Rice IR64 5% is a type of long-grain white rice that is grown primarily in India. Here are some of the general specifications for Rice IR64 5%: Broken grains: 5% maximum Moisture content: 14% maximum Foreign matter: 0.1% maximum Chalky kernels: 6% maximum Red and/or red-streaked kernels: 2% maximum Milling degree: Well-milled Grain length: 6.0 mm minimum Grain width: 2.0 mm minimum Color: White Rice IR64 5% is a versatile type of rice that can be used in a variety of dishes, both savory and sweet. It is commonly used in Indian and Southeast Asian cuisine, as well as in dishes from other parts of the world. It has a long, slender grain and a slightly nutty flavor, and it can be cooked in a variety of ways, such as boiling, steaming, or frying. Rice IR64 5% is often used in the production of rice flour, which is a common ingredient in gluten-free baking. It can also be used as a base for dishes such as rice pilaf, stir-fries, and rice salads. Additionally, it can be used to make rice pudding or other sweet dishes.
Brown Sugar VHP (Very High Polarization) 600-1200 is a type of raw sugar that has undergone a special refining process to remove impurities and moisture. Here are some of the general specifications for Brown Sugar VHP 600-1200: Polarization: 99.2 degrees minimum Moisture content: 0.06% maximum Ash content: 0.15% maximum Color: Brown Granulation: Fine to medium grain size Smell: Typical of brown sugar Solubility: 98% minimum Sulphur dioxide (SO2) content: 15 PPM maximum Brown Sugar VHP 600-1200 is commonly used in the food industry as a sweetener in a variety of products, including baked goods, confectionery, and beverages. Its high polarization level means that it contains a high percentage of sucrose, which makes it a popular choice for industrial use. The VHP refining process removes impurities and moisture, which improves the shelf life and stability of the sugar, making it easier to store and transport. In addition to its use as a food ingredient, Brown Sugar VHP 600-1200 can also be used in the production of ethanol, as a feedstock for fermentation. It can also be used as a source of energy in some industrial processes, such as the production of paper and pulp.
Petcoke, also known as petroleum coke, is a carbon-rich solid material that is produced during the refining of crude oil. The specifications of petcoke can vary depending on the type and source of crude oil, as well as the processing method used to produce it. However, here are some of the general specifications for petcoke: - Carbon content: Typically ranges from 85% to 95% - Sulfur content: Can range from less than 1% to over 7% - Moisture content: Typically less than 5% - Ash content: Can range from less than 1% to over 10% - Volatile matter: Can range from less than 5% to over 20% - Size: Can range from a fine powder to large chunks Petcoke is primarily used as a fuel source in industrial processes, such as cement manufacturing, power generation, and steel production. It is a cheaper alternative to coal, and its high carbon content makes it an effective fuel for energy-intensive processes. However, its high sulfur content can contribute to air pollution and acid rain, so it is often subject to emissions regulations. Petcoke is also used in the production of anodes for the aluminum smelting industry, as well as in the production of graphite electrodes for the steel industry. In addition, it is sometimes used as a source of carbon in the production of certain chemicals and materials.
Urea N46% is a common nitrogen fertilizer that is widely used in agriculture. The specifications of Urea N46% can vary depending on the producer and the country of origin, but some of the general specifications are as follows: Nitrogen content (N): 46% minimum Biuret content: 1% maximum Moisture content: 0.5% maximum Granulometry: 90% of particles shall pass through 2.80mm sieve and be retained on 1.00mm sieve. Color: Pure white Free ammonia: 160 PXT PPM maximum Melting point: 132-135 degrees Celsius Radiation: Non-radioactive Physical state: Solid pH: 7.5-8.0 It's important to note that these specifications are general and may vary slightly depending on the producer or the region of origin. The specifications of Urea N46% are important to ensure that it is of high quality and safe for use in agricultural applications. Urea N46% is primarily used as a nitrogen fertilizer in agriculture. Nitrogen is a key element in plant growth, and urea N46% is a highly concentrated source of nitrogen. When applied to soil, it is converted into ammonium, which can be taken up by plant roots. Urea N46% is used on a wide variety of crops, including corn, wheat, rice, soybeans, and many others. It is commonly used in both conventional and organic farming practices to promote healthy plant growth and increase crop yields. The use of urea N46% can help to increase protein content in crops such as wheat, barley, and oats. In addition to its use as a fertilizer, urea N46% is also used in the production of animal feed, where it is added to increase the protein content of the feed. It is also used in the production of some plastics, resins, and adhesives. Overall, urea N46% is a versatile product that is widely used in agriculture and other industries due to its high nitrogen content and easy availability.
