Rotocasting electroformed nickel molds for doll and medical industry, optical dies and tools for the optical industry.Short run rotocasting in pvc.
Injections.Shipping
Ready to inject insulin pens.
Mold.
Lot of 5 Arrow Injectable Multi-Lumen CVC Kit REF CDC-45703-XP1A EXP. 2012-11 Single use only. Brand new in original unopened factory package. See pictures for more information. Not for human consumption. Not an implantable device. "The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. Do no purchase this item unless you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item." DISCLAIMER: Regardless of the origin of the equipment, documentation provided or identification appearing upon the equipment, the equipment described and offered here is in no way certified for, recommended for, or offered for any specific use. The purchaser agrees that the seller shall not be held responsible or liable for any injuries or damages, whether incidental or consequential, associated in any way with the equipment. The purchaser, by purchasing this equipment, indicates their acknowledgment of, and agreement to the terms of this disclaimer.
PVC ceiling panel mould, angle line mold, window sill plate mold, swash mould, indian door board mould, extrusion molding and machines.Manufacturer & exporter
This safety assessment for a cosmetic product has been carried out in accordance with the requirements of current eu and uk legislation, namely council directive 76/768/eec, including any additional commission directives applicable at the date of signature below. In accordance with the requirements of the cosmetic directive, this assessment takes account of the following - A) the general toxicological profile of each ingredient used: B) the chemical structure of each ingredient: C) the level of exposure of each ingredient; D) the specific exposure characteristics of the areas on which the cosmetic product will be applied; E) the specific exposure characteristics of the class of individuals for whom the cosmetic product is intended. All individual ingredients are approved by the fda of the united states.
We offer best prices for waste clear recycled plastic roll bales ldpe agriculture film scrap LDPE Film Scrap 95/5, 98/2, 99/1 have essential physical and chemical attributes.These LDPE Film Scrap 98/2 are widely used in different industrial applications. Specification of ldpe film scrapWidth Available: LDPE STRETCH FILM SCRAP LDPE FROM WASTE INDUSTRIAL FILM LDPE MIXED POST-INDUSTRIAL & POST-COMMERCIAL LDPE 99/1 SCRAP WASTE FILM LDPE 98/2 WASTE POST-CONSUMER SCRAP NATURAL COLOR LDPE 95/5 STRETCH FILM WRAP FROM PACKAGING LDPE 90/10 We also offer the following: PVC Scrap Resins (E-PVC S-PVC ), off-spec (semi-(rigid), soft) from pipe, window, film, credit card, compounding powder & granulate, medical, bags & tubes, bookbinding film, cables, shoe sole, etc. PC scrap, bottles, CD, DVD, Scrap grinded, re-granulated, powder, resins, PC-GF, metalizedde-metalized, diskettes, sheets, bottles, film and video film, automotive film. PC-ABS, PC-PBT grinded computerTV cases. PCABS Acrylic shredded from automotive rearlight. PET Scrap (APET, PET-G) bottles, sheets, film, lumps, performs, fiber, grinded, bales and re-granulated, natural color. PP Scrap, BOPP, PP+GF scrap BOPP metalized, clear film & printed, grinded, natural (homo (co) polymer). LDPE film scrap, HDPE,HMWPE, LLDPE, super market qualities (50/50%, 95/5%, 98/2%, 99/1%, 100% natural film ), used agricultural film, clear, lumps film, shopping bags, crate, drum, pipe re-granulated, re-grinded and bales. PS Scrap (GPPS, HIPS, EPS, OPP film): Injection & extrusion grinded, CD cases, re-granulate. EPS compressed rollsbales and beads off grade K-resin hanger, natural. PVB Scrap film natural, Rolls, trimming, grinded, re-granulate, lumps, automotive and construction grade. Engineering plastics: [Scrap, off grade, prime] ABS, PMMA, PC, SAN, POM, PA (6, 66, 11, 12) PA+GF (10-40%) PVB, PBT, PPO, TPU, TPO, TPE, EPDM, EVC, PCABS, PCPBT, CA, CP, UF, UM
