100% cleaned properly and well dressed. No bruises . No blood. No bad smell . No feathers . No broken bones. Stored in 5 boxes or 10 boxes height kept at -18 ° C. Transported in an insulated container and cold generating equipment to the final destination . No Keratin feet larger than 2 cm and tolerance of up to 5% smaller than 2 cm. No feet fractures/exposed with a tolerance of up 3%. Stored in five (5) boxes or ten (10) boxes height. Kept at -18°C.
Our machine is using to cutter and separate cocoa. Find youtube our videos:
Orthodontic force gauge The zeusan force gauge or dinamometer is designed specifically for orthodontic use, with an ergonomic pontier and measurement up to 300grams. Precise measurement of elastics and springs is essential for better results in orthodontics. Contact us if you are interested in. Available for exportation. Doesn¦t need ce mark for the european union. It is acompanied with a plastic transparent protective case of 9.5cm x 5cm, weight: 110gr If you prefer special anatomic protection case weight 240gr, size 14cm x 7cm x 5cm
Weldet orthodontic bracket Material: chirurgical stainless steel 17-4 ph Bracket type: vetor (weldet) Characteristics that make a diference Size reduction up to 30% More aesthetic Deformation resistance Basis and body perfect union You can see the prescription table in exporting.Com.Br or we can send it to you. 1. Wide space under fins to tight up elastics, ligature and auxiliars. 2.Precise and highly polished slot Precise in-out 3 .Base of composed ray Great adaptation on tooth Thinner resin applied Greater resistance to detachment 4.Torque in the base, resulting in more resistance and effectiveness Clinical use more facilitated 1.Medium vertical line It should coincide with long axis crowns It facilitates positioning 2.Permanent marks 3.Ball hooks in cusbids and bicusbids Round and comfortable Part of the body of the bracket 4.Round fins for patient's comfort Easy to use elastics and bondages Consult the table for various prescriptions Available in hard plastic transparent closing cup per case or in bulk packaging per teeth.
One piece bracket Material: chirurgical stainless steel 17-4 ph Fabrication process: micro fusion Characteristics that make a diference 1) integral hook: in spherical format, round, anatomical for the patient's larger comfort. 2) permanent medium line: aligned with the long axis of the clinical crown, for larger precision in the collage of the bracket. 3) permanent mark: to facilitate identification. 4) chamfered slot: facilitates the placement of the arch, eliminating obstacles in the labial surface, providing larger comfort to the patient 5) torque in the base: reduces the height of the profile of the bracket, providing larger adaptation and comfort to the patient and at the same time allowing the alignment of the slot in the final phase of the treatment. That characteristic minimizes and it usually eliminates additional adjustments to the arch. 6) area under the expanded wings. The inclined side of the bracket has an angle to expand the area under the wing, facilitating the multiple placements of bondages, fastening and auxiliaries. 7) base with composed ray, for better adaptation to the tooth. Plastic hard case or Lastic bag per tooth bracket.
Periodont gingival For dental sensitiveness Standard box contains 96 units, Net Weight 11.94 kgs
Give concentraton of ozono: 10 ug/ml a 70 ug/ml. 220 w Size: 40 cm x 20 cm x30 cm Weght: 12 kg.
SUPPLIERS OF TROPICAL HARDWOODS SILICA SAND Calcium Carbonate Aggregates Sea Food
Machine make 400 french crepe with 180 mm diameter and make 400 units per hour, 220 volts 50/60 hz one phase. Also have with 320 mm - with the same technical specifications above. The others machines, please ask us directly by our e-mail. The crepe machine 180 have 45 quilograms net and around 50 kg. With the wood case.
