No. Type Pure Acrylic Emulsion with high sheen. 1 FEATURES It provides a smooth long lasting rich finish with high sheen to the interior and exterior wall. It is washable and most stain can be removed easily by sponging with mild soap solution. The paint film is having good resistance to fungus and mildew. 2 RECOMMENDED APPLICATION STAR valvet glow emulsion is an interior and exterior wall finish that can be applied on all type of smooth plaster, false ceiling, asbestos sheets, concrete etc. PRODUCT TECHNICAL DATA No COLOURS White & other shades as per shade cards 1. FINISH Smooth and high sheen 2. COVERAGE On smooth primer masonry surface by brushing 1 coat: 140-160 sq.ft/ltr 2 coats: 80-90 sq.ft/ltr (It may vary due to factors such as methods and conditions during application and surface roughness etc.) 3. DRYING TIME Surface drying time â?? 10-15 minutes 4. GLOSS LEVELS/SHEEN LEVELS Silky smooth with high sheen 5. FLASH POINT (IS101/108 Part 1, Sec 9) Non- flammable 6. SUITABILITY OF THINNER PAINT Use within 24 hrs. 7. SHELF LIFE 3 years from date of manufacture in original tightly closed containers away from direct sunlight and excessive heat. PERFORMANCE DATA No ABRASION RESISTANCE Excellent 1. WATER RESISTANCE Excellent 2. REMARKS a) Kindly refer to the MSDS for the saffro mellow coatings & resins STAR velvet glow emulsion which gives detailed information on Safety measures while handling the paint. b) Store the product at ambient conditions in well ventilate locations and away from the source of ignition and fire. c) Avoid eye and skin contact. In case of eye and skin contacts wash with plenty of clean water. d) Do not inhale or inject. In case of inhalation move to fresh air and seek medical attention. e) Use protective equipments like rubber/polythene gloves, safety goggle/glasses, face mask while handling. f) In humid areas, use of a bio-wash solution is recommended to remove surface fungus growth, fungal spores, mould etc. before application of the paint system. g) Do not apply when ambient temperature is less than 10�ºC or if the temperature might drop to this level within 4 hrs of application. h) Tinted paints need thorough shaking/mixing immediately after tinter addition as well as before use. i) For removing stains, sponge clean with a mild soap solution and wipe clean. Ensure drying time of 1 Week before cleaning.
Ritver All Weather Smooth Emulsion (Silk) is a premium grade high performance acrylic topcoat formulated from special latex with inert pigments. The product has good alkali resistance properties and it is extremely low toxicity and odour. Ritver All Weather smooth Emulsion (Silk) has very good weather resistance, durability and can be an ideal choice for a good protective finish. It has very low dirt pick up and flexibility extends through a wide range of temperature Substrates: Concrete, plaster, masonry, brick work and timber. Area of Use: Recommended for Interior and Exterior.
Our Paint can increase strength & Product life by 1.25 times or more. i.e. if tensile strength is 2 ton, it can be increased to 7 ton with the application of our "DECORA" brand anti rust coatings.. All products will be available in packing size of the 20 ltr., 10 ltr, 4,2 and 1 ltr. customize packing can be developed for order size of more than 100 ltr.
Items Method ZD500C3 Grease Type Lithium Grease Color Yellow or Blue Texture Smooth and transparent NLGI 3#Thickener Type Lithium base-12-hydroxy Thickener Content 13%-15% Penetration Worked 60 GB/T 269 240-250 Dropping point min GB/T 4929 135-140 Copper Corrosion GB/T 7326 pass Base Fluid Properties Base Fluid Type Mineral Viscosity @40 cst GB/T 265 185 Viscosity @100 cst GB/T 265 12 Pour Point -20 Propertie Great in anti-water; Better mechanical invariability; Better anti-rust; Good oxidation stability; Can take place of calcium base and sodium base greases. This product is made of refined base oil, thickened by fatty acid metallic soap thickener, added with many kinds of additives, for instance, abrasion and extreme pressure resisting, anti-corrosive, antioxidant and rustproof etc.
