Figure tutsuluk are manufactured with natural stone stone powder. Carving wood by hand to the table raw and real tutsulug have been shaped by beech tree was used. And bring out the texture of the tree to protect the tree and the colors are 1. Class teak oil has been applied. Incense ash to avoid the middle part of the tree is carved in. Stick incense, in order to be opened a small hole on the inner side of the mouth of the figure. 3 organic brand satya incense are sent as a gift. (15 g), Bamboo Bar, wood dust, plants, honey, prepared with organic oils and incense resins are produced with the traditional method of hugs in India. Do not contain carbon. The texture of clay models made with stones collected from the coast of Assos has been transferred from the mold after it was taken. Finally, the mold is manufactured with the loss of the dust to the actual stone figure. Stone height: cm head length ranged from 7.5 cm 28-30 CM. It is handmade in the tone to be sent because there may be very little difference in the texture and color of the figure. We use the natural patterns of the wood to be sent to the color of the base and contains a diversity of. In the gallery you can see examples of the base product to be sent.
Figure tutsuluk are manufactured with natural stone stone powder. Carving wood by hand to the table raw and real tutsulug have been shaped by beech tree was used. And bring out the texture of the tree to protect the tree and the colors are 1. Class teak oil has been applied. Incense ash to avoid the middle part of the tree is carved in. Stick incense, in order to be opened a small hole on the inner side of the mouth of the figure. Organic Satya incense gift box are sent as a brand. (15 g), Bamboo Bar, wood dust, plants, honey, prepared with organic oils and incense resins are produced with the traditional method of hugs in India. Do not contain carbon. The texture of clay models made with stones collected from the coast of Assos has been transferred from the mold after it was taken. Finally, the mold is manufactured with the loss of the dust to the actual stone figure. Stone height: cm head length ranged from 7.5 cm 28-30 CM. It is handmade in the tone to be sent because there may be very little difference in the texture and color of the figure. We use the natural patterns of the wood to be sent to the color of the base and contains a diversity of. In the gallery you can see examples of the base product to be sent.
Figure tutsuluk are manufactured with natural stone stone powder. Carving wood by hand to the table raw and real tutsulug have been shaped by beech tree was used. And bring out the texture of the tree to protect the tree and the colors are 1. Class teak oil has been applied. Incense ash to avoid the middle part of the tree is carved in. Stick incense, in order to be opened a small hole on the inner side of the mouth of the figure. Organic Satya incense gift box are sent as a brand. (15 g), Bamboo Bar, wood dust, plants, honey, prepared with organic oils and incense resins are produced with the traditional method of hugs in India. Do not contain carbon. The texture of clay models made with stones collected from the coast of Assos has been transferred from the mold after it was taken. Finally, the mold is manufactured with the loss of the dust to the actual stone figure. Stone height: cm head length ranged from 7.5 cm 28-30 CM. It is handmade in the tone to be sent because there may be very little difference in the texture and color of the figure. We use the natural patterns of the wood to be sent to the color of the base and contains a diversity of. In the gallery you can see examples of the base product to be sent.
Sulphur is a non-metallic chemical element identified by the letter S. Sulphur is obtained as a co-product recovered from oil and gas production in sweetening process. It is the primary source in the production of sulphuric acid. Sulphur is considered a strategic raw material. It is one of the important product for agricultural and industrial sectors. It is tasteless and polyvalent nonmetal which is in the form of yellow crystals and obtained from Sulphide and Sulphate. Sulphur is a valuable commodity and integral component of the world economy used to manufacture numerous products including fertilizers and other chemicals. It is so widely used in industrial processes.
This product is vegan and contains all natural ingredients. It contains immortal flower essential oil and resveratrol obtained from red grape seeds. The product has strong antioxidant, anti-aging, and cell rejuvenating effects. It strengthens the skin's defense mechanism against aging, provides moisture, repairs, and nourishes the skin. With its antioxidant feature, it repairs, and rejuvenates the skin. It protects the skin against the signs of aging. With age and the harmful effects of the sun, skin's pigmentation might deteriorate. The product helps prevent deformation in skin's pigmentation caused by the harmful effects of the sun, balances the skin tone, and brightens the skin.
Descriptions; Speed Control from Touch Screen Photocell System for Printed Packaging Reinforced Paper Cutting System Easy Adjustable Motorized Format System Long-Life Cams With Heat Treatment and Special Oil Coating Heat Treated Gears And Chains AISI 304 Quality Stainless Steel Conveyor Plates AISI 304 Quality Stainless Steel Top Table And Hanger Columns Our machine has very competitive price with high quality standards. We use the very best European quality brand components such as SKF, Festo, Siemens, FAG, Nord, etc in our equipments.
