graphite ore
Laxogenin is a plant based steroid. It can be found in small quantities of green (plant based) foods. It is derived from a certain plant (smilax sieboldii) and promotes anabolic activity within the body.But no side effects or potential health risks is found yet. More information of Isophorone CAS:78-59-1 1)Used as an intermediate in manufacturing mainly polyurethane field compounds such as isophorone Diamine, isophorone Diisocyanate, Trimethylcyclohexanone used for Light stable weather resistant urethane coating. 2)It is used as a solvent for resin, lacquers,inks & PVC. 3)It is used in formulating Pesticides, Herbicides. 4)It is used in vinyl chloride/acetate-based coating systems for metal cans, other metal paints,nitrocellulose, and printing inks for plastics.
Product:Maqui berry Extract Ratio:4:1;10:1;20:1;50:1;100:1 Appearance: Reddish-purple Fine Powder Source Origin:Brazil Loss on Drying:
Natural zeolite is a new material, which is used as ion exchange agent, adsorbent, desiccant, catalyst and cement mixture. In petroleum and chemical industry.separation and storage agent hard water softening, seawater desalination agent. In the aspect of environmental protection, it is used to treat waste gas and waste water, remove or recover metal ions from waste water and remove radioactive pollutants from waste water. Main specifications: 1-3mm,3-5mm,>5mm;200mesh,325mesh
Product Grade: AAA Black, plump and pliable Premium Black Vanilla Vanillin: 1,6 - 2,4% Moisture: 18-30% Length: 16-17cm (approx 6-7 inches) Vanillin Content: 1.9-2% Color: Dark Brown, almost Black Botanical Name: Vanilla Planifolia (BOURBON) Fragrance: Strong full rich Vanilla aroma Appearance : soft, fragrant,flexible vanilla beans Name good quality vanilla bean Grade AAA Features No speckle, no mould, No heavy metal, no pesticide, Hand selected Color Black Size 10-20cm Admixture 1% max Packing Bulk or Tube or at your requests Moisture 14% max Samples Free or available
Functions and characteristics 1) Enhance plant vigor, improve quality of crop products, and increase yield 2) Enhancing the ability of water absorption and maintenance and resistance to drought and cold 3) Enhancing the resistance to pests and diseases and stresses 4) Effective soil amendment It can enhance the soil's water maintenance ability by 10 times, activate microelements in soil, improve the development of roots. Precautions 1) Strictly select the dosage and application timing. 2) Do not use together with alkaline pesticides. 3) The best application time should be after dew dry in the morning or after 4 oâ??clock in the afternoon, on clear days. Re-apply if it rains within 4 hours after application. 4) Do not store ini metal container. Store under shady and cool place, and avoid direct sunlight.
Honey as a high viscosity gel fluid, in which the acidic components can react with the metal container and cause corrosion, in addition, the honey is susceptible to seasonal and temperature effects, the summer temperature is too high, resulting in most of the honey in the conversion of sugar Acid, storage time is limited; winter undercooling (15 â?? below), honey is not easy to complete the crystallization of its impact and quality uniformity, to the honey transport, storage and food to bring a lot of inconvenience. Honey will be made of honey after the dry powder, both to retain the nutritional value of liquid honey, but also to facilitate long-term transport and storage and deep processing and later use. The success of the research and development of honey powder has greatly enhanced the depth and breadth of the natural products used in the food processing industry,expanded the scope of use of natural honey and fundamentally solved the problem that the liquid honey is difficult to use and can not guarantee food safety.
Products Description Glycerol is a colorless, viscous, hygroscopic, sweet-tasting trihydric alcohol. It is also called glycerin or glycerine, with the term glycerol being preferred as the pure chemical form and the term glycerin(e) being primarily used when the compound is used commercially in various grades. Application 1) In medicine, it is used to making various preparations, solvent, hygroscopic agent, antifreeze and sweeteners, preparation for external use ointment or suppository, with glycerol nitroglycerin used for explosive materials. 2) In the coatings industry, it is used for making all kinds of alkyd resin and polyester resin, epoxy resin and glycidyl ether. 3) In textile and printing industry, it is used for preparing wetting agent hygroscopic agent, fabric anti-creasing shrink proof treatment agent, dispersant and penetrating agent. 4) In the food industry , it is used as sweetener, tobacco hygroscopic agent and solvent. 5) In addition, in the paper, cosmetics, leather, photography, printing, metal processing rubber and other industries widely application.
