ET-ROLL-310 is a full automatic mattress rollpack machine with the self-wrapping system. The mattress is wrapped fully automatic without any need for manual hand bagging. Any type of mattresses are fed by the conveyor and wrapped, compressed, sealed and rolled. Robust structure is able to apply 50 tons of hydraulic pressure on the mattress in order to make the mattress completely flat and easy to rollpack. - Thanks to adjustable pressing amount and 90° cross conveyor before the rolling system, ET-ROLL-310 can also be used as a normal mattress wrapper without rolling. - Durable resistances with cooling system for uniform heat distribution - No wiring problems and energy saving thanks to cold sealing system - Reliable Omron control system with the highest efficiency - No hand bagging thanks to auto wrapping system - Self-adjustment for different sizes of mattresses - 50 Tons hydraulic pressure mechanism - Robust structure - Ability to use as mattress wrapping only without fully compression and rolling - Ability to adjust heating-cooling time for different film thickness - Automatic side film cutting system - Hydraulic rollpack exit system with adjustable roll diamater - No damage on the mattress thanks to rollpack exit system from the back - Multidirectional cross conveyor sends the mattress to the rolling unit or send it to other direction for only-wrapped mattresses - Ability to work with pocket spring, foam and latex mattresses (bonnell is not suggested for the quality of the rolled mattress, although the machine is able to roll) - ElektroteksCare: online after-sales service
SLICE-R is a roll slitter which is used for cutting the roll of textile to the desired with of roll. With its tempered blade it is able to cut even the hardest materials such as elastic non woven, knitted fabric, 3D spacer, leather, etc. Unlike the machines in the market, SLICE-R has advance mechanisms in order to obtain precise slitting of the rolls without wasting your materials by unsuccessful cutting attempts. The strong tempered blade not only offers precise cutting, but also much longer durability. Automatic double side sharpening system, blade cooling and roller stabilizer presser support excellent cutting quality while ergonomic blade safety cover, motorized right-left motion of the blade and unlimited maximum cut width provides the highest efficiency and ergonomics. Smooth nonwoven, knitted fabric, jacquard fabric, leather, 3d cutting thanks to robust structure and the blade Roller stabilizing presser for accurate cutting Heavy duty tempered blade for cutting various materials Motorized right left motion of the blade mechanism Easy Pneumatic Guide Lock System Motorized right-left positioning of the blade Inverter driven positioning of the blade Ergonomic blade safety cover mechanism Double Side Automatic Blade Sharpening Mechanism Quick cutting of the rolls thanks to adapted sizing ruler. Blade air cooling system Heavy duty blade Max. Fabric diameter: 30 cm Max. Fabric width: 250 cm (optional 320 cm if requested) Fabric cutting width: 4-245 cm (depending on the compressibility and tightness of the material) Blade diameter: 52 cm Heavy duty tempered blade for cutting various materials without problem Motorized right and left motion of the blade Ergonomic roll guide locking system with pneumatic cylinder 3-points blade cooling system Inverter controlled blade rotation and blade right-left motion Auto sharpening pneumatic motors for right and left side of the blade Additional roll presser rollers for steady cutting operation Automatic opening blade safety cover Robust structure Weight: 550 kg
Best solution for creating pillow top mattresses with a single piece of border. Eliminates one tape edge operation for pillow tops. Thanks to advanced and flexible folder system, LEON-FT100 also offers easy production of euro-top and boxtop mattresses. Specifications Adjustable folder for easy border height change With or without binding working modes Automatic thread break and material run-out sensors High speed durable chainstitch sewing head Heavy duty sewing head for heavy borders Bind seam self-tape look Servo motor driven synchronized heavy duty puller Servo motor driven sewing head Auto border rolling system at the end Perfect solution for making euro top and boxtop mattresses Ability to make double binding on the border Flexible solution for all your border binding works
The leon-pt mattress border side stitching machine is designed to make luxurious hand-stitched borders. Unlike the machines in the market, leon-pt offers not only hand-stitched border but also circle, rectangle, plus shape, s shape, and various different figures to be stitched. The leon-pt4 can make one mattress border less than 3 minutes according to number of tacks and mattress size. It offers unlimited positioning of tacks as 2-3-4-5-6 tack on each row. It offers ability to create different tack designs using the touch screen panel. No quilt repair machine: ability to continue sewing from the stop or desired point Servo motor driven motion control system Reliable jukä° lk 1900 tacking heads Automatic bobbin finish detector Smooth movement of the border for accurate and straight tacks.
