Specification Value Test Method Penetration @25°C 45 IS 203 Absolute Viscosity @60°C, Poises 2400-3600 IS 1206 Kinematic Viscosity @60°C, Poises 350 IS 1206 Softening Point °C 47 IS 1205 Flash Point °C 220 IS 1448 Solubility in CS2 %wt. 99.0 IS 1216 Test on residue from rolling thin film oven test Viscosity Ratio @60°C 4 IS 1206 Ductility @25°C 40 IS 1208 VG-30 is primarily used to construct extra heavy duty Bitumen pavements that need to endure substantial traffic loads. It can be used in lieu of old 60/70 Penetration grade
Specification Value Test Method Penetration @25°C 35 IS 203 Absolute Viscosity @60°C, Poises 3200-4800 IS 1206 Kinematic Viscosity @60°C, Poises 400 IS 1206 Softening Point °C 50 IS 1205 Flash Point °C 220 IS 1448 Solubility in CS2 %wt. 99.0 IS 1216 Test on residue from rolling thin film oven test Viscosity Ratio @60°C 4 IS 1206 Ductility @25°C 25 IS 1208 VG-40 is used in highly stressed areas such as intersections, near toll booths and truck parking lots in lieu of old 30/40 Penetration grade. Due to its higher viscosity, stiffer Bitumen mixes can be produced to improve resistance to shoving and other problems associated with higher temperature and heavy traffic loads.
HYDRAULIC OIL HVI ZF 68 ISO 68 range of lubricants are high viscosity index anti-wear hydraulic fluids formulated with high quality HVI base stocks and advanced anti-wear additive technology. They are designed to work efficiently in hydraulic & fluid power transmission systems, subjected to wide temperature ranges operating under severe conditions. These oils are available in ISO viscosity grades from 15 to 150.
HYDRAULIC OIL HVI ZF 46 ISO 46 range of lubricants are high viscosity index anti-wear hydraulic fluids formulated with high quality HVI base stocks and advanced anti-wear additive technology. They are designed to work efficiently in hydraulic & fluid power transmission systems, subjected to wide temperature ranges operating under severe conditions. These oils are available in ISO viscosity grades from 15 to 150.
LUBENZ IND SPINDLE OILare formulated from select high-quality, low viscosity base oils and additives that impart good resistance to oxidation and protection from rust and corrosion. They possess very good resistance to foaming and separate readily from water. Specifically designed for the lubrication of high-speed spindles in machine tools. They are also used in some critical hydraulic, circulation systems and airline oilers where the appropriate viscosity grade is selected. for more information, please contact us.
Bentonite is used during drilling and tunneling fluids to lubricate and cool cutting tools, remove cuttings and help prevent blowouts. It is a common component in drilling mud used to curtail drilling fluid invasion through its propensity to aid in the formation of mud cakes. Bentonite API Grade is used to increase viscosity and reduce fluidâ??loss in waterâ??base drilling fluids. It is a costâ??effective means of achieving viscosity, fluidâ??loss control, and filterâ??cake quality in freshwater and seawater mud.
Silk, linen and cotton fabric and silk waste, cow dung cake.Manufacturer
Specification Value Test Method Penetration @25°C 80 IS 203 Absolute Viscosity @60°C, Poises 800-1200 IS 1206 Kinematic Viscosity @60°C, Poises 250 IS 1206 Softening Point °C 40 IS 1205 Flash Point °C 220 IS 1448 Solubility in CS2 %wt. 99.0 IS 1216 Test on residue from rolling thin film oven test Viscosity Ratio @60°C 4 IS 1206 Ductility @25°C 75 IS 1208 VG-10 is widely used in spraying applications such as surface-dressing and paving in very cold climate in lieu of old 85/100 Penetration grade. It is also used to manufacture Bitumen Emulsion and Modified Bitumen products
LUBENZ HOXX PLUS HYDRAULIC OIL HVI ZF range of lubricants are high viscosity index Zinc Free Ashless anti-wear hydraulic fluids formulated with high quality HVI base stocks and advanced very low ash anti-wear additive technology. They are designed to work efficiently in hydraulic & fluid power transmission systems, subjected to wide temperature ranges operating under severe conditions. These oils are available in ISO viscosity grades from 15 to 150. Moreover, they are also designed to work in systems where high hydrolytic stability is required, even in presence of high moisture content in hydraulic systems. for more information, please contact us.
LUBENZ SP SEWING MACHINE OIL range of lubricants are premium quality oils specifically formulated for the lubrication of high-speed machine elements in industrial sewing machines. These oils are formulated from very high quality hydro-treated, low viscosity base oils and optimum additive technology system to provide improved thermal, oxidation and color stability. They are available in three viscosity grades,LUBENZ SP SEWING MACHINE OIL 10 (ISO VG 10), SM 15 (ISO VG 15) and SM 22 (ISO VG 22). for more information, please contact us.
