Soybean Oil Specifications 1 Product Description Name Refined Soybean Oil Origin Specify Country Type Edible Vegetable Oil Extraction Method Mechanical andor Solvent Extraction Processing Type Refined Bleached Deodorized 2 Physical and Chemical Characteristics Appearance Clear light yellow to yellow liquid Odor and Taste Bland neutral odor and taste Density 0910 0930 gcm at 20C Refractive Index 1466 1470 at 40C Iodine Value 120 141 g I100g Saponification Value 189 195 mg KOHg Unsaponifiable Matter 15 Acid Value 01 mg KOHg Peroxide Value 10 meqkg Moisture and Volatile Matter 01 Color Lovibond 5 cell 15 Red Max Free Fatty Acids 005 3 Nutritional Information per 100g Energy Approximately 884 kcal Total Fat 100g Saturated Fat 15 20g Monounsaturated Fat 23 30g Polyunsaturated Fat 50 60g Cholesterol 0mg Vitamin E Tocopherols 8 16mg 4 Fatty Acid Composition Palmitic Acid C160 10 12 Stearic Acid C180 2 5 Oleic Acid C181 19 30 Linoleic Acid C182 48 58 Linolenic Acid C183 5 8 Arachidic Acid C200 05 Behenic Acid C220 05 5 Packaging and Storage Packaging Available in bulk drums IBC tanks and PET bottles of various sizes 1L 2L 5L etc Storage Conditions Store in a cool dry place away from direct sunlight and heat sources Shelf Life 12 months from the date of production if stored properly 6 Compliance and Certifications Certifications ISO HACCP Kosher Halal Compliance Meets the standards of Codex Alimentarius US FDA and EU regulations 7 Uses and Applications Culinary Cooking frying salad dressings and baking Industrial Ingredient in margarine mayonnaise and other food products Nutritional Source of essential fatty acids and vitamin E 8 Safety and Handling Handling Precautions Avoid contact with eyes and prolonged skin exposure In case of contact rinse thoroughly with water First Aid Measures If ingested in large amounts seek medical attention 9 Quality Assurance Batch Testing Each batch is tested for quality parameters to ensure consistency and safety Traceability Full traceability from raw material to finished product
Specification for the Best Conveyor Belt Material HighGrade Rubber Ensures durability and resistance to wear and tear Reinforced with Steel or Textile Provides additional strength and flexibility Construction MultiPly Design Multiple layers of fabric or steel cords embedded in rubber for superior tensile strength and loadbearing capacity HeatResistant Layers Suitable for hightemperature environments preventing damage and ensuring longevity Dimensions Width Available in various standard widths eg 300mm 600mm 800mm 1000mm and customizable according to specific needs Length Customizable based on the conveyor system requirements Operating Temperature Range Standard Belts 20C to 60C HeatResistant Belts Up to 200C Tensile Strength Minimum 300 Nmm Ensures the belt can handle highstress conditions Abrasion Resistance DIN 22102 standard Ensures the belt has excellent resistance to wear and tear Tear Resistance High tear resistance to handle sharp and heavy materials without damage Flexibility Superior flexibility for easy maneuverability around curves and bends in the conveyor system Surface Texture Smooth or patterned surface options to match the material handling requirements ensuring minimal slippage and optimal material transport Chemical Resistance Resistant to oils chemicals and other harsh substances to prevent degradation Edge Protection Reinforced edges to prevent fraying and extend the belts lifespan Applications Suitable for use in industries such as mining quarrying agriculture manufacturing and logistics Warranty Comprehensive warranty covering material and workmanship defects This conveyor belt is designed to provide exceptional performance durability and efficiency in demanding industrial environments
