Product Description Standard Product Price of product ( USD price or FOB price) : To be negotiated (CIF, L/C) Product origin : Russian Key Specifications/Special Features : "Basis: Composition % Nitrogen: 6% Methane: 83% Ethane: 7% Propane: 2% Butane: 1% C5+: 1% Total: 100%" Minimum Order Size and Packaging details : To be negotiated
Aviation Jet Fuel is a type of aviation fuel designed for use in aircraft powered by gas-turbine engines. It is colourless to straw coloured in appearance. The most commonly used fuels for commercial aviation are Jet A and Jet A1, which are produced to a standardised international specification. The only other jet fuel commonly used in civilian turbine-engine powered aviation is Jet B, which is used for its enhanced cold-weather performance. Jet fuel is a mixture of a variety of hydrocarbons. Because the exact composition of jet fuel varies widely based on petroleum source, it is impossible to define jet fuel as a ratio of specific hydrocarbons. Jet fuel is therefore defined as a performance specification rather than a chemical compound. Aviation Jet Fuel is commonly referred to as JP54. However, this is the wrong terminology as there is no such grade of Jet Fuel. Jet A and Jet A1 are what refineries offer. Aviation Jet fuel Gas is what powers turbine aircraft engines. Worldwide, Jet Fuel is the most used low Sulphur content Kerosene. For instance, Colonial JP54 is similar to Jet A except the energy is 18.4 mj/Kg compared to the 42.8 MJ/kg of Jet A. Most importantly there is also a slight difference in additives. Aviation Jet Fuel B is used for its extremely cold weather performance. However, aviation Jet fuel Bs lighter composition makes it more dangerous to handle. For this reason, it is rarely used except in very cold climates. A blend of approximately 30% Kerosene and 70% Gasoline. Because of its very low freezing point (60 C (76 F), it is known as a wide cut fuel and has a low flash point as well. Aviation Jet Fuel B is primarily used in some military aircraft. In Canada, it is also used because of its freezing point. Aviation Kerosene standards are published as GOST10227-86. The standard consists of different properties. It separates paraffin and gasoline in the refinery. Military organisations around the world use a different classification system of JP (for Jet Propellant) numbers. Some are almost identical to their civilian counterparts and differ only by the amounts of a few additives. For instance, Jet A1 is similar to JP 8, Jet B is similar to JP 4. Military fuels are highly specialised products and are developed for very specific applications. Jet fuels are sometimes classified as kerosene or naphtha type. Kerosene type fuels include Jet A, Jet A1, JP 5 and JP 8. Naphthatype jet fuels, sometimes referred to as wide cut Jet Fuel, including Jet B and JP 4.
Corn germ oil, walnut oil, pumpkin seed oil, home recipe sunflower oil, raw pressed sunflower oil, sesame oil, flaxseed oil, mustard oil, peanut oil, soybean oil, milk thistle oil, rosehip oil, wheat germ oil, sea buckthorn oil, cedar nut oil, garlic sunflower oil, amaranth oil, macadamia nut oil, black cumin oil.
Mazut-100 is a fuel oil that is manufactured to GOST specifications, for example GOST 10585-75/99. GOST is the Russian system of standards. Mazut is almost exclusively manufactured in the Russian Federation, This product is typically used for larger boilers in producing steam since the BTU content is high. The most important consideration when grading this fuel is the sulfur content, which can mostly be affected by the source feedstock. For shipment purposes, this product has a high viscosity which drastically affect whether it is able to be pumped, shipping has unique requirements. Mazut is much like Number 6 Oil, and is part of the products left over after gasoline and lighter components are evaporated from the crude oil. The main difference between the different types of Mazut-100 is the content of sulphur. The grades are represented by these sulfuric levels: - "Very Low Sulphur" is mazut with a sulphur content of 0.5% - "Low Sulphur" is a mazut with a sulphur content of 0.5-1.0% - "Normal Sulphur" is a mazut with a sulphur content of 1.0-2.0% - "High Sulphur" is a mazut with a sulphur content of 2.0-3.5% - Very Low Sulfur mazut is generally made from the lowest sulfur crude feedstocks.