The specifications of Sugar ICUMSA 45 are defined by the International Commission for Uniform Methods of Sugar Analysis (ICUMSA) and the standards vary slightly depending on the country of origin. However, some of the general specifications for ICUMSA 45 sugar are as follows: Appearance: White crystalline powder Smell: Odorless Taste: Sweet Polarization: 99.80 degrees minimum Ash content: 0.04% maximum Moisture: 0.04% maximum Granulation: Fine to medium Solubility: 100% dry and free-flowing Color: Maximum 45 ICUMSA units Radiation: Normal levels Sediments: None Crop Year: Latest It's important to note that these are general specifications and may vary slightly depending on the producer or the region of origin. However, these specifications give an idea of the general standards that ICUMSA 45 sugar adheres to. Sugar ICUMSA 45 is a type of refined sugar that is commonly used in food and beverage products. The term "ICUMSA" stands for International Commission for Uniform Methods of Sugar Analysis, which is an international organization that establishes standards for sugar testing and analysis. Sugar ICUMSA 45 is a white crystalline powder that is made from sugarcane or sugar beet. It is highly refined, meaning that it has been processed to remove impurities and color. The number "45" in the name refers to the ICUMSA scale, which is used to measure the color of sugar. ICUMSA 45 sugar has a maximum color of 45 units, which indicates a high level of purity. ICUMSA 45 sugar is a popular choice for food and beverage manufacturers because of its high quality and purity. It is used as a sweetener in a wide variety of products, including baked goods, beverages, and confectionery. It is also used in the production of pharmaceuticals and personal care products. The production and trade of ICUMSA 45 sugar is regulated by international organizations such as the International Sugar Organization (ISO) and the World Trade Organization (WTO). The price of ICUMSA 45 sugar is influenced by a variety of factors, including global supply and demand, weather conditions, and government policies.
Moisture 13% max Fat: Minimum 2 to maximum 2.5% Proteins: 8% min. (N x 6.25 of dry matter) Crude fibres: 0.8% max. Granularity: 100% through 1mm sieve. 50% max. through 0.3mm sieve Corn, also known as maize, is a widely grown cereal grain and one of the most important agricultural products in the world. Corn is a member of the grass family and is native to the Americas, where it has been cultivated for thousands of years. Today, it is grown in many countries around the world, with the United States, China, and Brazil being the top producers. Corn is used for a variety of purposes, including human consumption, animal feed, and industrial applications. In human consumption, corn can be eaten whole or ground into cornmeal, which is used to make many different foods such as tortillas, cornbread, and polenta. It is also used as a key ingredient in many processed foods, such as breakfast cereals, snacks, and soft drinks. In animal feed, corn is used as a high-energy and protein-rich ingredient in livestock diets, particularly for poultry, swine, and cattle. Corn is also used as a source of starch for the production of biofuels such as ethanol. Corn plants typically grow to be around six feet tall and produce ears of corn, which contain the kernels that are harvested for consumption or processing. There are many different varieties of corn, each with different characteristics such as color, sweetness, and starch content.
