Petroalliance diesel fuel is the second distillate of crude oil. Ultra-low sulfur grades of D2, such as GOST 305-82, with a reduce sulfur content to a maximum of 0.02 percent and reduce sulfur pollution emissions. Diesel fuel is often used in diesel engines. Diesel engines or compression ignition engines, rely on the temperature increase of compression, rather than on spark plugs, to achieve reliable ignition timing and combustion efficiency. As a result of their inherently higher compression ratio for a given power output, diesel engines are more fuel efficient than spark ignition engines. Compared with spark ignition automotive engines, diesel engines weigh more, generate more vibration and produce greater particulate or soot emissions. Diesel engines can also produce a particularly carcinogenic type of hydrocarbon pollutant known as polycyclic aromatic hydrocarbons (PAHs), which are generated during the diesel combustion process. The cetane index is a measure of the autoignition quality of a diesel fuel, with higher numbers meaning that the engine is easier to start in cold weather. Our products are exported to Asia, Europe, America, and the CIS
We ANA COMPANY are direct authorized suppliers of petroleum products such as Class 54 and Class A1 jet fuel, D2 Diesel, Virgin D6, LCO, AGO, BITUMEN, JP54, D6, MAZUT, LNG, LPG, ESPO, EN590, JETA1, JETFUEL, UREA 46%, GASOLINE, GAS-OIL and other petroleum products. CIF, FOB, TTO and TTV ORIGIN ; KAZAKHSTAN, OMAN, KYRGISTAN. basis you or your buyer are interested and have accepted the terms, you should send an official ICPO as soon as possible to close the deal. We also have a reputable tank warehouse available to buyers and sellers worldwide to provide warehousing services for all types of petroleum products and FOB Spot transactions. Our warehouse terminals are available in Houston, the port of Rotterdam in the Netherlands and enable the safe transport of goods to any port in the world. Please contact us via the channels below for further information.
Minimum Quantity: 100,000 Metric Tons @ Trial lift Maximum Quantity: 400,000 Metric Tons @ Monthly Supply Price: Gross $340.00 USD/$310 .00 USD Net on FOB Price: Gross $360.00 USD/$340 .00 USD Net on CIF Commission: Buyer's Side $5.00 USD / Seller's Side $5.00 USD
LNG NATURAL GAS Petroleum Derivatives
24x Fast Gas Cream Charger Now With An Improved Capacity For A Total Of 615g Nitrous Oxide! PRODUCT SPECIFICATIONS FAST GAS CREAM CHARGER Cylinder made from first-rate stainless steel N2O (615g â?? E942 food grade) Totally disposable and Eco-friendly Adheres to every European rule and regulation Pressure tested at 165 bar Free nozzle with your purchase
Now With An Improved Capacity For A Total Of 615g Nitrous Oxide! Product Specifications Fast Gas Cream Charger Cylinder made from first-rate stainless steel N2O (615g â?? E942 food grade) Totally disposable and eco-friendly Adheres to every European rule and regulation Pressure tested at 165 bar Free nozzle with your purchase How does it work? When you order you will receive your track and trace by email or sms. If you need any help with your order feel free to email
Cream Deluxe Gold is the newest addition to our exciting E942 catalogue. With Gold, we create the future of E942 in a streamlined, feather weight aluminium bottle. Not only does this brand-new wrapping make the product among the lightest on the market for its volume, but the aluminium also keeps the gas and the cylinder super clean in the prevention of rust and other unwanted oxidation processes. Never worry about quality-loss on your gas, or reduction of the canister over time. With Cream Deluxe Gold your E942 is kept clean and safe for years to come. Technical product information Featherweight, with 50% less weight than before. 100% aluminum casing for ultra-strong resistance against corrosion and rust. Pure food-grade E942 purity tested at 99.9%. Zero substance taste or smell Strong and high-quality German craftsmanship
