Interior Doors Made & Pinus offers Long Life, Strength and Beauty doors. â?¢ Durability is guaranteed by the use of carefully selected tempered wood components and a highly extensive controlled procedure of the dryness process. â?¢ The ideal strength of the door is guaranteed by a combination of skill and high level of quality control exercised in all doors of the joinery process where the wood controlled oven, dry, sharp cutting, well glued, glued and smoothly polished, so that, to have a single door, therefore, ready. â?¢ As a result, you receive a product that stands out in its design, modern and creative, that it will give you a perfect combination of beauty and functional capacity. See the standard collection of internal doors: Indoor transparent pine Indoor Knotty Pine Wood species Elliottis pine is the main use of soft wood to create exclusive doors from the Made & Pinus standard collection. All wood components are made from selected fully tempered solid pine wood. However, any other kind of softwood or hardwood can be considered to satisfy the customer's requirements. We will be happy to inform us of your thoughts. Do not hesitate to contact us by sending an email. Construction Mortise & Tenon, glued joint with pin The dowel construction is preferred to create the standard Made & Pinus collection doors. Draw frame makes the difference to strengthen the door joints. All door joints are well made, tight and with an excellent smooth finish. Engineering components are used in the transparent pine doors. finish the appearance of the doors is free of cracks, cracks, knots full of dead and blue stains. All doors are flat and free of twist and well sanded, ready for painting or varnishing. The door surfaces are cleaned of dust before packing one by one in a well-sealed, rolled polyethylene bag. Elliottis Pine Wooden Doors Specifications The thickness can be 35 and / or 40 mm. The moisture content is 6% to 12% at the time of manufacture. Our work processes are carried out according to the specific requirements of the client, using modern and cutting-edge equipment and tools. In this case, drawings are required before quotation. Shipping delivery Typically, a 40-foot cargo container will fit around 1,000 doors, considering 67 doors per pallet, not allowing free doors on top. For the 20-foot container, 405 to 500 ports can be loaded. Obviously, it depends on the specifications of the wide doors and the quantities of each standard. In some cases, the doors are exported on pallets containing only 30 doors. The goods are transported through the port of Itajai-SC, about 300 kilometers away from our factory. Alternatively, S�£o Francisco do Sul-SC can be used as a secondary door. This allows us to have a reliable and fast delivery service for all importing countries, always meeting the agreed standards.
We do all the measurements. The degree of density according to your request. Specifications: * laminate or non-laminate * The density of block *The blocks moisture content * The length of the blocks with the tolerance + / - * The height of the blocks Made & Pinus
Products - Plasticized broom handles (1) Material: Eucalyptus Wood (2) selectable size: length: 600mm ~ 2000mm; Diameter: 18mm ~ 50mm. Normal size: Standard 110 * 2.2 cm, 110 * 2.5 cm; 120 * 2.2 cm, 120 * 2.5 cm, 120 * 2.8 cm; 150 * 2.8CM, 180 * 2.8CM; Note: We work with all types of measures and diameters. Note 1: PP or plastic material, as requested by the buyer. * Weight 200g, 230g, 300g, 360g, 400g, 480g, etc. * Packing 1pcs / pp bag, 50pcs per carton normally * Carton size 55 * 37 * 35cm / 55 * 37 * 40cm * Smooth polished 2 or 3 times / varnished 2 or 3 times * Colors Many models with many colors you can choose --- or Custom Design * Plastic cap More than 30 types of cap for you to choose * Sample for free, but freight cost customer's responsibility.
Material description ( Promotion from April to July year 2020 ) Pinus Taeda Wood Dome end,Polish, with Italian thread Screw 1.200 cm x 23 mm 1.200 cm x 23.5 mm KD - 10 % until 12 %
Material description Pinus Taeda Wood Dome end,Polish, with Italian thread Screw 1.400 cm x 23 mm 1.400 cm x 23.5mm Broom handles for # Snow # Straw # Mop # Squeegee # Garden # Construction # Paintings # And others by order With accessories at customer's request KD - 10 % until 12 %
Coffee from Brazil Typical descriptions fine roast, strictly soft, fine cup. *TYPE NY 2 SCREEN 17/18 RIGID AND SOFT, FINE CUP *NY TYPE 2/3 SCREEN 17/18 RIGID, GOOD CUP *NY TYPE 3/4 SCREEN 14/15/16 RIGID AND SOFT CUP * NY Tipo NY 4/5 Peneira 14/15/16 Strict Soft Good Cup 20 'container or 40 'container
We are trading company that work supplying teak wood to worldwide. Our product have Origin from Brazil. We can supply Logs. Logs are classified in accordance to their grade, girth and length. Logs are measured in the Metric System and their volume calculated by the Geometric formula for the cylinder. Sales abroad obey to a minimum volume of 24m3, equivalent to a 40â?? container load. Sales inside the country start at 12m3, which is equivalent to a three axle truck load. To reduce freight costs some clients from abroad prefer to purchase roughly squared logs. We have Boules also. Boule is a through and through sawn log. Boules are sold according to the volume of the original log. Boules offer the following advantages towards logs: They do not require large machinery to be converted into components. Boules are shipped pre-dried, thereby offering timber of better quality, a substantial weight reduction and less drying time at destination.