Specification for Soybeans General Information Product Name Soybeans Botanical Name Glycine max Origin Country of Origin Harvest Period Harvest Period Batch Number Batch Number Date of Production Production Date Physical and Chemical Properties Appearance Yellow to light brown spherical beans Size 510 mm in diameter Odor Neutral characteristic of soybeans Flavor Mild characteristic of soybeans Moisture Content 13 Purity 99 Foreign Matter 1 BrokenSplit Beans 2 Defective Beans 3 Nutritional Information per 100g Energy 446 kcal Protein 36 g Total Fat 20 g Saturated Fat 3 g Monounsaturated Fat 4 g Polyunsaturated Fat 11 g Total Carbohydrates 30 g Dietary Fiber 9 g Sugars 7 g Cholesterol 0 mg Sodium 2 mg Calcium 277 mg Iron 157 mg Potassium 1797 mg Vitamin C 6 mg Vitamin A 22 IU Contaminants Pesticide Residues Within permissible limits Heavy Metals Lead Cadmium Arsenic Within permissible limits Mycotoxins Within permissible limits Storage and Handling Storage Conditions Store in a cool dry place away from direct sunlight and strong odors Shelf Life Up to 12 months if stored under proper conditions Packaging Polypropylene PP bags 25 kg 50 kg Bulk in containers Quality Assurance Certifications List any relevant certifications eg ISO 22000 Organic Inspection Each batch is tested and certified by Name of Testing Laboratory to ensure compliance with the above specifications Documentation Certificate of Analysis COA provided with each shipment Compliance Regulations Compliant with local and international standards for food safety and quality Safety Data Sheet SDS Provided upon request
Specification for Sunflower Oil General Information Product Name Sunflower Oil Botanical Name Helianthus annuus Origin Country of Origin Harvest Period Harvest Period Batch Number Batch Number Date of Production Production Date Physical and Chemical Properties Appearance Clear light yellow liquid Odor Mild characteristic of sunflower seeds Flavor Neutral Free Fatty Acids FFA 01 as Oleic Acid Peroxide Value 10 meq Okg Moisture Volatile Matter 02 Insoluble Impurities 005 Iodine Value 118141 g I100g Saponification Value 188194 mg KOHg Unsaponifiable Matter 15 Specific Gravity at 20C 09180923 gcm Refractive Index at 20C 14671469 Fatty Acid Composition Linoleic Acid C182 4874 Oleic Acid C181 1440 Palmitic Acid C160 58 Stearic Acid C180 25 Linolenic Acid C183 03 Nutritional Information per 100g Energy 884 kcal Total Fat 100 g Saturated Fat 11 g Monounsaturated Fat 19 g Polyunsaturated Fat 70 g Cholesterol 0 mg Sodium 0 mg Carbohydrates 0 g Protein 0 g Vitamin E 41 mg 273 DV Contaminants Pesticide Residues Within permissible limits Heavy Metals Lead Cadmium Arsenic Within permissible limits Polycyclic Aromatic Hydrocarbons PAHs Within permissible limits Storage and Handling Storage Conditions Store in a cool dry place away from direct sunlight and strong odors Shelf Life Up to 24 months if stored under proper conditions Packaging Plastic bottles 500 ml 1 L 5 L Tin cans 5 L 10 L Bulk in drums or IBCs Quality Assurance Certifications List any relevant certifications eg ISO 22000 HACCP Inspection Each batch is tested and certified by Name of Testing Laboratory to ensure compliance with the above specifications Documentation Certificate of Analysis COA provided with each shipment Compliance Regulations Compliant with local and international standards for sunflower oil Safety Data Sheet SDS Provided upon request