Product Name Pine Oil Purity 85% CAS 8002-09-3 EINECS 232-688-5 FEMA NA Appearance light yellow to deep lemon liquid Application 1 Pine oil is a liquid mixture of macromolecular hydrocarbons distilled from pine roots at 240 ~ 400 C. 2 Pine oil is easy to dissolve in organic solvents such as ether, ethanol, soluble in glacial acetic acid, sodium hydroxide and other solutions, but difficult to dissolve in water. 3 Used as a foaming agent for metal flotation, a solvent for paint and ink, and a penetrating agent for textile industry. 4 Used as mineral processing agent, textile industry degreaser, printing and dyeing auxiliaries,etc. 5 Used as rubber softener, wood preservative, mineral flotation, felt, paint, plastics, etc. 6 Used in industry clean and wash, car wash etc
Ice cream is a popular dessert specially in hot summer. Our Ice cream powder, with high quality milk powder, different flavors, different grade, is the best choice for you to make soft ice cream or hard ice cream. process steps 1.powder:water=1.2:1 2.put powder and water into a metal pan 3.mix the powder and water 4.mix the powder and water until they dissolve well 5.whip 4-5 miniutes,then thick cream is done. Ingredient: vegetable oil, sodium caseinate, glucose syrup, after high-pressure homogenize emulsification, spray and dry. Packing: 25 kg net weight per craft paper bag with poly bag liner inner. Storage: Store in dry & sheltered warehouse with good ventilation away from strong odours and direct sunlight.
Oxalic Acid Property: White transparent crystal combining two crystal water, melting point: 101-102oC, specific gravity:1.653,easily sublimate at 100oC, easily dissolve in alcohol and water. CAS NO.: 6153-56-6 Molecular Formula: H2C2O4.2H2Oint: 101-102 ºC Application: Metallurgy: Industry: as precipitating and resolving agent for rare earth metal, etc. Organic synthesis: for 2123 resin, urea fform aldehyde powder, etc. Light Industry: Polish of mable, removing rust, bleaching products of leather, wood and aluminium,etc. Printing Industry: to be used as dyeing agetn. Medicine Industry: for making tetracydine, HCl, etc. Others: as laboratory agent, solvents activator and basic materials for chemical industry. Packing: In 25kgs plastic woven bags.
We are a group of companies and one of the prominent traders and suppliers of varied collection of commodities. We have constantly evolved to create a richly diversified line of products from some of the most reputed fields across Africa. Our products are procured from authorized vendors and are in total compliance with set industry norms. On behalf of the Management of Alpha Metal & Chemical Solutions hereby termed as the seller and with full corporate authority and responsibility certifies, represents and warrants to inform you that we are ready, willing and able to supply under the penalty of perjury, the following commodity with its specifications mentioned below. Product Name : Rail Scrap (R50, R65 & HMS) Material : Iron Metal Scrap Application : Melting/Industrial Use Quantity : Agreed shipment/Bulky 50,000 Metric Tonnes Current location : Kenya Country of Origin: Colonial Price :$195 Per Tonne (Negotiable) Contract : CIF Loading Port : Mombasa Delivery : Immediately contract signed by both parties Port Destination : TBA Payment : By TT within 48 hours after delivery and final analysis at the final destination port CHEMICAL COMPOSITION: SCRAP/RAILROAD FERROUS SCRAP (R50/R65) R50 GOST 7173-75 : Weight 51.67 KG/Meter R65 GOST 8165-75 : Weight 64.72 KG/Meter C : 0.60 -0.82% Mn : 0.75 1.05% Si : 0.13 0.28% P : Max 0.035% S : Max 0.045% Ar : Max 0.051% PROCEDURE: 1. Seller issues the FCO 2. The buyer physically inspects the goods in Kenya 3. After client�¯�¿�½?�?�¢??s satisfaction, buyer and seller enter into a contract according to their own agreement. 4. Upon signing of the contract, the buyer will cater for the goods insurance, logistics and cutting charges summing to at least 10% of the whole contract value. 5. Note that the above charges are deductible from the final invoice value and the remaining balance of 90% is to be paid in negotiations with some after documentation including Bill of Lading and some balance after the goods arrive to the buyer�¯�¿�½?