Ultrasonic Humidifier : An ultrasonic humidifier uses a ceramic diaphragm vibrating at an ultrasonic frequency to create water droplets that silently exit the humidifier in the form of cool fog. Applicable Areas: Textile industry: Humidity control and electrostatic removal in textile mill. Paper production industry: Humidity control, electrostatic removal and dust from paper. Plastic industry: Humidity control and electrostatic removal for plastid injection forming factories and plastic product factories and many other areas .. !!
Application: 1. The Plastering Machine is a new designed multi-functional plastering equipment. 2. The Plastering Machine can be used for pumping and spraying ready-mixed mortar material, such as cement mortar, lime plaster, gypsum plaster, masonry mortar. 3. The Plastering Machine can be used for plastering fluid materials, such as thermal insulation material of walls, refractory material, fire-proof material, water-proof material, acoustic material etc.
Sphere Shaped Nickel Plated Magnets ; Size: OD 5mm :216 Pieces ; Features: Max operating temp : 80°C ; Grade: N35 ; Coating: Nickel -Ni; Directions of Magnetization :Top - North Pole / Bottom - South Pole and Thickness Magnetized. Nickel Coated Magnets have many industrial, educational and household uses.It is best to Nickel coated for long-term maximum energy output and usage. These Magnets are highly resistance against demagnetization.
Feature: -Max operating temp 80°C -Grade: N35 -Coating: Nickel -Ni -Directions of Magnetization :Top - North Pole / Bottom - South Pole and Thickness Magnetized. Nickel Coated Magnets have many industrial, educational and household uses .It is best to Nickel coated for long-term maximum energy output and usage. These Magnets are highly resistance against demagnetization.
Feature: -Max operating temp 80°C -Grade: N35 -Coating: Nickel -Ni -Directions of Magnetization :Top - North Pole / Bottom - South Pole and Thickness Magnetized. Nickel Coated Magnets have many industrial, educational and household uses. It is best to Nickel coated for long-term maximum energy output and usage. These Magnets are highly resistance against demagnetization.
Ferrite magnets are made of a composite of iron oxide and barium or strontium carbonate.These materials are readily available at a lower cost than other types of materials used in permanent magnets making it desirable due to the lower cost. Ceramic magnets have a good balance of magnetic strength, resistance to demagnetizing and economy. They are the most widely used magnets today.
- Standard grip ring stem 7/16" fits HM, Hon, Knoll, DX Racer, Razer and countless other brands (except IKEA); - Utility Patent No.10,434,820; - Rollerblade Polyurethane wheel - safest material for your floor; - No Chair Mat!; - ABEC-9 bearing for quiet smooth rolling; - Steel body withstands up to 660 lbs; - Roller color according to your request; LA warehouse pick up:
An effortless, perfect tee for everyday wear. 4.3-ounce, 100% combed ring spun cotton, 32 singles 1x1 rib knit neck Shoulder to shoulder taping Please note: This product is transitioning from woven labels to tear-away labels. Your order may contain a combination of both labels.
Meivalve is a professional valve spare parts supplier and manufacturer that specializes in providing wholesale valve parts at competitive prices. Our extensive product catalog includes API 6A valve seat seals, peek seal rings, valve stem packing for FC gate valves, hammer union seals, valve stem U-packing seals, ring joint gaskets, and more. Our products are designed for the oil and gas industry, and we pride ourselves on delivering high-quality equipment and accessories to meet industry standards. With our commitment to quality and customer satisfaction, Meivalve is the go-to source for all your valve spare parts needs.
We specializes in drill bits, drill pipe, Mud pump and stabilizers for water well, oil field, construction, geothermal, directional boring, and underground foundation work all over the world. Our purpose is to sell the best quality products at the lowest possible price. We are professional supplier of new and used(rebuilt) drill bits used for oil filed, water well. Including tricone bits,PDC bits and drill pipe. Various of model and dimension available. Good condition and reasonable price. Product Description: Steel teeth Bits 114-117, 127 Soft Formation Tooth Bits The 114-117 bits are used to drill low-compressive strength, soft formation. Long projection tooth lengths are used on high offset cones to provide the greatest penetration rates possible. Wear-resistant hard facing is used to control tooth wear. On the softest bits type this hard facing completely covers the bit teeth. 127 Medium-Hard Formation Tooth Bits The 127 bits are used to drill high-compressive strength, medium hard formations. Short projection teeth with reduced crest length are used in this series of bit designs. Durable hard facing is applied to reduce tooth wear. Medium hard with high compressive strength and hard streak (hard shale ,sandstone , limestone, etc.) 437 Soft Formation TCI Tricone Bits The 437 TCI bits are used to drill low compressive strength, very soft formations. TCI bits maximize the use of both conical and chisel tungsten carbide inserts of large diameters and high projection. This cutting structure design, combined with maximum cone offset, result in high bit penetration rates. The deep intermesh of cutter rows prevents bit bailing in sticky formations. 517 Medium Formation TCI Tricone Bits The 517 features aggressive chisel tungsten carbide insert on the heel rows and inter rows. This design provides a fast drilling rate and added cutting structure durability in medium-to-medium hard for-mationes. The HSN rubber O-ring provides adequate sealing for bearing durability. 637 Hard Formation TCI Tricone Bits The 637 bits can be used to drill hard and abrasive forma-tions. Wear-resistant tungsten carbide inserts are used in the outer rows to prevent loss of bit gauge. Maximum numbers of hemispherical-durability and long life. 617 Medium-Hard Formation TCI Tricone Bits The 617 feature robust chisel tungsten carbide inserts on the heel row and conical on the inner rows. This design provides a fest drilling rate and added cutting structure durability in medium to medium hard formations. The HSN rubber O-rin provides adequate sealing for bearing durability. Plywood case or according to the conform order.