Physical and Chemical Properties Appearance Black kidneyshaped beans Size Uniform typically 0508 cm in length Odor Neutral characteristic of black beans Flavor Mild slightly nutty Moisture Content 14 Purity 99 Foreign Matter 05 BrokenSplit Beans 3 Defective Beans 2 Nutritional Information per 100g Energy 333 kcal Protein 24 g Total Fat 1 g Saturated Fat 02 g Total Carbohydrates 60 g Dietary Fiber 25 g Sugars 2 g Cholesterol 0 mg Sodium 5 mg Calcium 83 mg Iron 5 mg Potassium 1400 mg Vitamin C 0 mg Vitamin A 0 IU Contaminants Pesticide Residues Within permissible limits Heavy Metals Lead Cadmium Arsenic Within permissible limits Mycotoxins Within permissible limits Storage and Handling Storage Conditions Store in a cool dry place away from direct sunlight and strong odors Shelf Life Up to 24 months if stored under proper conditions Packaging Polypropylene PP bags 25 kg 50 kg Bulk in containers Quality Assurance Certifications List any relevant certifications eg ISO 22000 Organic Inspection Each batch is tested and certified by Name of Testing Laboratory to ensure compliance with the above specifications Documentation Certificate of Analysis COA provided with each shipment Compliance Regulations Compliant with local and international standards for food safety and quality Safety Data Sheet SDS Provided upon request
Physical and Chemical Properties Appearance Semisolid at room temperature light yellow to goldenyellow liquid when melted Odor Neutral characteristic of palm oil Flavor Neutral Free Fatty Acids FFA 5 as Palmitic Acid Moisture Impurities 01 Peroxide Value 10 meq Okg Iodine Value 5055 g I100g Saponification Value 190209 mg KOHg Unsaponifiable Matter 15 Specific Gravity at 40C 08890895 gcm Refractive Index at 40C 14541456 Fatty Acid Composition Palmitic Acid C160 4046 Stearic Acid C180 46 Oleic Acid C181 3744 Linoleic Acid C182 912 Myristic Acid C140 12 Nutritional Information per 100g Energy 884 kcal Total Fat 100 g Saturated Fat 50 g Monounsaturated Fat 40 g Polyunsaturated Fat 10 g Cholesterol 0 mg Sodium 0 mg Carbohydrates 0 g Protein 0 g Vitamin E 15 mg 100 DV Contaminants Pesticide Residues Within permissible limits Heavy Metals Lead Cadmium Arsenic Within permissible limits Polycyclic Aromatic Hydrocarbons PAHs Within permissible limits Storage and Handling Storage Conditions Store in a cool dry place away from direct sunlight and strong odors Shelf Life Up to 12 months if stored under proper conditions Packaging Drums 200 liters Intermediate Bulk Containers IBCs Bulk in tankers Quality Assurance Certifications List any relevant certifications eg RSPO ISO 22000 Inspection Each batch is tested and certified by Name of Testing Laboratory to ensure compliance with the above specifications Documentation Certificate of Analysis COA provided with each shipment Compliance Regulations Compliant with local and international standards for palm oil Safety Data Sheet SDS Provided upon request
Specification for Extra Virgin Olive Oil General Information Product Name Extra Virgin Olive Oil EVOO Botanical Name Olea europaea Origin Country of Origin Harvest Period Harvest Period Batch Number Batch Number Date of Production Production Date Physical and Chemical Properties Appearance Clear goldengreen liquid Odor Fresh fruity aroma characteristic of olives Flavor Fruity slightly bitter and pungent Free Fatty Acids FFA 08 as Oleic Acid Peroxide Value 20 meq Okg K270 022 K232 250 DeltaK 001 Moisture and Volatile Matter 02 Insoluble Impurities 01 Iodine Value 7594 g I100g Saponification Value 184196 mg KOHg Specific Gravity at 20C 09100916 gcm Refractive Index at 20C 14671470 Fatty Acid Composition Oleic Acid C181 5583 Linoleic Acid C182 3521 Palmitic Acid C160 7520 Stearic Acid C180 055 Linolenic Acid C183 15 Palmitoleic Acid C161 0335 Nutritional Information per 100g Energy 884 kcal Total Fat 100 g Saturated Fat 14 g Monounsaturated Fat 73 g Polyunsaturated Fat 11 g Cholesterol 0 mg Sodium 0 mg Carbohydrates 0 g Protein 0 g Vitamin E 14 mg 93 DV Contaminants Pesticide Residues Within permissible limits Heavy Metals Lead Cadmium Arsenic Within permissible limits Polycyclic Aromatic Hydrocarbons PAHs Within permissible limits Storage and Handling Storage Conditions Store in a cool dry place away from direct sunlight Shelf Life Up to 24 months if stored under proper conditions Packaging Glass bottles 250 ml 500 ml 1 L Tin cans 3 L 5 L Bulk in drums or IBCs Quality Assurance Certifications List any relevant certifications eg USDA Organic EU Organic ISO 22000 Inspection Each batch is tested and certified by Name of Testing Laboratory to ensure compliance with the above specifications Documentation Certificate of Analysis COA provided with each shipment Compliance Regulations Compliant with local and international standards for extra virgin olive oil Safety Data Sheet SDS Provided upon request
