The Agro Brothers company has been working in the grain market for a long time already. Our team includes professionals with years of experience in this market, and thanks to this and to direct contracts directly with farms, our company offers high quality grains grown on the best Ukrainian farms. Due to the fact that we are the first and the only mediator between the farm and the final buyer, we can offer competitive prices on the market without losing as a product. Our main products: fodder corn, wheat, soy, buckwheat. Working conditions: CIF, FOB and CFR. We'll be happy to see you among our partners, please send us request and you,ll be surprised with our price and service.
VLF-60 Cable Insulation Tester by KEP is a very low frequency high potential tester that ensures efficient testing and fault location on medium voltage cables. Testing principle Very low frequency (VLF) testing involves applying frequency in the range of 0.01 to 0.1 Hz to the cable under test, which is non-destructive to insulation of proper quality, but is enough to detect cable faults. Compared to DC cable testing, which can be damaging to good insulation, VLF testing does not have such a detrimental effect on the cable being tested and does not generate any travelling waves. Main features Efficient non-destructive cable withstand testing Portable, perfect for field testing Fully automatic testing cycle Automatic discharging Easy maintenance due to solid-type insulation system Breakdown voltage measurement and load recognition Easy-to-use software Does not need an external PC LCD touch screen
Oil testers bring out accurate and repeatable results of measured breakdown voltage. Fast high-voltage switch off time makes it possible to carry out test of dielectric liquids, which are easily destroyed under such influences. The internal design of olt testers combined with a use of automatic high voltage breakers, cutting off supplied voltage if tester?s lid has been opened during the test, provide operator with high level of safety. Testers are fully equipped and are ready for operation right after unpacking. They come with a test vessel (iec 60156 ? basic configuration) with vde 0370 mushroom-shape electrodes. A gap between electrodes is easily regulated with a use of pass-no pass gauge, which comes in pack. A-series provides with fully automatic test procedure according to selected standard (basically iec 60156 and gost 6581 settings are preloaded). It has a built-in printer which is able to print a test report after procedure is done. Test results are saved into non-volatile memory of olt oil tester. A pc-connectivity makes it easy to collect data from olt oil tester, save and store them as well as print a fulfilled report. Test voltage is being measured directly on electrodes. This fact combined with a true sine voltage shape (independent from supply voltage shape), increases repeatability and accuracy of measurements. Test vessel for this series goes with magnetic stirrer, which stirs a liquid between two measurements. Main features: Compact and lightweight Fully automatic operation Fully compatible with iec 60156 Preloaded testing programs for different standards Built-in printer Pc connectivity Internal test data storage Precise direct voltage measurement True sine high-voltage on electrodes Oil temperature measurement
LFG-50 & PT-14 Сable tracing and fault location set, can be used for locating as well as tracing underground metal communications, such as any cables with metal cores as well as metal pipes. In addition, it provides operator with a quick detection of short circuits on cables as well as with an identification of a cable in a bunch. LFG-50 is a 50 W low frequency generator with ability to inject a signal of three frequencies via direct connection to an object or via internal transmission loop antenna, which is built-in a cover lid. Basic frequencies are 491; 982 and 8440 Hz. There are options of using a single-frequency or multi-frequency signals at the output. The power of the low frequency generator LFG-50 output signal can be adjusted up to 50 W with 2.5 W steps. This signal can be transmitted constantly or broken into separate blocks of 50 % duty cycle with 1 s repetition rate. A load matching is made automatically. Main parameters, such as output power, load impedance, selected frequency are shown on OLED display. If a load is higher than 1000 Ω LFG50 automatically switches into output voltage setting mode. The output overload protection will trip, when operating on short-circuit loops (lower than 0.5 Ω). MAIN FEATURES: Portable and lightweight Moistureproof and dustproof case Advanced LiFePO4 internal battery with fast charging option High-contrast graphic OLED display Multifrequency operation Operating frequencies can be changed upon request Internal transmission loop antenna Automatic load impedance matching Ability to work with energized 0.4kV cables (inductive connection) Overload protection Сable locator PT-14 designed for fast and accurate searching for power cables and other communications, identification of coating defects and the depth, followed by mapping.