Protein content of 12.5%, Minimum test weight of 77 kg/hl Maximum moisture content of 14% Minimum wet gluten content of 25% Minimum W number of 180 Minimum Hagberg Falling Number of 250 seconds Maximum bug damageof 1.8% Maximum foreign matter content of 2% Wheat 12.5% protein is a type of wheat that is classified based on its protein content. Protein content in wheat is important because it affects the quality of the flour produced from the wheat. The protein content determines the gluten content, which is responsible for the elasticity and structure of dough when making bread or other baked goods. Wheat 12.5% protein is considered a high protein wheat, with a protein content of 12.5% of the weight of the wheat kernel. This is a desirable protein content for making bread because it produces a strong and elastic dough that can hold air pockets during the fermentation process, resulting in a light and fluffy texture. The protein content of wheat can vary depending on the variety of wheat, the growing conditions, and the location where it is grown. Other common protein levels for wheat include 11% and 14% protein content. Farmers and buyers often use protein content as a key factor in determining the price of wheat, as higher protein levels are generally more desirable for certain baking applications.
* Quantity MIN 50,000MT x 12 months * Origin: German Origin Specifications: The products are in accordance with the specifications requested by The Buyer or presented by The Seller. * Payment: By MT103/760 * Price/Commissions: Final price to Buyer is the Gross, including all commissions. * Payment is then made by Seller, who carries out all commissions transfers. *Contract: 12 Months with possible rollovers. * Inspection: SGS or similar * CIF SBLC PROCEDURE - Summary of our procurement process:- 1. Buyer issue an RFP (Per attached template -w- specification sheet) 2. We issue a commercial offer with all relevant tacit data 3. Buyer returns signed commercial offer in conjunction with a Banker Signed RWA letter (Verbiage will be attached in the commercial offer) 4. Seller issues the Sales & Purchase Agreement 5. The Contract is formalized and lodged with respective bankers 6. Buyer's Banker issues a Pre-Advice MT799 7 Seller issues the Price Lock Notice (a discount is set on this day per the Platts Assessment of the day) 8. Buyer Banker issues the collateral (MT760) 9. Seller's Banker issues 2% Performance Bond 10. Seller charters the vessel/barges 11 Seller berths the vessel/barges 12. Seller loads the vessel/barges 13. Seller issues Product & Shipping Documentation (Digitally AND via courier) 14. Vessel/Barge departs for destination
Products - German Origin - Product List With Pricing Details Refined/produced In Germany, Not Re-Documented Category A (AVIATION KEROSENE) 1.Jet Fuel A-1 2.Jet Fuel TS-1 Category B (D2/EN590) 1.Diesel 10 PPM (Gasoil 0.001%S) 2.Diesel 50 PPM (Gasoil 0.005%S) 3.Diesel 500 PPM (Gasoil 0.05%S) 4.Diesel 1000 PPM (Gasoil 0.1%S) 5.Diesel 2500 PPM (Gasoil 0.25%S) Category C (PETROL) 1.Unleaded Gasoline RON 92 2.Unleaded Gasoline RON 95 3.Unleaded Gasoline RON 97 Category D (D6 RESIDUAL FUEL) 1.Fuel Oil 3.5% 180 CST 2.Fuel Oil 3.5% 380 CST
Refined/produced In Germany, Not Re-documented - Min. Qty Is 50,000 Mt For All Products Except Jet Fuel With Min. Qty Of 2m Bbl And Min Contract Period Is 12 Months. Ship To Ship Transfer (Sts) Procurement Process 1.1. The Seller Issues A Commercial Offer. - The Commercial Offer Exhibits Information Such As Specific Prices, Volume, Load/discharge Ports, Delivery Timeline, Product Specifications, Etc. 1.2. The Buyer Formalizes And Returns The Commercial Offer In Conjunction With A Banker Signed Ready Willing And Able (Rwa) Letter Stating, The Banker Shall Issue A Collateral Instrument On Behalf Of The Buyer. 1.3. The Seller Issues An Authorization To Verify (Atv), Which Is Transmitted Between Bankers. -the Atv Is To Validate/confirm The Sellers: A) Liquidity. B) Hydrocarbon Trading Experience. 2. Sales Agreement 2.1. The Seller Issues The Sales & Purchase Agreement. -the Sales & Purchase Agreement Exhibits Information Such As Price, Index Discount, Volume, Load/discharge Ports, Delivery Timeline, Product Specifications, Banking Coordinates, And Other Tacit Data. -the Delivery Timeline Is Contingent On The Volume, Load/discharge Ports, And Vessel Availability. 