Specification for Used Cooking Oil General Information Product Name Used Cooking Oil UCO Source Vegetable oils such as palm oil soybean oil sunflower oil etc used in food processing or cooking Origin Country of Origin Batch Number Batch Number Date of Collection Collection Date Physical and Chemical Properties Appearance Yellow to brown liquid Odor Characteristic may have a slight rancid odor Free Fatty Acids FFA 5 as Oleic Acid Moisture Impurities 10 Density at 20C 091 093 gcm Iodine Value 75 95 g I100g Saponification Value 180 200 mg KOHg Unsaponifiable Matter 2 Peroxide Value 10 meq Okg Acid Value 6 mg KOHg Contaminants Heavy Metals eg Lead Cadmium Arsenic Within permissible limits Polycyclic Aromatic Hydrocarbons PAHs Within permissible limits Storage and Handling Storage Conditions Store in a cool dry place away from direct sunlight Shelf Life Up to 12 months if stored under proper conditions Packaging Bulk in ISO tanks or flexitanks Drums 200 liters Intermediate Bulk Containers IBCs Applications Biodiesel Production Used as feedstock for biodiesel manufacturing Industrial Uses Lubricants soaps animal feed and other industrial applications Quality Assurance Certifications List any relevant certifications eg ISCC RSPO Inspection Each batch is tested and certified by Name of Testing Laboratory to ensure compliance with the above specifications Documentation Certificate of Analysis COA provided with each shipment Compliance Regulations Compliant with local and international standards for used cooking oil Safety Data Sheet SDS Provided upon request
We have the following types of dried fruits available for wholesale: Raisins (dried grapes) Dried apricots Dried figs Dried dates Dried prunes (dried plums) Dried cranberries Dried cherries Dried apples Dried bananas (banana chips) Dried mango Dried pineapple Dried papaya Dried blueberries Dried strawberries Dried pears Dried kiwis Dried peaches Dried plums Dried mulberries Dried goji berries These dried fruits are often used as snacks, in baking, or as toppings for various dishes
Specification for 100% Cotton Yarn Waste Product Description: Name: 100% Cotton Yarn Waste Material: Pure Cotton Form: Yarn Waste Color: Natural (white, off-white), can vary depending on the source Quality: Clean, minimal contamination (dust, foreign fibers) Physical Properties: Fiber Length: Variable, typically short fibers Fiber Fineness: Coarse to medium Moisture Content: Standard (within industry norms) Impurities: Less than 5% (foreign materials, dust) Technical Specifications: Cotton Purity: 100% Origin: Specify country of origin if required Packaging: Compressed bales or loose in bags, customizable as per client requirements Weight per Bale/Bag: Typically between 100-250 kg, customizable Storage Conditions: Dry, cool place away from direct sunlight Usage: Applications: Spinning, weaving, filling material for furniture, automotive industries, recycling into new yarns, making mops, cleaning cloths Compliance: Regulations: Must comply with industry standards and regulations of the importing country Additional Notes: Customization: Available upon request for color, packaging, and specific quality parameters Inspection: Quality checks and inspections are conducted before shipping to ensure minimal contamination and consistent quality
