Polyethylene terephthalate (PET), chemical formula (C10H8O4)n, is made from dimethyl terephthalate and glycol transesterification or esterification of terephthalate and glycol to synthesize dihydroxyethyl terephthalate, and then polycondensation reaction. It is a crystal type saturated polyester, which is a milky white or light yellow, highly crystalline polymer with smooth and glossy surface. It is a common resin in life, which can be divided into APET, RPET and PETG. It has excellent physical and mechanical properties in a wide range of temperatures, up to 120â??, and excellent electrical insulation. Even at high temperature and high frequency, its electrical properties are still good, but it has poor corona resistance, creep resistance, fatigue resistance, friction resistance and dimensional stability. Advantages: 1. Good mechanical properties, impact strength is 3~5 times that of other films, good folding resistance. 2 oil resistance, fat resistance, dilute acid resistance, dilute alkali resistance, resistance to most solvents. 3. Can be used in the temperature range of 55-60â?? for a long time, short-term use can resist 65â?? high temperature, can resist -70â?? low temperature, and high and low temperature has little impact on its mechanical properties. 4. Low permeability of gas and water vapor, and excellent resistance to gas, water, oil and odor. 5. High transparency, can block UV, good luster. 6. Non-toxic, tasteless, good health and safety, can be directly used for food packaging.
Physical property Standard Test Condition Units Values Specific Gravity GB/T 1033 g/cm3 0.920 Melt Flow Rate GB/T 3682 g/10min 2 Mechanical Properties Standard Test Condition Units Values Tensile Strength at Yield GB/T 1040 Mpa 10 Tensile Strength at Break GB/T 1040 Mpa 16 Elongation at Break GB/T 1040 % 8 Haze GB/T 2410 % 14 Fish Eyes (pcs/1520 cm 2 ) 0.8mm 0.4mm 2 10 LLDPE Low density polyethylene, also known as high pressure polyethylene (LDPE), is the lightest variety of polyethylene resin, is milky, tasteless, odorless, non-toxic, non-glossy surface waxy particles. It has good softness, extensibility, electrical insulation, transparency, workability and certain air permeability. Its chemical stability performance is good, alkali resistance, resistance to general organic solvents. Application range of low density polyethylene: suitable for seasoning, pastry, sugar, preserves, biscuits, milk powder, tea, fish floss and other food packaging. Tablets, powders and other medicine packaging, shirts, clothing, knitted cotton products and chemical fiber products packaging. Washing powder,detergent, cosmetics and other daily chemical products packaging. Because of the poor mechanical properties of single-layer PE film, it is usually used as the inner layer of composite packaging bag, that is, multilayer composite film heat-sealing substrate.
Product Description & Properties PP BE961MO Resin Granule Test Method Value Unit Basic Properties Melt Flow Rate ISO 1133 12 g/10min Mechanical Properties Flexural Modulus ISO 527-2 Â 1250 MPa IZOD Impact, Notched,23 ISO 180 14 KJ/m2 Thermal Properties Heat Deflection Temperature ISO 75 92 C Â Application Turnover boxes, trays, boxes, barrels, suitcases