3. Formalization/banking 3.1. The Buyer Formalizes And Submits The Sales & Purchase Agreement Within (3) Business Days. 3.2. The Sales & Purchase Agreement Is Lodged With The Buyer's And The Seller's Bank. 3.3. The Buyer's Banker Transmits A Pre-advice Via Swift Mt799. 3.4. The Buyer's Banker Transmits The Collateral Instrument Via Swift Mt760. 3.5. The Seller's Banker Issues A 2% Performance Bond. 4. Loading/documentation 4.1. Subsequent To The Validation Of The Collateral Instrument, The Seller Loads The Vessel (At Own Expense) And Issues The Product & Delivery Documentation. -product & Delivery Documentations Are Submitted Digitally And Via Courier When Created. Documentation Comprises Of, But Is Not Limited To, Charter Party Agreement, Vessel Questionnaire 88, Vessel/product Insurance Policy (Lloyds), Commitment To Supply/commercial Invoice, Statement Of Product Availability/certificate Of Origin, Bill Of Lading/cargo Manifest, Ullage Report, Certificate Of Quality, Notice Of Readiness/eta To Destination, Etc. -the Buyer May Track And/or Communicate With The Vessel At Their Convenience. 5. Delivery/injection 5.1. Per Standard Shipping Protocols, The Shipper Contacts The Buyer Within A 48-hour Arrival Date/time. 5.2. The Seller Issues The Authorization To Board (Atb) And The Dip Test Authorization (Dta). 5.3. The Buyer Executes An Mt103 Wire Transfer Subsequent To The Quality/quantity Inspection And In Accordance To The Final Invoice. 5.4. The Seller Transfers The Certificate Of Ownership (Title) Subsequent To The Receipt Of Payment. 5.5. Injection Process Commences. [fuel Is Injected Into The Buyer's Vessel(S)]
Min. Qty is 50,000 MT for all products except Jet Fuel with Min. Qty of 2M BBL and Min Contract Period is 12 months. FOB GERMANY: VTO (Vessel TAKE OVER) PROCUREMENT PROCESS 1. REQUEST 1.1. The Buyer Issues A Letter Of Interest Or The Request For Product Application. - The Letter Of Interest Or The Request For Product Application Shall Consist Of Product Name, Volume, Discharge/retrieval Port, Specification(s), Collateral Instrument Issuing Bank Name, Company Information, Etc. 2. Commercial Offer 2.1. The Seller Issues A Commercial Offer. -The Commercial Offer Exhibits Information Such As Specific Prices, Volume, Load/discharge Ports, Delivery Timeline, Product Specifications, Etc. 2.2. The Buyer Formalizes And Returns The Commercial Offer In Conjunction With A Banker Signed Ready Willing And Able (rwa) Letter Stating, The Banker Shall Issue A Collateral Instrument On Behalf Of The Buyer. 3. Sales Agreement 3.1. The Seller Issues The Sales & Purchase Agreement. -The Sales & Purchase Agreement Exhibits Information Such As Price, Index Discount, Volume, Load/discharge Ports, Delivery Timeline, Product Specifications, Banking Coordinates, And Other Tacit Data. -The Delivery Timeline Is Contingent On The Volume, Load/discharge Ports, And Vessel Availability. 4. Formalization/banking 4.1. The Buyer Formalizes And Submits The Sales & Purchase Agreement Within (3) Business Days. 4.2. The Sales & Purchase Agreement Is Lodged With The Buyer's And The Seller's Bank. 4.3. The Buyer's Banker Transmits A Pre-advice Via Swift MT799. 4.4. The Buyer's Banker Transmits The Collateral Instrument Via Swift MT760. 4.5. The Seller's Banker Issues A 2% Performance Bond. 5. Loading/documentation 5.1. Subsequent To The Validation Of The Collateral Instrument, The Sellerloads The VESSEL (At Own Expense) And Issues The Product & Delivery Documentation. -Product & Delivery Documentations Are Submitted Digitally And Via Courier When Created. Documentation Comprises Of, But Not Limited To; Charter Party Agreement, Vessel Questionnaire 88, Vessel/product Insurance Policy (lloyds), Commitment To Supply/commercial Invoice, Statement Of Product Availability/certificate Of Origin, Bill Of Lading/cargo Manifest, Ullage Report, Certificate Of Quality, Notice Of Readiness/eta To Destination, Etc. -The Buyer May Track And/or Communicate With The Vessel At Their Convenience. 6. Delivery/discharge 6.1. The Seller Issues The Authorization To Board (ATB) And The Dip Test Authorization (DTA). 6.2. The Buyer Executes An Mt103 Wire Transfer Within 24 Hours Subsequent To The Quality/quantity Inspection (optional) And In Accordance With The Final Invoice. 6.3. The Seller Transfers The Certificate Of Ownership (title) Subsequent To The Receipt Of Payment. 6.4. The Buyer Takes Over The Vessel. 6.5. Vessel Departs
