Spray adhesive 600ml/can 24cans/carton
Silicone sealantrubber is gernerally used in sealing door, windows, showcase, demonstrate frame, signboards. Recommended especially fit in application of design of interior / exterior decorations 300ml/pc 200kg/drum
Sprayable Adhesive System.
The heating apply one-part adhesive and sealant for interior and exterior application,remain permanent flexibility and good weather properties. It is ideal for use sealing gaps of containers, automotives, buildings and various appliances.
Product Description PU Selanthigh modulus sealant, it can cure on exposure to atmospheric moisture to form elastomeric mastic. It has excellent adhesion on glass and metal, it is most suitable for bonding windshield in the automotive industry. It functions good on automotive windscreen, windows and scuttles. Application: PU Sealant is used for sealing for automotive windows windshield assembly, body assembly and other components. It widely suitable forsealing in automotive, caravan, ship building and railway industry. It is also suitable for sealing, seam sealing, simple bonding as well as for vibration reduction and sound deadening measures in crash body repair and car body construction. Product Specification: Description Specification Appearance: Black, smooth paste Solid Content 99% Flash Point > 230°F(110°C) Weight per volume 9.9 lbs/gal Specific gravity 1.2 gm/ml sag none Ordor minimal Tack-Free Time skins in 10 minutes
Product Description PU Selanthigh modulus sealant, it can cure on exposure to atmospheric moisture to form elastomeric mastic. It has excellent adhesion on glass and metal, it is most suitable for bonding windshield in the automotive industry. It functions good on automotive windscreen, windows and scuttles. Application: PU Sealant is used for sealing for automotive windows windshield assembly, body assembly and other components. It widely suitable forsealing in automotive, caravan, ship building and railway industry. It is also suitable for sealing, seam sealing, simple bonding as well as for vibration reduction and sound deadening measures in crash body repair and car body construction. Product Specification: Description Specification Appearance: Black, smooth paste Solid Content 99% Flash Point > 230°F(110°C) Weight per volume 9.9 lbs/gal Specific gravity 1.2 gm/ml sag none Ordor minimal Tack-Free Time skins in 10 minutes
Hot melt sealant information: Colour:Black. Density:1.16g/m³. Extruding temperature:160-185. PPacking units:5kg/pc,30kg/box,Further packaging units on requst. Characteristics: Very low water vapor and gas permeability improved temperature resistance in the insulating glass,Optimisted adhesion to glass and the fine sealant due to additional chemical bonding.Fast cooling and quick drying soon. Application guide: 1.Process is simple with good sealing effect. 2.Save storage,sealant immediately installation of glass after sealing. 3.Non-toxic tasteless,clean production environment. 4.Low cost,can reduce production temperature range:10-40.
Product description: Large expansion Pu foam sealant is an one-component,self-expanding,multipurpose polyurethane foam.This foam will expand and cure by moisture in the air.It is used for a wide range of building applications.It is very good for filling and sealing with excellent mounting capacities,high thermal and acoustical indulation.Higher expansion rate than normal Pu foam. Advabtage: (1)Can apply around 70 meters(30mm*15mm). (2)Most cost effective for each window or door. (3)No shrinkage and craking after cured. (4)Better adhesion and harder. Construction guide: (1)Shake can vigorously for one minute before use. (2)Clean and pre-moisten surface before use. (3)Firmly screw can on adapter,and turn the flow adjustment screw anticlockwise. (4)Fill vertical joints from the bottom up whenhalf filled enough. (5)Foam begins to cureabout ten minutes,wait for one hour before doing the next step. (6)Use knife to smooth out cured foam and treat surface with cement paint or silicone. Usage scenario: Wide range of applications,including:mounting,sealing,filling and onsulating General purpose one-compoent polyurethane foam suitable for filling,insulating,sealing,mounting,caulking,stopping and soundproffing of large and small holes in cocrete,plaster,brick,floorboards,glass or wood.It is specially recommended for mounting of windows and doorframes,heat insulation of sewerage and central heating,fixing and isolating of wall panels and more ecification.
Butyl sealant information: Material:Butyl rubber. Colour:Black. Introduction: It is one-part,solvent free.No cracking in a wide temperature range.It has good adhesion to glass,aluminum alloy,zinc plating steel,stainless steel and etc.It can offer aan excellent humidity proof system with elasticity. 1.Appearance:homogeneous black putty. 2.Odor:odorless. 3.Density:1.06g-1.29g/cm³. 4.Suitable temperature:-40+80,keep the surface and edges from cracking and sagging. 5.Extruding temperature:about 120~150
Product features: 1.Single group,deac etate,room temperature curing silicone glass glue. 2.Fast curing speed and easy to use. 3.Good bonding performance with most building materials. 4.Superior thixotropy with no seasonal restrictions. The main purpose: 1.All kinds of glass projects are bonded and sealed. 2.All kinds of glass doors and windows are sealed. 3.All kinds of interior decoration and sealing.
Hot Melt Glue Belt - 9mm to 19mm light twisted high tensile yarns, glue coated Hot-melt glue strapping is the basis of current polyester strappings. Hot-melt has been applied for many years in all industrial branches and are gentle on delicate edges and surfaces. special for agriculture and waste management industry. Specifications No damage to delicate surfaces since it is a textile material No corrosion and its easy to handle Low investment cost Retensionable in case of volume loss of the packaging goods No risk of injury for shippers and consignees when using or opening the strapping system. High breaking load Dynamic transport movements are absorbed by the elasticity of the strapping Easy disposal Weatherproof (UV radiation)
The stainless steel solder paste FIFO adopts the automatic slide double inlet design, which can store 72 bottles and two kinds of solder paste free label management. It meets the electronic enterprise with large amount of solder paste, saving 10% of the cost. Product Code: SMB10SUA-000-R6; Material: 304 stainless steel + acrylic transparent side plate; Solder paste storage capacity: 72 bottles; Product size: 173 * 443 * 995mm; Number of groups: single group; Packing: wooden frame packaging.
