In modern architecture becomes more popular the translucent constructions of the complex architectural forms. Cities look defines, in many aspects, the elegant systems of the high-rise building facades glass cover. Nowadays it is very difficult to find such building material as bent tempered glass, which would be so suitable for decision of the modern construction types. Tempered glass constitutes flat glass, subjected special thermal treatment tempering, in result of witch in glass volume arise naturally distributed internal tensions, witch enlarge mechanical glass strength and provide special (safe) character of its destruction. Increase of mechanical strength (while bend can reach 250 mpa that is five times higher than in usual flat glass) stipulates increase of glass thermal resistance in 3-4 times (since 40 till 180 0c). Flat glass has thermal resistance by 40 0c, tempered glass by 180 0c, that prevents tempered glass from destruction while overheating and temperature difference. It is very important while using in external glass cover by toned and reflex glasses with absorption factor of thermal energy more than 25 %, when glass can get hot till 90 0c. In europe, lately, is widely spread the use of tempered glass with the purpose of safety, longevity and reliability. Bent tempered glass almost does not differ from tempered flat glass, the difference becomes apparent only on the final stage of the process. Glass after heating section comes to tempering section, where in a short period of time flat glass bends by the forming rollers. The forming rollers are usually set according to the radii models and forms. USE: Structural flat glass cover of buildings façades Shops and supermarkets windows Partitions in apartments and offices Glass doors Saunas doors (tempered glass stands perfectly heat strokes) Stairs and parapet fences Roofs, roof visors Winter gardens building Electric and gas ovens doors Escalators side supporting planes. Our company can offer: Tempering of clear float glass, thickness: from 4 till 19 mm Tempering of toned on the whole glass Tempering of reflex (sun protective) glass.
Orion-Glass Ltd produces glass that is widely used in the architecture and building. Architectural glass cover this is the opportunity to change the external building view by using modern technologies and materials. In modern architecture becomes more popular the translucent constructions of the complex architectural forms. Cities look defines, in many aspects, the elegant systems of the high-rise building facades glass cover. Nowadays it is very difficult to find such building material as bent tempered glass, which would be so suitable for decision of the modern construction types. During last ten years glazing became one of the most popular methods in modern architecture. In the architecture in glass industry is widely used a great spectrum of implantations - (structural glass cover, plate, toned and bent glass). Architectural glass is widely used in building for the external glass cover (buildings facades, shop windows, winter gardens, windows, doors, trading pavilions, bus stops and so on) and in internal building and construction decorating (office partitions, check-points, stairs fences, stained-glass windows, floors). Modern building market suggests façades glass cover by using aluminum profiles. Such constructions, due to its practicality, are very popular among those, who want to add attraction in the houses and in the offices using stylish and lone-lived façade. Architectural buildings surprise the spectator of the transparency and lightness of its constructions. But using of usual glass while building high constructions is not safe, that is why the architectures and builders use the products of the modern technologies - tempered glass. Due to its unique properties and rather high level of safety (in comparison with usual glass), tempered glass became more popular in different fields. For example, in modern building this material is successfully used while glass cover of the constructions of any difficulty including many-storied buildings facades, stairs fences, translucent roofs and floors; while balcony and loggia glass cover, bus stops, while producing of the shop windows and stained-glass windows. Today tempered glass became more and more popular in offices and public buildings. Tempered glass is used for producing of the counter reception, office partitions, counters for booklets and periodical. Using in building of the high-test tempered glass this is not only the tribute to the fashion and progress, but also the opportunity to save the balance between beauty and safety.