CIF PROCEDURE: BRENT PLATT DISCOUNT: US$8.00 Gross: US$4.00 Net: BELOW BRENT PLATT PRICE. US$4.00 Commission [US$2.00 for Buyer Agents & US$2.00 for Seller Agents - Closed] Buyer sends Letter of Intent [LOI] addressed to the Seller. Seller and Buyer sign and seal Sales/Purchase Agreement and copies sent to both parties bankers, the electronically signed copy considered legally binding and enforceable in international arbitration laws. Buyer's Corresponding bank via MT199 Pre-advice Seller's financier's bank and states its readiness, willingness and ability to swift an operative MT760 SBLC to seller's bank. Also request the seller's bank to confirm to it via MT199 its readiness, willingness and ability to receive MT760 SBLC and swift 2% performance bond (PB) to it. Seller's bank shall confirm via MT199 Pre-advice to Buyer's bank its readiness, willingness and ability to receive MT760 SBLC and swift 2% performance bond (PB) to Buyer's bank. Buyer's Bank shall swift an operative MT760 SBLC for total cargo to Seller financier's bank in Seller financier's acceptable Verbiage
CIF Procurement Process - Min. Qty is 50,000 MT for all products except Jet Fuel with Min. Qty of 2M BBL and Min Contract Period is 12 months. 1.1. The Seller Issues A Commercial Offer. - The Commercial Offer Exhibits Information Such As Specific Prices, Volume, Load/discharge Ports, Delivery Timeline, Product Specifications, Etc. 1.2. The Buyer Formalizes And Returns The Commercial Offer In Conjunction With A Banker Signed Ready Willing And Able (Rwa) Letter Stating To Issue A Collateral Instrument On Behalf Of The Buyer. 2. Sales Agreement 2.1. The Seller Issues The Sales & Purchase Agreement. - The Sales & Purchase Agreement Exhibits Information Such As Price, Index Discount, Volume, Load/discharge Ports, Delivery Timeline, Product Specifications, Banking Coordinates, And Other Tacit Data. - The Delivery Timeline Is Contingent On The Volume, Load/discharge Ports, And Vessel Availability. 3. Formalization/banking 3.1. The Buyer Formalizes And Submits The Sales & Purchase Agreement Within (3) Business Days. 3.2. The Sales & Purchase Agreement Is Lodged With The Buyers And The Sellers Bank. 3.3. The Buyers Banker Transmits A Pre-advice Via Swift Mt799. 3.4. The Buyer's Banker Transmits The Collateral Instrument Via Swift Mt760. 3.5. The Seller's Banker Issues A 2% Performance Bond. 3.6. Within 7 Days Of Verification Of The Collateral Instrument, The Seller Issues A Specially Curated Insurance Policy From Llyods Of London For 110% Of The Value. 4. Loading/documentation 4.1. Subsequent To The Validation Of The Collateral Instrument, The Seller Loads The Vessel (At Own Expense) And Issues The Product & Delivery Documentation. Product & Delivery Documentations Are Submitted Digitally And Via Courier When Created. Documentation Comprises Of, But Not Limited To: 1. Charter Party Agreement 2. Vessel Questionnaire 88 3. Vessel/product Insurance Policy (Lloyds) 4. Commitment To Supply 5. Commercial Invoice 6. Statement Of Product Availability 7. Certificate Of Origin 8. Bill Of Lading 9. Cargo Manifest 10. Ullage Report 11. Certificate Of Quality(Sgs At Origin) And Notice Of Readiness 12. Eta To Destination, Etc. The Buyer May Track And/or Communicate With The Vessel At Their Convenience. 5. Delivery/discharge 5.1. Per Standard Shipping Protocols, The Shipper Contacts The Buyer And Target Harbormaster Within A 48-hour Arrival Date/time. 5.2. The Seller Issues The Authorization To Board (Atb) And The Dip Test Authorization (Dta). 5.3. Customs Will Accompany The Buyer Per Local Rules. 5.4. The Buyer Executes An Mt103 Wire Transfer Subsequent To The Quality/quantity Inspection And In Accordance To The Final Invoice. 5.5. The Seller Transfers The Certificate Of Ownership (Title) Subsequent To The Receipt Of Payment. 5.6. Shore Tanks Are Injected Per The Harbormasters Directives.