Automobile diesel fuel (EN 590) Grade E (winter), recommended for use at ambient temperatures up to minus 15 C (limiting filterability temperature). Diesel fuel EN 590 (EN 590) Grade E is obtained from petroleum refined products and is intended for use as automotive fuel for diesel engines of cars and trucks. Diesel fuel meets the requirements of the international standard EN 590/2000 and is characterized by a low content of sulfur, aromatic hydrocarbons and a high cetane number, which leads to an overall reduction in sulfur oxide emissions, a decrease in the amount of particulate matter in exhaust gases and the formation of deposits in the fuel system of cars and heavy vehicles, reducing exhaust smoke and is the key to good starting properties of the fuel during cold start of the engine. The oil refining industry produces diesel fuel in accordance with GOST 305-82 of three grades: L - summer, used at ambient temperatures above 0 C; 3 - winter, used at temperatures up to -20 C (in this case, winter diesel fuel should have a stagnation
PETROALLIANCE diesel fuel is the second distillate of crude oil. Ultra-low sulfur grades of D2, such as GOST 305-82, with a reduce sulfur content to a maximum of 0.02 percent and reduce sulfur pollution emissions. Diesel fuel is often used in diesel engines. Diesel engines or compression ignition engines, rely on the temperature increase of compression, rather than on spark plugs, to achieve reliable ignition timing and combustion efficiency. As a result of their inherently higher compression ratio for a given power output, diesel engines are more fuel efficient than spark ignition engines. Compared with spark ignition automotive engines, diesel engines weigh more, generate more vibration and produce greater particulate or soot emissions. Diesel engines can also produce a particularly carcinogenic type of hydrocarbon pollutant known as polycyclic aromatic hydrocarbons (PAHs), which are generated during the diesel combustion process. The cetane index is a measure of the autoignition quality of a diesel fuel, with higher numbers meaning that the engine is easier to start in cold weather. Our products are exported to Asia, Europe, America, and the CIS.
PETROALLIANCE diesel fuel is the second distillate of crude oil. Ultra-low sulfur grades of D2, such as GOST 305-82, with a reduce sulfur content to a maximum of 0.02 percent and reduce sulfur pollution emissions. Diesel fuel is often used in diesel engines. Diesel engines or compression ignition engines, rely on the temperature increase of compression, rather than on spark plugs, to achieve reliable ignition timing and combustion efficiency. As a result of their inherently higher compression ratio for a given power output, diesel engines are more fuel efficient than spark ignition engines. Compared with spark ignition automotive engines, diesel engines weigh more, generate more vibration and produce greater particulate or soot emissions. Diesel engines can also produce a particularly carcinogenic type of hydrocarbon pollutant known as polycyclic aromatic hydrocarbons (PAHs), which are generated during the diesel combustion process. The cetane index is a measure of the autoignition quality of a diesel fuel, with higher numbers meaning that the engine is easier to start in cold weather. Our products are exported to Asia, Europe, America, and the CIS.
urea N46% fertilizer: I.What is Urea? Urea is one kind of neutral fertilizer, which can be used in long time without any harmful material in soil. Usually it can be used both for base and top dressing fertilizer in agriculture. urea : Can be used in agriculture and producing BB fertilizer. II: Specification : Nitrogen 46.0%Min Biuret 1.0%Max Moisture 0.5%Max Particle Size 0.85-2.80mm 90%Min Physical properties White, hygroscopic crystal prilled. Free flowing and free from harmful substances. Soluble in water and in liquid ammonia. Packing 50kg /Woven bag Nitrogen 46%min Moisture 1%max Biuret 1%max Prilled 0.85-2mm Granular 2-4mm 90-94%min color Pure White Radiation Non-Radiactive Free Ammonia 160pxt ppm max
( Feet, Paws, Mid Joint Wings ) We offer you premium services, factory produce, specified quality, clean packaging, caution loading into shipping containers with high effectivity and efficiency on delivery time. Products Chicken Feet, Paws, MJW Country of Origin : Brazil Quality : Free Range, Grade A Slaughter Method : Halal Shelf Life : 24 months from production date Incoterm FOB, CIF any Port without problems Authorization for Export China Mainland, Hong Kong, Haiphong, Vietnam, Thailand Shipping to over 200 countries Inspection Certification SGS or any International Surveyor
We would like to offer you high quality sunflower oil refined / non-refined / winterized / non-winterized according to dstu 4492: 2005. Sunflower oil is commonly used for human consumption. Unrefined sunflower oil is a traditional salad dressing in eastern european cuisines. Product packaged into bottles and upon request in flexi tanks. Country of origin: Ukraine. We are open and flexible to negotiate details of deliveries (delivery terms, payment, packing). moisture and volatile matter0,1% max - moisture and impurities max 0,1% - acid value max 2 mg KOH/g - insoluble (non-fatty) impurities max 0,1% - specific weight at 20°C max 0,923 g/cm³ - saponification value - max 194 mg KOH/g - unsaponifiable matter max 1,5% - Color (measured in 5¼" Lovibond scale) yellow 10, red 1 (max) - cold test at 0°C for 5.5 hours - pass - FFA max 0,1% - soap content - negative - peroxide valuemax 5 m Mol/kg Looking forward to start cooperation with you with mutual benefits.
1st-grade unrefined