Company LLC "FanCoil Ukraine" specializes in producing and selling modern, cost-effective, high quality and easy to use equipment. Namely-floor convectors and underfloor TM FANCOIL. Our company has more than 10 years, is a competent and reliable partner for our customers. Heating system FANCOIL - are water heaters based on natural or forced air circulation. Some models of the convectors used not only for heating, but also cooling. Also benefits convectors TM FANCOIL are very quiet operation, space-saving installation in the room, powered by a standard electrical outlet, the lowest temperature of the heated surface, moisture resistance, the use of valves and so on. Thanks to all the benefits, convector perfectly suited for installation under windows having panoramic glazing weatherstrip or low space under the doors, terraces, conservatories and indoor swimming pools, showrooms, business centers, residential cottages and apartments with panoramic windows. The heating system is FANCOIL heaters connected to classical heating system. Basic equipment convectors as follows: • box (making possible options: fiberglass, metal powder-coated); • copper-aluminum heat exchanger; • flexible connection hoses with shut-off valves; • tangential fans (in models with forced convection) Optional equipment: • oak grill or duralumin (different colors, roll or longitudinal) • Electronic room thermostat; • converter transformer 220v to 12v, with a built-smooth control fan speed (T35, TR-70, TR-150, TR-300); • converter transformer 220v to 24v, with a built-smooth control fan speed (TR-30, TR-45, TR-75, TR-120); • smooth speed control of fans. Because of design features and requirements, availability of copper-aluminum heat exchangers, fans (for forced convection) - heating (or cooling) Improvement happens very quickly, unlike traditional steel or cast iron radiators. An advantage over the conventional radiators is that they contain 10 times less water resulting in heat convectors is not accumulated. Heating system heats FANCOIL almost instantly so you can quickly respond to changes in room temperature and maintain a constant level. Furthermore, even at a low temperature in heating convectors provide optimal heat transfer. These features allow you to reduce the load on heating equipment. Convectors provide a more uniform distribution of heat in the room, as opposed to steel and cast iron radiators that have a warmer zone is directly from the devices themselves. Even heat distribution prevents condensation and mold formation, and the use convectors facing windows to avoid misting. Convectors TM FANCOIL produced in standard sizes as well as to the individual requirements of clients (radius, angle, etc.) All products are made from high quality materials, making available long warranty on parts convectors: • box of fiberglass-50 years • box with powder coating 10 years • wooden box (floor) - 2 years • copper-aluminum heat exchanger 10 years • aluminum grille-5 years • wooden lattice - 1 year • electrical parts - 5 years • valves - 1 year Low pricing, flexible system of discounts and deadlines of manufacture and delivery of products do TM FANCOIL interesting and comfortable for both the individual user and for wholesale customers. List some objects equipped convectors TM FANCOIL, as well as the price of retail prices of products attached to the letter. 9kg for 1 m.P sizes upon request
Decorative 3D Wall Plaster Panels for commercial, residential and public spaces such as shopping malls, shops, hotels, offices, houses, cinemas, restaurants, airport lounge, and many more. The original design of textured plaster panels makes any interior so cozy, modern and luxurious. This will not only impress but also increase the price of the owners property. Light gypsum is an innovative technology BeautyWalls, which allows you to produce unique products. The panels are 40% lighter and stronger, meaning their transportation cheaper and operation more reliable. Panels are with additional of soundproofing and heat-insulating properties. Gypsum is ecologically natural material, that self-regulates the humidity in the room. Gypsum panels absorb excessive humidity, but if lacking it, they give it back. Thus, the walls breathe in & out, maintaining the optimal microclimate in the room, which is beneficial to health. 3D Plaster Panels are easy to mount and paint in any color following the installation instructions. At this moment, BeautyWalls isexpands trading network and is looking for new partners: exclusive distributors, wholesalers, DIY Networks, retailers, online stores in Europe, North America and South America, Africa, Asia, Australia / Oceania. Your walls can more!
3D wall plaster panels.
Bamboo Panels.
100% Compostable Bags From The Manufacturer Min. Order is 1 pallet (roughly 6,000 eur) Customisation available Perfect for eco-friendly retail chains Reach out for details!
Saw timbers of larch, oak, beech and ash, , edged boards, wall panels, planed timbers, pallet blanks, pallets.
RichOil is Leading in Europe and the largest Ukrainian producer of direct pressed oils and healthy food products. We produce high quality cold pressed oils for sale in retail, pharmaceutical chains and health food stores. We use traditional processing technology and exclusively natural ingredients. in Ukraine we are working with our own trade mark: OLIBO. Also Possible Private Labeling and Wholesale
Small-class intercity bus on the basis of Isuzu units. This bus mostly meets the requirements of the route network with existing passenger traffic and the required efficiency to cost of passenger kilometers. The model worked well on city routes in Ukraine, Belarus, Moldova, Azerbaijan, Armenia, Kazakhstan, Georgia, Russian and other countries. TOTAL INFORMATION Function = Suburban and intercity passenger transportation MAIN CHARACTERISTICS Axels = 4Ñ?2 Length / width / height in view of the air conditioner, mm = 8220/2320/2700 Wheelbase, mm = 4395±5 Front/Rear track, mm = 1900±10/1650±10 Ground clearance, mm = 160 The height of the step above road level, mm = 320 Gross weight, kg = 8850 Curb weight, kg = 5840 The volume of baggage compartments in m3 = 2,7 Turning radius, m = 7,7 ENGINE ISUZU, Type Diesel, Location - Front, longitudinally Cooling system = Liquid TRANSMISSION = ISUZU, manual, synchronized CHASSIS = ISUZU, Japan STEERING = ISUZU, Japan SUSPENSION: Front suspension = Dependent, spring Rear suspension = Dependent, pneumatic spring Tires / Wheels 6Ñ?17,5; 215/75R17.5 BRAKE SYSTEM = Hydraulics with vacuum booster, dual disc brakes on the front axle and the rear axle Parking brake system = With block brake acting on the transmission. Mechanical Drive Secondary brake system = Gasdynamic on the exhaust system Emergency brake system = Each of the circuits of the service braking system Number of doors for passengers = Some single-door service and one spare single leaf doors on the right side of the body, the driver's door on the left side of the body INTERIOR The total passenger capacity, pass = 38/28 Seating places = 29+1 or 28+1 Cabin height, mm = 1900 Heating system = Liquid, combined by the auxiliary heater connected to the engine cooling system and the type of convector heaters installed in the passenger compartment Ventilation system = Supply and exhaust through the vents and hatches Type of seats = semi-soft
Wooden beech kitchen stools and chairs, kids beech wood stools, chairs and tables, beech wood slatted bed frames, beech wood seats and backs for the chairs.
