ET-ROLL-310 is a full automatic mattress rollpack machine with the self-wrapping system. The mattress is wrapped fully automatic without any need for manual hand bagging. Any type of mattresses are fed by the conveyor and wrapped, compressed, sealed and rolled. Robust structure is able to apply 50 tons of hydraulic pressure on the mattress in order to make the mattress completely flat and easy to rollpack. - Thanks to adjustable pressing amount and 90° cross conveyor before the rolling system, ET-ROLL-310 can also be used as a normal mattress wrapper without rolling. - Durable resistances with cooling system for uniform heat distribution - No wiring problems and energy saving thanks to cold sealing system - Reliable Omron control system with the highest efficiency - No hand bagging thanks to auto wrapping system - Self-adjustment for different sizes of mattresses - 50 Tons hydraulic pressure mechanism - Robust structure - Ability to use as mattress wrapping only without fully compression and rolling - Ability to adjust heating-cooling time for different film thickness - Automatic side film cutting system - Hydraulic rollpack exit system with adjustable roll diamater - No damage on the mattress thanks to rollpack exit system from the back - Multidirectional cross conveyor sends the mattress to the rolling unit or send it to other direction for only-wrapped mattresses - Ability to work with pocket spring, foam and latex mattresses (bonnell is not suggested for the quality of the rolled mattress, although the machine is able to roll) - ElektroteksCare: online after-sales service
SLICE-R is a roll slitter which is used for cutting the roll of textile to the desired with of roll. With its tempered blade it is able to cut even the hardest materials such as elastic non woven, knitted fabric, 3D spacer, leather, etc. Unlike the machines in the market, SLICE-R has advance mechanisms in order to obtain precise slitting of the rolls without wasting your materials by unsuccessful cutting attempts. The strong tempered blade not only offers precise cutting, but also much longer durability. Automatic double side sharpening system, blade cooling and roller stabilizer presser support excellent cutting quality while ergonomic blade safety cover, motorized right-left motion of the blade and unlimited maximum cut width provides the highest efficiency and ergonomics. Smooth nonwoven, knitted fabric, jacquard fabric, leather, 3d cutting thanks to robust structure and the blade Roller stabilizing presser for accurate cutting Heavy duty tempered blade for cutting various materials Motorized right left motion of the blade mechanism Easy Pneumatic Guide Lock System Motorized right-left positioning of the blade Inverter driven positioning of the blade Ergonomic blade safety cover mechanism Double Side Automatic Blade Sharpening Mechanism Quick cutting of the rolls thanks to adapted sizing ruler. Blade air cooling system Heavy duty blade Max. Fabric diameter: 30 cm Max. Fabric width: 250 cm (optional 320 cm if requested) Fabric cutting width: 4-245 cm (depending on the compressibility and tightness of the material) Blade diameter: 52 cm Heavy duty tempered blade for cutting various materials without problem Motorized right and left motion of the blade Ergonomic roll guide locking system with pneumatic cylinder 3-points blade cooling system Inverter controlled blade rotation and blade right-left motion Auto sharpening pneumatic motors for right and left side of the blade Additional roll presser rollers for steady cutting operation Automatic opening blade safety cover Robust structure Weight: 550 kg
Best solution for creating pillow top mattresses with a single piece of border. Eliminates one tape edge operation for pillow tops. Thanks to advanced and flexible folder system, LEON-FT100 also offers easy production of euro-top and boxtop mattresses. Specifications Adjustable folder for easy border height change With or without binding working modes Automatic thread break and material run-out sensors High speed durable chainstitch sewing head Heavy duty sewing head for heavy borders Bind seam self-tape look Servo motor driven synchronized heavy duty puller Servo motor driven sewing head Auto border rolling system at the end Perfect solution for making euro top and boxtop mattresses Ability to make double binding on the border Flexible solution for all your border binding works
The leon-pt mattress border side stitching machine is designed to make luxurious hand-stitched borders. Unlike the machines in the market, leon-pt offers not only hand-stitched border but also circle, rectangle, plus shape, s shape, and various different figures to be stitched. The leon-pt4 can make one mattress border less than 3 minutes according to number of tacks and mattress size. It offers unlimited positioning of tacks as 2-3-4-5-6 tack on each row. It offers ability to create different tack designs using the touch screen panel. No quilt repair machine: ability to continue sewing from the stop or desired point Servo motor driven motion control system Reliable jukä° lk 1900 tacking heads Automatic bobbin finish detector Smooth movement of the border for accurate and straight tacks.