�?�¢??s final destination port. i.e. (Terms are Negotiable)' 6. After loading, the seller/representative will travel together with the buyer to assist and witness discharge/offloading and to control the wire transfer of the final payment to be made to seller�¯�¿�½?�?�¢??s nominated bank account within 48 hours after receipt of the final assay report from buyer�¯�¿�½?�?�¢??s inspection. 7. In future quantities, seller shall notify the buyer of availability and the above procedure will be repeated. DOCUMENTATION: - Commercial Invoice, - Insurance, - Certificate of Origin, - Export permit/Certificate, - Ownership certificate, - Customs Clearance Certificate (Taxes) - Packing list - Bill of Lading
We are a group of companies and one of the prominent traders and suppliers of varied collection of commodities. We have constantly evolved to create a richly diversified line of products from some of the most reputed fields across Africa. Our products are procured from authorized vendors and are in total compliance with set industry norms. On behalf of the Management of Alpha Metal & Chemical Solutions hereby termed as the seller and with full corporate authority and responsibility certifies, represents and warrants to inform you that we are ready, willing and able to supply under the penalty of perjury, the following commodity with its specifications mentioned below. Product Name : Rail Scrap (R50, R65 & HMS) Material : Iron Metal Scrap Application : Melting/Industrial Use Quantity : Agreed shipment/Bulky 50,000 Metric Tonnes Current location : Kenya Country of Origin: Colonial Price :$195 Per Tonne (Negotiable) Contract : CIF Loading Port : Mombasa Delivery : Immediately contract signed by both parties Port Destination : TBA Payment : By TT within 48 hours after delivery and final analysis at the final destination port CHEMICAL COMPOSITION: SCRAP/RAILROAD FERROUS SCRAP (R50/R65) R50 GOST 7173-75 : Weight 51.67 KG/Meter R65 GOST 8165-75 : Weight 64.72 KG/Meter C : 0.60 -0.82% Mn : 0.75 1.05% Si : 0.13 0.28% P : Max 0.035% S : Max 0.045% Ar : Max 0.051% PROCEDURE: 1. Seller issues the FCO 2. The buyer physically inspects the goods in Kenya 3. After client�?�¢??s satisfaction, buyer and seller enter into a contract according to their own agreement. 4. Upon signing of the contract, the buyer will cater for the goods insurance, logistics and cutting charges summing to at least 10% of the whole contract value. 5. Note that the above charges are deductible from the final invoice value and the remaining balance of 90% is to be paid in negotiations with some after documentation including Bill of Lading and some balance after the goods arrive to the buyer�?�¢??s final destination port. i.e. (Terms are Negotiable)' 6. After loading, the seller/representative will travel together with the buyer to assist and witness discharge/offloading and to control the wire transfer of the final payment to be made to seller�?�¢??s nominated bank account within 48 hours after receipt of the final assay report from buyer�?�¢??s inspection. 7. In future quantities, seller shall notify the buyer of availability and the above procedure will be repeated. DOCUMENTATION: - Commercial Invoice, - Insurance, - Certificate of Origin, - Export permit/Certificate, - Ownership certificate, - Customs Clearance Certificate (Taxes) - Packing list - Bill of Lading
We are a group of companies and one of the prominent traders and suppliers of varied collection of commodities. We have constantly evolved to create a richly diversified line of products from some of the most reputed fields across Africa. Our products are procured from authorized vendors and are in total compliance with set industry norms. On behalf of the Management of Alpha Metal & Chemical Solutions hereby termed as the seller and with full corporate authority and responsibility certifies, represents and warrants to inform you that we are ready, willing and able to supply under the penalty of perjury, the following commodity with its specifications mentioned below. Product Name : Rail Scrap (R50, R65 & HMS) Material : Iron Metal Scrap Application : Melting/Industrial Use Quantity : Agreed shipment/Bulky 