GALAX das Desinfection Concentrated disinfectant 4000g. A wide spectrum of antimicrobial action active against all types of pathogenic microorganisms, viruses, fungi, spores, mycobacterium tuberculosis, and others. For decontamination of all types of surfaces (floor, walls, doors, windows, surfaces of appliances, etc.), clothing, cleaning equipment, during general cleaning, hairdressing and manicure accessories, etc. Composition: silver - 250 mg / dm3, copper - 250 mg / dm3, organic acids, distilled water. Directions for use: Shake the bottle well before use. To prepare a solution in a volume of 1 liter, dilute the product with drinking or purified (distilled or deionized) water at room temperature in the ratio: for infections of bacterial etiology - 70 ml of the product for 930 ml of water, for infections of viral etiology - 100 ml of the product for 900 ml of water.
New City low-floor bus on the basis of ISUZU units which produced based on global rules and requirements of bus: - compliance with environmental standards EURO-5 - with two double doors and accumulation area in the front and back of the bus for enhanced exchange of passengers - with the possibility of transportation of persons with disabilities of movement - full compliance with the UNECE Regulations 107 - the presence of air conditioning for the driver and passengers SPECIFICATIONS OVERALL DIMENSIONS Length, mm = 8220 Width, mm = 2320 Height, mm = 2700 Wheelbase, mm = 4395 Front track, mm/Rear track, mm = 1900/1650 Minimal turning radius, m = 12,5 Fuel tank capacity, l = 118 SEATING CAPACITY Number of seating positions, excluding crew member = 14-17 (optional +4 folding) Full capacity (with driver) = 49-52 WEIGHT Curb weight, kg = 5240 Gross weight, kg = 8755-8780 AIR CONDITIONING AND HEATING SYSTEM Interior heating, Liquid, combined by the auxiliary heater connected to the engine cooling system and radiator-type heaters installed in the passenger compartment, Ventilation system, Supply and exhaust vents through the side windows and roof hatches; tyres: 6Ñ?17,5; 215/75R17.5 AXLES Manufacturer Isuzu SUSPENSION Front - Dependent, spring Rear - Dependent, air springs STEERING with hydraulic booster BRAKE SYSTEM Working Brake- Hydraulics with vacuum booster, dual disc brakes on the front axle and the rear axle Parking-brake - With block brake acting on the transmission. Mechanical gear Secondary brake - Gasdynamic on the exhaust system Emergency contracting brake - Each of the circuits of the service braking system ABS Category I ENGINE = Isuzu, 4HK1-Ð?5NС, Diesel, common rail, four-stroke, with turbocharger and intercooler: EURO-5 Engine displacement, sm3 - 5,193 Power, kW (hp)/rpm - 114 (154) Torque Nm (kgs.m)/rpm - 419 (42,8) Control fuel consumption l/100 km and no more than: at a constant speed of 60 km/h - from 14,5 l/100 km Cooling system - liquid TRANSMISSION - Isuzu, MYY6S mechanical, synchronized in all forward gears ADDITIONAL SYSTEMS Vehicle Stability Control (EVSC), System of onboard diagnostics (OBD), Traction control system (ASR), Maximum speed fith full load, km/h - 90
KROK WOOD is relatively young company, which is around 7 years on the furniture market, but even in this short term we managed to gain nice reputation of the reliable producer, which can be proven by thousands of positive reviews from our customers on Amazon and on our website. Currently we are looking for the new customers and are able to offer not only eco products from our current assortment, but also to produce the new products according to the customer's requirements. Last week we launched the new production line, which can make coloured furniture as well. Also we can produce worktops from solid beech.
Plastic moldings for the interior: plinths for the floor, moldings for walls, decorative corners for doors....
Glass fiber products and insulating materials.
We offer wholesale moldings for framing pictures, photos, mirrors, souvenirs and other items. We are a Ukrainian manufacturer, we have been making plastic moldings for almost 10 years. We guarantee quality, speed of delivery and decency.
Stained glass, glass painting, decorative glass panel, stained glass windows, glass wall art, stained glass panel, mirrors.Manufacturing
Plastic moldings for making decorative frames for paintings, mirrors and photographs, photo frames and decorative moldings for the interiorplinths, cornices, door handles, decorative moldings for walls..Production
Handicrafts items like vases, frames and pots.