Properties: Polystyrene (PS) plastic is a naturally transparent thermoplastic that is available as both a typical solid plastic as well in the form of a rigid foam material. PS plastic is commonly used in a variety of consumer product applications and is also particularly useful for commercial packaging. Polystyrene (PS) for Prototype Development on CNC Machines and 3D Printers: Polystyrene is available in sheet stock, rod stock, and in various shapes. It is a great candidate for subtractive machining processes on a CNC machine. Colors are usually limited to clear, white, and black although colors can be added and it is an excellent candidate for external painting. Polystyrene (PS) for� Injection Molding: General Purpose Polystyrene (GPPS) and High Impact Polystyrene (HIPS) are probably the most commonly used PS resins for injection molding. GPPS is clear, but brittle (think of a CD jewel case) while HIPS is opaque and much less brittle. TYPE BRAND CODE MFR,g/l0min USAGE GPPS 525 1.8-2.8 Disposable knife,fork and cupã??Audio/video cassette housing,CD jewel box,toys,medical container. 168 1.8-2.8 535 6 123P 8 152P 3.5 N1841H/N1841 10 525B 9 500N/500NT 5 HIPS 825 4.5 Home appliances,toys, television& hi-fi housing,video cassette housing,food container,yoghurt port 622P 4.5 SR600 3.5 ABS 757 20 Automobile instrument panel, body panel, interior decoration board, steering wheel, sound insulation board, door lock, bumper, ventilation pipe, refrigerator, TV, washing machine, air conditioner, computer 417 20 0215A 20 0215H 20 750A 50 750ASQ 30 150 2 151 18-24 275 10
General level of polystyrene and can be used for daily necessities, electrical, instrument shell, toys, lamps and lanterns, household appliances, stationery, cosmetics containers, indoor and outdoor decoration, fruit tray, optical components, such as prism, lens, lens window glass and molding, headlights, telecom accessories, electrical frequency capacitor films, containers, such as high-frequency insulation materials, TV guide, chemical containers, etc
Properties: PP has the advantages of excellent comprehensive properties, good chemical stability, good shape processing performance and relatively low cost. PP can adapt to a wider range of application requirements through modifying, copolymerization, grafting,blending, reinforced filling, transparency, filling, weather resistance. Commonly used reference for Pp grade (due to market factors and production schedule, the actual model may be different, please contact us for specific grade confirmation)
Product name:hd polyethylene lldpe linear low density polyethylene ldpe lldpe granules injection grade PP/PVC/ABS/PE Appearance:Linear low density polyethylene is a non-toxic, tasteless, odorless milky white particle with a density of 0.918~0.935g/cm3. Application:At present, lldpe plastic is mainly used in the field of film and packaging, through extrusion and blow molding process to produce plastic bags, garbage bags, industrial lining, agricultural film, protective film, etc., but also through injection molding and rotoplastic production process to make toys, refrigerated appliances, chemical reaction tanks, waste storage boxes and so on.
Product description INEOS produces highly versatile Polypropylene Impact Copolymer grades for extrusion, thermoforming, injection and blow molding applications. The grade portfolio covers a melt flow (MFI) range from fractional melts to 100 (g/10 min. at 2.16kg). The proprietary Innoveneâ?¢ P gas phase production process combined with state-of-the-art catalysts allows for the creation of an innovative PP portfolio
POE plastic is a thermoplastic elastomer in situ polymerization of ethylene and octene using metallocene catalyst. Its characteristics are as follows : (1) the soft crimped chain structure of octene and the crystalline ethylene chain as physical cross-linking point, which makes it both excellent toughness and good processability. (2) There is no unsaturated double bond in the molecular structure of POE plastic, which has excellent aging resistance. (3)POE plastic has narrow molecular weight distribution and good compatibility with polyolefin. (4) Good fluidity can improve the dispersion effect of filler, but also improve the strength of fusion mark products.
