Description of Copper Scrap Copper scrap refers to discarded copper materials that can be recycled and reused. This material is a significant source of copper for manufacturing new products, conserving natural resources, and reducing environmental impact. Copper scrap is available in various grades, each differing in purity and physical characteristics. Recycling copper scrap is energy-efficient compared to producing new copper from ore. The recycling process includes collecting, sorting, cleaning, and melting the scrap to produce reusable copper. Specifications for Copper Scrap #1 Copper (Bare Bright) Description: Clean, unalloyed, uncoated copper wire. Purity: 99.9% Cu. Physical Characteristics: Bright and shiny, no insulation or tarnish. Common Uses: Electrical and plumbing applications. #1 Copper (Clove) Description: Clean, unalloyed copper tubing and bus bars. Purity: 99.9% Cu. Physical Characteristics: Free of paint, solder, and any attachments. Common Uses: Electrical and plumbing, high-grade manufacturing. #2 Copper Description: Unalloyed copper with minimal contamination. Purity: 96-99% Cu. Physical Characteristics: May have some paint, solder, or coatings. Common Uses: Low-grade electrical applications, plumbing. #3 Copper (Light Copper) Description: Copper with significant contamination or alloying. Purity: 80-96% Cu. Physical Characteristics: Includes thin gauge sheets, some corrosion. Common Uses: Industrial applications, lower-grade products. #4 Copper (Insulated Wire) Description: Copper wire with insulation. Purity: Varies. Physical Characteristics: Copper content varies with insulation type. Common Uses: Electrical applications where insulation is required. Copper Turnings Description: Small pieces of copper from machining processes. Purity: 94-99% Cu. Physical Characteristics: Fine and shavings, may have oil or moisture. Common Uses: Remelting and refining. Copper Granules Description: Copper pieces from recycled electrical cables. Purity: 98-99% Cu. Physical Characteristics: Granulated, often from mechanical recycling. Common Uses: Electrical manufacturing, foundries. Additional Notes Recycling Process: Involves collection, sorting, cleaning, and melting. Quality control is crucial to maintain purity levels. Market Value: Varies based on grade, market demand, and purity. Higher purity grades generally fetch higher prices. Environmental Impact: Recycling copper scrap significantly reduces the need for mining, thus conserving natural resources and reducing carbon footprint. This detailed specification provides a clear understanding of the different grades of copper scrap, helping in the appropriate identification and use of each type.
Pipes (Carbon Steel, Stainless Steel, Nickel Alloys, Seamless & Welded)
Stainless Steel Floor Gullies are suitable for use in food production, juice production and fish/meat processing industries. Floor gullies are available in different sizes to suit various applications.
Product Name: 3 Cut Tyre Scrap Description: 3 Cut Tyre Scrap consists of used tires that have been manually or mechanically cut into three pieces, typically across the tire's diameter. The scrap may contain tire tread, sidewalls, and bead wire segments. Specifications: Size: Pieces are generally cut into sections approximately 5 inches (12.7 cm) to 10 inches (25.4 cm) in width. Composition: Mainly composed of rubber, steel bead wire, and fabric remnants. Impurities: Minimal to no presence of foreign materials such as dirt, stones, or other contaminants. Moisture Content: Ideally less than 2% moisture by weight. Packaging: Typically shipped in bulk, bundled or loose, and packed into containers or shipped on pallets. Usage: 3 Cut Tyre Scrap is commonly used in various recycling and manufacturing processes to produce products such as rubber mulch, mats, and other recycled rubber goods. Packing & Shipment: Packaging: Bulk packaging in containers or on pallets. Loading: Loaded onto trucks or shipping containers as per customer requirements. Destination Port: To be specified by the buyer. Payment Terms: Negotiable, typically involving advanced payment or letter of credit. Quality Assurance: The product meets industry standards for recycled tire scrap and is inspected to ensure compliance with agreed-upon specifications. Environmental Considerations: Produced and handled in accordance with environmental regulations and guidelines, promoting sustainable recycling practices. Note: Specifications may vary slightly depending on supplier and customer requirements. Buyers are encouraged to request samples and inspect shipments before finalizing large orders.