Iodized food common salt is produced in accordance with dstu 3583-97(gost 13830-97), gost ð 51574-2000 and it is used as prevention of iodine deficiency disorders. The finished product is food common salt with an additive of kjo (gost 4202-75 or other normative documentation) or «pure» qualification or higher. Full name is potassium iodide (kjo). The quality of iodized salt is regulated by dstu 3583-97(gost 13830-97), and gost ð 51574 2000, in accordance with it the content of iodine should be equal to 40±1510 4 %, or 67, 0±25, 0 g/t expressed as potassium iodate. The content of moisture in the product should not exceed 1.00%. Iodine is one of the most important trace elements required by the human being. It is one of the hormones of the thyroid gland regulating metabolism, physical and psychological development of a personality. According to the information of the ministry of health the incidence of iodine deficiency disorders among the population has been growing of late years due to lack of iodine in the organism of a human being. The geochemical composition of our soils is poor in iodine and due to low content of this element in water and food products its inflow with the average food ration is insufficient. Iodine deficiency may result in severe abnormalities in the human organism. It is a cause of endemic or exophthalmic goiter swelling of the thyroid gland possibly leading to cancer. The most effective way to overcome the insufficient inflow of iodine in the food ration is regular use of iodized salt in cooking and salting. The intake of 5-6 g of iodized salt entirely covers daily need of the organism in iodine, preventing the genesis of the above diseases.
Oil testers bring out accurate and repeatable results of measured breakdown voltage. Fast high-voltage switch off time makes it possible to carry out test of dielectric liquids, which are easily destroyed under such influences. The internal design of olt testers combined with a use of automatic high voltage breakers, cutting off supplied voltage if testerâ??s lid has been opened during the test, provide operator with high level of safety. Testers are fully equipped and are ready for operation right after unpacking. They come with a test vessel (iec 60156 â?? basic configuration) with vde 0370 mushroom-shape electrodes. A gap between electrodes is easily regulated with a use of pass-no pass gauge, which comes in pack. A-series provides with fully automatic test procedure according to selected standard (basically iec 60156 and gost 6581 settings are preloaded). It has a built-in printer which is able to print a test report after procedure is done. Test results are saved into non-volatile memory of olt oil tester. A pc-connectivity makes it easy to collect data from olt oil tester, save and store them as well as print a fulfilled report. Test voltage is being measured directly on electrodes. This fact combined with a true sine voltage shape (independent from supply voltage shape), increases repeatability and accuracy of measurements. Test vessel for this series goes with magnetic stirrer, which stirs a liquid between two measurements. Main features: Compact and lightweight Fully automatic operation Fully compatible with iec 60156 Preloaded testing programs for different standards Built-in printer Pc connectivity Internal test data storage Precise direct voltage measurement True sine high-voltage on electrodes Oil temperature measurement
We welcome you to Our Companys corporate offer. We are EUROMAX LLC , Ukraine/Polish based reputable company with a large supply capacity of all types of A4 Copy Papers | Printer Papers | Copier Papers. We as the supplier of the below mentioned products confirmed and agree that our Enterprise is able, willing and ready to supply your company or buyer our A4 Copy Papers | Printer Papers | Copier Papers to any country of Europe/ America/ Africa / Asia/ & Worldwide, Commodities Trading Area Services offered below. A4 Copy Papers | Printer Papers | Copier Papers 70g 80g A4 copy paper Features and Benefits : 1 Excellent image clarity & contrast 2 High opacity and thickness 3 High performance for both side printing/copying 4 Optimized smoothness on both surface 5 Uniform toner/ink absorption to provide good print evenness 6 Paper dimensionally stable 7 Guaranteed for trouble-free operation Suitable for : 1 Photocopy 2 Laser Printing 3 Inkjet Printing 4 Plain fax Product Range : 1 Available substances are: 70gsm, , 80gsm 2 Packing: Cut size 3 Provide OEM service Package: 500sheets&pcs per ream, 5reams&10reams per carton Brightness: 98%, 100%, 102% Opacity: =90% Size: 210*297mm, 420*297mm Grade A If you are a Buyer or Buyers mandate, we invite you to contact us and experience our services. For more information please feel free to contact us if any of our above items needed and our sales team professionals will get back to you within 24 working hours in connection to your inquiries and will gladly offer product details for your review. PLEASE NO TIME WASTERS. WE DO BUSINESS ACCORDING TO OUR PROCEDURE ONLY WITH PROFESSIONAL ETHICS. Buyer must agree, accept and follow the Seller's procedures. Best Regards Sales Department