Improving the manufacture of saws tapes, vantec launches in the market of woodworking machines bandsaw horizontal ash tape 700mm x 1 ". With rocker system. The function of the rocker is a counterweight in the mountains shake in the steering wheel, ensuring greater durability of the mountain and preventing the breakdown of that without interfering with the stability of the cut. The dimensions of the width of cut and also the width of the trough will depend on the customer's needs, and 160mm to 220mm, is optional inverter frequency by varying the speed from 0 to 38 mt.Lin / min. As required. The horizontal band saw 700mm x 1 "has three forward speeds, ensuring better performance of the machine, as well as providing a higher yield, distance between the teeth of 19mm and 1.7mm cut It has superior traction rollers pressed synchronized with the speed of the treadmill to ensure efficiency in the conduct of timber and established part to be processed. Using a saw blade with a thickness of 0.9mm, working with a rotation of 1.065rpm, bandsaw vol horizontal 700rpm x 1 "guarantees the quality of the cut, the lowest rate of sawdust and uniformity of the gauge. Dimensions of wood: Minimum path length---------------------5mm Maximum height of the block-----------400mm Minimum length---------------------------400mm Maximum length---------------------------3.000mm Equipament: Ash------------------------------------------700mmx1" Main engine--------------------------------20cv 2p trif Engine feed---------------------------------3cv 4p Maximum width being cut---------------220mm/350mm Total length---------------------------------5.500mm Width----------------------------------------2.000mm Blade: Saw blade------------------------------------1.1/4"x0.9x4.220mm Approximate cut----------------------------1.7mm Feed rate-------------------------------------17-22-32mt/lin/min Average production head------------------198m2/h
The bandsaw horizontal vol. 700x 1 ", which has three forward speeds, ensuring a better machine performance and provide greater output, the distance between the teeth of 19 mm and cut of 1.7 mm. It has superior traction rollers pressed synchronized with the speed of the treadmill to ensure efficiency in the conduct of the wood, and the stability of the part to be processed. Using a saw blade with a thickness of 0.9mm, working with a rotation of 1.065rpm, the horizontal band saw vol 700mm x 1" guarantees the quality of the cut, the lower index of sawdust and uniformity of the gauge. Dimensions of wood: Minimum path length---------------------5mm Maximum height of the block-------------400mm Minimum length--------------------------1.000mm Maximum length--------------------------3.000mm Equipament: Ash-----------------------------------700mmx1" Main engine---------------------------20cv 2p trif Engine feed---------------------------3cv 4p Maximum width being cut---------------220mm Total length--------------------------8.000mm Width---------------------------------2.000mm Blade: Saw blade----------------------1.1/4"x0.9x4.220mm Approximate cut----------------1.7mm Feed rate----------------------17-22-32mt/lin/min
Improving the manufacture of saws tapes, vantec launches in the market of woodworking machines bandsaw horizontal ash tape 700mm x 1 ". With rocker system. The function of the rocker is a counterweight in the mountains shake in the steering wheel, ensuring greater durability of the mountain and preventing the breakdown of that without interfering with the stability of the cut. The dimensions of the width of cut and also the width of the trough will depend on the customer's needs, and 160mm to 220mm, is optional inverter frequency by varying the speed from 0 to 38 mt.Lin / min. As required. The horizontal band saw 700mm x 1 "has three forward speeds, ensuring better performance of the machine, as well as providing a higher yield, distance between the teeth of 19mm and 1.7mm cut It has superior traction rollers pressed synchronized with the speed of the treadmill to ensure efficiency in the conduct of timber and established part to be processed. Using a saw blade with a thickness of 0.9mm, working with a rotation of 1.065rpm, bandsaw vol horizontal 700rpm x 1 "guarantees the quality of the cut, the lowest rate of sawdust and uniformity of the gauge. Dimensions of wood: Minimum path length---------------------5mm Maximum height of the block-----------400mm Minimum length---------------------------400mm Maximum length---------------------------3.000mm Equipament: Ash------------------------------------------700mmx1" Main engine--------------------------------20cv 2p trif Engine feed---------------------------------3cv 4p Maximum width being cut---------------220mm/350mm Total length---------------------------------5.500mm Width----------------------------------------2.000mm Blade: Saw blade------------------------------------1.1/4"x0.9x4.220mm Approximate cut----------------------------1.7mm Feed rate-------------------------------------17-22-32mt/lin/min Average production head------------------198m2/h