Specification for Scrap Fridge Compressor Product Name: Scrap Fridge Compressor Purpose: The scrap fridge compressor is intended for recycling and recovery of materials from refrigeration units. It is designed to extract valuable metals such as copper, aluminum, and steel, as well as other recyclable components, from old or discarded refrigeration compressors. Dimensions and Weight: Dimensions: Typically measures approximately [insert dimensions] (may vary slightly depending on manufacturer and model). Weight: Varies, but generally ranges from [insert weight range] kilograms (kg). Materials Used: Shell: Steel or cast iron. Internal Components: Copper winding, aluminum wire, steel casing, and potentially other metals depending on the design and age of the compressor. Oil and Refrigerant: May contain residual oil and refrigerant, which need to be properly handled and disposed of according to environmental regulations. Condition: The scrap fridge compressor is generally considered non-functional and is obtained from discarded refrigeration units. It may show signs of wear, corrosion, or damage, typical of used or old compressors. Environmental Considerations: Contains materials that require environmentally responsible disposal or recycling methods. May contain oils, refrigerants, or other substances that are hazardous to the environment if not properly handled. Packaging: Typically sold loose or in bulk for scrap metal processing. Packaging, if any, should be minimal and not contribute to environmental waste. Safety Precautions: When handling scrap fridge compressors, wear appropriate personal protective equipment (PPE) such as gloves and safety goggles to avoid injury and contamination. Ensure compliance with local regulations regarding the handling, transport, and disposal of scrap metal and hazardous materials. Documentation: May come with basic documentation such as the model number (if identifiable), manufacturer (if identifiable), and any other relevant markings or labels that can assist in identifying its origin and composition. Usage: Intended for recycling purposes only. Can be processed to extract valuable metals and materials for reuse in manufacturing. Storage: Store in a dry and secure area away from moisture and direct sunlight to prevent further degradation. Disposal: Dispose of in accordance with local environmental regulations and guidelines. Recycle components where possible to minimize environmental impact. Additional Notes: Variations in specifications and components may exist depending on the specific model and manufacturer of the fridge compressor. Always verify the composition and condition of the scrap fridge compressor before processing or handling. This specification provides a comprehensive overview of the scrap fridge compressor, outlining its intended use, materials, environmental considerations, and safety precautions necessary for handling and disposal.
Specification for Scrap Electrical Motor General Description: The scrap electrical motor shall be an industrial or commercial-grade electric motor that is no longer operational or intended for reuse in its current state. Physical Characteristics: Dimensions: Provide approximate dimensions (length, width, height) of the motor. Weight: Specify the weight range of the motor. Appearance: Describe the external condition (e.g., rust, wear, intact casing). Electrical Specifications: Voltage Rating: Indicate the nominal voltage rating of the motor. Power Rating: Specify the power output in horsepower (HP) or kilowatts (kW). Phase: State whether the motor is single-phase or three-phase. Frequency: Specify the operating frequency (e.g., 50 Hz or 60 Hz). Mechanical Specifications: Type: Describe the type of motor (e.g., induction motor, synchronous motor). Enclosure: Specify the type of motor enclosure (e.g., open, totally enclosed). Shaft: Detail the condition and specifications of the motor shaft (e.g., diameter, keyway). Operational Condition: Functionality: Clarify whether the motor is inoperable or partially functional. Defects: Note any known defects or issues affecting operation. Environmental Considerations: Hazardous Materials: Identify any hazardous materials present (e.g., oil, heavy metals) and their safe handling requirements. Disposal Requirements: Specify disposal guidelines in accordance with local regulations. Packaging and Transportation: Packaging: Describe how the motor will be packaged for transport (e.g., palletized, boxed). Transportation: Provide guidelines for safe handling during transportation (e.g., lifting points, weight limits). Documentation: Certificates and Documentation: Include any certificates or documentation related to the motor's original specifications or hazardous material content. Additional Information: Purpose: State the intended use of the scrap motor (e.g., recycling, parts salvage). Availability: Specify quantity and availability of the scrap motors. Compliance: Regulatory Compliance: Ensure compliance with relevant safety and environmental regulations. Notes: This specification is intended to provide a comprehensive overview of the scrap electrical motor's characteristics and condition. It should be used to accurately assess the motor's suitability for recycling or other intended purposes. Any additional specific requirements should be clearly outlined based on the intended use and local regulatory requirements.
Specification for Scrap Aluminum 6063 Product Name: Scrap Aluminum 6063 Material: Aluminum alloy scraps primarily consisting of AA6063 grade Condition: Clean, uncoated, uncontaminated with other materials Form: Extrusions, profiles, or sheets Should be free of any attachments such as screws, iron, plastic, or other metals Chemical Composition: Aluminum: 98.5% min Magnesium: 0.45% - 0.9% Silicon: 0.2% - 0.6% Iron: 0.35% max Copper: 0.1% max Manganese: 0.1% max Zinc: 0.1% max Titanium: 0.1% max Packaging: Packed in bundles or loose as per agreement Clearly labeled with product details including alloy type and quantity Suitable packaging for transportation and storage Size: Pieces should be of a size convenient for handling and melting Typically in the form of long bars, rods, or sheets Origin: Derived from industrial or consumer aluminum products, processed for recycling purposes Applications: Used as raw material for remelting and casting purposes Suitable for manufacturing aluminum alloys, extrusions, and various industrial products Certifications: Certificate of analysis confirming alloy composition and purity Compliance with international standards (e.g., ISRI specifications) Note: This specification provides a general outline for Scrap Aluminum 6063. Specific requirements may vary based on supplier agreements, regional standards, and customer needs.