String wound cartridges used as filter material are manufactured especially for the filtration technology. Apart from polypropylene and natural cotton, PROSES T.I.M. produces a wide-range of filters made from polyester, white cotton, nylon, glass fiber, and acrylic filter yarns as well. with all micron rates used in any liquid filtration process, like: water, dairy, medical, oil, petroleum, etc... String wound filters are produced in 5", 9.75", 10", 20", 30", 40", 50" with a PP body core and also SST core.
Food processing machinery, mixers, melting oil, pasta machines, chocolate enrobing machines, parts washing machines, doner kebab, bakery machinery, Rotating basket parts washing machines series 1000, rotating basket parts washing machines series 1250, rotating basket parts washing machines series 1500, chocolate coating line, chocolate coating, cooling tunnel, chocolate decor, mobile hopper system, wire mesh conveyor, stock tank for chocolate dicor, granule pourer, feedback conveyor, caramel coating line, chocolate coating facilities, oil melting tank, .ball mill 250kg, pre mixer, stock tanks, double anchor z mixers, lab type mini v mixer, lab type v mixer, v mixer, 100 500lt v mixer, dough mixer, pasta machine, kneading mixer, chocolate grater machine, doner kebab, mini filling machine.
chemical and fuel stock tanks, complete lube oil plants, complete liquid oil plants, tanks for chemical substance plants, the tanks for complete asphalt production plants with and without heating, fuel tankers on trucks and trailers, asphalt tankers (bitum tanker) on trucks and trailers, heated asphalt tankers on trucks and trailers, asphalt paver vehicles (distributors) on trucks and trailers, chemical tankers on trucks and trailers, food, water and chemical tankers from stainless steel, water tankers on trucks and trailers, irrigation tanker, sprinklers tanker, tippers on trucks and trailers, steel box on trucks and trailers, lowbed trailer, container trailer, mobile repair maintenance vehicles, mobile vehicles, tipper trailers, water tankers tippers, container fuel tank, container asphalt (bitumen) tank, mobile station, demonte mobile station kit production..
The aim of the high-level protective mask project, in which our company started R&D studies, was to produce a high-level protective mask that eliminates the risk of infection of healthcare personnel who have a high risk of infection and have contact with infected patients. In the new product we have developed, 5-layer nonwoven fabric is used. The fabric used in the second layer is a type with high level of liquid retention. The reason is that microorganisms cannot move inside in any way by holding here because of the specially coated solution. This essential oil blend is crosslinked with a polymeric structure. In this biocompatible polymer structure, first a hydrogel obtained from seaweed and then a different hydrogel obtained from sea shells was used. These structures have been developed by applying the N-Capsule (Nano Capsule) technique and have antimicrobial properties. The feature of the solution that is specially coated on the nonwoven fabric in the second layer of our product; It is a mixture of completely natural vegetable essential oils, biocompatible polymer structures and biocompatible hydrogels. The benefits and properties of the vegetable essential oils used in the solution have been proven in academic studies on this subject. The most important of these features are that the ingredients have antibacterial, antifungal and antiviral properties. It has been proven in the literature that it is natural, herbal and biocompatible, and has no side effects on humans and animals. 5 Layers: 1- 50 gsm Spunbond 2- 50 gsm %50 Viscon %50 Polyester 3- 25 gsm Meltblown 4- 25 gsm Meltblown 5- 30 gsm Spunbond As a result of the test, the document dated 07/04/2020 and numbered E.6696 and numbered 68636013-622.01, conducted with the Molecular Microbiology Laboratory of T.R. University Faculty of Medicine, Department of Medical Microbiology, , it was proved for the first time in the world that our mask does not pass the SARS- CoV-2 (covid-19) virus. Catalogs:
CKM Defense Road Blocker CKM Defense Hydraulic Road Blocker is the most widely used system in areas where entry and exit should be controlled and safe against all kinds of vehicle attacks, such as military facilities, government buildings, embassies, production facilities, oil refineries, hotels, airports, and stadiums. The system is specifically designed against vehicle impacts, and its components have been reinforced to be effective in all possible attack scenarios. Thanks to its hydraulic operating system, the CKM Defense Road Blocker System works continuously even in the busiest places. This system synchronizes with other security systems such as swing barriers, rising bollards, etc., keeping the defense at the highest level in case of attack, while allowing authorized vehicles to safely enter the area. It can be integrated with all kinds of Access Control Systems such as Plate Recognition Systems, HGS (Electronic Toll Collection-Fast Pass) Systems, Card Readers. TECHNICAL FEATURES Unit operating voltage: 380 VAC, 3-Phase, 50/60 Hz Length: 3111 mm, 4111 mm,5111 mm, 6111 mm �±20 mm Height above ground: 780 mm �± 10 mm The part buried under the ground: 1050 mm �±10 mm Width: 1350 mm �± 10 mm Color: Yellow Black Painted (RAL 1028, 9005) Collision unit: Steel Sheet and NPU NPI steel bar construction Wall thickness: 10 mm Surface coating: Electrostatic painted Corrosion coating: Shot blasting, epoxy under coating, electrostatic painted Turn On/Off Time: 4-6 sec. Emergency Take Off Feature: 2-3 sec. (optional) Turn On/Off Capacity: 1000 / day Power Engine: 4 kw or 5 kw , 380 V AC, 3-Phase Operating temperature range: -25 / 60 C Work System: Hydraulic system Hydraulic piston: 2 qty Hydraulic power unit: Industrial hydraulic pump, oil level and temperature gauge, manual hand pump Automation routing: 220 V two way solenoid valve Hydraulic pressure: 40-80 Bar Hydraulic tank: 30-50 liter Hydraulic hose: R2 3/8 330 Bar hose Hydraulic oil: 46 no. hydraulic oil Hydraulic system heating/cooling: Oil heater/cooler (optional) Control Cabinet: Cabinet Dimension: 900 x 900 x 700 mm (height, length, depth) Control System: Remote control,button control (optional), access systems (optional) Control Panel: Compatible with PLC base control, micro process control card, access systems devices (Access card, plate recognition system, finger print reader etc.) Manual Usage: Manuel hand pump, Warning Equipment: Warning light (optional), traffic lamp (optional), sound warning (optional) Protection System: Loop detector, photocell (optional) Drain pump: Optional concrete Infrastructure: C 35 concrete Power failure working status: Battery (optional)
Available Valves : 1- Piston Valves 2- Globe Valves, 3- Bellow Seal Valves 4- Non-Rising Stem, Soft Seated Gate Valve 5- Knife Gate Valve, 6- Ball Valves 7- Stainless Steel Ball Valves, 8- Stainless Two Piece Ball Valve Flanged 9- Ball Valves with Mounting Pad 10- Wafer Type Butterfly Valves 11- Lug Type Butterfly Valves 12- Wafer Type Butterfly Valves for Natural Gas 13- Brass Valves for Water 14- Swing Type Check Valves 15- Solenoid Valves for General Usage 16- Earthquake Valves 17- Strainers 18- Safety Valves 19- Full Bore Ball Valve, 20- Monoblock Valves for Water, 21- Monoblock Valves for Liquids, 20- Monoblock Valves for Natural Gas, 21- Lift Type Check Valves, 22- Wafer Type Swing Check Valves, 23- Wafer Type Disco Check Valves, 24- Double Plate Check Valves, 25- Double Acting Pneumatic Actuator, 26- Electric Actuators, 27- Worm Gear, 28- Pneumatic Actuator Accessories, 29- Seperators, 30- Air Seperator, 31- Balance Container, 32- Air Tube, 33- Dismantling Joint, 34- Pilot Operated Pressure Reducer, 35- Pressure Reducing Valves, 36- Dynamic Balance Valves, 37- Threaded Static Balance Valves, 38- Flanged Static Balance Valves. Please send us an email together with your official "Letter of Interest" document by mentioning requested product details and quantity. Note: Pricing process may take 2 or 3 Work days to be finalized. Thank you in advance for your kind patience.
Product transfer is one of the basic requirements for the industry. For the electromechanical systems used for this purpose to work, they must have the ability and durability to work sustainably. With all our production and heavy industry experience, Our supplier is ready to be your solution partner in conveyor, screw and elevator systems for different industrial sectors and needs. Our supplier is a turnkey implementer in projecting, production, field montage and automation and management. They are also experienced in special systems that require very special production.
Our Supplier has a wide range of products and service areas in industrial drying. There are 3 important features on the basis of the drying systems they apply: sustainability, efficiency and durability. Our supplier's thermodynamic engineering experience in the design of their drying systems enables their drying systems to become more efficient. In all of our supplier's drying systems; design that will provide easy maintenance and cleaning, automation system that will manage energy in the most efficient way in terms of thermodynamics, fire safety, inverter-controlled air circulation to minimize the waste heat in the drying exhaust, ability to work in different temperature profiles and material types, and the strength required in heavy industry conditions durability is taken into account.