TIGON Single Needle Continuous Mattress Quilting Machine TIGON is a full automatic feeding system high speed single needle quilting machine for high end luxury mattress, home textile and upholstery works. TIGON performs the whole operations of feeding with motorized rollers, quilting and cutting the quilt in length. With the ability of quilting very different products, TIGON offers perfect quilting quality for all the products from very thin garment products to thick materials for mattress industry with multiple layers including foam, visco, memory foam, latex, polyester fiber, non woven, jacquard fabric, knitted fabric, leather and down fill. Your mattresses, headboards, comforters will overtop among others with the aspects of stitch quality, pattern designs, sustaining quality as well as your efficiency. Full automatic feeding, tensioning, quilting and cutting Minimum bobbin change with XXL spools (Durkopp Adler) Automatic thread cutting in less than 0,5 second Standard length & sides cutters High human security systems Brushless servo motors Automatic fabric measure control system with great accuracy Remote & Smartphone production monitoring system Electronic position controlled fabric width adjustment Easy pattern adaptation Flexible and user friendly software : EtQuilt. High quality sewing head: Durkopp Adler Max. Sewing speed: 3400 RPM // 21 m/min (according to the material filling) Max. Jumping Speed: 60 m/min Max. Stitch area: 2.20 x 2.60 Max. Fabric width: 2.45 m Suggested needle size: 120-160 (material dependent) Number of feeding rolls: 5 (options are available upon request) Stitch length: 1-10 mm (may change according to the material filling) Automatic upper and lower thread cutting system Max. Thickness: 9-10cm (material compressibility dependent) Stitch type: Lock-stitch Automatic integrated panel cutter in length Advanced Side Cutters Automatic lubrication for the sewing head as hook and needle part Statistical production graphics Immediate error solving with visual error display Online consultation with ElektroCARE system Reliable OMRON controllers Optical barriers for human safety Durable FESTO pneumatic system with low air consumption No need for repair machine thanks to ability to start from the desired point. No need to draw again for scaling, rotating and arraying Motorized width adjustment of the clamps for different fabric width Automatic measuring of the physical maximum area of sewing to double check with the active pattern design Pattern Design Preparing Software is Included.
ET-ROLL-210 is a cost-effective press and roll pack machine with 50 tons heavy duty hydraulic pressure mechanism. The mattress is given to the machine after hand bagging, the machine automatically fulfils all the operations of compression, sealing and rolling with a wide range of adjustable exit diameter. 50 Tons hydraulic pressure mechanism Robust structure for the durability Hydraulic exit system Adjustable diameter for the exit roll Ability to manually fold the mattress after the compression and send to roll pack Additional sealing for stronger rolls Additional plastic film reserves
KYK-S is the one of the highest speed tape edge machine in the market with heavy duty, smooth PFAFF 5625 sewing head which is simply the strongest in the world. The reduced training time and operator fatigue makes the tape edging operation much easier with the day long performance stability. The motorized belt and the synchronized mattress rotating arm makes the operator stands stationary and brings easy cornering. Even the heavy premium mattresses are flipped within seconds thanks to heavy duty flipping system. The adaptable continuous mattress flow system brings the mattress to the machine and takes it out to the next stations after tape edging is done. The continuous flow system lets the operator sew all the time and reduce a great deal of labor cost. - Easily produces 200-250 mattresses in 8 hours (190cm x 90cm) - Standard PFAFF 5625 chainstitch sewing head - Ergonomic design that allows high capacity even for heavy mattresses - Comfortable cornering thanks to slippery conveyor metarial - Full automatic proccess with a single foot pedal (All the speeds are auto - adjusted according to pressing amount) - Automatic head lowering at the corners - Minimum operator fatigue - Full automatic parametric corner turning system - Automatic foot lift - Interpolated driven 90° mattress turning arm - No deformation on the conveyors thanks to the arm load hanger system
LEON-3D is the multineedle 3D border machine. It is used to add decorative secondary materials such as ribbons, 3D spacer, zippers. With the functional folder, it offers various types of border combinations. The heavy duty servo motor driven puller system eliminates the slipping fully and provides excellent stitch quality not only for single piece pre-quilted borders, but also while joining multiple layers of fabric, foam, polyester fiber, ribbons, nonwoven, etc. Various optional folders for special borders Ability to make handle with optional folder Servo driven puller cylinders Ability to Sew Zippers, 3D Spacer and Ribbons Ability to feed pre-quilted border or separate layers of border
It is a type of boom that can provide work in deeper or longer distances such as rivers, ponds, canals. These booms are designed and manufactured in a maximum efficiency by Galen Group engineers in the direction of clients'demands and in consideration of the work areas and taking into account the excavation force of the construction machine and the machine's momentum.