Manual Filling Machine For Soap, Disinfection Water Filler, Double Pump Gear Filling Machine Magnetic Pump acetone filling machine, Disinfection water wine filler automatic ink filling machine with 2 nozzles 2L/min Almost all the good flow of liquid, particularly suitable for sanitary conditions require very high nutrient solution, biological agents, chemicals and pollution, toxic, corrosive liquid 1. Using world brand variable voltage and variable frequency,include imported high accuracy many ring potentiometer and lock panel to adjust filling volume more stable and accurate.filling error 1% 2. Japan imported magnetic gear made of stainless steel pump, reliable quality and long life. 3. stainless steel machine body,endurable 4. Take small place and easy to operate. 5. Easy to clean 6. Own manual and auto function,also can equip online using. 7. Standard type:single head electric filling machine,double pump gear filling machine and four pump type. 8. Only can fill liquid product without granual. 9. The filling volume from 5ml to  5000ml adjustable. and the max filling speed  is about 5000ml/min.Easy to operate and control. Notice item: a. Check valves must be vertical downward, otherwise affect accuracy b.filling head must be vertical downward,otherwise affect leakage material. c. Line corner should not be too small, or affect flow and accuracy. d. Raw material barrel liquid height difference should not be too big, otherwise affect accuracy. e. Volatile liquid please use in the circulation of air environment. f. Unfavorable use together with high frequency wave machine g. Unfavorable use together with big load equipment. h. Filling special liquid must inform the factory to meet the different feeding and discharge tube. Product name TMFM-01S Filling range 0.5ml-3000ml(adjustable) Filling speed 20-40 times/min Filling precision ±0.5% Filling nozzle size 4mm&6mm(outer diameter, can be customized) Power 80W Dimensions 400*360*270mm Net weight 7.5KG
Raymond Grinding Mill Raymond Mill is suitable for grinding of all kinds of materials whose Mohâ??s hardness is below 9.3, such as calcium carbonate, barite, dolomite, calcite, limestone, kaolin, bentonite, marble, gypsum, quartz, feldspar, clay, talc, fluorite, clay, white mud, mica, refractory material, glass, total about 1000 kinds of materials. Raymond Grinding Mill Features: 1. High efficiency and precision classifier, unique airtightness, which canensure the quality of end products. 2. The wear-resistant volute can effectively improve the material liquidity, decrease the air volume loss and avoid air energy loss. 3. The bevel gear overall dive can achieve higher transmission efficiency, easy to install and adjust, long service life and lower cost. 4. Inner thin oil lubrication system can realize lubrication between main bearing and drive bearing without any additional lubrication pump, easy to maintenance. 5. The curved surface shovel with split design, only the blade to be replaced during maintenance, thus the shovel has long service life. 6. The isolated cyclone collector can effectively improving the classifying efficiency and accuracy. Working Principle : After the materials enter the grinding chamber of the main frame, the grinding roller swings outward and presses closely upon the grinding ring due to the centrifugal force generated by the rotation of the main shaft. The blade carries materials to the space between the grinding roller and grinding ring, and materials are ground as the grinding roller rolls. After being ground, the powder is selected by classifier via the cycle wind of the blower and the rough powder will be back to the grinding chamber for regrinding. The qualified powder is brought into the powder collector together with airflow. The powder comes out as end products while the airflow goes back to the powder collector in cycling to make the machine work normally. The remained airflow comes out after purification by dust filter.