Used Engines HS Code 840820 PRICE = US$1,800/PIECE CIF ORIGIN: THAILAND PACKAGE: TONS MIN ORDER:5 PIECES DESCRIPTION There are several types of engines used in automobiles. The car engine types are generally described based on two factors: the fuel type and engine layout/number of cylinders (cylinder configuration. One of the most common types of engines is petrol and diesel engines. But that's a generic way to describe a car engine. SPECIFICATION General Engine Specifications Basic Engine Specifications I-6, 4-Stroke-Cycle-Diesel Displacement .......................................................................... 12.88 L (in3) Rated engine speed .................................................................... 2300 rpm High idle speed ........................................................................... 2530 rpm Low idle speed (programmable) ................................................... 550 rpm Peak torque ......................................................... 3,355 N m @ 1200 rpm Bore ....................................................................................... 135 mm (in) Stroke ...................................................................................... 150 mm (in) Aspiration .................................. Supercharged-Turbocharged-Aftercooled Governor ............................................................................................. ECU Fuel system type .................................................................. Common Rail Length ........................................................................... 1960 mm (77.1 in) Length to flywheel housing ........................................... 1476 mm (58.1 in) Width ............................................................................. 1195 mm (47.0 in) Height ............................................................................ 1117 mm (43.9 in) Weight, net dry (approx.) ................................................1672 kg (3686 lb) Rotation (from flywheel end) .......................................... Counterclockwise Flywheel housing/flywheel .................................................... SAE No. 01M Flywheel teeth ....................................................................................... 155 Tolerances Power ............................................................................................... +/- 3% Exhaust Stack Temperature ............................................................ +/- 8% Inlet Air Flow .................................................................................... +/- 5% Intake Manifold Pressure ............................................................... +/- 10% Exhaust Flow ................................................................................... +/- 6% Specific Fuel Consumption .............................................................. +/- 3% Heat Rejection ................................
* Quantity MIN 50,000MT x 12 months * Origin: German Origin Specifications: The products are in accordance with the specifications requested by The Buyer or presented by The Seller. * Payment: By MT103/760 * Price/Commissions: Final price to Buyer is the Gross, including all commissions. * Payment is then made by Seller, who carries out all commissions transfers. *Contract: 12 Months with possible rollovers. * Inspection: SGS or similar * CIF SBLC PROCEDURE - Summary of our procurement process:- 1. Buyer issue an RFP (Per attached template -w- specification sheet) 2. We issue a commercial offer with all relevant tacit data 3. Buyer returns signed commercial offer in conjunction with a Banker Signed RWA letter (Verbiage will be attached in the commercial offer) 4. Seller issues the Sales & Purchase Agreement 5. The Contract is formalized and lodged with respective bankers 6. Buyer's Banker issues a Pre-Advice MT799 7 Seller issues the Price Lock Notice (a discount is set on this day per the Platts Assessment of the day) 8. Buyer Banker issues the collateral (MT760) 9. Seller's Banker issues 2% Performance Bond 10. Seller charters the vessel/barges 11 Seller berths the vessel/barges 12. Seller loads the vessel/barges 13. Seller issues Product & Shipping Documentation (Digitally AND via courier) 14. Vessel/Barge departs for destination
Products - German Origin - Product List With Pricing Details Refined/produced In Germany, Not Re-Documented Category A (AVIATION KEROSENE) 1.Jet Fuel A-1 2.Jet Fuel TS-1 Category B (D2/EN590) 1.Diesel 10 PPM (Gasoil 0.001%S) 2.Diesel 50 PPM (Gasoil 0.005%S) 3.Diesel 500 PPM (Gasoil 0.05%S) 4.Diesel 1000 PPM (Gasoil 0.1%S) 5.Diesel 2500 PPM (Gasoil 0.25%S) Category C (PETROL) 1.Unleaded Gasoline RON 92 2.Unleaded Gasoline RON 95 3.Unleaded Gasoline RON 97 Category D (D6 RESIDUAL FUEL) 1.Fuel Oil 3.5% 180 CST 2.Fuel Oil 3.5% 380 CST