We offer best prices for waste clear recycled plastic roll bales ldpe agriculture film scrap LDPE Film Scrap 95/5, 98/2, 99/1 have essential physical and chemical attributes.These LDPE Film Scrap 98/2 are widely used in different industrial applications. Specification of ldpe film scrapWidth Available: LDPE STRETCH FILM SCRAP LDPE FROM WASTE INDUSTRIAL FILM LDPE MIXED POST-INDUSTRIAL & POST-COMMERCIAL LDPE 99/1 SCRAP WASTE FILM LDPE 98/2 WASTE POST-CONSUMER SCRAP NATURAL COLOR LDPE 95/5 STRETCH FILM WRAP FROM PACKAGING LDPE 90/10 We also offer the following: PVC Scrap Resins (E-PVC S-PVC ), off-spec (semi-(rigid), soft) from pipe, window, film, credit card, compounding powder & granulate, medical, bags & tubes, bookbinding film, cables, shoe sole, etc. PC scrap, bottles, CD, DVD, Scrap grinded, re-granulated, powder, resins, PC-GF, metalizedde-metalized, diskettes, sheets, bottles, film and video film, automotive film. PC-ABS, PC-PBT grinded computerTV cases. PCABS Acrylic shredded from automotive rearlight. PET Scrap (APET, PET-G) bottles, sheets, film, lumps, performs, fiber, grinded, bales and re-granulated, natural color. PP Scrap, BOPP, PP+GF scrap BOPP metalized, clear film & printed, grinded, natural (homo (co) polymer). LDPE film scrap, HDPE,HMWPE, LLDPE, super market qualities (50/50%, 95/5%, 98/2%, 99/1%, 100% natural film ), used agricultural film, clear, lumps film, shopping bags, crate, drum, pipe re-granulated, re-grinded and bales. PS Scrap (GPPS, HIPS, EPS, OPP film): Injection & extrusion grinded, CD cases, re-granulate. EPS compressed rollsbales and beads off grade K-resin hanger, natural. PVB Scrap film natural, Rolls, trimming, grinded, re-granulate, lumps, automotive and construction grade. Engineering plastics: [Scrap, off grade, prime] ABS, PMMA, PC, SAN, POM, PA (6, 66, 11, 12) PA+GF (10-40%) PVB, PBT, PPO, TPU, TPO, TPE, EPDM, EVC, PCABS, PCPBT, CA, CP, UF, UM
Modern plastic furniture .Exporting and shipping
Precision moulds, precision mould components, stamping dies, plastic moulds.Manufacturer
Eyelets, grommets, rivets, setting dies & machines.Machine repairs
KINDLY CHECK OUR OTHER POSTS FOR TTT and DIP & PAY JET A1 and EN590 IN Fujairah, Rotterdam, Jurong, Bukon, Klang and Houston EN590 available in the following ports: Fujairah: 400,000MT Rotterdam: 600,000MT Jurong: 800,000MT Bukon: 200,000MT Klang: 500,000MT Houston: 700,000MT TANK-TO-VESSELS PROCEDURE AGREEMENT (TTV) 1. Buyer issues ICPO containing the seller's procedure with banking details and scanned copy of buyer's passport along with Charter Party Agreement (CPA) from buyer's Logistic Company. 2. Seller issues Commercial Invoice (Cl) for the available products in Tank at the Port, for Buyer's review and endorsement and return within 3 international working days 3. Seller issue to buyer Tank-To-Vessel Injection Agreement (TTVIA) to be endorsed by both Seller, Buyer and Buyer's shipping Company . 4. Seller issue injection schedule to sign and seal from buyer's Logistics Shipping Company and Seller commence injection of the product. 5. Upon confirmation of Sign and seal Injection schedule from buyer's logistics company with (ATV Letter). Seller release the below POP documents directly to end buyer's secure email. a) Fresh SGS (Not Older Than 48 hrs.) b) Legalized Commercial Invoice. c) Commitment to Supply. d) Injectio n Report e) ATS -Authorization to Sell & Collect f) Authorization to Verify (ATV) g)Dip Test Authorization (OTA) h) Export License. j)Statement of product Availability j) Tank Storage Receipt (TSR) With barcode and GPS Coordinate k) NCNDA/IMFPA 6. The Buyer Conducts Dip Test in the product in the seller's reservoir. 