We welcome you to Our Companys corporate offer. We are EUROMAX LLC , Ukraine/Polish based reputable company with a large supply capacity of all types of A4 Copy Papers | Printer Papers | Copier Papers. We as the supplier of the below mentioned products confirmed and agree that our Enterprise is able, willing and ready to supply your company or buyer our A4 Copy Papers | Printer Papers | Copier Papers to any country of Europe/ America/ Africa / Asia/ & Worldwide, Commodities Trading Area Services offered below. A4 Copy Papers | Printer Papers | Copier Papers 70g 80g A4 copy paper Features and Benefits : 1 Excellent image clarity & contrast 2 High opacity and thickness 3 High performance for both side printing/copying 4 Optimized smoothness on both surface 5 Uniform toner/ink absorption to provide good print evenness 6 Paper dimensionally stable 7 Guaranteed for trouble-free operation Suitable for : 1 Photocopy 2 Laser Printing 3 Inkjet Printing 4 Plain fax Product Range : 1 Available substances are: 70gsm, , 80gsm 2 Packing: Cut size 3 Provide OEM service Package: 500sheets&pcs per ream, 5reams&10reams per carton Brightness: 98%, 100%, 102% Opacity: =90% Size: 210*297mm, 420*297mm Grade A If you are a Buyer or Buyers mandate, we invite you to contact us and experience our services. For more information please feel free to contact us if any of our above items needed and our sales team professionals will get back to you within 24 working hours in connection to your inquiries and will gladly offer product details for your review. PLEASE NO TIME WASTERS. WE DO BUSINESS ACCORDING TO OUR PROCEDURE ONLY WITH PROFESSIONAL ETHICS. Buyer must agree, accept and follow the Seller's procedures. Best Regards Sales Department
We welcome you to Our Companys corporate offer. We are EUROMAX LLC , Ukraine/Polish based reputable company with a large supply capacity of all types of A4 Copy Papers | Printer Papers | Copier Papers. We as the supplier of the below mentioned products confirmed and agree that our Enterprise is able, willing and ready to supply your company or buyer our A4 Copy Papers | Printer Papers | Copier Papers to any country of Europe/ America/ Africa / Asia/ & Worldwide, Commodities Trading Area Services offered below. A4 Copy Papers | Printer Papers | Copier Papers 70g 80g A4 copy paper Features and Benefits : 1 Excellent image clarity & contrast 2 High opacity and thickness 3 High performance for both side printing/copying 4 Optimized smoothness on both surface 5 Uniform toner/ink absorption to provide good print evenness 6 Paper dimensionally stable 7 Guaranteed for trouble-free operation Suitable for : 1 Photocopy 2 Laser Printing 3 Inkjet Printing 4 Plain fax Product Range : 1 Available substances are: 70gsm, , 80gsm 2 Packing: Cut size 3 Provide OEM service Package: 500sheets&pcs per ream, 5reams&10reams per carton Brightness: 98%, 100%, 102% Opacity: =90% Size: 210*297mm, 420*297mm Grade A If you are a Buyer or Buyers mandate, we invite you to contact us and experience our services. For more information please feel free to contact us if any of our above items needed and our sales team professionals will get back to you within 24 working hours in connection to your inquiries and will gladly offer product details for your review. PLEASE NO TIME WASTERS. WE DO BUSINESS ACCORDING TO OUR PROCEDURE ONLY WITH PROFESSIONAL ETHICS. Buyer must agree, accept and follow the Seller's procedures. Best Regards Sales Department
We welcome you to Our Companys corporate offer. We are EUROMAX LLC , Ukraine/Polish based reputable company with a large supply capacity of all types of A4 Copy Papers | Printer Papers | Copier Papers. We as the supplier of the below mentioned products confirmed and agree that our Enterprise is able, willing and ready to supply your company or buyer our A4 Copy Papers | Printer Papers | Copier Papers to any country of Europe/ America/ Africa / Asia/ & Worldwide, Commodities Trading Area Services offered below. A4 Copy Papers | Printer Papers | Copier Papers 70g 80g A4 copy paper Features and Benefits : 1 Excellent image clarity & contrast 2 High opacity and thickness 3 High performance for both side printing/copying 4 Optimized smoothness on both surface 5 Uniform toner/ink absorption to provide good