MAX DETECTION DEPTH: Metals:120mm; Non-ferrous Metals(Copper): 100mm; AC Wire: 50mm; Single-strand copper wire: 40mm; Wooden 2 modes choices: Precision mode:20mm; Depth mode:38mm AUTOMATIC RING DOWNï¼?After 5 minutes ofinactivity; POWER SUPPLY: 300mAh rechargeable lithium battery Tpye-C Charging PRODUCT SIZE 138*68*22mm PRODUCT WEIGHT 122g PACKAGE SIZE 203*98*45.5mm
A favorite year after year, these polos are known for their exceptional range of colors, styles and sizes. The soft pique knit is shrink-resistant and easy to care for, so your group will always look its best. 7-ounce, 100% ring spun combed cotton heavyweight pique Garment washed for softness Flat knit collar and cuffs Horn-tone buttons Side vents
A favorite year after year, these polos are known for their exceptional range of colors, styles and sizes. The soft pique knit is shrink-resistant and easy to care for, so your group will always look its best. 7-ounce, 100% ring spun combed cotton heavyweight pique Garment washed for softness Flat knit collar and cuffs Horn-tone buttons Side vents
Details More options Material 100% polyester 100%cotton, T/C, 100%polyester, leather... Size 58cm 52cm-56cm for kids, 58cm-62cm for adults Panel multi- panel 5,6,7,8 Visor Regular Common, cover, sandwich, piping Structure Structure Structured or unstructured Logo Custom Embroidery, printing, applique, leather, woven label Back closure plastic Magic tape, plastic, metal, ring brass buckle Sweatband Cotton Cotton, polyester, T/C Inner seam taping Cotton Cotton, polyester, T/C PRODUCE YOUR OWN QUALITY MASKS
Details More options Material 100% polyester 100%cotton, T/C, 100%polyester, leather... Size 58cm 52cm-56cm for kids, 58cm-62cm for adults Panel multi- panel 5,6,7,8 Visor Regular Common, cover, sandwich, piping Structure Structure Structured or unstructured Logo Custom Embroidery, printing, applique, leather, woven label Back closure plastic Magic tape, plastic, metal, ring brass buckle Sweatband Cotton Cotton, polyester, T/C Inner seam taping Cotton Cotton, polyester, T/C
Tubing Head Tubing head is a vital component in the oil and gas industry, enabling the safe and efficient production of hydrocarbons from underground reservoirs. It provides a secure connection for production tubing, controls wellbore pressure, and helps maintain the integrity of the wellhead system. Description The Tubing Head is an adapter between the first casing column and the blowout preventer set (during drilling) or wellhead (after completion). The adapter can be threaded or welded to the casing and can have flanged or clamped connections to match the blowout preventer set or wellhead. It is the primary interface for pressure control equipment. At the time of installation, the casing head is usually tested for very stringent pressure and leakage parameters prior to the installation of any surface equipment to ensure viability under blowout conditions. Characteristics The tubing head and tubing cross are used to suspend the tubing and seal the annular space of tubing. Its characteristics are: 1. The secondary sealing form between the tubing hanging and the reducer flange includes O-ring seal, greased BT seal and metal-to-metal seal; 2. The sealing forms of tubing hanging and tubing head are metal-metal seal, special synthetic rubber seal or metal seal + special synthetic rubber seal; 3. With grease injection port and sealed test port; 4. The lower sealing form of the tubing head includes O-ring seal, greased BT seal and metal seal; 5. The tubing hanging and tubing head reducer flange can directly pass through the cable and can be equipped with a downhole safety valve control pipeline interface; 6.The side exit link is threaded or wire-flange type, and is equipped with VR thread for easy valve replacement operation.
Description Pup Joint, also referred to as Riser Spool, or Surface Riser Spool is a pressure-containing piece of equipment having end connections, used below or between drill-through equipment. The Spacer spool is a wellhead section that has no provision for suspension of tubular members and which may have no provision for sealing of tubular members. It is used to provide separation between two components with equal-sized end connections. providing exceptional performance as a wellhead extension, securing connection for choke manifold and kill manifold. Features A. Flanged, studded, and rubbed ends are available in any combination. B. We can produce a spacer spool for any combination of size and pressure ratings. C. Integral forged material ensures excellent reliable working performance. D. spacer spools are designed to minimize length while allowing sufficient clearance for wrenches or clamps unless otherwise specified by the customers. E. The standard Spacer Spools do not include outlets, although outlets can be added as per request. F. Our spacer spool is suitable for general working conditions and sour service. G. Stainless Steel 316L or Inconel 625 corrosion-resistant alloy ring grooves are also available. H.Normally we will provide tap-end studs and nuts with studded-end connections.
A Globe Control Valve is a type of linear motion valve primarily used to regulate fluid flow in pipelines. It consists of a movable disk (or plug) and a stationary ring seat in a globe-shaped body. By raising or lowering the plug, the valve controls the flow rate. Globe valves are versatile and suitable for various applications, including throttling and isolation services in industries such as oil and gas, chemical processing, and power generation. Their design allows for precise flow control, making them essential components in process control systems where accurate regulation of flow, pressure, or temperature is required. You'll be interested in China Manufacturers.