7. Buyer provide Authorization to Inject (ATI) from buyer Logistic Company to enable seller commence Injection of Product into the Buyer's Vessel Tank 8. Within Twenty-Four (24) Hours upon completion of the Injection, buyer make payment for the total cost of the product injected into buyer's Vessel by TT wire transfer to seller's nominated bank account. 9. Buyer lifts products and all intermediaries are paid, Seller and Buyer consider and signs further contracts after successful Transaction Current Prices and commissions: EN590 A) FOB DIP PAY (TTT) USD530MT B) FOB (TTT_TTV) USD510MT JET FUEL A1 A) FOB (TTT_TTV) USD70 B) FOB DIP PAY (TTT) USD80 BUYER SIDE COMMISSIONS: EN590 DIP PAY (TTT) USD15 TTT/TTV: USD20 JET A1: TTT/TTV: USD2 DIP PAY(TTT) USD2
HDPE Injection MFI 1-4, density: 0.952-0.958
New and remanufactured units available
KINDLY CHECK OUR OTHER POSTS FOR DIP PAY and TTV JET A1 and EN590 IN Fujairah, Rotterdam, Jurong, Bukon, Klang and Houston EN590 available in the following ports: Fujairah: 400,000MT Rotterdam: 600,000MT Jurong: 800,000MT Bukon: 200,000MT Klang: 500,000MT Houston: 700,000MT TANK TO TANK-STANDARD PROCEDURE AGREEMENT (TTT) 1. Buyer confirms Soft Offer and issues an official Irrevocable Corporate Purchase Order (ICPO) along with company registration and Valid Passport Copy. CIS on buyer's company letterhead along with TANK STORAGE AGREEMENT (TSA) 2. Seller issues commercial invoice of products in tank at port, buyer signs and returns commercial invoice with acceptance letter stating to adhere to seller procedure 3. Seller provides buyer with the below listed PPOP: A. Tank to Tank Injection agreement (TTIA) B. Product Passport (product analysis report) C. Irrevocable Commitment Letter to Supplier D. Statement of Product Availability 4. Buyer returns signed Tank to Tank Injection agreement (TTIA) with ATV to verify from buyer's Tank Farm which means buyer has storage facilities in favor of buyer to receive product 5. Seller issues injection schedule to sign and seal from buyer Tank Farm and Seller commence injection of the product into buyer's tank. 6. The seller issues the following POP documents to the buyer; the buyer performs a Dip test on the product if needed and makes payment for the total value of the product injected into the tank via MT103 -TT: (a) SGS report for quality and quantity at shore tank not older than 48 hours (b) Product Certificate of Origin (c) Tank storage receipt with full GPS coordinates (d) Unconditional Dip Test authorization letter (e) Authorization to sell and collect (f) NCNDA-IMFPA agreement (g) Q&A (i) Company Registration Certificate 7. (NCNDA/IMFPA) will be signed, within 24 hours of giving POP document 8. Seller transfer title ownership to buyer with all exportation documents required of buyer for the transaction. 9. Upon conclusion of first lift transaction seller pays all intermediaries involved in the Transaction and proceeds with the signing of contract with Buyer. Current Prices and commissions: EN590 A) FOB DIP PAY (TTT) USD530MT B) FOB (TTT_TTV) USD510MT JET FUEL A1 A) FOB (TTT_TTV) USD70 B) FOB DIP PAY (TTT) USD80 BUYER SIDE COMMISSIONS: EN590 DIP PAY (TTT) USD15 TTT/TTV: USD20 JET A1: TTT/TTV: USD2 DIP PAY(TTT) USD2
KINDLY CHECK OUR OTHER POSTS FOR TTT and TTV JET A1 and EN590 IN Fujairah, Rotterdam, Jurong, Bukon, Klang and Houston EN590 available in the following ports: Fujairah: 400,000MT Rotterdam: 600,000MT Jurong: 800,000MT Bukon: 200,000MT Klang: 500,000MT Houston: 700,000MT DIP & PAY PROCEDURE FOB ROTTERDAM, HOUSTON , JURONG , BUKOM , BUSAN, USLAN ZHOUSHAN, QINGDAO/ KLANG, MALINA, AL FUJAIRAH, DOHA, RAS LAFFAN, KAOHSIUNG . NAGOYA.WITH SGS REPORT. NON-NEGOTIABLE 1The Buyer Issue an ICPO, containing the seller's working procedures and Buyers Banking details, along with TSA (TANK STORAGE AGREEMENT) , Buyer Certificate of Incorporation, Company Profile (CP) and International Passport Copy. 2. Seller issues ICC Warning Letter and Commercial Invoice of products in tank at port. Buyer signs and returns commercial invoice with acceptance letter stating to adhere to Seller procedure. 