* Quantity MIN 1,000,000 Barrels x 12 months * Origin: Russian Federation Specifications: Standard Export Quality. * Payment: By MT103/760 * Price/Commissions: Final price to Buyer is the Gross, including all commissions. Commissions * Payment is then made by Seller, who carries out all commissions transfers. * Contract: 12 Months with possible rollovers. * Inspection: SGS or similar * CIF DLC or SBLC PROCEDURE 1. Buyer issues ICPO, company registration, I.D. and Top World Bank redacted Bank Statement or equivalent 2. Seller issues Sales and Purchase Agreement (SPA). 3. Buyer signs and returns SPA. 4. Buyer's Bank issues a RWA letter to guarantee to issue an instrument on behalf of the Buyer within three working days after receiving the following PPOP. 5. Seller issues PPOP to Buyer including the following: A. Copy of license to export issued by the Department of the Ministry of Energy. B. Copy of approval to export issued by the Department of Ministry of Justice. C. Copy of statement of availability of the product. D. Copy of the refinery commitment to produce the product. E. Copy of contract to transport the product to port F. Copy of the port storage agreement G. Copy of the charter party agreements to transport the product to the discharge port. H. Tank Storage Receipt (TSR) I. Q & Q by Current SGS report. 6. Buyer's bank issues operative Letter of Credit DLC MT 700 or SBLC MT-760 to Seller's fiduciary Bank account. 7. Seller issues 2% Performance Bond to Buyers bank. 8. Shipment Commences 9. On getting to Buyer's port of discharge, the Buyer's inspection team board the vessel and perform an inspection. Buyer sends SGS report to Seller. 10. Seller provides shipping document and a master commercial invoice to Buyer, within 3 banking days, Buyer makes the payment in full via MT 103/TT to Seller's Bank account.
* Quantity : MIN 50,000MT x 12 months * Origin: Russian Federation Specifications: Standard Export Quality. * Payment: By MT103/760 * Price/Commissions: Final price to Buyer is the Gross, including all commissions. Commissions * payment is then made by Seller, who carries out all commissions transfers. * Contract: 12 Months with possible rollovers. * Inspection: SGS or similar CIF DLC or SBLC PROCEDURE 1. Buyer issues ICPO, company registration, I.D. and Top World Bank redacted Bank Statement or equivalent 2. Seller issues Sales and Purchase Agreement (SPA). 3. Buyer signs and returns SPA. 4. Buyer's Bank issues a RWA letter to guarantee to issue an instrument on behalf of the Buyer within three working days after receiving the following PPOP. 5. Seller issues PPOP to Buyer including the following: A. Copy of license to export issued by the Department of the Ministry of Energy. B. Copy of approval to export issued by the Department of Ministry of Justice. C. Copy of statement of availability of the product. D. Copy of the refinery commitment to produce the product. E. Copy of contract to transport the product to port F. Copy of the port storage agreement G. Copy of the charter party agreements to transport the product to the discharge port. H. Tank Storage Receipt (TSR) I. Q & Q by Current SGS report. 6. Buyers bank issues operative Letter of Credit DLC MT 700 or SBLC MT-760 to Sellers fiduciary Bank account. 7. Seller issues 2% Performance Bond to Buyers bank. 8. Shipment Commences 9. On getting to Buyer's port of discharge, the Buyer's inspection team board the vessel and perform an inspection. Buyer sends SGS report to Seller. 10. Seller provides shipping document and a master commercial invoice to Buyer, within 3 banking days, Buyer makes the payment in full via MT 103/TT to Seller's Bank account.