TIGON Single Needle Continuous Mattress Quilting Machine TIGON is a full automatic feeding system high speed single needle quilting machine for high end luxury mattress, home textile and upholstery works. TIGON performs the whole operations of feeding with motorized rollers, quilting and cutting the quilt in length. With the ability of quilting very different products, TIGON offers perfect quilting quality for all the products from very thin garment products to thick materials for mattress industry with multiple layers including foam, visco, memory foam, latex, polyester fiber, non woven, jacquard fabric, knitted fabric, leather and down fill. Your mattresses, headboards, comforters will overtop among others with the aspects of stitch quality, pattern designs, sustaining quality as well as your efficiency. Full automatic feeding, tensioning, quilting and cutting Minimum bobbin change with XXL spools (Durkopp Adler) Automatic thread cutting in less than 0,5 second Standard length & sides cutters High human security systems Brushless servo motors Automatic fabric measure control system with great accuracy Remote & Smartphone production monitoring system Electronic position controlled fabric width adjustment Easy pattern adaptation Flexible and user friendly software : EtQuilt. High quality sewing head: Durkopp Adler Max. Sewing speed: 3400 RPM // 21 m/min (according to the material filling) Max. Jumping Speed: 60 m/min Max. Stitch area: 2.20 x 2.60 Max. Fabric width: 2.45 m Suggested needle size: 120-160 (material dependent) Number of feeding rolls: 5 (options are available upon request) Stitch length: 1-10 mm (may change according to the material filling) Automatic upper and lower thread cutting system Max. Thickness: 9-10cm (material compressibility dependent) Stitch type: Lock-stitch Automatic integrated panel cutter in length Advanced Side Cutters Automatic lubrication for the sewing head as hook and needle part Statistical production graphics Immediate error solving with visual error display Online consultation with ElektroCARE system Reliable OMRON controllers Optical barriers for human safety Durable FESTO pneumatic system with low air consumption No need for repair machine thanks to ability to start from the desired point. No need to draw again for scaling, rotating and arraying Motorized width adjustment of the clamps for different fabric width Automatic measuring of the physical maximum area of sewing to double check with the active pattern design Pattern Design Preparing Software is Included.