Expandable Polystyrene(EPS) EPS(Expandable Polystyrene) is a lightweight, rigid, plastic foam insulation material produced from solid particles of polystyrene. Expandsion is achieved by virtue of small amounts of pentane gas dissolved into the polystyrene base material during production.The gas expands under the action of heat, applied as steam, to form perfectly clesed cells of EPS. Application Expanded polystyrene with relatively low density (1.05 g/cm3), low thermal conductivity, low water absorption, impact resistance,heat insulation, sound insulation, moistureproof, vibration damping and excellent dielectric properties, widely used in mechanical equipment, instruments and meters, household electric, crafts and other valuable products easily damaged, shockproof packaging materials as well as the fast food packaging
Specification item value Place of Origin UK Model Number F00952 Product name HDPE LDPE LLDPE Granules Grade Virgin Film Injection Grade Material High Density Polyethylene Virgin Granules Application Packing Containers Films Pipes Usage General HDPE Plastics Colour White Package 25kgs/bag MOQ 250 Ton Appearance White Transparent Granular
We supply HDPE, PP, ABS, PET, PC, PBT, PA, PMMA, scrap recycled plastics for a long time. Model Number: HDPE milk bottle scrap, Regrind Color: Blue and white and grey Material: HDPE Application: Blow Moulding Packing: Jumbo Bags Packaging Details: 500-700 KGS JUMBO BAGS OR SMAAL BAGS PACKING Delivery Detail: Shipped in 10 days after payment model Number Color: Bule Material: HDPE Application: Blow Moulding Packing: Jumbo Bags Packaging Details: 500-700 KGS JUMBO BAGS OR SMALL BAGS PACKING HDPE scraps Colour: Red, blue, white Grade: recycled granules
item value Place of Origin UK Brand Name PET Bottles Model Number ISO 9001 Product Name PET Plastic Bottles Scrap Color Clear, White, Mixed Color Material Polyurethane Grade 100% Clean, 100% Clear PET Bottles Source Water Bottles, Juice Bottles Color ratio Clear 100% PET Bottles 100% Transparent clear PVC Less than 0.01% Water Content Less than 0.01% moisture Impurity No Caps, rings, or labels
Properly processed soybean meal offers the most complete nutrient profile of any common feedstock. Some of its most significant nutritious benefits include: Protein Soybean meal contains 47-49% protein and 3% crude fiber if the hulls are removed before processing. Processors often leave some hulls in tact or add separated hulls back into the material after processing to create a meal with about 43-46% protein and at least 6% crude fiber. Monogastric (single-stomached) animals, like pigs and chickens, donâ??t digest dietary fibers very well, so they prefer low-fiber, high-protein feeds. Soybean meal offers the highest protein content of any common oilseed or grain, supplying the most complete source of plant-based protein. Amino acids Soybean meal provides all the essential amino acids that monogastric animals requireâ??especially those like lysine and tryptophan that are lacking in corn and other cereal grains. Plus, the amino acids in soybeans are highly digestible. Compared to other oilseed meals, soybean offers the highest lysine digestibility and ranks high in methionine, cystine, and threonine. Energy Soybean meal offers more metabolizable energy than any other plant protein, especially when processed in a mechanical press like the Anderson Expeller. The press leaves about 5% residual oil in the meal, which boosts fat-based energy in feed. The nutrition facts for 100 grams of boiled soybeans are : Calories: 172 Water: 63% Protein: 18.2 grams Carbs: 8.4 grams Sugar: 3 grams Fiber: 6 grams Fat: 9 grams Saturated: 1.3 grams Monounsaturated: 1.98 grams Polyunsaturated: 5.06 grams Terms: MOQ: 25,000 mt * 12 months CIF USD 420 / mt ITLC / SBLC / TT from a top 50 bank Draft of the letter of credit to be approved by the Seller before issuance
Solid minerals like lithium, bitumen, dolomite, feldspar and limestone and petroleum products like crude oil, coal and natural gas..Exploration and transportation
Premium Ash Wood Logs and Lumber for Sale Logs: Species: White Ash (Fraxinus americana), European Ash (Fraxinus excelsior) Grade: Prime, Standard, Industrial Diameter: 10 inches to 40 inches Length: 8 feet to 16 feet Lumber: Grade: FAS, Select & Better, #1 Common, #2 Common Thickness: 4/4, 5/4, 6/4, 8/4, 10/4, 12/4, 16/4 Width: 4 inches to 12 inches (random width) Length: 6 feet to 16 feet Characteristics: Beautiful light to medium brown heartwood with pale sapwood Straight grain with a coarse, uniform texture High flexibility and shock resistance Applications: Perfect for high-quality furniture, durable flooring, sports equipment, and millwork.
Pine Lumber Thickness: 26/32/36/45/50+ mm Width: 100/150/200+ mm Length: 2200/2500/2800/3000+ mm Heat treatment: Steaming light 10-12 hours, uniform color. Drying: KD, KD 8-12% Markings: timber is packed with one length in the bundle and can have markings at customer request A grade: 4 sides clear without knots and / or hearts AB grade: 4 sides clear - on one side of the piece of timber found traces of hearts healthy and / or a healthy node. BC grade: 3 sides clear - allowed red heart, knots, bends and small cracks.