Refined/produced In Germany, Not Re-documented - Min. Qty Is 50,000 Mt For All Products Except Jet Fuel With Min. Qty Of 2m Bbl And Min Contract Period Is 12 Months. Ship To Ship Transfer (Sts) Procurement Process 1.1. The Seller Issues A Commercial Offer. - The Commercial Offer Exhibits Information Such As Specific Prices, Volume, Load/discharge Ports, Delivery Timeline, Product Specifications, Etc. 1.2. The Buyer Formalizes And Returns The Commercial Offer In Conjunction With A Banker Signed Ready Willing And Able (Rwa) Letter Stating, The Banker Shall Issue A Collateral Instrument On Behalf Of The Buyer. 1.3. The Seller Issues An Authorization To Verify (Atv), Which Is Transmitted Between Bankers. -the Atv Is To Validate/confirm The Sellers: A) Liquidity. B) Hydrocarbon Trading Experience. 2. Sales Agreement 2.1. The Seller Issues The Sales & Purchase Agreement. -the Sales & Purchase Agreement Exhibits Information Such As Price, Index Discount, Volume, Load/discharge Ports, Delivery Timeline, Product Specifications, Banking Coordinates, And Other Tacit Data. -the Delivery Timeline Is Contingent On The Volume, Load/discharge Ports, And Vessel Availability. 3. Formalization/banking 3.1. The Buyer Formalizes And Submits The Sales & Purchase Agreement Within (3) Business Days. 3.2. The Sales & Purchase Agreement Is Lodged With The Buyer's And The Seller's Bank. 3.3. The Buyer's Banker Transmits A Pre-advice Via Swift Mt799. 3.4. The Buyer's Banker Transmits The Collateral Instrument Via Swift Mt760. 3.5. The Seller's Banker Issues A 2% Performance Bond. 4. Loading/documentation 4.1. Subsequent To The Validation Of The Collateral Instrument, The Seller Loads The Vessel (At Own Expense) And Issues The Product & Delivery Documentation. -product & Delivery Documentations Are Submitted Digitally And Via Courier When Created. Documentation Comprises Of, But Is Not Limited To, Charter Party Agreement, Vessel Questionnaire 88, Vessel/product Insurance Policy (Lloyds), Commitment To Supply/commercial Invoice, Statement Of Product Availability/certificate Of Origin, Bill Of Lading/cargo Manifest, Ullage Report, Certificate Of Quality, Notice Of Readiness/eta To Destination, Etc. -the Buyer May Track And/or Communicate With The Vessel At Their Convenience. 5. Delivery/injection 5.1. Per Standard Shipping Protocols, The Shipper Contacts The Buyer Within A 48-hour Arrival Date/time. 5.2. The Seller Issues The Authorization To Board (Atb) And The Dip Test Authorization (Dta). 5.3. The Buyer Executes An Mt103 Wire Transfer Subsequent To The Quality/quantity Inspection And In Accordance To The Final Invoice. 5.4. The Seller Transfers The Certificate Of Ownership (Title) Subsequent To The Receipt Of Payment. 5.5. Injection Process Commences. [fuel Is Injected Into The Buyer's Vessel(S)]
Min. Qty is 50,000 MT for all products except Jet Fuel with Min. Qty of 2M BBL and Min Contract Period is 12 months. FOB GERMANY: VTO (Vessel TAKE OVER) PROCUREMENT PROCESS 1. REQUEST 1.1. The Buyer Issues A Letter Of Interest Or The Request For Product Application. - The Letter Of Interest Or The Request For Product Application Shall Consist Of Product Name, Volume, Discharge/retrieval Port, Specification(s), Collateral Instrument Issuing Bank Name, Company Information, Etc. 2. Commercial Offer 2.1. The Seller Issues A Commercial Offer. -The Commercial Offer Exhibits Information Such As Specific Prices, Volume, Load/discharge Ports, Delivery Timeline, Product Specifications, Etc. 2.2. The Buyer Formalizes And Returns The Commercial Offer In Conjunction With A Banker Signed Ready Willing And Able (rwa) Letter Stating, The Banker Shall Issue A Collateral Instrument On Behalf Of The Buyer. 3. Sales Agreement 3.1. The Seller Issues The Sales & Purchase Agreement. -The Sales & Purchase Agreement Exhibits Information Such As Price, Index Discount, Volume, Load/discharge Ports, Delivery Timeline, Product Specifications, Banking Coordinates, And Other Tacit Data. -The Delivery Timeline Is Contingent On The Volume, Load/discharge Ports, And Vessel Availability. 4. Formalization/banking 4.1. The Buyer Formalizes And Submits The Sales & Purchase Agreement Within (3) Business Days. 4.2. The Sales & Purchase Agreement Is Lodged With The Buyer's And The Seller's Bank. 4.3. The Buyer's Banker Transmits A Pre-advice Via Swift MT799. 