50,000 Metric Tonnes Current location : Kenya Country of Origin: Colonial Price :$195 Per Tonne (Negotiable) Contract : CIF Loading Port : Mombasa Delivery : Immediately contract signed by both parties Port Destination : TBA Payment : By TT within 48 hours after delivery and final analysis at the final destination port CHEMICAL COMPOSITION: SCRAP/RAILROAD FERROUS SCRAP (R50/R65) R50 GOST 7173-75 : Weight 51.67 KG/Meter R65 GOST 8165-75 : Weight 64.72 KG/Meter C : 0.60 -0.82% Mn : 0.75 1.05% Si : 0.13 0.28% P : Max 0.035% S : Max 0.045% Ar : Max 0.051% PROCEDURE: 1. Seller issues the FCO 2. The buyer physically inspects the goods in Kenya 3. After client�?�¢??s satisfaction, buyer and seller enter into a contract according to their own agreement. 4. Upon signing of the contract, the buyer will cater for the goods insurance, logistics and cutting charges summing to at least 10% of the whole contract value. 5. Note that the above charges are deductible from the final invoice value and the remaining balance of 90% is to be paid in negotiations with some after documentation including Bill of Lading and some balance after the goods arrive to the buyer�?�¢??s final destination port. i.e. (Terms are Negotiable)' 6. After loading, the seller/representative will travel together with the buyer to assist and witness discharge/offloading and to control the wire transfer of the final payment to be made to seller�?�¢??s nominated bank account within 48 hours after receipt of the final assay report from buyer�?�¢??s inspection. 7. In future quantities, seller shall notify the buyer of availability and the above procedure will be repeated. DOCUMENTATION: - Commercial Invoice, - Insurance, - Certificate of Origin, - Export permit/Certificate, - Ownership certificate, - Customs Clearance Certificate (Taxes) - Packing list - Bill of Lading
We are a group of companies and one of the prominent traders and suppliers of varied collection of commodities. We have constantly evolved to create a richly diversified line of products from some of the most reputed fields across Africa. Our products are procured from authorized vendors and are in total compliance with set industry norms. On behalf of the Management of Alpha Metal & Chemical Solutions hereby termed as the seller and with full corporate authority and responsibility certifies, represents and warrants to inform you that we are ready, willing and able to supply under the penalty of perjury, the following commodity with its specifications mentioned below. Product Name : Rail Scrap (R50, R65 & HMS) Material : Iron Metal Scrap Application : Melting/Industrial Use Quantity : Agreed shipment/Bulky 50,000 Metric Tonnes Current location : Kenya Country of Origin: Colonial Price :$195 Per Tonne (Negotiable) Contract : CIF Loading Port : Mombasa Delivery : Immediately contract signed by both parties Port Destination : TBA Payment : By TT within 48 hours after delivery and final analysis at the final destination port CHEMICAL COMPOSITION: SCRAP/RAILROAD FERROUS SCRAP (R50/R65) R50 GOST 7173-75 : Weight 51.67 KG/Meter R65 GOST 8165-75 : Weight 64.72 KG/Meter C : 0.60 -0.82% Mn : 0.75 1.05% Si : 0.13 0.28% P : Max 0.035% S : Max 0.045% Ar : Max 0.051% PROCEDURE: 1. Seller issues the FCO 2. The buyer physically inspects the goods in Kenya 3. After client�¢??s satisfaction, buyer and seller enter into a contract according to their own agreement. 4. Upon signing of the contract, the buyer will cater for the goods insurance, logistics and cutting charges summing to at least 10% of the whole contract value. 5. Note that the above charges are deductible from the final invoice value and the remaining balance of 90% is to be paid in negotiations with some after documentation including Bill of Lading and some balance after the goods arrive to the buyer�¢??s final destination port. i.e. (Terms are Negotiable)' 6. After loading, the seller/representative will travel together with the buyer to assist and witness discharge/offloading and to control the wire transfer of the final payment to be made to seller�¢??s nominated bank account within 48 hours after receipt of the final assay report from buyer�¢??s inspection. 7. In future quantities, seller shall notify the buyer of availability and the above procedure will be repeated. DOCUMENTATION: - Commercial Invoice, - Insurance, - Certificate of Origin, - Export permit/Certificate, - Ownership certificate, - Customs Clearance Certificate (Taxes) - Packing list - Bill of Lading
