Comfort Features The soft material makes the maskwearing more comfortable Adjustable nose clip for a better fit Two elastic headbands for a more secure maskadjustment High fit effectiveness Less moisture and heat buildup valved respirators More lightweight and easier to carry nonvalved respirators Filtration efficacy Our filtering face piece respirators can be used for respiratory protection against various nonoily airborne contaminants  They are extremely effective 9499 against tiny particulate matter of less than 03 and 25 microns in diameter PM03 and PM25 respectively among which are many infectious agents For the purpose of protecting yourself from influenza viruses SARS avian flu coronavirus etc respirator masks were recommended as part of the PPE by the World Health Organization WHO 100 compliant with regulations CE FDA EN 1492001A12009 Our FFP2 respirators have been confirmed to meet all of the performance requirements set by the European Standard EN 1492001A12009 They are also completely CEcertified and FDAcleared Please note that if you need reassurance regarding the certification of our products we are willing to send you the copies of the relevant documents upon request Nonreusable NR In order for your FFP2 particulate respirator to effectively protect you from the particulate matter you should wear it for a maximum of four to five hours Please do not share your mask with other people If your respirator mask becomes damaged or dirty throw it away Please follow our instructions for proper user seal checks before each use Folded Design You can easily carry around our folded masks in your pocket or your purse Convenient as they are they might be the right choice to have on you at all times Just store them in a clean plastic bag and youre good to go But be careful to put them on tightly and not leave any gaps between your face and the mask If youre looking for a design that is less likely to have leakage check out our cupped design masks Valved The purpose of the valve on respiratory protective masks is to lessen the breathing resistance which is higher compared to other nonrespirator masks for safety reasons The wearing of your respiratory protective mask becomes more comfortable as there is less moisture buildup  However if you suspect you have been infected wearing an unvalved respirator is advised Otherwise you risk exposing other people to virus particles nbsp Before entering a possibly contaminated area you need to properly put on your filtering facepiece To do this you need to Take the mask in one hand so that the nose clip is turned upwards Place the bottom of the mask against your chin while using your other hand to pull both straps over your head The botto

General Features Size: 17.5 x 9.5cm Colour: Blue and white Materials: polypropylene, non-woven fabric Packaging: 50 masks per box Safety Features CEâ??certified In accordance with the European standard EN14683:2005 BFE â?¥98% The middle polypropylene layer filters airborne particulate matter Water-absorbent inner layer to alleviate the moisture build-up Water-repellent outer layer to prevent inhalation of even smaller liquid droplets Splash-resistant ( >120 mmHg) Comfort Features Breathing resistance <49 Pa/cm2 The soft material makes the mask-wearing more comfortable A non-irritating inner layer Adjustable nose clip for a better fit Elastic ear loops for a more secure mask adjustment 3 layers Our 3-ply Type II R face masks have a multi-ply design to better prevent inhalation of non-oily airborne pollutants and penetration of bodily fluids. The blue outer layer and white inner layer are made out of non-woven materials, with a polypropylene filtration layer in the middle. The non-woven layers are designed to provide a comfortable fit, with the protective melt-blown middle layer serving as the barrier. Bacteria filter efficiency (BFE) Our Type II R medical masks effectively resist bacterial penetration with a rating of at least 98% in accordance with the European standard. Therefore, you can go about your business, knowing that you are 98- 99.9% protected from inhaling airborne pollutants or hazardous splatter. 100% compliant with regulations (CE, EN14683:2005) Our 3-ply surgical masks are 100% CE certified. They are also in accordance with the European standard EN14683:2005. Please note that if you need reassurance regarding the certification of our products, we are willing to send you the copies of the relevant documents upon request! Splash resistance The unique feature of Type II R surgical masks is the liquid-repellent layer offering additional protection against particulate matter and infectious splashes. The greater protective efficiency of the masks adequately makes up for the higher breathing resistance (<49 Pa/cm2). Disposable In order for your Type II R mask to effectively protect you from the pollutants you should wear it for a maximum of four to five hours. Please do not share your 3-ply face mask with other people. If your mask becomes damaged or dirty, throw it away. Please follow the World Health Organisation's (WHO) guidelines for correctly putting the mask on and off.

General Features Nearinstant measuring 1 second Can memorize up to 32 measurements Can measure in C or F Can measure Body or Surface temperature Safety Features Easy to use and read Lightweight Adjustable auto power off Adjustable sound Nearinstant Measuring Our thermometers were specifically designed for large crowds where time is of the essence To ensure maximum efficiency and prevent unnecessary delays consider using our digital thermometers to measure temperatures in a span of a single second Contactless and easy to clean Keep potential contaminants at arms length with our Noncontact Infrared Thermometers Measure a persons temperature with your arm straight and while keeping a distance of 1 to 10cm between you for minimal invasiveness However if your thermometer does accidentally touch another persons skin you can easily sanitise it with some disinfectant wipes The thermometers nonporous material prevents infectious agents from latching onto the surface which further facilitates the cleaning process 100 compliant with regulations CEcertified FDAcleared RoHScompliant The Vannin Medical IR Thermometers are fully CEcertified being in compliance with the regulations specified by the Medical Device Directive 9342EEC The FDA and RoHS have formally cleared our Thermometers as consistently meeting their set of requirements Please note that if you need reassurance regarding the certification of our products we are willing to send you the copies of the relevant documents upon request Product model ZLKIRT101 Care4U TF600 QQZM Measurement display resolution 01C 01F 01C 01F Measuring range 32C43 C 95 F1094 F 32C429C 896F1092F Measuring distance 1 10 cm 1 10 cm Operating ambient temperature range 10C40C 50F104F 16C35C 608F95F Operating ambient humidity 80RH RH85 Storage temperature range 25C55C 13F131F 25C55C 13F131F Response time 1 second 1 second Power DC3V DC3V Power supply two AAA batteries two AAA batteries Dimensions LengthxWidthxHeight 116mmx55mmx170mm 101mm x 40mm x143mm Weight 125g without batteries 120g3g RoHS compliant YES NO

Sunkissed Orange 3-Ply 1/4 Fold Luncheon Napkin â?? 500/Case Not only is this buffet napkin excellent at spicing up your table or catering tray, its size makes it just right for lunchboxes or buffet lines. This Creative Converting napkin features a handsome embossed pattern and is perfect for your hors d\'oeuvres table, lunchboxes, or putting the finishing touches on your themed school dance! The 3-ply design makes them stronger than their single- or double-ply counterparts, which means more protection against spills and messes. This napkin is disposable for easy clean-up, but they are sturdy enough for wiping messy hands. Colorful, versatile, and disposable for easy clean-up, what more could a party planner ask for? Additional information Weight 6.85 lbs Type Luncheon Napkins Material Paper Recycled Materials Quantity 500/case Features No PFAS Added Folded Length 6 1/2 Inches Unfolded Length 12 15/16 Inches Folded Width 6 1/2 Inches Unfolded Width 12 3/4 Inches