1) Goods: PALO SANTO / LIGNUM VITAE CYLINDERS - Info about Palo Santo / Lignum vitae (Bulnesia sarmientoi): Heartwood is greenish and It is often beautifully figured with blackish green fine veins. This specie has smell (good and pleasant smell) - Characteristics of the product: Logs freshly cut. Cylinders not very shapely; without Bark or maximum of 10% of bark on surface; and without sapwood or a maximum of 25% of sapwood on the surface. Each Cylinder is sealed by wax on all Surface and on both Tops also. - Quality: A-grade and better (oiled wood and with smell). - Sizes: . Diameters = from 200mm up to 450mm and up. . Lengths = 1,000mm and longer. * Note: These goods are raw material are much more suitable for Customers who want to have good quality in Lumber, as well as, who want to have a good and high yield in the production of the end products, such as: Rough sawn timber, Planed lumber (S4S) to produce Flooring (solid wood and engineered); Furniture (home & office); Interior home stair (planking & banister); Furniture and Interior decoration for Yacht;. As well as to produce: Stern tube bearings (Bearing or Bushing blocks lining of the stern tubes of propeller shafts of steamships). Attention: The great strength and tenacity of this wood, combined with the self-lubrificating properties due to the oil content, make this wood especially adapted for products under water. It is raw material to produce: Pencil vase, Carvings, Bowling balls, etc. - Capacity of loading = about 26 Tons in each 40â??CNTR. If you have a question, please, donâ??t hesitate to contact to us on: supplylumber at terra.com.br, and so, we will send to you other Details and Photos relating to this product made by our Company. Henry Chavez
Improving the manufacture of saws tapes, vantec launches in the market of woodworking machines bandsaw horizontal ash tape 700mm x 1 ". With rocker system. The function of the rocker is a counterweight in the mountains shake in the steering wheel, ensuring greater durability of the mountain and preventing the breakdown of that without interfering with the stability of the cut. The dimensions of the width of cut and also the width of the trough will depend on the customer's needs, and 160mm to 220mm, is optional inverter frequency by varying the speed from 0 to 38 mt.Lin / min. As required. The horizontal band saw 700mm x 1 "has three forward speeds, ensuring better performance of the machine, as well as providing a higher yield, distance between the teeth of 19mm and 1.7mm cut It has superior traction rollers pressed synchronized with the speed of the treadmill to ensure efficiency in the conduct of timber and established part to be processed. Using a saw blade with a thickness of 0.9mm, working with a rotation of 1.065rpm, bandsaw vol horizontal 700rpm x 1 "guarantees the quality of the cut, the lowest rate of sawdust and uniformity of the gauge. Dimensions of wood: Minimum path length---------------------5mm Maximum height of the block-----------400mm Minimum length---------------------------400mm Maximum length---------------------------3.000mm Equipament: Ash------------------------------------------700mmx1" Main engine--------------------------------20cv 2p trif Engine feed---------------------------------3cv 4p Maximum width being cut---------------220mm/350mm Total length---------------------------------5.500mm Width----------------------------------------2.000mm Blade: Saw blade------------------------------------1.1/4"x0.9x4.220mm Approximate cut----------------------------1.7mm Feed rate-------------------------------------17-22-32mt/lin/min Average production head------------------198m2/h
Improving the manufacture of saws tapes, vantec launches in the market of woodworking machines bandsaw horizontal ash tape 700mm x 1 ". With rocker system. The function of the rocker is a counterweight in the mountains shake in the steering wheel, ensuring greater durability of the mountain and preventing the breakdown of that without interfering with the stability of the cut. The dimensions of the width of cut and also the width of the trough will depend on the customer's needs, and 160mm to 220mm, is optional inverter frequency by varying the speed from 0 to 38 mt.Lin / min. As required. The horizontal band saw 700mm x 1 "has three forward speeds, ensuring better performance of the machine, as well as providing a higher yield, distance between the teeth of 19mm and 1.7mm cut It has superior traction rollers pressed synchronized with the speed of the treadmill to ensure efficiency in the conduct of timber and established part to be processed. Using a saw blade with a thickness of 0.9mm, working with a rotation of 1.065rpm, bandsaw vol horizontal 700rpm x 1 "guarantees the quality of the cut, the lowest rate of sawdust and uniformity of the gauge. Dimensions of wood: Minimum path length---------------------5mm Maximum height of the block-----------400mm Minimum length---------------------------400mm Maximum length---------------------------3.000mm Equipament: Ash------------------------------------------700mmx1" Main engine--------------------------------20cv 2p trif Engine feed---------------------------------3cv 4p Maximum width being cut---------------220mm/350mm Total length---------------------------------5.500mm Width----------------------------------------2.000mm Blade: Saw blade------------------------------------1.1/4"x0.9x4.220mm Approximate cut----------------------------1.7mm Feed rate-------------------------------------17-22-32mt/lin/min Average production head------------------198m2/h