3. The Seller visits Buyer Tank Farm Office with a copy of the SGS Report and shows SGS report strictly to the Buyer's Tank Farm Company only to verify the SGS Report Quality and Quantity with SGS office. 4. After confirmation of successful verification of SGS Report only by Buyer's Tank Farm Company, the Seller pays Buyer's Tank for the first 3 days and the Buyer pays his Tank Company for 3 Days after his Tank Company receives payment from the Seller Company. 5. Buyer Tank Farm provides 6 days TSR. 6. Seller sends injection schedule and Buyer returns signed and sealed Injection Schedule. 7. Seller commences injection of the product to Buyer Tank and completes the injection. 8. The Seller issues the following POP documents to the Buyer; the Buyer performs a Dip Test on the product if needed and makes payment for the total value of the product injected into the tank via MT103/TT: (a) SGS report for quality and quantity at shore tank not older than 48 hours (b) Tank storage receipt with full GPS coordinates (c) Product Certificate of Origin (d) Product injection report at shore tank (e) Unconditional dip test authorization letter (f) NCNDA-IMFPA agreement (g) Q&A (h) Authorization to sell and collect 9.Seller sends payment to all intermediaries involved in the transaction 24 hours after receiving confirmation of Buyer Payment as per signed & sealed NCNDA/IMFPA which is notarized by Public Notary in Kazakhstan and Authorized by Seller's Bank and then monthly remittance is continued as per terms and terms of the contract of sale and purchase agreement between the buyer and seller. Current Prices and commissions: EN590 A) FOB DIP PAY (TTT) USD530MT B) FOB (TTT_TTV) USD510MT JET FUEL A1 A) FOB (TTT_TTV) USD70 B) FOB DIP PAY (TTT) USD80 BUYER SIDE COMMISSIONS: EN590 DIP PAY (TTT) USD15 TTT/TTV: USD20 JET A1: TTT/TTV: USD2 DIP PAY(TTT) USD2
Fuel Offer: Jet A1 and EN590, FOB Houston, Rotterdam, Fujairah, Singapore Commodity: Aviation Turbine Fuel Jet A1 Origin: Non-Sanctioned / Kazakhstan Specification: International Standards Quantity: 2,000,000 BBL â?? Trial (tranches to be confirmed by Buyer), 6,000,000 BBL â?? 12-month contract + R&E where available Inspection: Sellers Fresh SGS < 48 hours old Price: Houston 6/4, Rotterdam 8/6, Fujairah 8/6, Singapore 6/4, off market price per barrel Commodity: EN590 10PPM Ultra Low Sulfur Diesel Origin: Non-Sanctioned / Kazakhstan Specification: International Standards Quantity: 200,000 Metric ton â?? Trial, 400,000 Metric ton â?? 12-month contract + R&E where available Inspection: Sellers Fresh SGS < 48 hours old Price: Houston 10%, Rotterdam 15%, Fujairah 15%, Singapore 10%, off market price per metric ton Important Notes: Settlement Currency: United States Dollar (USD) Only Payment Format: Trial - MT103 Swift / TT Contract: MT103 Swift / TT (Rolling SBLC on request) Delivery: FOB Houston, Rotterdam, Fujairah, Singapore Tank to Tank Injection All duties and excise are the responsibility of the Buyer. Buyers without suitable banking facilities must adhere to pro-forma invoice processes. We can supply SLCO Saudi Light Crude Oil as soon as the Buyer issue LOl/ICPO according to the Procedure. This is the most important thing. 1 can push the Seller to give $4.00 Discount maximum to the Buyer. EN590 10 PPM can be arranged FOB Fujairah, UAE only with Price minus $40 AG Platts with any Quantity. I am direct with both Products as long as the Buyer is serious. Pls. ask the Buyer if Buyer fully accepts SCO for SLCO Saudi Light Crude Oil. 7:33 What's your best price on ESPO I work with three refineries in Russia $29 Gross/$27 Net per BBL
Stamped metal parts and dies.
Metal stampings and mold plastic parts.
