UAE Enamel Paint Suppliers and Manufacturers

EQUINAS TFO 60u High Quality Un-Inhibited Transformer Oil EQUINAS TFO 60u is a high-quality un-inhibited insulating oil with very good dielectric properties and oxidation stability intended for transformers, switchgears, and other electrical equipment. Transformer Oil is a series of products blended using highly refined mineral oil and a selected antioxidant. It is designed for insulating and cooling transformers, oil-immersed switchgear and other electrical insulating applications. Does not contain harmful polychlorinated biphenyls (PCBs). Applications: Used as an insulating oil in transformers, switchgear, inductors, condensers, transducers, and similar equipment, also at low temperature in outdoor use It insulates current-carrying parts from each other and from ground, carries away heat, prevents glow discharges, extinguishes electric arcs in switchgear, and impregnates insulating materials Features and Benefits: Excellent insulating properties High dielectric strength (1) Low power factor Resists oxidation and deposit formation Excellent low-temperature properties Compatible with materials used in transformers Does not contain any PCBs Meets or exceeds the IEC 60296 Packages size: Available in drums and flexibags Health and Safety: Based on available information, this product is not expected to produce adverse effects on health when used for applications referred to above and the recommendations provided in the Safety Data Sheet (SDS) are followed. The SDS is available upon request through our sales contact office. This product should not be used for purpose other than the applications referred to above. If disposing of used product, take care to protect the environment, follow the local rules and regulations of your local Authority.

EQUINAS TFO 60i High Quality Inhibited Transformer Oil EQUINAS TFO 60i is a high-quality inhibited insulating oil with very good dielectric properties and oxidation stability intended for transformers, switchgears, and other electrical equipment. Transformer Oil is a series of products blended using highly refined mineral oil and a selected antioxidant. It is designed for insulating and cooling transformers, oil-immersed switchgear and other electrical insulating applications. Does not contain harmful polychlorinated biphenyls (PCBs). Applications: Used as an insulating oil in transformers, switchgear, inductors, condensers, transducers, and similar equipment, also at low temperature in outdoor use It insulates current-carrying parts from each other and from ground, carries away heat, prevents glow discharges, extinguishes electric arcs in switchgear, and impregnates insulating materials Features and Benefits: Excellent insulating properties High dielectric strength (1) Low power factor Resists oxidation and deposit formation Excellent low-temperature properties Compatible with materials used in transformers Does not contain any PCBs Meets or exceeds the IEC 60296 Packages size: Available in drums and flexibags Health and Safety: Based on available information, this product is not expected to produce adverse effects on health when used for applications referred to above and the recommendations provided in the Safety Data Sheet (SDS) are followed. The SDS is available upon request through our sales contact office. This product should not be used for purpose other than the applications referred to above. If disposing of used product, take care to protect the environment, follow the local rules and regulations of your local Authority.

ETRO 6+ is a high quality Group III+ base oil, manufactured from a unique feedstock by using a proprietary hydrotreatment and wax isomerization process and is hydrofinished to a colourless liquid. The base oil is highly isoparaffinic and exhibits a very high viscosity index as well as superior low temperature performance. It has an excellent viscosity-volatility relationship. Applications: ETRO 6+ is an excellent choice for formulating cost effective, high performance, low-viscosity engine oils due to its superb viscometrics and low volatility. This base oil is also suitable for application in industrial equipment, such as compressors, hydraulic systems, gears and turbines. Features and Benefits: Very high viscosity index Excellent volatility for low viscosity engine oils Superior low temperature performance Good oxidation stability Formulation Support: ETRO 6+ is supported with top-tier engine oil formulations that meet the requirements for: API SN ILSAC GF-5 ACEA 2012* OEM Specifications

ETRO 4+ is a high quality Group III+ base oil, manufactured from a unique feedstock by using a proprietary hydro-treatment - and wax isomerization process and hydrofinished to a colourless liquid. The base oil is highly isoparaffinic and exhibits a very high viscosity index as well as superior low-temperature performance. It has an excellent viscosity-volatility relationship. Applications: ETRO 4+ is the preferred choice for formulating cost effective, high-performance, low-viscosity engine oils due to its superb viscometrics and low volatility. This base oil is also suitable for application in industrial equipment, such as compressors, hydraulic systems, gears and turbines. Features and Benefits: Very high viscosity index Excellent volatility for low-viscosity engine oils Superior low-temperature performance Good oxidation stability Formulation Support: ETRO 4+ is supported with top-tier engine oil formulations that meet the requirements for: API SN ILSAC GF-5 ACEA 2012* OEM Specifications