ET-ROLL-210 is a cost-effective press and roll pack machine with 50 tons heavy duty hydraulic pressure mechanism. The mattress is given to the machine after hand bagging, the machine automatically fulfils all the operations of compression, sealing and rolling with a wide range of adjustable exit diameter. 50 Tons hydraulic pressure mechanism Robust structure for the durability Hydraulic exit system Adjustable diameter for the exit roll Ability to manually fold the mattress after the compression and send to roll pack Additional sealing for stronger rolls Additional plastic film reserves
KYK-S is the one of the highest speed tape edge machine in the market with heavy duty, smooth PFAFF 5625 sewing head which is simply the strongest in the world. The reduced training time and operator fatigue makes the tape edging operation much easier with the day long performance stability. The motorized belt and the synchronized mattress rotating arm makes the operator stands stationary and brings easy cornering. Even the heavy premium mattresses are flipped within seconds thanks to heavy duty flipping system. The adaptable continuous mattress flow system brings the mattress to the machine and takes it out to the next stations after tape edging is done. The continuous flow system lets the operator sew all the time and reduce a great deal of labor cost. - Easily produces 200-250 mattresses in 8 hours (190cm x 90cm) - Standard PFAFF 5625 chainstitch sewing head - Ergonomic design that allows high capacity even for heavy mattresses - Comfortable cornering thanks to slippery conveyor metarial - Full automatic proccess with a single foot pedal (All the speeds are auto - adjusted according to pressing amount) - Automatic head lowering at the corners - Minimum operator fatigue - Full automatic parametric corner turning system - Automatic foot lift - Interpolated driven 90° mattress turning arm - No deformation on the conveyors thanks to the arm load hanger system
LEON-3D is the multineedle 3D border machine. It is used to add decorative secondary materials such as ribbons, 3D spacer, zippers. With the functional folder, it offers various types of border combinations. The heavy duty servo motor driven puller system eliminates the slipping fully and provides excellent stitch quality not only for single piece pre-quilted borders, but also while joining multiple layers of fabric, foam, polyester fiber, ribbons, nonwoven, etc. Various optional folders for special borders Ability to make handle with optional folder Servo driven puller cylinders Ability to Sew Zippers, 3D Spacer and Ribbons Ability to feed pre-quilted border or separate layers of border
Reyhan carpets is a machine made carpet producer in gaziantep / turkey. We have quality ranges as follows ; • 100% polypropylene pile yarn • points between 160.000 upto 1 million • pile height between 9-13 mm • weight between 1, 50kg upto 4.00kg per sqm • chenille, pp-heatset, pp fraise, pp fraise with lurex (100% olefin) • wall to wall ( broadloom ), area rugs, mosque carpets • hand carving designs is available Hs code : 5702.4290 Please kindly advice if we can do any cooperationship over machine made carpet business ? Awaiting your kind reply soon. Best regards, Engin uslu ( mr. ) Mechanical engineer ( sales manager ) 4. Organize sanayi bolgesi 83414 nolu cd. No:5 baspinar - 27600 gaziantep / republic of turkey Tel. : +90.342.357.0680/81 Fax : +90.342.357.0682 Mobile : +90.535.956.9423 ( tango, viber & whatsapp ) Web : www.Reyhancarpet.Com Email : enginuslu@reyhancarpet.Com, Skype : enginuslu78 Qq : 1651631542 Showroom : https://www.Dropbox.Com/sh/owfv4z1slxrzzvo/aaa4xnzcqi4fqc_qvongyybna Facebook : https://www.Facebook.Com/engin.Uslu.161 Nylon schrinkage
Explorer60 is full hydraulic drill rig for coring and drilling for underground galleries and surface. It can be built in different frames such as regular skid frame, three wheel trailer and hydraulic crawlers narrow or wide. Explorer60 also can be built in different feed lengths for different purposes. It has hydraulic regulated spindle to control speed of rotation between 166 rpm to 1000 rpm step less. It can be designed either with electrical engine or diesel engine. The rotation head can be swung aside for hole cleaning or grouting equipment. Explorer60 has automatic hydraulic synchronization system between chuck and rod holder to handle the rods. For stabilization it has hydraulic jacks at the top of the feeding frame. Explorer60 has also optional accessories such as larger wire line hoist, cathead or two step hydraulic water pump.
Explorer30 is the small hydraulic drill rig for coring and drilling for narrow tunnels, underground galleries and surface. It has small built so that easy to install and carry. It has hydraulic regulated spindle to control speed of rotation between 350 rpm to 2200 rpm step less. It can be operated with one person. It can be designed either with electrical engine or diesel engine. The rotation head can be swung aside for hole cleaning or grouting equipment. Explorer30 has automatic hydraulic synchronization system between chuck and rod holder to handle the rods.
a. Price of product - depends on customers product b. Product origin - Turkey c. Key Specifications/Special Features d. Minimum Order Size : 1 full Truck or 1 full container e. Packaging Details: Euro pallets- Wooden boxes or other customer-specific packaging details.