Ferro vanadium, caustic soda, scraps, crude oil, hdpe granules, coal, iron ore, copper ore, shredded tyres, flourspar, ferro silicone, ferro manganese, ferro nickel, ferro chrome, ferro titanium, ferro niobium, ferro molybedum, ferro vanadium, ferro born, antracite coke, gas coke, titanuim spoonge, hardwood charcoal, vanadium nitride.
Stainless Steel Raw Materials Coils, Strips & Sheets Grade All 300 & 400 Series Duplex European Mill
Description: UBC scrap refers to Used Beverage Can scrap, which consists of aluminum cans that have been discarded after use. These cans are typically collected for recycling purposes due to the valuable aluminum content they contain. UBC scrap is a crucial raw material in the aluminum recycling industry, contributing significantly to the production of new aluminum products. Specifications for UBC Scrap: Material Composition: UBC scrap consists primarily of used aluminum beverage cans. The cans should be free from any other materials such as plastic, glass, or organic matter. Size and Form: UBC scrap should be compacted or shredded aluminum cans. Individual cans should be flattened or crushed to facilitate handling and transportation. Purity and Contaminants: UBC scrap should have minimal contamination from non-aluminum materials. Contaminants such as food residue, labels, and coatings should be removed to the extent possible. Chemical Composition: Aluminum content should typically be high, with purity levels suitable for recycling into new aluminum products. Alloy specifications may vary depending on regional standards and recycling processes. Packaging and Transport: UBC scrap is usually packaged in bales, bundles, or loose depending on the recycling facility's requirements. Packaging should be suitable for transportation and storage, ensuring minimal damage and loss during handling. Environmental Considerations: UBC scrap should meet environmental regulations regarding recycling and disposal of used aluminum cans. Recycling processes should comply with local environmental standards to minimize environmental impact. Quality Standards: Quality standards for UBC scrap may include specifications on size consistency, cleanliness, and purity levels. Compliance with industry standards ensures the scrap is suitable for efficient recycling processes. Application: UBC scrap is used as a feedstock for aluminum smelting and recycling operations. It plays a crucial role in the circular economy by conserving natural resources and reducing energy consumption compared to primary aluminum production. Testing and Inspection: UBC scrap may undergo testing and inspection to verify compliance with specified standards. Quality control measures may include visual inspection, chemical analysis, and physical testing to ensure suitability for recycling. Market Considerations: Prices for UBC scrap may vary based on global aluminum market trends, demand-supply dynamics, and recycling efficiencies. Market participants include scrap dealers, recyclers, aluminum manufacturers, and industries utilizing recycled aluminum. By adhering to these specifications, UBC scrap can be effectively managed, processed, and recycled to contribute to sustainable resource management and environmental conservation efforts.
Salted butter, unsalted butter, sunflower oil, vietnam jasmine rice, moov creame, moov spray, dettol, heinz, lotus, coffee mate, nido, godiva, mcvities & fmcg products.
"Technical features: Area of production: The slopes of a Mount Etna and Simeto Valley; Planta- tion height: 500-800 mt on sea level; Free acidic content % of oleic acid: from 0.10 to 0.40; Tasting notes Colour: veiled, opalescent with intense green shades; smell: mildly fruity with slightly grass scent; taste: lightly bitter and pungent, with tomato aftertaste Variety of olives blended: Nocellara dellâ??Etna, Biancolilla and tonda Iblea; ripening at the harvest: turning dark; harvest method: by hand with the nets; Milling method: integral continuous cycle system, within 24 hours lt; best to consume: raw especially with roasted meats from harvest Packaging: bottle 0.25-0.50-0.75 lt, on request tin 0.50/1/3/5 l"
"Technical features: Area of production: The slopes of a Mount Etna and Simeto Valley; Planta- tion height: 500-800 mt on sea level; Free acidic content % of oleic acid: from 0.10 to 0.40; Tasting notes Colour: veiled, opalescent with intense green shades; smell: mildly fruity with slightly grass scent; taste: lightly bitter and pungent, with tomato aftertaste Variety of olives blended: Nocellara dellâ??Etna, Biancolilla and tonda Iblea; ripening at the harvest: turning dark; harvest method: by hand with the nets; Milling method: integral continuous cycle system, within 24 hours lt; best to consume: raw especially with roasted meats from harvest Packaging: bottle 0.25-0.50-0.75 lt, on request tin 0.50/1/3/5 l"