Solder paste FIFO fixture processing factory 17 years of processing experience, long-term partners of the top 500 companies, dozens of non-standard custom use case technology mature and stable, high praise rate, that is, buy and use free design fee for your provincial 10% cost . Product Code: SMF10B20-000-R0; Material: abs engineering plastic + aluminum plate; solder paste storage volume 74 bottles; Product size: 900 * 400 * 207 mm; Layers: double layer; Packing: wooden frame packaging.
Small stainless steel FIFO uses slide-type design solder paste for automatic first-in, first-out, label-free management, saving a labor cost. Double row double outlet 48 bottles of solder paste storage, can manage 2 brands of solder paste. Product Code: SMB10SUA-000-R4; Material: 304 stainless steel; Solder paste storage capacity: 48 bottles; Product size: 171.5*443*701mm; Number of groups: single group; Packing: wooden frame packaging.
The double-layer solder paste slide is the FIFO of Donghongxin. It was jointly developed by Huayang General Group in 2012. After 7 years of continuous optimization and improvement, it saves time and effort and saves money.
FEATURES Elastic attachment adhesive for disposable hygiene products. excellent creep performance on all types of elastic, especially synthetic rubber. Has excellent adhesion to PE, PP and NW. also can be applied as a construction adhesive. APPLICATION For NONWOVEN SIDE TAPE PRODUCTION STORAGE Store in a dry place where the temperature is below 40ºC and the storage life is one year. PRECAUTIONS 1.Do not mix with other adhesives. 2.Keep containers and pre-melters covered to avoid contamination. 3. Material is applied hot. Appropriate clothing and eye protection should be used. 4. Rotate stock - first in, first out. APPEARANCE Light Yellow Solid SOLIDS 100%
USD650/T FOB shanghai.This is Heaven Zhu from Chemix Specialty Chemical Co.,ltd(C.S.C), in China. We are promoting 98% Calcium Formate on construction grade.
Loctite 510: Gasketing Product- high temperature and chemical resistance. Ideal for use on rigid flanges Loctite 515: Gasketing product for machined metal flanges. Medium strength. For gaps up to 0.25 mm. 30 min fixture time Loctite 518: Medium-strength, general purpose gasketing product - excellent contamination tolerance. Ideal for use on casted iron, steel and aluminum flanges. Loctite 573: Surface sealant- slow curing. Ideal for sealing of machined, rigid metal flanges. Loctite 574: Gasketing Product - general purpose. Ideal for use on machined and rigid metal flanges.
Loctite liquid thread sealants seal and secure metal pipes and fitting, the space between threaded metal parts, and hardening to prevent leakage. Designed for low and high pressure applications, liquid thread sealants seal instantly for low pressure testing. When fully cured, they seal to the burst strength of most piping systems Packing size: 10ml/50ml/250ml Dear friends: Thanks for your interesting in our Products. Anything please leave me a message on the end of this page ,or email with me directly when you are free. we will try my best to find the best solution for you. Your cooperation partner in china. Best regards, Ms.Max Cheng Sales manager Dalian Roselie Trade Co.,Ltd Add:No.291,Huabei Road,Ganjingzi District,Dalian City,Liaoning Province,China Skype:jxmarvel-Max Whatsapp:+86 18379204630 Email: max@jxmarvel.com
Specifications Type: Shoe Linings Place of Origin: Fujian, China (Mainland) Brand Name: Kinghope Model Number: HAM-001 Material: Insoles Facotory location: Wuli industry zone,Jinjiang city Factory size: 3000 Meter/Meters pk fabric Key words: shoe lining,shoe inner lining,polyeser fabric Sample: free sample Contact person: eunice Skype: zhhshoes3 Color: white or others Size: 0.87m*1y or custom made Thickness: 0.45mm-1.2mm or custom made Packaging & Delivery Packaging Details: in piece or in roll Delivery Detail: 3-7 days Thickness: 0.45mm,0.6mm,0.8mm, 0.9mm, 1.0mm, 1.1mm, 1.2m or customize Specification: 0.87m�1Y or customize Color: White, yellow and others Functions: 1. Good elasticity, Easy to shape, Inflection resistant. 2. Low operation temperature, Usage temperature is 65-75°C 3. Keep strong glueyness after repeated usage, Environment-friendly. Applications: Mainly used for upper and heel of sports and leather shoes. we are manufacture,we produce PO,PES,PA ,TPU,EVA hot melt adhesive film ,widely used for bonding kinds of products, cool water soluble film,embroidery backing film our products price are lower than others,if you should import,we are the best chioce for you ,the sample is free for you,but the express fee is paid by the import We can supply you with suitable hot melt adhesive film according to the sticking fastness, washability and flammability.There are many styles for you to choose from. Normal hot melt adhesive films include PA,PO,PU,PES.Our products are of 0.06-0.20 thickness and 50cm width.Hot melt adhesive film is similar to double-sided adhesive,under which there are a layer of anti-adhesive paper.Hot melt adhesive film will work after being heated by press hot machine,compound machine,high-frequency machine ,etc.There are many choices for you since the melting point of our products vary form 70-160 degree centigrade.