Charging Vending Machines for Service Businesses These devices provide extra income by using them in places where customers spend time. The customer inserts the coin and charges his phone at the specified charging time. It saves from cable crowds and electricity bills; increases customer satisfaction, increases the consumption of customers by spending more time in the restaurant. -The device can be produced in the requiered coin(usd,eur,.....etc). -It has a charging time of 300 minutes. -With Li-ion battery, it supports ios, type-c and android in fast charging. -The coin amount and charging time can be adjusted from the digital display. -It has a very solid stainless steel case and a coin lock mechanism. -There is a smart balance counter system with reset, you do not have to count coins. - It is very easy to use and maintain. -All language options are available. Color options, brands and all options can be provided for high volume purchases at the dealership for cities. -It has charging stands that can charge without contact, it reaches 0% to 100% charge in a total of 3 hours. -You can supply as 3, 5 and 9 charging stands according to the customer density of businesses. -It is small in size and has a weight of 1.5 kg. -For your sample requests, express shipping can be made to anywhere with UPS or DHL. With portable desktop chargers, you can be the only one in your area and become our dealer. You can rent these devices to businesses free of charge and share the profit 50-50% with business owners. It can easily cover the cost of the device in 2-3 months, you just need to check the machines once a week and get your profit. Just contact for more details and sample submission, it's really easy to be the only one in your area and earn money. Contact with us for high quantity orders and dealership opportunities.
Leon-CS2 is a CNC double heads border quilting machine for very special border designs. The optional multineedle border quilting head offers various more designs with the ability to add secondary materials on the border such as ribbons, 3D spacer, etc. High quality reliable chain stitch PFAFF 5483 sewing heads with automatic lubrication Max. Sewing speed: 3000 rpm (material dependent) Max. Stitch length: 5-6 mm (material dependent) Ability to work as single or double sewing heads Adjustable distance between the two heads Limitless 180° pattern designs with cnc control and servo drives Servo controlled sewing heads Automatic footlift Max Quilting Width: 26.5c Auto border roller Auto stop at preset yardage Smooth operation with PLC control Custom pattern programming with touchscreen EtQuilt Software Adapted on a PC Pattern Making Software Online training and trouble shooting Unlimited number of designs Weight: 700 kg Power requirement: 4 kW
Leon-3d is the multineedle 3d border machine. It is used to add decorative secondary materials such as ribbons, 3d spacer, zippers. With the functional folder, it offers various types of border combinations. The heavy duty servo motor driven puller system eliminates the slipping fully and provides excellent stitch quality not only for single piece pre-quilted borders, but also while joining multiple layers of fabric, foam, polyester fiber, ribbons, nonwoven, etc. Various optional folders for special borders Ability to make handle with optional folder Servo driven puller cylinders Ability to sew zippers, 3d spacer and ribbons Ability to feed pre-quilted border or separate layers of border
LEON-L - Single Needle Lock Stitch Border Vertical Stitch Machine High quality reliable lock stitch PFAFF 335 sewing head - Lock-stitch or Chain-stitch sewing head Threar break detection sensors Low amount of material warning system Unlimited number of linear pattern storage and creation NC axis control system Automatic needle up positioning Ergonomic design for thread recovery No operator requirement with auto stop-alert system Touchscreen Control Panel Full automatic process with PLC Max. Sewing speed: 2300 rpm Max. Sewing width: 26.5 cm (10.5 inches) Max. Stitch length: 6 mm Capacity of pattern numbers: 400 pcs Auto border roller Auto stop at preset yardage Smooth operation with PLC control Custom pattern programming with touchscreen Ability to sew limitless 180° linear patterns Weight: 500 kg Power requirement: 2.5 kW