print evenness 6 Paper dimensionally stable 7 Guaranteed for trouble-free operation Suitable for : 1 Photocopy 2 Laser Printing 3 Inkjet Printing 4 Plain fax Product Range : 1 Available substances are: 70gsm, , 80gsm 2 Packing: Cut size 3 Provide OEM service Package: 500sheets&pcs per ream, 5reams&10reams per carton Brightness: 98%, 100%, 102% Opacity: =90% Size: 210*297mm, 420*297mm Grade A If you are a Buyer or Buyers mandate, we invite you to contact us and experience our services. For more information please feel free to contact us if any of our above items needed and our sales team professionals will get back to you within 24 working hours in connection to your inquiries and will gladly offer product details for your review. PLEASE NO TIME WASTERS. WE DO BUSINESS ACCORDING TO OUR PROCEDURE ONLY WITH PROFESSIONAL ETHICS. Buyer must agree, accept and follow the Seller's procedures. Best Regards Sales Department
With considerable reserves of raw materials and new equipment we are able to dispose dry lignin 15-18% moisture about 30 000 tonnes per year. Product delivery: plastic bags (2,5 kg), bags (35 kg), big bags (1000 kg). Product characteristics: Composition: lignin 15-18% moisture. Fractional composition: 90% of 0-3,5 mm. Toxicity: non-toxic. Adsorption capacity: 0.04 g. Lignin sorbent is a monosize powder made of natural material with a density of 0.55-0.65, non- toxic, floating, does not absorb the water, react with the contaminant for 1-2 minutes, hold in the oil- saturated state for a long time, can be easily applied on the water surface and soil, manually or spraying. Using our product as an oil sorbent you completely solve the problem with its recycling, since it effectively absorbs oil and oil products, can be easily assembled with contaminated surfaces and can be recycled as a high-calorie solid fuel. With considerable reserves of raw materials and new equipment we are able to dispose sorbent about 30 000 tonnes per year. Product delivery: big bags (1000 kg) or bags (35 kg). Product characteristics: Composition: lignin with 16% moisture. Density: 0.55- 0.65. Toxicity: non-toxic. Absorbance: 1:8 Reaction time: 1-2 min. Behaviour in water: floating, not absorb water. Spray method: manual or mechanical. Shelf life: unlimited, in big bags under roof. Recycling: burning high-calorie fuel. The pellets can be used in all standard domestic, industrial and semi- industrial solid fuel-fired boilers without reconstruction of boilers, fireplaces, household ovens, grills and barbecue. Product characteristics: Sulfur content 0.4%. Calorific power 4950 kcal/t, Pellet size 30 mm in diameter. Moisture 18%, Ash content 10-12%, The duration of burning of pellets from lignin hydrolised is the same as that of coal DG (long flame coal). They are well-ignite, burn evenly,, not give sparks and soot. Pellets from lignin hydrolised in bags and big bags can be stored outside. The ash after combustion of the pellets can be used as a fertilizer, it is not baked and does not require disposal costs. With considerable reserves of raw materials and new equipment we are able to dispose pellets from lignin hydrolised about 15 000 tonnes per year. Product delivery: big bags (1000 kg) or bags (35 kg). Parameters CO2 emission during combustion of the pellets from lignin hydrolised: In comparison with gas pellets from lignin hydrolised releases 10 times less CO2 In comparison with coke pellets from lignin hydrolised releases 30 times less CO2 In comparison with coal pellets from lignin hydrolised releases 50 times less CO2
Physical And Mechanical Data Commercial name - Gray Ukraine Breed - Granite Pokostovsky deposit Volumetric weight 2740 kg / m3 Water absorption 0.24% Compressive Strength 220 MPa Abrasion 0.64 g / cm2 Natural Radiation Class 1 Class Distinctive features of Pokostovsky granite The Pokostovsky granite deposit is a natural source of high-quality material for the production of columns, obelisks, pedestals, etc. The extracted stone is a monolithic granite block of high strength. In addition to hardness, Pokostovka granite has a number of advantages: Wear resistant in relation to mechanical and chemical effects; Easy to handle; It has a stable color. Has a fine and medium-grained structure. In addition to its excellent natural physical properties, the fossil of the Pokostovsky granite quarry has an elegant gray color. This makes it attractive in appearance. All these factors indicate that when purchasing products from Pokostovsky granite from us , you can be sure of their practicality, beauty and durability. Our company offers to order or buy finished products from Pokostovsky granite stone: Modular / facing tile; Side stone; Memorial complexes; Monuments Paving stones.