Iron ores are the raw material used to make iron and steel. Iron ore production has significantly expanded in recent years, owing to increasing steel demands in developing countries, such as China. As the content of iron ore in deposits has deteriorated, low-grade iron ore has been processed. Iron ore concentrate is an output product from processed iron ores that have been milled (crush, grind, magnetic separation, flotation) to separate deleterious elements and produce a high-quality product. Sintering and pelletizing are economic and widely used agglomeration processes to prepare iron ore fines/iron concentrate for ironmaking use. The quality requirements of sinter and pellet, such as physical, chemical, and metallurgical specifications, depend on each ironmaking furnace, and those requirements influence the operation of the iron ore sintering and pelletizing plant. Researchers have usually focused on the effect of the chemical, physical, and mineralogical characteristics of iron ore on these steps and the consequences for sinter/pellet quality and sintering/pelletizing performance. The present Special Issue on â??Iron Concentrate Particlesâ?? will summarize the progress achieved in the last five years.
Our iron ore pellets and fines are made from magnetite and have high iron ore content â?? pellets at around 67 percent concentration and fines over 70 percent. This means they have lower impact on the environment than competing pellets and products such as sintered hematite fines. Using pellets instead of sinter (slightly larger pieces of iron ore) in customersâ?? pig iron processes saves emissions at steel plants. The high concentration of iron combined with the carefully tested and balanced additives in our pellets also result in lower emissions in customersâ?? ironmaking processes.
A billet is a length of metal that has a round or square cross-section, with an area less than 36 in2 (230 cm2). Billets are created directly via continuous casting or extrusion or indirectly via hot rolling an ingot or bloom. Billets are further processed via profile rolling and drawing. Final products include bar stock and wire. Centrifugal casting is also used to produce short circular tubes as billets, usually to achieve a precise metallurgical structure. They are commonly used as cylinder sleeves where the inner and outer diameters are ground and machined to length. Because their size is not modified significantly, they are not always classified as semi-finished casting products.
A billet is a length of metal that has a round or square cross-section, with an area less than 36 in2 (230 cm2). Billets are created directly via continuous casting or extrusion or indirectly via hot rolling an ingot or bloom. Billets are further processed via profile rolling and drawing. Final products include bar stock and wire. Centrifugal casting is also used to produce short circular tubes as billets, usually to achieve a precise metallurgical structure. They are commonly used as cylinder sleeves where the inner and outer diameters are ground and machined to length. Because their size is not modified significantly, they are not always classified as semi-finished casting products.
A billet is a length of metal that has a round or square cross-section, with an area less than 36 in2 (230 cm2). Billets are created directly via continuous casting or extrusion or indirectly via hot rolling an ingot or bloom.[1][2][4] Billets are further processed via profile rolling and drawing. Final products include bar stock and wire.[3] Centrifugal casting is also used to produce short circular tubes as billets, usually to achieve a precise metallurgical structure. They are commonly used as cylinder sleeves where the inner and outer diameters are ground and machined to length. Because their size is not modified significantly, they are not always classified as semi-finished casting products.