LEON-3DS-CS2 is designed for specialized borders with 3 independent sewing heads. It is capable of sewing multiple borders and gives you possibility to draw your own designs. It can make various borders with ribbons, 3D tape, zipper while being capable of hemming the border edges. Double head CNC border quilting part provides unique designs and makes you special in the market. Advanced fabric pulling and guiding systems provide the maximum precision even with the most elastic materials The highest precision of designs thanks to fully servo driven motion system Easy Border Design Creation Robust Sewing Heads with Automatic Lubrication Various attachments for special borders
SAFIRStopcock Number3Production Capacity300-350 Porsiyon.TypeVertical(Dikey)Production SystemPompali Tap Number 3 Production Capacity 300-350 Portion. Type Vertical Production System Pumped You can produce plain, cacao and mixed Doft Ice-cream or Frozen Yogurt with the Triomax – Safir Model, fitted with three taps, double tank and air pump. Triomax – Safir Model is used in the points, having Malls and intensive pedestrian traffic, in many cities in Turkey. Furthermore, with Triomax – Safir Model, free Soft Ice-cream and Frozen Yogurt is distributed in the fairs. On Triomax – Safir Soft Ice-cream machines, French TECUMSEH is used as main refrigerating compressor and Italian ASPERA – EMBRACO compressor is used as upper refrigerating compressor. Air Pump: You can serve more bulky products with less gramage in favor of the pump in Triomax – Safir soft ice-cream and Frozen Yogurt machine.Service Capacity Per Hour: You can serve 350 portions per hour. You can serve in series. Standby mode: You do not have to operate Triomax-Safir Soft Ice-cream and Frozen Yogurt machine at night. What you need is to shut off the machine and push the “keep fresh” button. Thus, your machine provides energy saving as well as it keeps the material at +4 degree in order to make it ready for the service next day. Washing Mode: You can wash your machine in the automatic washing mode by using the washin button on the control board of your machine. Trainings are provided during the installation of your machine. Moreover, the washing process is indicated in the user manual and videos in our website. Hardness Degree: The values such as machine operation area and air temperature affect directly the service quality of the product as well as affecting the performance of your machine. Triomax- Safir Soft Ice-cream machine has a module on which you can adjust the service coldness degree and your sales continue in a healthy way without being affected by the environment change. Accessories: The standard is 1 piece of triple cone box, 1 piece of service tray, 1 piece of decorative umbrella and and tap apparatus allowing services of pasta-shaped ice-cream.
Concrete Batching Plant And Spare Parts Concrete Pump Spare Parts Truck-mixer Spare Parts Tower Crane Spare Parts Used Concrete Machinery And Tower Cranes
Using as a alternative spare part for relevant machine. As Razor Spare Parts, we provide our business partners and buyers in the best way by offering many back services besides production. Our products can used easily for relevant machines and easy to operate. High guality production and with using life, Razor Spare Parts products separate other firm and companies. With the first-class productions of our target products in the spare part area, we offer services with the highest quality products as well as our competitors for atlas copco, furukawa and ingersoll rand spare parts We have services for part and the whole product. We are taking strong steps to strengthen our position in the industry and to be in the international market by offering service and solution suggestions to our customers and business partners for many products, especially atlas coppo, in hydraulic breakers and rock drilling equipment. Pulley_whell_3128078430, Pulley_whell_3128078430_TR, Pulley_whell_3128078430_turkey, Pulley_whell_3128078430_epiroc, Pulley_whell_3128078430_atlascopco, Pulley_whell_3128078430_atlas_copco, 3128078430, 3128078430_epiroc, 3128078430_atlas_copco, 3128078430_TR, 3128078430_turkey, 3128078430_best_price, 3128078430_high_quality, 3128078430_mining_machine, 3128078430_spare_part, 3128078430_drilling_part, 3128078430_razor_spare_parts, 3128078430_razorsparepart, 3128078430_atlascopco, drilling_blasting, epiroc_spare_parts atlas_copco_spare_parts mining_machine_spare_parts drilling_equipment hydraulic_drill_spare_parts , razor_spare_parts
