Dyo epoxy enamel Excellent adhesion and abrasion resistance. High resistance against chemicals, sea-water, mineral oils. Its high thixotropic nature provides it to be applied as thick layer. It resists temperature up to 150 c degrees without change in colour. Packaged in 22 kg can
Dyo pu topcoat fd 2k polyurethane fast drying(fd) alkyd based car repair and vehicle paint. Has gloss, semi gloss, gloss retention, high mechanical and chemical resistance and high flexibility. Has resistance against gasoline, adverse weather conditions, industrial air pollution and salt spray. Packaged in 18 kg can
Dyo hb epoxy primer Excellent adhesion over galvanized surfaces. High resistance against corrosion, hummidity and chemicals. Its high thixotropric nature provides it to be applied as thick layer. It resists temperature up to 150 c degrees without change in colour. Drying speicifications: 8 h at 20 c degrees 50 min. At 80 c degrees 30 min. At 100 c degress 20 min. At 140 c degrees Packaged in 24.5 kg can
1 k dyo - pox primer It is used as air drying primer on iron and steel surfaces and also light metals. Air drying syntetic, oven drying topcoat can be applied. Drying specifications: Thorough drying 20 mins. At 20 c degrees Hard drying 72 hours at 20 c degrees Packaged in 22 kg cans.
Acryflex t The tennis court system In 2001, boytem concluded its research and development project and in 2002 was the first and only company in turkey to produce a 100 % acrylic latex-based tennis court surfacing system according to the itf standarts. The acryflex-t is a durable, uv resistant and mult¦-purpose flooring product developed whit the newest technology for acrylic polymers.It is applicaple on asphalt and concrete surfaces and is appropriate for slow and medium speed games. Acryflex t tennis court system components 1- acrylic primer 367-28 2- acrylic resurfacer 367-30 3- unirubber 367-40 (cushion) 4- pre-coating 367-200 5- glosscoat (acrylic clear topcoat) 6- overline (acrylic paint for court marking) 7- acrypatch (acrylic repair binder)
Spark 401 Very good resistant for big quantities of priting and ggod for fine designs 5 kg+diazo
Waterstop 4110
Waterproof coating
Anti-slip coatings and treatments for every slippery
AKFIX 1044 is a very fast set, 2-component, 100% solid flexible coating derived from a reaction of an isocyanate prepolymer and an amine terminated resin blend. This general purpose aromatic pure polyurea has been especially designed to protect and coat concrete, metal, wood, ceramic, geotextile surfaces. The product reacts within seconds and once cured, leaves a flexible, durable, tough surface. Its extremely fast gel time makes it suitable for applications down to -20 �°C without special conditioning of the component resins and isocyanates. It is relatively moisture and temperature insensitive, allowing application in the most problematic ambient conditions. The material must be applied utilizing high pressure, heated plural component spray proportioning equipment. %100 solid, VOC free, no solvents No catalyst Fast reactivity and fast return to service time Seamless and joint-less coating Little or no odor Excellent thermal stability Water resistant Excellent adhesion on concrete, steel, aluminum, plastics, fibers, wood, foam etc. Excellent flexibility Non sensitivity to temperature and humidity Excellent chemical resistance Excellent impact and abrasion resistance Anticorrosive Very good tensile and structural strength UV, chlorine and saltwater resistant High application thickness possible Variable application thickness possible Broad color spectrum
Methyltrichlorosilane - cas 75-79-6. Monthly purchase –80 tons Colorless (clear) liquid with a pungent odor, hydrolyzable with air moisture. Reacts with ethanol. Physico-chemical properties of methyl trichlorosilane The molecular weight 149.5 Density, g / cm3 1, 277 Mass fraction of basic substance, at least 99.6% Mass fraction of chlorine, %, not less than 71.2 Mass fraction of impurities, 0.4% Including - trimethylchlorosilane, not more than 0.05% Including - dimethyldichlorosilane, not more than 0.4% Including - 2, 2, 3-trimethylbutane and 2.4 dimethylpentane, not more than 0.05% Boiling point, ° c 66, 4 Melting point, ° c -90 Auto-ignition temperature, ° c 408 Flash point, ° c 6 The refractive index of 1.4110 Methyl silica gel cas 68554-70-1 monthly purchase – 20-25 tons Physical and chemical properties Name of parameter, measuring unit Appearance, color Hard, wet, white, fine granulated product Testing item Quality index Measured value Mass content of hydrogen chloride, %, no more 1, 0 0, 96 Mass content of nonvolatile substances, %, at least 60, 0 62, 0 Usage - production of polymer silicone products. Standard
Packaging options: 20 ml jar (available for a palette of 70 colors) Wholesale from 1 kg (available palette of 1950 colors)
Desoprime is an epoxy polyamide primer of two components with zinc phosphate as a preventive dye of the corrosion. When dried completely it creates a rust - resistant ,high strength coating.It is used as an epoxy primer for general use according to the painting instructions.
Desmofen is an acrylic polyurethane coating with two-component poly-gloss aliphatic isocyanate hardening .It has remarkable gloss and colour-shade.It is used as a polished finish for alluminium ,steel ,reinforced polyester and wood in a highly corrosive atmospheric environment.
Setapol 260 1C is an elastic coated polyurethane membrane of one component for long-lasting waterproofing.It has hydrophobic resistance to sun and frost while it is breathable with anti-corrosion properties.Setapol 260 1C is ideal for the sealing of roofs , balconies ,rooms , gardens , pots and for the protection of thermal insulation foam polyurethane. It also has coverage of 1.5 - 2.0 kg / m2 in two or three layers.
Setapol 450ML 1C is an elastic paint of aliphatic polyurethane base of a component with good mechanical strength.It has a particularly high resistance to sun and frost.There is also no yellowing on the surface.Setapol 450ML 1C is ideal as a finishing coat resistant to light alloys.
Desnamel Fast Dry is a fast -drying alkydic final coating with good gloss and preservation of hue.It is used as a primer as long as a final coating for steel in a slightly corrosive environment.
Desmopol Topcoat is a semi-acrylic polyurethane coating of two-components aliphatic isocyanate with good gloss .It is used as a final coating for the protection of structural steel in extremely corrosive environment, when light steadiness and preservation of the gloss is required.The minimum heat for drying is -10
Setapol 400ML 1C is an elastic paint of aliphatic polyurethane base of a component with good mechanical strength.There is no yellowing on the surface.Setapol 400ML 1C is ideal as a final sealant on moderate pedestrian traffic surfaces.It has coverage of 0.15 - 0,25 kg / m2 in two or three layers.
Setapol 400ML 1C is an elastic paint of aliphatic polyurethane base of a component with good mechanical strength.There is no yellowing on the surface.Setapol 400ML 1C is ideal as a final sealant on moderate pedestrian traffic surfaces.It has coverage of 0.15 - 0,25 kg / m2 in two or three layers.