The Rust-Oleum Stops Rust . Protective Enamel Spray Paint helps prevent rust and dries in approximately 120 minutes. For use with metal, wood and concrete, this paint can be used both indoors and outdoors and provides coverage for up to 15 sq. ft. This paint features an army green color and gloss finish. Oil-based enamel formula provides protection, coverage and durability on indoor and outdoor projects Designed for metal also works on wood, concrete and masonry Dries in about 2 hours . can provides coverage for up to 15 sq. ft. Comfort tip with a wider finger pad to reduce fatigue; any-angle spray feature that allows you to spray in any direction, even upside down Rust-resistant formula applies protection to metal surfaces Superior rust prevention which provides lasting protection and beauty for projects Bright glossy finish in a range of original equipment colors

The product is an alkyd based air dring flat enamel having a very smooth finish. It contains Rutile grade titanium dioxide, other fast inorganic /organic pigments & hard,durable inert extenders. On cure the product forms a very tough, durable film with very good hiding power.

"A High gloss enamel based long oil alkyd modified with additives for imparting non-yellowing property. The product contains high percentage of Rutile titanium dioxide & other light fast pigments for improved color fastness & high opacity. Special surface additives in the formulation make the product tough and fast drying."

A quick drying gloss paint designed for use in steel scaffolding. The product is formulated with co-polymer alkyd & heat resistant pigments. It can be applied by conventional/electrostatic spray, dipping & by brush over a small area. The product is available in silk matt finish also.

A Solvent borne single pack thermoplastic acrylic resin with good water, chemical & weather resistance. The Product is based on Rutile grade titanium dioxide & high quality pigments & extenders to bolster weather & chemical resistance. The product is designed to perform as anti-carbonation coating when used as topcoat in Texo Tile hybrid system.

12cans per carton. High quality. 12cans x 16oz/per ctn.

The RustOleum Specialty 12 oz. High Heat Aerosol Paint works well on grills, wood burning stoves, engines and other metal items. It comes in a variety of colors and is great for use in temperatures up to 1,200 degrees Fahrenheit. The paint is rust and corrosion resistant for durability. PRODUCT FEATURES : Brand : RustOleum Model Number : 7716830 Color : Enamel Silver Type : Spray Paint Sube Type : Satin Weight : 12 oz. Details : Oil based formula resists heat up to 1200 degrees Fahrenheit For use on grills, wood burning stoves, engines and other objects that are exposed to high temperatures May recoat within 1 hour or after 48 hours, allow paint to dry 1 hour before heating, dries to the touch in 1/2 hour and to handle in 1 to2 hours 12 oz. can provides coverage for up to 15 sq. ft. Easy application Flat finish Rich satin finish Provides RustOleum Stops Rust protection No primer necessary Fast drying. Dry to touch in 30 minutes Oil based formula helps prevent rust, corrosion and chipping

Spray Paint Made by advance petroleum techniques and gives an even fine spraying surface. 100% Acrylic Resin and CFC Free. Possesses multiple strengths including water-resistant hard, soft, durable and abrasion-resistant of strong adhesion, widely use in spraying and repairing of the surface of the metal, wood, glass, plastic and etc

Wellcoat Double Strength Paint Remover is a solvent stripper specially designed to quickly remove paint, stickers and decals from metal, wood, and plastic surfaces.

Caparol Paints LLC is a one-stop destination for stone finish paints, primer paints, epoxy paints and emulsions in the UAE.

1. Characteristics - Appearance Method - Visual Unit - Result - Bright & Clear 2 . Characteristics - Color Method - ASTM D 1500 Unit - ASTM Color Result - 2.5 3 . Characteristics - Density @ 15.6 Method - ASTM D 1298 Unit - G/CM3 Result - 0.868 4 . Characteristics - Kinematic Viscosity @ 100 Method - ASTM D 455 Unit - MM2/S Result - 15.92 5 .Characteristics - Kinematic Viscosity @ 40 Method - ASTM D 455 Unit - M2/S Result - 107.38 6 . Characteristics - Viscosity Index Method - ASTM D 2270 Unit - Result - 158.47 7. Characteristics - Pour Point Method - ASTM D 97 Unit - Result - -6 8 . Characteristics - Flash Point Method - ASTM D 92 Unit - Result - 192