Custom Made Heat Exchanger : Our supplier has produced many of heat exchangers in many stainless and metal material derivatives that require special design and manufacturing for our customers. The heat exchangers they produce work safely in many areas such as automotive, cement, ceramics, steam systems in the sector. All products are manufactured using world class welding skills based on universal technical and environmental principles. There are no manufacturing-related restrictions on the size of the heat exchanger required by our customers. Products that are not suitable for transport in one piece are designed to be part-assembled Welding Quality : Our supplier performs WPS and PQR welding procedures with trained and competent personnel. They perform welding x-ray examination under all conditions, including the possibility of welding in welding types such as robotic, argon, gas metal, electrode, and post-welding heat treatment, and pressure vessel class products under welding standards. Why Custom Manufacturing? : The need for different heat exchanger design and production parameters for different industrial areas is a natural process. The solution for non-fabricated heat transfer products is designing and producing according to needs
Machining is a controlled production process used to create high-precision parts. In addition to precision machining that requires special production, our supplier is providing their services by combining traditional and modern technologies, both welded and weldless. They are able to respond many production needs, including heavy-duty custom-made machine parts, with the machinery accumulation and experience they have gained at the end of more than a long period of engineering experience. Do not hesitate to contact us for all your special needs that require machining, welded and non-welded manufacturing. General Usable Raw Materials: - Aluminium, Stainless Steels - Bronze, Brass, Copper, Titanium Alloys - Engineering Plastics - Steel Grades
We have in total of 531 pieces different style of Carpets including Modern, Classic, Simple, Child Room, Round, Oval, Plain. Because Quotation price can change according to your Carpet Choice, we kindly request you to send us an email together with your official "Letter of Interest" document by mentioning all details of your request.
Our supplier has 65 years of experience of the production and export of canned sweet corns to more than 19 countries. They have the following quality Certificates; "Halal Certificate", "BRC Global Standarts Certificate", ISO 9001and ISO 22000 Certificates, "FDA Food Safety" Certificate. PRODUCT DETAILS : Country of Origin : Turkey Payment Terms : 35% advance payment with the order confirmation and before shipping, the invoice must be paid in full Delivery Terms : FOB Ambarli Port / Istanbul MOQ : 1x40 Feet Container OR 2x20 Feet Containers Shipment Time : It will be informed of the exact day after the order confirmation but please consider it will be 30-35 calendar days. Brand Name : Brand Name of our supplier will be indicated in every can Available Packaging Types : - Gross 220 Gr Tins, - Gross 3.000 Gr Tins
Our supplier is one of the few accredited companies in Turkey that has TSE 13084 Industrial Chimney Certificate. Industrial chimneys must be designed and implemented by authorized companies like our supplier. Please contact with us for your needs regarding Custom Made Industrial Chimney Systems.
Dust collecting system is a vital component in many industrial facilities in terms of minimizing the damage to the environment. The bagged dry type dust collectors of our supplier are known for their high quality construction structures and sustainable working performances. Thanks to more than a long period of engineering experience, our supplier has gained an undeniable experience in the manufacture, optimization and application of bagged dry type dusters. This know-how allows our supplier to design and produce in a way that overcomes many of the common problems that other manufacturers can not, while providing sustainable benefits to our customers. All of the products are produced with the concept of heavy-duty type. STANDARD ACCESSORIES: - Centrifugal Fan: It is a first class equipment in accordance with the standards, operate silently complete with direct coupled or belt-pulley driven motor and without vibration. Fan power and energy consumption vary on the filter model. - Pulse Valve and Air Cylinder: Pulse valves are made of die-cast aluminum body and are 1�½â?? in size. They operate at 24V DC standard voltage. The air cylinder, on the other hand, is suitable for pressure vessel technique and is large enough to store enough air in the two-explosion interval. - Fan Control Panel : It is made of hard plastic materials with time-controlled control, magnetic thermal switch, contactor, motor protection relay, direct current transformer, working-fault lamps to provide fan and pulse controls. - Solenoid driver with Differential Pressure Control : Thanks to a differential pressurestat that will detect the pressure difference at the filtering inlet and outlet, it saves compressed air consumption by keeping the pulse blasting interval long while the filters are clean. In case of contamination of the filters, it warns for timely replacement without clogging. - Air Lock: It is an element made of cast body, external bearing bearing, motor and reducer group, which ensures that the filtered dust is discharged continuously from the unit in case the dust density in the polluted air entering the filter is high. Please contact with us for optional Accessories.