PHYSICAL AND MECHANICAL DATA â?¢ Commercial name Flower of Ukraine â?¢ Granite breed â?¢ Mezhirichskoye deposit â?¢ Volumetric weight 2600 kg / m3 â?¢ Water absorption 0.50% â?¢ Compressive Strength 150 MPa â?¢ Abrasion 0.47 g / cm2 â?¢ Natural Radiation Class 1 Class We bring to your attention the granite of the Mezhirichsky deposit, which is considered one of the best mined in Ukraine. Due to this, it is called Flower of Ukraine (Flower of Ukraine). The material has a basic light brown color (it is determined due to the fact that the main component of this stone is feldspar), to which various shades can be mixed. The structure is fine-grained. Given the appearance and physical properties of this stone, it is recognized as one of the best decorative materials. Simplicity of processing also plays an important role, which makes it possible to obtain an attractive mirror surface that looks very attractive. Also, this stone lends itself well to heat treatment, which opens up wide opportunities for its use.
ENABLED PACKING Tin bucket 20L Barrel 200L The newest all-season semi-synthetic motor oil for long-distance and urban trucks, agricultural and construction machinery, buses and other commercial vehicles. Produced of high-quality base oils with high-efficient modern additives package. Provides high antifriction, anticorrosion, detergent and antioxidizing oil properties throughout the service life. Intended for year-round use incl. modern high-speed air and turbo diesel engines. BENEFITS Easy cold start in winter Consistently high performance in various operating modes throughout the service life; Prevents high and low temperature deposits formation in the engine; Improved anti-foam properties, that significantly reduces foaming in the hydraulic drive system of the valves Compatible with all engine sealings High-class performance properties allow to apply Yuko Mega Diesel 10W-40 in the engines of most modern commercial vehicles. Compliance SAE 10W-40 API CI-4/SL MB 228.3 Volvo VDS-3 CAT-ECF-1 CES 20078 Tpical characteristics Kinematic viscosity at 100, mm²/s14.8 Density at 20, kg/m875 Viscosity index150 Alkalinity, mg KOH/g8.3 Flash point in open crucible, 210 Pour point, -32
Good day , I am glad present to you GoldenSun™ . We offer sunflower oil from Ukraine . Our sunflower oil is cold pressed. .This method which entails minimal processing, produces a light, flavorful oil suitable for all cooking needs. Sunflower oil manufacture involves cleaning the seeds, grinding them, pressing and extracting crude oil from them for further refining. Our sunflower oil matches standards in all aspects such as color, taste and viscosity. It is free of impurities and meet the demands placed upon it for use in cooking. We offer private labels for our clients and different design of bottles. Each of our client supermarket chains, distributors, importers receive individual product according to the required brand and design. Our client oriented approach will help to make your brand successful. Attractive labels, unique - Ergonomic shape of the bottle, designed for a good identification of the product and attract the attention of consumers. Terms of delivery EXW, FCA, FOB, DAP, CIF. Shipping container standards, truck standards, railroad boxcars. The number of pieces in a box : 1 liter (920gr) - 15 pcs in box 1,8 liter (1650gr) - 6 pcs in box 3 liter (2760gr) - 6 pcs in box 5 liter (4600gr) - 3 pcs in box