4.4. The Buyer's Banker Transmits The Collateral Instrument Via Swift MT760. 4.5. The Seller's Banker Issues A 2% Performance Bond. 5. Loading/documentation 5.1. Subsequent To The Validation Of The Collateral Instrument, The Sellerloads The VESSEL (At Own Expense) And Issues The Product & Delivery Documentation. -Product & Delivery Documentations Are Submitted Digitally And Via Courier When Created. Documentation Comprises Of, But Not Limited To; Charter Party Agreement, Vessel Questionnaire 88, Vessel/product Insurance Policy (lloyds), Commitment To Supply/commercial Invoice, Statement Of Product Availability/certificate Of Origin, Bill Of Lading/cargo Manifest, Ullage Report, Certificate Of Quality, Notice Of Readiness/eta To Destination, Etc. -The Buyer May Track And/or Communicate With The Vessel At Their Convenience. 6. Delivery/discharge 6.1. The Seller Issues The Authorization To Board (ATB) And The Dip Test Authorization (DTA). 6.2. The Buyer Executes An Mt103 Wire Transfer Within 24 Hours Subsequent To The Quality/quantity Inspection (optional) And In Accordance With The Final Invoice. 6.3. The Seller Transfers The Certificate Of Ownership (title) Subsequent To The Receipt Of Payment. 6.4. The Buyer Takes Over The Vessel. 6.5. Vessel Departs
CIF PROCEDURE: BRENT PLATT DISCOUNT: US$8.00 Gross: US$4.00 Net: BELOW BRENT PLATT PRICE. US$4.00 Commission [US$2.00 for Buyer Agents & US$2.00 for Seller Agents - Closed] Buyer sends Letter of Intent [LOI] addressed to the Seller. Seller and Buyer sign and seal Sales/Purchase Agreement and copies sent to both parties bankers, the electronically signed copy considered legally binding and enforceable in international arbitration laws. Buyer's Corresponding bank via MT199 Pre-advice Seller's financier's bank and states its readiness, willingness and ability to swift an operative MT760 SBLC to seller's bank. Also request the seller's bank to confirm to it via MT199 its readiness, willingness and ability to receive MT760 SBLC and swift 2% performance bond (PB) to it. Seller's bank shall confirm via MT199 Pre-advice to Buyer's bank its readiness, willingness and ability to receive MT760 SBLC and swift 2% performance bond (PB) to Buyer's bank. Buyer's Bank shall swift an operative MT760 SBLC for total cargo to Seller financier's bank in Seller financier's acceptable Verbiage
CIF Procurement Process - Min. Qty is 50,000 MT for all products except Jet Fuel with Min. Qty of 2M BBL and Min Contract Period is 12 months. 1.1. The Seller Issues A Commercial Offer. - The Commercial Offer Exhibits Information Such As Specific Prices, Volume, Load/discharge Ports, Delivery Timeline, Product Specifications, Etc. 1.2. The Buyer Formalizes And Returns The Commercial Offer In Conjunction With A Banker Signed Ready Willing And Able (Rwa) Letter Stating To Issue A Collateral Instrument On Behalf Of The Buyer. 2. Sales Agreement 2.1. The Seller Issues The Sales & Purchase Agreement. - The Sales & Purchase Agreement Exhibits Information Such As Price, Index Discount, Volume, Load/discharge Ports, Delivery Timeline, Product Specifications, Banking Coordinates, And Other Tacit Data. - The Delivery Timeline Is Contingent On The Volume, Load/discharge Ports, And Vessel Availability. 3. Formalization/banking 3.1. The Buyer Formalizes And Submits The Sales & Purchase Agreement Within (3) Business Days. 3.2. The Sales & Purchase Agreement Is Lodged With The Buyers And The Sellers Bank. 3.3. The Buyers Banker Transmits A Pre-advice Via Swift Mt799. 3.4. The Buyer's Banker Transmits The Collateral Instrument Via Swift Mt760. 3.5. The Seller's Banker Issues A 2% Performance Bond. 3.6. Within 7 Days Of Verification Of The Collateral Instrument, The Seller Issues A Specially Curated Insurance Policy From Llyods Of London For 110% Of The Value. 4. Loading/documentation 4.1. Subsequent To The Validation Of The Collateral Instrument, The Seller Loads The Vessel (At Own Expense) And Issues The Product & Delivery Documentation. Product & Delivery Documentations Are Submitted Digitally And Via Courier When Created. Documentation Comprises Of, But Not Limited To: 1. Charter Party Agreement 2. Vessel Questionnaire 88 3. Vessel/product Insurance Policy (Lloyds) 4. Commitment To Supply 5. Commercial Invoice 6. Statement Of Product Availability 7. Certificate Of Origin 8. Bill Of Lading 9. Cargo Manifest 10. Ullage Report 11. Certificate Of Quality(Sgs At Origin) And Notice Of Readiness 12. Eta To Destination, Etc. The Buyer May Track And/or Communicate With The Vessel At Their Convenience. 