Specification for 100% Cotton Yarn Waste Product Description: Name: 100% Cotton Yarn Waste Material: Pure Cotton Form: Yarn Waste Color: Natural (white, off-white), can vary depending on the source Quality: Clean, minimal contamination (dust, foreign fibers) Physical Properties: Fiber Length: Variable, typically short fibers Fiber Fineness: Coarse to medium Moisture Content: Standard (within industry norms) Impurities: Less than 5% (foreign materials, dust) Technical Specifications: Cotton Purity: 100% Origin: Specify country of origin if required Packaging: Compressed bales or loose in bags, customizable as per client requirements Weight per Bale/Bag: Typically between 100-250 kg, customizable Storage Conditions: Dry, cool place away from direct sunlight Usage: Applications: Spinning, weaving, filling material for furniture, automotive industries, recycling into new yarns, making mops, cleaning cloths Compliance: Regulations: Must comply with industry standards and regulations of the importing country Additional Notes: Customization: Available upon request for color, packaging, and specific quality parameters Inspection: Quality checks and inspections are conducted before shipping to ensure minimal contamination and consistent quality
Nylon 6 (Polyamide 6) Specification General Description: Nylon 6, also known as Polyamide 6 (PA6), is a versatile engineering thermoplastic known for its high mechanical strength, toughness, and excellent wear resistance. It is widely used in various industrial applications due to its balance of properties. Material Properties: Chemical Name: Polyamide 6 (PA6) CAS Number: 25038-54-4 Color: Natural (milky white), can be pigmented to various colors Mechanical Properties: Tensile Strength: 75 - 90 MPa Elongation at Break: 30 - 300% Flexural Modulus: 2,500 - 3,300 MPa Impact Strength (Izod, Notched): 5 - 13 kJ/m Hardness (Rockwell): R120 Thermal Properties: Melting Temperature: 215 - 225C Glass Transition Temperature: 40 - 50C Continuous Service Temperature: -40 to 100C (short-term up to 150C) Thermal Conductivity: 0.23 W/(m·K) Electrical Properties: Volume Resistivity: 10^12 - 10^14 ·cm Dielectric Strength: 20 - 30 kV/mm Dielectric Constant: 3.7 - 4.2 at 1 MHz Physical Properties: Density: 1.13 - 1.15 g/cm³ Water Absorption: 1.3 - 1.9% (24 hours at 23C) Chemical Resistance: Resistant to: Alkalies, oils, greases, hydrocarbons Not Resistant to: Strong acids, phenols, chlorinated hydrocarbons Processing Information: Molding Temperature: 230 - 290C Mold Temperature: 70 - 90C Drying: 80C for 4-6 hours before processing Extrusion Temperature: 220 - 250C Applications: Automotive Parts: Gears, bearings, housings, and other under-the-hood components Industrial Components: Machine parts, conveyor belts, and bushings Consumer Goods: Sports equipment, kitchen utensils, and electronic housings Textile Industry: Filaments, fibers, and threads Standards and Compliance: ASTM Standards: D4066, D6779 ISO Standards: ISO 1043-1, ISO 1874-1 RoHS Compliant: Yes REACH Compliant: Yes Safety and Handling: Hazards: Generally regarded as safe, but melting and processing should be conducted in well-ventilated areas to avoid inhalation of fumes. Storage: Keep in a cool, dry place. Protect from moisture to maintain material integrity. This specification provides an overview of Nylon 6 (PA6) and its key properties, ensuring it meets the requirements for various applications in engineering and industrial fields.
PA6, also known as Polyamide 6 or Nylon 6, is a thermoplastic material widely used in engineering applications due to its excellent mechanical properties, high durability, and resistance to abrasion and chemicals. It is characterized by its strength, stiffness, and toughness, making it ideal for producing various industrial components such as gears, bearings, and housings. PA6 also exhibits good electrical insulating properties and can be easily processed through injection molding and extrusion, making it versatile for numerous manufacturing applications.