Yellow and White Corn for human and poultry feeding, GMO & NON GMO, #1/2/3. We offer superior quality Corn (Maize, Maka), which is further sub-categorized into yellow maize and white maize. This yellow maize is very rich in nutritious content and can be used in cooking and is also eaten as raw. Our genuine quality maize is easily available in the market and that too at the most reasonable price. Thus, we are reckoned as one of the eminent Ukrainian maize exporters and suppliers of Europe SPECIFICATIONS: Yellow corn from Ukraine Moisture max 14% Broken grains max 5% Damaged grains max 5% Foreign matters max 2% Moisture : 14.0% max. Total Damaged Kernels : 3.0% max. Protein : 9.0% min. Admixture : 2.5% max. Aflatoxin Total : 20.0% max. Hectoliters : 72 Kc max. Humidity : 14.5% max. Weight of Bushel/lbs : 54 min. Radiation : None Other Grains : 1.5% max. Other Natural Color : 5.0% max. Type Varity : 5.0% max. Technical specification for dried maize grains . 1) Maize should be of latest crop and free from live and dead insects. 2) Humidity should be12% maximum . 3) Broken grains and strange materials should be 3% maximum . 4) Damaged grains should be 3% maximum . 5) Damaged grains caused by heat should be 0.2% maximum . 6) Maize should not have a Mycotoxins (Aflatoxins) B1 of rate more than 10 p.p.b 7) Maize used for animal and birds feeding should be free from oddity odors and molds and free from chemicals toxins and pesticides. 8) The cleaning level minimum 94%(Intact grains) 9) Maize should not be genetically modified . 10) Maize should be free from any radiation. 11) Percentage crude protein should not be less than 10% . 12) Expiry date should be one year from delivery date and mention the production date on the goods . 13) Maize should be free from any soils and any kinds of seeds except maize. 14) State Company of Animals Resource is responsible of specifications checking and fixing.
Polyethylene pressure pipes PE-100 for sewerage systems. Polyethylene pressure pipes for sewerage are used for construction and repair of outdoor pipelines, transporting water of household and drinking supply.Leading raw suppliers are European manufacturers SABIK, TOTAL. Pipes are made of polyethylene PE 100 class and correspond to standard dimension ratio SDR 41 - SDR 6, with nominal diameters from25to500 mm, including main working pressures 4; 6; 8; 10; 12,5; 16; 20 bar. Pipes, produced in linear segments, have the length 12 m (or another by agreement with the customer). Pipes with diameter not more than 160 mm can be produced in hanks (cylinders) from 50 to 1000 m. Pipes with diameter up to 110 can be connected by means of mechanic (compression) fittings. Polyethylene pipes of major diameters are connected mainly by means of jam-weld or by means of thermistor fittings that requires special welding equipement. Such connection is monolithic and considered to be the most reliable. -------- Polypropylene casing pipes with connecting threads for the construction of water supply wells and also production wells. The sinking of wells using casing pipes allows to avoid groundwater pollution, and also increase the speed of sinking thanks to reduced diameter in comparison with usual steel pipes. Blue casing pipesfor wells have the following diameters: Pipes are made of copolymere propylenes, which have better mechanical and ecological chracteristics than PVC pipes for wells. ------- Two-layered fluted polymeric pipes for outdoor sewerage (POLYCORR). Polymeric pipes corresponds to the requirements of European standard project EN1401-1; 1999,material for pipes production-block-copolymer polypropylene PP of leading European manufacturers BASELL,?V?.Nominal bore D 200, 300, 400, 500, 600, 800,? type of tube, circular rigidity SN4, SN8,SN16. Pipes produced by means of continuos extrusion method, have double closed structure of wall. The smooth inner surface and the corrugated outer wall. Pipes are connected by means of flayers, produced on the pipes during production process. The color of standard pipes and molded pieces for sewerage -ginger, the color of inner walls of pipes - white. PP pipes are designed for nonramming underground systems of public sanitary and storm water drainage.