Razor alternatives for spare parts
Razor alternatives for spare parts
Razor alternatives for spare parts
Razor alternatives for spare parts
Aluminum profile, aluminum extrusion.
Aluminium extrusions, strip, profiles.
Aluminum extrusion profilesaluminyum c60 profiles, aldox, standard profiles, handrails, insulated and non insulated profiles, glass window, tuba sliding series moving door frames, office division systems and facade systems, mechanical submerged.
a. Price of product - depends on customers product b. Product origin - Turkey c. Key Specifications/Special Features d. Minimum Order Size : 1 full Truck or 1 full container e. Packaging Details: Euro pallets- Wooden boxes or other customer-specific packaging details.
Reyhan carpets is a machine made carpet producer in gaziantep / turkey. We have quality ranges as follows ; • 100% polypropylene pile yarn • points between 160.000 upto 1 million • pile height between 9-13 mm • weight between 1, 50kg upto 4.00kg per sqm • chenille, pp-heatset, pp fraise, pp fraise with lurex (100% olefin) • wall to wall ( broadloom ), area rugs, mosque carpets • hand carving designs is available Hs code : 5702.4290 Please kindly advice if we can do any cooperationship over machine made carpet business ? Awaiting your kind reply soon. Best regards, Engin uslu ( mr. ) Mechanical engineer ( sales manager ) 4. Organize sanayi bolgesi 83414 nolu cd. No:5 baspinar - 27600 gaziantep / republic of turkey Tel. : +90.342.357.0680/81 Fax : +90.342.357.0682 Mobile : +90.535.956.9423 ( tango, viber & whatsapp ) Web : www.Reyhancarpet.Com Email : enginuslu@reyhancarpet.Com, Skype : enginuslu78 Qq : 1651631542 Showroom : https://www.Dropbox.Com/sh/owfv4z1slxrzzvo/aaa4xnzcqi4fqc_qvongyybna Facebook : https://www.Facebook.Com/engin.Uslu.161 Nylon schrinkage
Explorer60 is full hydraulic drill rig for coring and drilling for underground galleries and surface. It can be built in different frames such as regular skid frame, three wheel trailer and hydraulic crawlers narrow or wide. Explorer60 also can be built in different feed lengths for different purposes. It has hydraulic regulated spindle to control speed of rotation between 166 rpm to 1000 rpm step less. It can be designed either with electrical engine or diesel engine. The rotation head can be swung aside for hole cleaning or grouting equipment. Explorer60 has automatic hydraulic synchronization system between chuck and rod holder to handle the rods. For stabilization it has hydraulic jacks at the top of the feeding frame. Explorer60 has also optional accessories such as larger wire line hoist, cathead or two step hydraulic water pump.
Explorer30 is the small hydraulic drill rig for coring and drilling for narrow tunnels, underground galleries and surface. It has small built so that easy to install and carry. It has hydraulic regulated spindle to control speed of rotation between 350 rpm to 2200 rpm step less. It can be operated with one person. It can be designed either with electrical engine or diesel engine. The rotation head can be swung aside for hole cleaning or grouting equipment. Explorer30 has automatic hydraulic synchronization system between chuck and rod holder to handle the rods.