5. Delivery/discharge 5.1. Per Standard Shipping Protocols, The Shipper Contacts The Buyer And Target Harbormaster Within A 48-hour Arrival Date/time. 5.2. The Seller Issues The Authorization To Board (Atb) And The Dip Test Authorization (Dta). 5.3. Customs Will Accompany The Buyer Per Local Rules. 5.4. The Buyer Executes An Mt103 Wire Transfer Subsequent To The Quality/quantity Inspection And In Accordance To The Final Invoice. 5.5. The Seller Transfers The Certificate Of Ownership (Title) Subsequent To The Receipt Of Payment. 5.6. Shore Tanks Are Injected Per The Harbormasters Directives.
* Quantity MIN 1,000,000 Barrels x 12 months * Origin: Russian Federation Specifications: Standard Export Quality. * Payment: By MT103/760 * Price/Commissions: Final price to Buyer is the Gross, including all commissions. Commissions * Payment is then made by Seller, who carries out all commissions transfers. * Contract: 12 Months with possible rollovers. * Inspection: SGS or similar * CIF DLC or SBLC PROCEDURE 1. Buyer issues ICPO, company registration, I.D. and Top World Bank redacted Bank Statement or equivalent 2. Seller issues Sales and Purchase Agreement (SPA). 3. Buyer signs and returns SPA. 4. Buyer's Bank issues a RWA letter to guarantee to issue an instrument on behalf of the Buyer within three working days after receiving the following PPOP. 5. Seller issues PPOP to Buyer including the following: A. Copy of license to export issued by the Department of the Ministry of Energy. B. Copy of approval to export issued by the Department of Ministry of Justice. C. Copy of statement of availability of the product. D. Copy of the refinery commitment to produce the product. E. Copy of contract to transport the product to port F. Copy of the port storage agreement G. Copy of the charter party agreements to transport the product to the discharge port. H. Tank Storage Receipt (TSR) I. Q & Q by Current SGS report. 6. Buyer's bank issues operative Letter of Credit DLC MT 700 or SBLC MT-760 to Seller's fiduciary Bank account. 7. Seller issues 2% Performance Bond to Buyers bank. 8. Shipment Commences 9. On getting to Buyer's port of discharge, the Buyer's inspection team board the vessel and perform an inspection. Buyer sends SGS report to Seller. 10. Seller provides shipping document and a master commercial invoice to Buyer, within 3 banking days, Buyer makes the payment in full via MT 103/TT to Seller's Bank account.
* Quantity : MIN 50,000MT x 12 months * Origin: Russian Federation Specifications: Standard Export Quality. * Payment: By MT103/760 * Price/Commissions: Final price to Buyer is the Gross, including all commissions. Commissions * payment is then made by Seller, who carries out all commissions transfers. * Contract: 12 Months with possible rollovers. * Inspection: SGS or similar CIF DLC or SBLC PROCEDURE 1. Buyer issues ICPO, company registration, I.D. and Top World Bank redacted Bank Statement or equivalent 2. Seller issues Sales and Purchase Agreement (SPA). 3. Buyer signs and returns SPA. 4. Buyer's Bank issues a RWA letter to guarantee to issue an instrument on behalf of the Buyer within three working days after receiving the following PPOP. 5. Seller issues PPOP to Buyer including the following: A. Copy of license to export issued by the Department of the Ministry of Energy. B. Copy of approval to export issued by the Department of Ministry of Justice. C. Copy of statement of availability of the product. D. Copy of the refinery commitment to produce the product. E. Copy of contract to transport the product to port F. Copy of the port storage agreement G. Copy of the charter party agreements to transport the product to the discharge port. H. Tank Storage Receipt (TSR) I. Q & Q by Current SGS report. 6. Buyers bank issues operative Letter of Credit DLC MT 700 or SBLC MT-760 to Sellers fiduciary Bank account. 7. Seller issues 2% Performance Bond to Buyers bank. 8. Shipment Commences 9. On getting to Buyer's port of discharge, the Buyer's inspection team board the vessel and perform an inspection. Buyer sends SGS report to Seller. 10. Seller provides shipping document and a master commercial invoice to Buyer, within 3 banking days, Buyer makes the payment in full via MT 103/TT to Seller's Bank account.