Refined deodorized sunflower oil Ukraine export (FCA/DAF/FOB/CFR/CIF). Product: Refined deodorized sunflower oil (Refined deodorized sunflower oil). Country of Origin: Ukraine. Quality: DSTU 4492:2005 "Sunflower oil. Technical conditions". Samples: It is possible to send product samples by courier at the expense of the purchaser. Packaging: - Poured in flexi-tank (20-foot container of 22 tons); - PET bottle 1.0, 1.8, 2.0, 3.0 or 5.0 liters. Production of sunflower oil under the client's TM (Privat Label) is possible. Form of payment: - 30% prepayment, the remaining 70% on the provision of shipping documents; - Irrevocable confirmed by bank letter of credit with revolving revocability on submission of shipping documents. Currency of payment: US Dollar (USD) or Euro (EUR). Minimum lot for shipment: 20 tons (for road shipments), one 40 ft container (load 23.5 tons) or one rail car (load 68 tons). Terms of delivery according to Incoterms 2010: - FCA warehouse in Ukraine; - DAF border of Ukraine (by train in boxcars net 68 tons); - FOB Port of Odessa, Ukraine (in 40 ft containers, net 23.5 tons); - CFR/CIF any city of destination (by road transport); - CFR/CIF any seaport of destination (in 40 ft. containers net 23.5 tons). We make all-year-round shipment of refined deodorized sunflower oil for export to any country in the world. Quotation for the price of refined sunflower oil deodorized is issued only after the buyer's request, which contains: product name, quality requirements (or compliance with a particular DSTU, GOST, other standards), type of packaging (material, weight, the need for a logo + buyer information), quantity (tons), currency of payment, delivery terms according to Incoterms 2010, form of payment, regularity of order (single or monthly). It is also desirable to specify the target (guide) price for the refined deodorized sunflower oil.
EGG SPECIFICATION : Eggs cater by us are sourced from the healthiest hens and treated with the greatest CARE. Our eggs represent the ultimate in quality, freshness and nutrition. Eggs are available in various sizes, including 40 - 45 grams 45 50 grams 50 55 grams MOQ 1x40fcl. The eggs are preserved in the cleanest of environments and are packed in the safest materials. We offer a good quality range of Farm Fresh Eggs. Eggs are rich in nutrients and are a very affordable component of a healthy diet. These CONTAIN high-quality protein and all nine essential amino acids. They are a good source of choline, which helps regulate the brain, nervous system and cardiovascular system. We process the eggs in a natural and most hygienic environment to prevent the outbreak of disease caused to BIRDS. With our vast experience in the industry, we follow the best practices and methodologies to deliver large amount of best quality egg WHITE Shell Eggs We offer a wide range of White Table Egg. These eggs are rich in nutrient and form excellent diet. Packaging. Our organization supplies and exports these eggs to far corners of the world. Since the eggs are very fragile in nature, we take extra care to package these eggs in specialized packaging and with careful handling procedures. The packaging details that we follow are listed below: 30 Eggs laid in a tray 12 SUCH trays in a ply carton 360 eggs in a carton 1312 carton in 40 ft reefer CONTAINER 4,72,320 Eggs per 40 ft reefer CONTAINER
Origin: Ukraine Type: 1. Food common Salt 2. Salt for industrial application Packaging: 1kg, 10kg, 25kg, 50kg, 1MT big-bags Package material: paper, PE begs. Minimum order: 1 fcl Quantity: 1000MT monthly Specification. Food common salt: Sodium chloride, %, min 98,20% Calcium ion, %, max 0,35 Magnesium ion, %, max 0,08% Sulphate ion, %, max 0,85 Potassium ion (for product without iodine agent), %, max 0,10 Ferric oxide (III), %, max 0,040 Water-insoluble substance, %, max 0,25 Moisture, %, max 0,25 Milling 0: 0,8 mm, max 20,0% Milling 1: 1,2 mm, max 10,0% Milling 2 2,5 mm, max 15,0% Milling 3 < 2,5 mm, max 10,0% 2,5-4,0 mm, min 65,0% > 4,0 mm, max 25,0% Salt for industrial use: Grades: Extra / First Actual sodium chloride, %, min 97,5 90,0 97,5 â?? 98,2 calcium ion, %, max 0,55 0,8 0,35 â?? 0,49 magnesium ion, %, max 0,15 0,20 0,02 â?? 0,05 sulphate ion, %, max 1,2 2,0 0,8 â?? 1,2 potassium ion, %, max 0,2 0,20 0,009 â?? 0,011 ferric oxide (III), %, max 0,040 0,100 0,0017 - 0,0021 water-insolubles, %, max 0,4 0,6 0,2 â?? 0,4 moisture, %, max 0,25 0,40 0,1 â?? 0,2 Milling 1 < 1,2 mm inclusive, min 85,0% > 2,5 mm, max 3,0% Milling 2 < 2,5 mm inclusive, min 80,0% > 4,0 mm, max 10,0% Milling 3 < 4,0 mm inclusive, min 85,0$ > 4,0 mm, max 15,0$ Other millings from 5 mm to 150 mm are also available.