"Technical features: Area of production: The slopes of a Mount Etna and Simeto Valley; Planta- tion height: 500-800 mt on sea level; Free acidic content % of oleic acid: from 0.10 to 0.40; Tasting notes Colour: veiled, opalescent with intense green shades; smell: mildly fruity with slightly grass scent; taste: lightly bitter and pungent, with tomato aftertaste Variety of olives blended: Nocellara dellâ??Etna, Biancolilla and tonda Iblea; ripening at the harvest: turning dark; harvest method: by hand with the nets; Milling method: integral continuous cycle system, within 24 hours lt; best to consume: raw especially with roasted meats from harvest Packaging: bottle 0.25-0.50-0.75 lt, on request tin 0.50/1/3/5 l"
PVC is one of the most commonly used materials today, and it is an indispensable material in industries. In addition, PVC is also used to replace some other materials to reduce costs. PVC has very poor strength, so in order to increase the impact resistance as well as ensure the durability of the product, people often add additives such as ABS, MBS .... toughness, plasticizers. PVC is the third most produced and consumed PVC in the world after PE and PP. Original Product PVC Recycled Powder Type Factory Waste Application PVC Recycled Pipe, Window, Board,... Supply Ability 100 Metric Tons per Month Processing Time 15 - 20 days Packaging Jumbo Bag
Aluminum Scrap Specification 1. General Requirements Material: Aluminum scrap, free from iron, steel, and other contaminants. Form: The scrap may be in various forms, including but not limited to, sheets, turnings, castings, extrusions, or beverage cans. Color: Predominantly silver, may include anodized or coated pieces. 2. Quality Standards Purity: Minimum 95% aluminum content. Contaminants: Non-aluminum metals (e.g., copper, zinc): Max 2%. Organic material (e.g., paint, plastic): Max 1%. Moisture: Max 0.5%. Dirt and other non-metallic impurities: Max 1%. 3. Physical Characteristics Size: Sheets: No dimension exceeding 1 meter. Turnings: Free-flowing, dry, with no clusters exceeding 20 cm in diameter. Castings and extrusions: No piece exceeding 50 cm in any dimension. Weight: Scrap should be delivered in bulk or bundled form, each bundle not exceeding 1 metric ton. 4. Packaging Bulk: Loose scrap should be delivered in durable containers suitable for handling and transport. Bundles: Bundled scrap should be securely tied and stable for transport and handling. 5. Delivery Inspection: Material will be inspected upon receipt for compliance with the specified requirements. Documentation: Each shipment should be accompanied by a certificate of analysis indicating the aluminum content and a detailed list of any contaminants present. 6. Safety and Environmental Considerations Handling: Scrap must be free from hazardous materials and handled in a manner compliant with local safety regulations. Environmental: Supplier must adhere to all relevant environmental regulations regarding the recycling and transport of aluminum scrap.
Dark Black colour PVD titanium coated Stainless steel sheets, Mirror finish. UAE. 1.2 mm thick, 304 grade.
WE ARE SUPPLYING FROM INDIA AND FAR EAST
Specification for Aluminum Scrap 1. Scope This specification defines the quality and requirements for aluminum scrap intended for recycling and manufacturing. It ensures consistency, quality, and suitability for various applications. 2. Material Requirements 2.1. Composition Aluminum Content: Minimum 90% by weight. Contaminants: Maximum 2% by weight of non-aluminum metals (e.g., steel, copper). Maximum 1% by weight of non-metallic materials (e.g., plastic, rubber). Moisture content should not exceed 2% by weight. 2.2. Form and Condition Types: Can include profiles, sheets, turnings, wire, and castings. Size: Must be manageable for handling and processing, typically not exceeding 1 meter in any dimension. Cleanliness: Free from excessive oil, grease, and other foreign substances. 3. Packaging and Labeling Packaging: Scrap should be securely packaged or bundled to prevent scattering and contamination during transport. Packaging materials should not contaminate the scrap. Labeling: Each package should be clearly labeled with: Supplier name and address. Net weight. Scrap grade and type. 4. Inspection and Testing Visual Inspection: Performed to check for visible contaminants, appropriate size, and cleanliness. Chemical Analysis: Periodic testing to verify aluminum content and contaminant levels. Moisture Test: Conducted to ensure moisture content compliance. 5. Documentation Certificate of Analysis (CoA): Provided with each shipment, detailing the chemical composition and confirming compliance with this specification. Bill of Lading: Including details of the shipment, weight, and scrap grade. 6. Compliance and Rejection Compliance: All supplied scrap must meet the requirements outlined in this specification. Rejection: Material not meeting these requirements will be subject to rejection and return at the supplier's expense. 7. Safety and Handling Handling: Appropriate safety measures should be taken to prevent injury or contamination during handling and transportation. Personal Protective Equipment (PPE): Workers must use suitable PPE, including gloves and eye protection. 8. Environmental and Regulatory Considerations Compliance: Must comply with all relevant local, national, and international regulations regarding waste and recycling materials. Environmental Impact: Suppliers are encouraged to follow environmentally friendly practices in the collection and processing of aluminum scrap.