No. Type SUMO Acrylic Washable Distemper is a water-based, interior wall paint. It is India's most trusted distemper and gives your walls a delightful, attractive, matt finish. 1 FEATURES SUMO Acrylic Washable Distemper gives good durability and smooth finish. Due to the fast drying properties, quicker completion of painting job is possible. It is available in bright and attractive shades.. 2 RECOMMENDED APPLICATION SUMO Acrylic Washable Distemper is an interior wall finish. It can be applied on all type of smooth plaster, false ceiling, asbestos sheets, concrete etc. PRODUCT TECHNICAL DATA No COLOURS White & other shades as per shade cards 1. FINISH Smooth and matt 2. COVERAGE On smooth primer masonry surface by brushing 35-40 sq.ft/kg/2 coat (It may vary due to factors such as methods and conditions during application and surface roughness etc.) 3. DRYING TIME Surface drying time - 25-30 minutes 4. GLOSS LEVELS/SHEEN LEVELS Matt 5. FLASH POINT (IS101/108 Part 1, Sec 9) Non- flammable 6. SUITABILITY OF THINNER PAINT Use within 24 hrs. 7. SHELF LIFE 12 months from date of manufacture in original tightly closed containers away from direct sunlight and excessive heat.
Eco HOME Acrylic Distemper gives smooth ,beautiful and matt finish to the wall at an affordable price, It does not come off on the hands or on clothes likechuna thus ensuring bright colourful walls all year long.It is an economical chalk resistance coating. RECOMMENDED APPLICATION Used only on interior surface. PRODUCT TECHNICAL DATA No COLOURS White & other shades as per shade cards 1. FINISH Smooth and matt 2. COVERAGE On smooth primer masonry surface by brushing 18-20 sq.ft/kg/2 coat (It may vary due to factors such as methods and conditions during application and surface roughness etc.) 3. DRYING TIME Surface drying time 25-30 minutes 4. GLOSS LEVELS/SHEEN LEVELS Matt 5. FLASH POINT (IS101/108 Part 1, Sec 9) Non- flammable 6. SUITABILITY OF THINNER PAINT Use within 24 hrs. 7. SHELF LIFE 12 months from date of manufacture in original tightly closed containers away from direct sunlight and excessive heat.
Features: Based on emulsion and diversity of natural sand imitate the nature stone, excellent weather resistance and water resistance capability. Natural raw materials nontoxic. Application: Applied to residence, hotel, school, office building, landmark of new-built and maintenance engineering of exterior finish. And also widely used in decorate and protect surface of the concrete, cement, brick structure. Specification: Sheen: matt & mercerizing Colour: so many colours for your choise Theoretical coverage: 0.3m2/time/kg, note: the practical consumption may vary with substrate condition, construction methods, environment and other factors. Drying time: surface dry: 4hours/25¡ãc, hard dry: 48 hours/25¡ãc; recoating: above 8 hours/25¡ãc (drying time will be change because of the different temperature and humidity.) Packing: 25kg/barrel Packing: 25kg/barrel
Material: hdf Density:+950kg/m3 Door skin width: 660/740/840/920/1020mm Height: 2150mm Surface: natural wood veneer, melamine, enamel paint or plain door skin. We supply hdf moulded door skins, door panels, many designs to choose, with natural wood veneer, melamine finish, painted, with grains. Thickness 3.0 to 4.5mm, width of panel upto 1020. In natural wood veneer : sapele, mahogany, teak, golden teak, walnut. Wenge, black walnut, rosewood, oak, chinese oak, red white oak. Cherry, makore. Many of these veneers can be supplied with engineered veneered surface
Weather proof Water resistant Alkaline resistant Excellent filling property
Interior Walls, ceiling and asbestos panels, etc.
Monocoushe Paint Superior Italian Coatings
Latex Paint Lavable/ Washable Water Paint
Intumescent Paints (Wall, Metal & Wood)
Spray Paints (All Paint Colors) 400ML/275GRMS
Description Expression Duro Exterior Emulsion water based Paint, high performance, long lasting exterior paint, formulated to suit the extreme weather conditions. The product is based on pure Acrylic polymer and hence it forms a tough and flexible protective film, with an excellent bonding to the substrate. Its unique advanced technology ensures that exterior walls are resistant against algae and fungi growth. Unique Features & Benefits Excellent Exterior durability Ease of Application Excellent washability Smooth & Matt finish Faster drying Excellent resistance to fungal and algae growth Excellent coverage.