* Quantity MIN 1,000,000 Barrels x 12 months with R/E * Origin: Russian Federation Specifications: Standard Export Quality. * Payment: By MT103/760 * Price/Commissions: Final price to Buyer is the Gross, including all commissions. Commissions * Payment is then made by Seller, who carries out all commissions transfers. *Contract: 12 Months with possible rollovers. * Inspection: SGS or similar * CIF DLC or SBLC PROCEDURE 1. Buyer issues ICPO, company registration, I.D. and Top World Bank redacted Bank Statement or equivalent 2. Seller issues Sales and Purchase Agreement (SPA). 3. Buyer signs and returns SPA. 4. Buyer's Bank issues a RWA letter to guarantee to issue an instrument on behalf of the Buyer within three working days after receiving the following PPOP. 5. Seller issues PPOP to Buyer including the following: A. Copy of license to export issued by the Department of the Ministry of Energy. B. Copy of approval to export issued by the Department of Ministry of Justice. C. Copy of statement of availability of the product. D. Copy of the refinery commitment to produce the product. E. Copy of contract to transport the product to port F. Copy of the port storage agreement G. Copy of the charter party agreements to transport the product to the discharge port. H. Tank Storage Receipt (TSR) I. Q & Q by Current SGS report. 6. Buyer's bank issues operative Letter of Credit DLC MT 700 or SBLC MT-760 to Seller's fiduciary Bank account. 7. Seller issues 2% Performance Bond to Buyers bank. 8. Shipment Commences 9. On getting to Buyer's port of discharge, the Buyer's inspection team board the vessel and perform an inspection. Buyer sends SGS report to Seller. 10. Seller provides shipping document and a master commercial invoice to Buyer, within 3 banking days, Buyer makes the payment in full via MT 103/TT to Seller's Bank account.
* Quantity MIN 1,000,000 Barrels x 12 months * Origin: Russian Federation Specifications: Standard Export Quality. * Payment: By MT103/760 * Price/Commissions: Final price to Buyer is the Gross, including all commissions. Commissions * Payment is then made by Seller, who carries out all commissions transfers. Contract: 12 Months with possible rollovers. Inspection: SGS or similar * CIF DLC or SBLC PROCEDURE 1. Buyer issues ICPO, company registration, I.D. and Top World Bank redacted Bank Statement or equivalent 2. Seller issues Sales and Purchase Agreement (SPA). 3. Buyer signs and returns SPA. 4. Buyer's Bank issues a RWA letter to guarantee to issue an instrument on behalf of the Buyer within three working days after receiving the following PPOP. 5. Seller issues PPOP to Buyer including the following: A. Copy of license to export issued by the Department of the Ministry of Energy. B. Copy of approval to export issued by the Department of Ministry of Justice. C. Copy of statement of availability of the product. D. Copy of the refinery commitment to produce the product. E. Copy of contract to transport the product to port F. Copy of the port storage agreement G. Copy of the charter party agreements to transport the product to the discharge port. H. Tank Storage Receipt (TSR) I. Q & Q by Current SGS report. 6. Buyer's bank issues operative Letter of Credit DLC MT 700 or SBLC MT-760 to Seller's fiduciary Bank account. 7. Seller issues 2% Performance Bond to Buyers bank. 8. Shipment Commences 9. On getting to Buyer's port of discharge, the Buyer's inspection team board the vessel and perform an inspection. Buyer sends SGS report to Seller. 10. Seller provides shipping document and a master commercial invoice to Buyer, within 3 banking days, Buyer makes the payment in full via MT 103/TT to Seller's Bank account.