Polyamide 6 (Nylon 6) Description Polyamide 6, also known as Nylon 6, is a synthetic polymer that belongs to the polyamide family. It is a versatile and widely used engineering thermoplastic known for its excellent mechanical properties, thermal stability, and chemical resistance. Here's a detailed description: Properties: High Strength and Durability: Polyamide 6 exhibits high tensile strength and toughness, making it ideal for demanding engineering applications. Excellent Wear Resistance: It has superior abrasion resistance, which contributes to its longevity in applications involving friction and wear. Good Thermal Stability: Polyamide 6 can withstand high temperatures, maintaining its properties and performance in various thermal conditions. Chemical Resistance: It is resistant to many chemicals, oils, and solvents, making it suitable for use in harsh environments. Good Impact Resistance: The material can absorb and withstand significant impacts without cracking or breaking. Low Friction Coefficient: This property makes it ideal for use in applications involving moving parts, reducing wear and tear. Applications: Automotive Industry: Used in manufacturing parts such as gears, bearings, and engine components due to its strength and durability. Textiles: Utilized in the production of fabrics, ropes, and threads owing to its excellent fiber-forming properties. Electrical and Electronics: Employed in making connectors, insulators, and other electronic components because of its good insulating properties. Industrial Machinery: Suitable for making various machine parts, including rollers, pulleys, and sprockets. Consumer Goods: Commonly used in the production of household items, sports equipment, and kitchen utensils. Advantages: Versatility: Can be molded into various shapes and forms, catering to a wide range of industrial and consumer applications. Lightweight: Despite its strength, Polyamide 6 is relatively lightweight, offering ease of handling and installation. Recyclability: It is recyclable, contributing to sustainability and environmental conservation efforts. Cost-Effective: Offers a good balance of performance and cost, making it a preferred choice in many industries. Polyamide 6 (Nylon 6) is an indispensable material in modern manufacturing, providing a blend of performance, reliability, and versatility that meets the needs of numerous applications.
Polyamide Scrap Specification Material: Polyamide (Nylon) Types: PA6, PA66 Form: Regrind, Baled, Flakes Quality: Clean, free from contaminants (dirt, metals, other plastics) Consistent color and type Moisture content: â?¤ 1% Physical Properties: Melt Flow Index (MFI): As per customer requirements Tensile Strength: As per customer requirements Packaging: Bales: Weight per bale (specify, e.g., 500 kg) Regrind/Flakes: Packed in jumbo bags (specify weight, e.g., 500-1000 kg) Origin: Specify country or region of origin Inspection: Pre-shipment inspection: By buyer or third party (as agreed) Delivery: Shipping terms: FOB, CIF, etc. Lead time: Specify days/weeks from order confirmation Documentation: Material Safety Data Sheet (MSDS) Certificate of Analysis (COA) Export documentation (as required) This specification can be tailored to meet specific customer requirements or industry standards.
Aluminum Specification: Aluminum is a lightweight, silvery-white, and ductile metal known for its high corrosion resistance, excellent thermal and electrical conductivity, and versatility in various applications. It is commonly used in industries such as aerospace, construction, automotive, and packaging. Physical Properties: Density: Approximately 2.70 g/cm�³ Melting Point: 660.3�°C (1220.5�°F) Boiling Point: 2519�°C (4566�°F) Mechanical Properties: Tensile Strength: Varies with alloy, typically ranging from 70 to 700 MPa Yield Strength: Varies with alloy, typically ranging from 30 to 500 MPa Elongation at Break: Varies with alloy, typically from 1% to 30% Hardness: Varies with alloy, typically from 20 to 120 HB Chemical Composition: Pure aluminum is composed of 99.0% to 99.9% aluminum. Common alloying elements include copper, manganese, silicon, magnesium, and zinc. Thermal Properties: Thermal Conductivity: 205 W/m�·K (at 20�°C) Coefficient of Thermal Expansion: 23.1 x 10â?»â?¶ /K Electrical Properties: Electrical Conductivity: 37.7 x 10â?¶ S/m (at 20�°C) Corrosion Resistance: Excellent resistance to atmospheric corrosion due to the formation of a protective oxide layer. Good resistance to corrosion in marine environments and many industrial chemicals. Formability and Machinability: Highly ductile and can be easily formed into various shapes through processes like rolling, extruding, and drawing. Machinability varies with the alloy, with some aluminum alloys offering better machinability than others. Common Applications: Aerospace: Airplane fuselages, wings, and other structural components. Automotive: Engine components, wheels, and body panels. Construction: Window frames, roofing, and structural components. Packaging: Beverage cans, foil, and containers. Electrical: Conductors, wiring, and electronic components. Surface Treatment: Aluminum can be anodized, painted, or coated to enhance its surface properties and appearance. Recyclability: Aluminum is highly recyclable and retains its properties after recycling, making it a sustainable material choice. Standards and Grades: Common standards include ASTM B209 for aluminum sheet and plate, ASTM B221 for aluminum extruded bars, rods, wire, profiles, and tubes. Grades and tempers vary depending on the specific application and alloy composition.