Nuvent Budget Acrylic Interior Emulsion Paint offers excellent smoothness to touch and an elegant and smooth finish It is highly durable and lasts longer than distemper. Nuvent Budget Acrylic Interior Emulsion is best when applied with Budget Interior Primer. Technical Details Coverage Area : 75 to 78 Sq.ft*/litre (2 coats) Drying Time : 30 min (Recoat Frequency : 1hr) Solid content : 50 to 60 wt% Coverage : 50 to 53 sq.ft./lt Drying Time : 45 minutes Recoat frequency : 2 hours Specific gravity : @ 30 C, gms/ cc 1.2 Electrochemical Impedance Test- ISO 16773 @ 5 % NaCl Corrosion inhibition efficiency of 98% till 800 hours Salt spray test as per ASTM B117 (5% NaCl) Less than 5% creep at 700 hours
Description Two Component, Air-drying, Epoxy Polyamide Cured Finish Paint. Recommended Use :- It Is Recommended As A Top Coat For Structures, Pipelines, Vessels, Equipments And Machineries, Storage Tanks Etc. In Fertilizers And Chemical Plant, Cement Plants, Power Plants, Steel Plants, Pharmaceutical And Petrochemical Complexes, Refineries Etc. Product Is Also Recommended For Application Over Suitable Primer For Oem Industry Like Machine Tools, Pumps, Machineries, Transformers Etc. Physical Data Colour : assorted Shades Finish : glossy / Semi Glossy Solids By Volume : 40 +3% (depends On Shade) Theoretical Spreading Rate : 13.33 Sq.mt / Ltr At Recommended Dft Of 30 au Flash Point : base: Above 23 C Hardener: Above 23 C Drying Characteristics (at 30'c And 65% Relative Humidity) : hard Dry : Overnight Full Cure : 7 Days Shelf Life : base : 6 Months Hardener : 6 Months Surface Preparation This Being A Topcoat, Which Is Applied Over, Primer Or Intermediate Coats, The Surface Should Be Free From Oil, Moisture, Dust And Dirt. Aged Epoxy / Pu Coating Should Be Roughened By Emery Paper Grade 400 / 600 For Better Bonding. Application Data :- Mixing Ratio : base : Hardener (as Per Our Recommendation) Application : by Brush / By Conventional Spray / By Airless Spray Thinner : 190 Pot Life : 4-6hrs Min At 30 C Recommended Dft : 30-40 U Over Coating Interval : min : 8 Hours Max : 24 Hours Compatibility : can Be Over Coated With Pu, Chlorinated Rubber And Synthetic Enamel Paints.
Description Two component, air-drying, Epoxy polyamide cured finish paint. Recommended Use :- It is recommended as a top coat for structures, pipelines, vessels, equipments and machineries, storage tanks etc. in fertilizers and chemical plant, cement plants, power plants, steel plants, pharmaceutical and petrochemical complexes, refineries etc. Product is also recommended for application over suitable primer for OEM industry like machine tools, pumps, machineries, transformers etc. Physical Data COLOUR : Assorted Shades FINISH : Semi glossy SOLIDS BY VOLUME : 40 �± 3% (Depends on shade) THEORETICAL SPREADING RATE : 13.33 sq.mt / ltr at recommended DFT of 30 �µ FLASH POINT : Base: Above 23�° C Hardener: Above 23�° C DRYING CHARACTERISTICS : SURFACE DRY : 90 minutes max HARD DRY : Overnight FULL CURE : 7 Days SHELF LIFE : BASE : 6 months HARDENER : 6 months Surface Preparation This being a topcoat, which is applied over, primer or intermediate coats, the surface should be free from oil, moisture, dust and dirt. Aged epoxy / PU coating should be roughened by emery paper grade 400 / 600 for better bonding. Application Data :- MIXING RATIO : Base : Hardener (As per our recommendation) APPLICATION : By Brush / By Conventional Spray / By Airless Spray THINNER : 190 POT LIFE : 4-6hrs min at 30 �° C RECOMMENDED DFT : 30-40 �µ OVER COATING INTERVAL : MIN : 8 hours MAX : 24 hours COMPATIBILITY : Can be over coated with PU, Chlorinated rubber and synthetic enamel paints.
Pvc doors, doors with mdf molded door skins- with grains, white enamel painted, melamine faced, natural wood veneer, artificial veneer. Steel security doors. Flush doors Solid wooden doors with: oak, red cherry, sapelli, golden teak, merbau, walnut, rosewood, teak etc. Various panel designs. Door with frame. Moulds (casing).
Ritver Tweed Grey Primer Is A Special Primer With Moisture Sealing Qualities