* Quantity MIN 50,000MT x 12 months * Origin: Russian Federation Specifications: Standard Export Quality. * Payment: By MT103/760 * Price/Commissions: Final price to Buyer is the Gross, including all commissions. Commissions * payment is then made by Seller, who carries out all commissions transfers. * Contract: 12 Months with possible rollovers. * Inspection: SGS or similar CIF DLC or SBLC PROCEDURE 1. Buyer issues ICPO, company registration, I.D. and Top World Bank redacted Bank Statement or equivalent 2. Seller issues Sales and Purchase Agreement (SPA). 3. Buyer signs and returns SPA. 4. Buyer's Bank issues a RWA letter to guarantee to issue an instrument on behalf of the Buyer within three working days after receiving the following PPOP. 5. Seller issues PPOP to Buyer including the following: A. Copy of license to export issued by the Department of the Ministry of Energy. B. Copy of approval to export issued by the Department of Ministry of Justice. C. Copy of statement of availability of the product. D. Copy of the refinery commitment to produce the product. E. Copy of contract to transport the product to port F. Copy of the port storage agreement G. Copy of the charter party agreements to transport the product to the discharge port. H. Tank Storage Receipt (TSR) I. Q & Q by Current SGS report. 6. Buyer's bank issues operative Letter of Credit DLC MT 700 or SBLC MT-760 to Seller's fiduciary Bank account. 7. Seller issues 2% Performance Bond to Buyers bank. 8. Shipment Commences 9. On getting to Buyer's port of discharge, the Buyer's inspection team board the vessel and perform an inspection. Buyer sends SGS report to Seller. 10. Seller provides shipping document and a master commercial invoice to Buyer, within 3 banking days, Buyer makes the payment in full via MT 103/TT to Seller's Bank account.
* Quantity MIN 50,000MT x 12 months * Origin: Russian Federation Specifications: Standard Export Quality. * Payment: By MT103/760 * Price/Commissions: Final price to Buyer is the Gross, including all commissions. Commissions * Payment is then made by Seller, who carries out all commissions transfers. * Contract: 12 Months with possible rollovers. * Inspection: SGS or similar * CIF DLC or SBLC PROCEDURE 1. Buyer issues ICPO, company registration, I.D. and Top World Bank redacted Bank Statement or equivalent 2. Seller issues Sales and Purchase Agreement (SPA). 3. Buyer signs and returns SPA. 4. Buyer's Bank issues a RWA letter to guarantee to issue an instrument on behalf of the Buyer within three working days after receiving the following PPOP. 5. Seller issues PPOP to Buyer including the following: A. Copy of license to export issued by the Department of the Ministry of Energy. 8 B. Copy of approval to export issued by the Department of Ministry of Justice. C. Copy of statement of availability of the product. D. Copy of the refinery commitment to produce the product. E. Copy of contract to transport the product to port F. Copy of the port storage agreement G. Copy of the charter party agreements to transport the product to the discharge port. H. Tank Storage Receipt (TSR) I. Q & Q by Current SGS report. 6. Buyer's bank issues operative Letter of Credit DLC MT 700 or SBLC MT-760 to Seller's fiduciary Bank account. 7. Seller issues 2% Performance Bond to Buyers bank. 8. Shipment Commences 9. On getting to Buyer's port of discharge, the Buyer's inspection team board the vessel and perform an inspection. Buyer sends SGS report to Seller. 10. Seller provides shipping document and a master commercial invoice to Buyer, within 3 banking days, Buyer makes the payment in full via MT 103/TT to Seller's Bank account.
Description : -COVID-19 Ab test is used for qualitative detection of the lgM and lgG antibodies of COVID-19 in human serum/ plasma or whole blood Production : 10,000 - 1-3 Days 100,000 - 4-6 Days 500,000 - 7-8 Days 1,000,000 - 10-15 Days