Aluminum Specification: Aluminum is a lightweight, silvery-white, and ductile metal known for its high corrosion resistance, excellent thermal and electrical conductivity, and versatility in various applications. It is commonly used in industries such as aerospace, construction, automotive, and packaging. Physical Properties: Density: Approximately 2.70 g/cm�³ Melting Point: 660.3�°C (1220.5�°F) Boiling Point: 2519�°C (4566�°F) Mechanical Properties: Tensile Strength: Varies with alloy, typically ranging from 70 to 700 MPa Yield Strength: Varies with alloy, typically ranging from 30 to 500 MPa Elongation at Break: Varies with alloy, typically from 1% to 30% Hardness: Varies with alloy, typically from 20 to 120 HB Chemical Composition: Pure aluminum is composed of 99.0% to 99.9% aluminum. Common alloying elements include copper, manganese, silicon, magnesium, and zinc. Thermal Properties: Thermal Conductivity: 205 W/m�·K (at 20�°C) Coefficient of Thermal Expansion: 23.1 x 10â?»â?¶ /K Electrical Properties: Electrical Conductivity: 37.7 x 10â?¶ S/m (at 20�°C) Corrosion Resistance: Excellent resistance to atmospheric corrosion due to the formation of a protective oxide layer. Good resistance to corrosion in marine environments and many industrial chemicals. Formability and Machinability: Highly ductile and can be easily formed into various shapes through processes like rolling, extruding, and drawing. Machinability varies with the alloy, with some aluminum alloys offering better machinability than others. Common Applications: Aerospace: Airplane fuselages, wings, and other structural components. Automotive: Engine components, wheels, and body panels. Construction: Window frames, roofing, and structural components. Packaging: Beverage cans, foil, and containers. Electrical: Conductors, wiring, and electronic components. Surface Treatment: Aluminum can be anodized, painted, or coated to enhance its surface properties and appearance. Recyclability: Aluminum is highly recyclable and retains its properties after recycling, making it a sustainable material choice. Standards and Grades: Common standards include ASTM B209 for aluminum sheet and plate, ASTM B221 for aluminum extruded bars, rods, wire, profiles, and tubes. Grades and tempers vary depending on the specific application and alloy composition.
Specification for Aluminum Scrap 1. Scope This specification defines the quality and requirements for aluminum scrap intended for recycling and manufacturing. It ensures consistency, quality, and suitability for various applications. 2. Material Requirements 2.1. Composition Aluminum Content: Minimum 90% by weight. Contaminants: Maximum 2% by weight of non-aluminum metals (e.g., steel, copper). Maximum 1% by weight of non-metallic materials (e.g., plastic, rubber). Moisture content should not exceed 2% by weight. 2.2. Form and Condition Types: Can include profiles, sheets, turnings, wire, and castings. Size: Must be manageable for handling and processing, typically not exceeding 1 meter in any dimension. Cleanliness: Free from excessive oil, grease, and other foreign substances. 3. Packaging and Labeling Packaging: Scrap should be securely packaged or bundled to prevent scattering and contamination during transport. Packaging materials should not contaminate the scrap. Labeling: Each package should be clearly labeled with: Supplier name and address. Net weight. Scrap grade and type. 4. Inspection and Testing Visual Inspection: Performed to check for visible contaminants, appropriate size, and cleanliness. Chemical Analysis: Periodic testing to verify aluminum content and contaminant levels. Moisture Test: Conducted to ensure moisture content compliance. 5. Documentation Certificate of Analysis (CoA): Provided with each shipment, detailing the chemical composition and confirming compliance with this specification. Bill of Lading: Including details of the shipment, weight, and scrap grade. 6. Compliance and Rejection Compliance: All supplied scrap must meet the requirements outlined in this specification. Rejection: Material not meeting these requirements will be subject to rejection and return at the supplier's expense. 7. Safety and Handling Handling: Appropriate safety measures should be taken to prevent injury or contamination during handling and transportation. Personal Protective Equipment (PPE): Workers must use suitable PPE, including gloves and eye protection. 8. Environmental and Regulatory Considerations Compliance: Must comply with all relevant local, national, and international regulations regarding waste and recycling materials. Environmental Impact: Suppliers are encouraged to follow environmentally friendly practices in the collection and processing of aluminum scrap.