In order to bring more and more advantages and provide equipment to increase their profits on cost-efficient, the vantec presents saw tape vol horizontal 800mm x 1 ". Equipped with hydro-pneumatic tensioner, which intends to allow the saw according to their characteristics, keeping the tension constant and unchanged, has a compensating valve to correct excesses in abnormal states, and also has the function to facilitate the replacement of the saw. With feeding belt loop of steel, and frequency inverter drive panel. The fact that the machine has 800mm wheels provides better performance. His super reinforced structure ensures maximum shelf-life and results that will surprise you. Dimensions of wood: 1cab Minimum path length-------------------5mm Maximum height of the block-----------315mm Minimum length------------------------1.000mm Maximum length------------------------3.000mm Equipament: Main engine---------------------------25cv 4p trif Engine feed---------------------------3cv 4p Maximum width being cut---------------220mm/350mm Total length--------------------------5.157mm Width---------------------------------2.422mm Blade: Saw blade------------------1.1/4" x 0.9 x 5.330mm Approximate cut------------1.7mm Feed rate------------------0 a 45mt/lin/min Dimensions of wood: 2 cab Minimum path length-------------------5mm Maximum height of the block-----------315mm Minimum length------------------------1.000mm Maximum length------------------------3.000mm
Products: Non-invasive Blood Cuffs Classification: V00 series, V01 series, V10 series, V11 series,VA series, VD series, OEM&ODM sevice; Patient Size: Neonate, Infant, Child, Adult, Thigh etc. Orign Place: China Certificates recognized by CE, FDA, ISO13485 etc. Trading term: FOB Shenzhen; Payment term: T/T in advance; Lead time: Approximately 2-3 weeks; Price range: USD 1-7 Warrant time: Reusable 1 year (10,000 times) ; Disposable N/A;
Products: Non-invasive Blood Cuffs Classification: V00 series, V01 series, V10 series, V11 series,VA series, VD series, OEM&ODM sevice; Patient Size: Neonate, Infant, Child, Adult, Thigh etc. Orign Place: China Certificatesrecognized by CE, FDA, ISO13485 etc. Trading term: FOB Shenzhen; Payment term: T/T in advance; Lead time: Approximately 2-3 weeks; Price range: USD 1-7 Warrant time: Reusable 1 year (10,000 times) ; Disposable N/A;
Products: Non-invasive Blood Cuffs Classification: V00 series, V01 series, V10 series, V11 series,VA series, VD series, OEM&ODM sevice; Patient Size: Neonate, Infant, Child, Adult, Thigh etc. Orign Place: China Certificates recognized by CE, FDA, ISO13485 etc. Trading term: FOB Shenzhen; Payment term: T/T in advance; Lead time: Approximately 2-3 weeks; Price range: USD 1-7 Warrant time: Reusable 1 year (10,000 times) ; Disposable N/A;
Ultra keratin hair straightening kit, without formaldehyde!
Mascots
Call restrictor The main product is a call controller/restrictor, where the main features are: 1. Can allow or block up to 30 numbers of 13 digits or 60 numbers of 8 digits. 2. The program is done by the telephone set keyboard. 3. It has internal Timer, whe it can be programmed from 01-60 minuts of calls. 4. It has call counter, programable from 001-999 calls. 5. It has fast program (Customized for each country) wherewith three digits can block by program 0300, 0900, Telco services (Alarm, etc), 6. For each country we can from factory left emergency calls always not blocked. 7. Size very small 4x4x2 8. You turn on and turn-off the Call restrictor using a password of 4 digits. 9. Easy to program by customers and easy to install. 10. It can easy be programmed to restrict calls to 0900, 0300, long distance calls, and mobile phones. 50 units
Blockline call restrictor The Blockline Call Restrictor, is a product that after installed, can be programable to inhibit call to mobile , 0900, 0300, etc. The user can also program to the telephone just call out for the programable numbers. 100 units/ 10KG