Long alkyd 160x is a high viscosity resin. Gives good color, radiant gloss, excellent brush-ability, and rapid set and through drying. Long alkyd 160x, is soya bean oil, yellowing resistance, high brush ability, excellent pigment wetting, high gloss retention, good adhesive and mechanical properties. Suggested in decorative enamel paints for internal and external applications. Solids% (+1-1)60 - solventwhite spirit, oil typesoya bean oil, oil length55 Color gardener - hellige3 max. 50% in white spirit , viscosity (gardener hotdt a 2)z3-z5, acid value (on solids)
Long alkyd 170x is a high viscosity resin. Gives good color, radiant gloss, excellent brush-ability, and rapid set and through drying. Long alkyd 170x, is based on soya bean oil, yellowing resistance, high brush ability, excellent pigment wetting, high gloss retention good adhesive and mechanical properties. Suggested in decorative enamel paints for internal and external applications. Solids% (+1-1) 70 , solventwhite spirit, oil typesoya bean oil, oil length62, color gardener - hellige 3 max. 50% in white spirit, viscosity (gardener hotdt a 25c)z2-z4 Acid value (on solids)
Medium alkyd 160x is a high viscosity resin. Gives good color, radiant gloss, excellent brush-ability, and rapid set and through drying. Medium alkyd 160x, is soya bean oil, yellowing resistance, fast drying and high performance for enamel and industrial paints. Excellent outdoor durability, high glossy finishing. It is also suggested for road marking and quick dry paints. Solids% (+1-1) 50, solventwhite spirit, oil type soya bean oil, oil length 48, color gardener - hellige 3 max, viscosity (gardener hotdt a 25c) z2-z4, acid value (on solids)
LUBENZ ULTRA NANO LITHIUM COMPLEX GREASE are high performance greases, formulated with lithium complex based thickeners, high viscosity index base oils and extreme pressure additive system to provide excellent protection against wear, rusting and water washout. They are available in NLGI grades ranging from 00 to 3 with base oil viscosity of ISO VG 220. They are suitable for most types of Automotive and Industrial applications, including heavy-duty Marine applications where high temperatures, heavy loads and extreme unit pressures are present. EP 1, 2, 3 & 2 Moly greases are suitable for operating temperatures range from -20�°C to 140�°C, while EP 00 & 0 greases are suitable for operating temperatures ranging from -25�°C to 130�°C. for more information, please contact us.
LUBENZ VISTA AUTOMATIC TRANSMISSION FLUID A TYPE A (ATF DEXIII-CVT) is a high performance automatic transmission oil, formulated with high quality base stocks, shear stable viscosity index improvers and advanced additive system to meet or exceed the requirements of General Motors for Type A specification. Suitable for passenger cars and commercial automatic transmissions, for use in applications like power steering systems, hydraulics and some manual transmissions where automatic transmission fluid is specified. for more information, please contact us.
LUBENZ ULTIMATE HIGH TEMPERATURE CLAY BASED GREASE are high temperature greases, formulated with bentonite clay based thickener and extreme pressure additive system to provide extra protection against wear, rusting and water washout especially in industrial equipment operating under heavy loads and high temperatures. They are available in NLGI grades ranging from 00 to 3 with base oil viscosity of ISO VG 150 & 320. It retains its consistency at high temperatures and provides good storage stability. for more information, please contact us.
Bentonite is used in paint, enamel, printing ink, and oil paint because they have the characteristic of absorbing colors and dyes. Bentonite is fine-grained enough to form a continuous suspension. Desire results are obtained by mixing 1 unit of bentonite with 20 units of water together with the addition of chalk to give the desired viscosity in watery and whitewashed. 5% bentonite is also added to improve the suspension properties of the oil dyes. Sodium bentonite is the reason for being preferred in the paint industry due to its ability to form suspensions continuously at high speed.
Brand: Total (France) Kinematic Viscosity: 150 Volume: 208 L Package: Factory sealed Pour point, C: -6 Description: Mineral oils with specific high performance additives designed to lubricate screw and reciprocating air compressors. Applications: For use in conditions where the discharge temperature does not exceed 1000 C, otherwise the use of synthetic oils is preferred. Specification: ISO 6743-3 classified DAG and DAB for heavy duty applications. DIN 51 506 VD-L for the use in reciprocating air compressors DACNIS 150 Manufacturer approvals: Depending on the viscosity grades, Dacnis meet the requirements of: BAUER, CIRRUS, COMPAIR, DRESSER RAND, NEUENHAUSER, SAUER & SOHN, SULZER BURCKHARDT, TANABE etc. Features and benefits: DACNIS oils contain high performance additives to: avoid the carbon build up. allow a good oil/air and oil/condensates separation. anticlogging property that ensures the efficiency of the filters during a long period protect components against wear and corrosion. The use of DACNIS allows real cuts in the operating costs of the compressed air production facility by optimizing the compressor efficiency. Extending the service life of the separating filter elements.
SCOPE PEGASO SN SCOPE PEGASO Fully Synthetic Oil has been formulated for latest on-road, high-performance and turbo-charged, inter-cooled direct injection high performance gasoline and diesel engines with normal SAPS passenger car portfolio. It provides outstanding protection against engine wear under high-temperature and high engine speed conditions. It is blended from synthetic base components, highly shear stable viscosity modifiers and premium tier additive package. Suitable for ACEA 2012 normal SAPS requirements formulations.
Based on cocunut oil fatty acids. Short alkyd 150p exhibit excellent hardness, yellowing resistance in nitrocellulose coating , it imparts good flexibility. Short alkyd 150p, is cofa resin, yellowing resistance, high durability, excellent pigment wetting, high gloss retention, dry fast and high reactive when cross linked with polyisocianates. It is also suggested to use with pu coating. Solids% (+1-1) 68, hydroxyl value 120-130, solvent xylene, oil typecofa, oil length38 Color gardener - hellige1 max, viscosity (gardener hotdt a 25c) z-z2, acid value (on solids)10-15