Aluminum Scrap Specification 1. General Requirements Material: Aluminum scrap, free from iron, steel, and other contaminants. Form: The scrap may be in various forms, including but not limited to, sheets, turnings, castings, extrusions, or beverage cans. Color: Predominantly silver, may include anodized or coated pieces. 2. Quality Standards Purity: Minimum 95% aluminum content. Contaminants: Non-aluminum metals (e.g., copper, zinc): Max 2%. Organic material (e.g., paint, plastic): Max 1%. Moisture: Max 0.5%. Dirt and other non-metallic impurities: Max 1%. 3. Physical Characteristics Size: Sheets: No dimension exceeding 1 meter. Turnings: Free-flowing, dry, with no clusters exceeding 20 cm in diameter. Castings and extrusions: No piece exceeding 50 cm in any dimension. Weight: Scrap should be delivered in bulk or bundled form, each bundle not exceeding 1 metric ton. 4. Packaging Bulk: Loose scrap should be delivered in durable containers suitable for handling and transport. Bundles: Bundled scrap should be securely tied and stable for transport and handling. 5. Delivery Inspection: Material will be inspected upon receipt for compliance with the specified requirements. Documentation: Each shipment should be accompanied by a certificate of analysis indicating the aluminum content and a detailed list of any contaminants present. 6. Safety and Environmental Considerations Handling: Scrap must be free from hazardous materials and handled in a manner compliant with local safety regulations. Environmental: Supplier must adhere to all relevant environmental regulations regarding the recycling and transport of aluminum scrap.
Aluminium is the most abundant metal and the third most common element on the planet, accounting for 8% of its crust. Aluminium is widely reckoned for recyclable nature, environment-friendly nature and high ductility. Aluminium recycling is one the worldâ??s fastest-growing industry. We deal with all grades of aluminium scrap and ingots & process aluminium scrap using advanced facilities by ensuring purity and quality. Aluminum Scrap Specification 1. General Requirements Material: Aluminum scrap, free from iron, steel, and other contaminants. Form: The scrap may be in various forms, including but not limited to, sheets, turnings, castings, extrusions, or beverage cans. Color: Predominantly silver, may include anodized or coated pieces. 2. Quality Standards Purity: Minimum 95% aluminum content. Contaminants: Non-aluminum metals (e.g., copper, zinc): Max 2%. Organic material (e.g., paint, plastic): Max 1%. Moisture: Max 0.5%. Dirt and other non-metallic impurities: Max 1%. 3. Physical Characteristics Size: Sheets: No dimension exceeding 1 meter. Turnings: Free-flowing, dry, with no clusters exceeding 20 cm in diameter. Castings and extrusions: No piece exceeding 50 cm in any dimension. Weight: Scrap should be delivered in bulk or bundled form, each bundle not exceeding 1 metric ton. 4. Packaging Bulk: Loose scrap should be delivered in durable containers suitable for handling and transport. Bundles: Bundled scrap should be securely tied and stable for transport and handling. 5. Delivery Inspection: Material will be inspected upon receipt for compliance with the specified requirements. Documentation: Each shipment should be accompanied by a certificate of analysis indicating the aluminum content and a detailed list of any contaminants present. 6. Safety and Environmental Considerations Handling: Scrap must be free from hazardous materials and handled in a manner compliant with local safety regulations. Environmental: Supplier must adhere to all relevant environmental regulations regarding the recycling and transport of aluminum scrap.