* Quantity MIN 1,000,000 Barrels x 12 months with R/E * Origin: Russian Federation Specifications: Standard Export Quality. * Payment: By MT103/760 * Price/Commissions: Final price to Buyer is the Gross, including all commissions. Commissions * Payment is then made by Seller, who carries out all commissions transfers. *Contract: 12 Months with possible rollovers. * Inspection: SGS or similar * CIF DLC or SBLC PROCEDURE 1. Buyer issues ICPO, company registration, I.D. and Top World Bank redacted Bank Statement or equivalent 2. Seller issues Sales and Purchase Agreement (SPA). 3. Buyer signs and returns SPA. 4. Buyer's Bank issues a RWA letter to guarantee to issue an instrument on behalf of the Buyer within three working days after receiving the following PPOP. 5. Seller issues PPOP to Buyer including the following: A. Copy of license to export issued by the Department of the Ministry of Energy. B. Copy of approval to export issued by the Department of Ministry of Justice. C. Copy of statement of availability of the product. D. Copy of the refinery commitment to produce the product. E. Copy of contract to transport the product to port F. Copy of the port storage agreement G. Copy of the charter party agreements to transport the product to the discharge port. H. Tank Storage Receipt (TSR) I. Q & Q by Current SGS report. 6. Buyer's bank issues operative Letter of Credit DLC MT 700 or SBLC MT-760 to Seller's fiduciary Bank account. 7. Seller issues 2% Performance Bond to Buyers bank. 8. Shipment Commences 9. On getting to Buyer's port of discharge, the Buyer's inspection team board the vessel and perform an inspection. Buyer sends SGS report to Seller. 10. Seller provides shipping document and a master commercial invoice to Buyer, within 3 banking days, Buyer makes the payment in full via MT 103/TT to Seller's Bank account.
* Quantity MIN 1,000,000 Barrels x 12 months * Origin: Russian Federation Specifications: Standard Export Quality. * Payment: By MT103/760 * Price/Commissions: Final price to Buyer is the Gross, including all commissions. Commissions * Payment is then made by Seller, who carries out all commissions transfers. Contract: 12 Months with possible rollovers. Inspection: SGS or similar * CIF DLC or SBLC PROCEDURE 1. Buyer issues ICPO, company registration, I.D. and Top World Bank redacted Bank Statement or equivalent 2. Seller issues Sales and Purchase Agreement (SPA). 3. Buyer signs and returns SPA. 4. Buyer's Bank issues a RWA letter to guarantee to issue an instrument on behalf of the Buyer within three working days after receiving the following PPOP. 5. Seller issues PPOP to Buyer including the following: A. Copy of license to export issued by the Department of the Ministry of Energy. B. Copy of approval to export issued by the Department of Ministry of Justice. C. Copy of statement of availability of the product. D. Copy of the refinery commitment to produce the product. E. Copy of contract to transport the product to port F. Copy of the port storage agreement G. Copy of the charter party agreements to transport the product to the discharge port. H. Tank Storage Receipt (TSR) I. Q & Q by Current SGS report. 6. Buyer's bank issues operative Letter of Credit DLC MT 700 or SBLC MT-760 to Seller's fiduciary Bank account. 7. Seller issues 2% Performance Bond to Buyers bank. 8. Shipment Commences 9. On getting to Buyer's port of discharge, the Buyer's inspection team board the vessel and perform an inspection. Buyer sends SGS report to Seller. 10. Seller provides shipping document and a master commercial invoice to Buyer, within 3 banking days, Buyer makes the payment in full via MT 103/TT to Seller's Bank account.