Pathfinder10 is drill rig for coring and drilling, . It can be built on different frames such as regular skid frame, wheel, truck and hydraulic crawler. It has hydraulic regulated spindle to control speed of rotation between 53 rpm to 897 rpm step less. The rotation head can be swung aside for hole cleaning or grouting equipment. Pathfinder10 has automatic hydraulic synchronization system between chuck and rod holder to handle the rods. It has hydraulic jacks at the top of the feeding frame for stabilization. Pathfinder10 has also optional accessories such as hydraulic mud mixer, water flow meter, hydraulic mud pump (140 lt/min), high torque, shock absorbent and second rod holder. 72 rpm181 rpm
We offer you copper foil, copper rod, copper wire, aluminium foil , steel and more metal materials through our worldwide suppliers. in case of interest pls send your requirement details asap to our e- mail so can proceed fast and properly along with all related parties.
MAK 8M32 Marine Main Engine Also if you like we can offer stock of great condition spare parts from piston ,liner ,connection rod ,std. crankshaft, complete cylinder head ,std camshaft ,fuel pumps and more, Please do not hesitate to contact for more information or other needs.
Std Crankshaft Great condition Complete MAN 12V28/32 Complete Marine Engine Also We have stock of used spare parts available. Piston ,Fuel pump ,Connection rod , cylinder head ,Liner ,water pump,Camshaft and more...
Quality: EN10244-2 ASTM A 641/A and other international norms. Coating:heavily galvanized EN10244-2 Class A, AB, B Dia: 1,00mm-10,00mm Raw material: wire rods (SAE1006,1008,1010,1070) Zinc: high-purity zinc alloy containing 5% aluminium with addition mischmetal (Lanthanium+Cerium).
Explorer30 is the small hydraulic drill rig for coring and drilling for narrow tunnels, underground galleries and surface. It has small built so that easy to install and carry. It has hydraulic regulated spindle to control speed of rotation between 350 rpm to 2200 rpm step less. It can be operated with one person. It can be designed either with electrical engine or diesel engine. The rotation head can be swung aside for hole cleaning or grouting equipment. Explorer30 has automatic hydraulic synchronization system between chuck and rod holder to handle the rods.
Brief Introduction of Wire Mesh Cable Tray Systems: These are thicker and therefore stronger than apparently similar products. Cablofil incorporates a unique T welded safety edge resulting in performance comparable with traditional cable tray but with many added benefits. Features and Benefits of Wire Mesh Cable Trays: 1. Electroplated Zinc Finish 2. Fast Easy Installation 3. Mesh Design Allows Cable Exit or Entry at any point 4. Clear Cable Identification 5. Supplied in 3 Metre Lengths 6. Significant Cost Savings Compared to Standard Tray Products 7. Simple Creation of Fittings on Site 8. Wide Range of Sizes 9. Heights Shown are Internal Dimensions Manufacturing: Optional Material for wire mesh cable tray: Black Steel, Stainless Steel, Aluminium, Alloy, Fibreglass Reinforced Plastic (FRP) Mode: Top curved / Top Straight Surface Finish: Zinc-plating, Hot-dip Galvanizing (HDG), Powder-coated, Pickled & Passivated. Color: Optional Suggestions: 1). MATERIAL The choice of materials is a matter of the physical and mechanical properties produced by each, compared against the intended function, as well as the environment, in which the trays are to be installed. 2). SURFACE FINISH: A). Zinc-plating cable trays are suitable for indoor use. The place where cold zinc-plating cable trays would work should be dry, ventilated, and corrosion free. B). Hot-dip Galvanizing (HDG) cable trays are not suggested for wire mesh cable trays. C). Powder-coated cable trays should be carried out in alkali and salt corrosion free site. D). Pickled & Passivated should be used to stainless steel wire trays. Specification for power and communications cabling containment. 1). SCOPE Steel Wire Cable Tray conforming to the material and performance of this specification. 2). GENERAL A). Cable tray shall be manufactured from steel wires, welded together and bent into final shape prior to surface treatment. B). Surface Treatments: i). Electro zinc plated to BSEN 12329-2000 for interior use (level 2) ii). Hot Dipped Galvanised with between 60 and 80 microns of zinc to BS 729. iii). Stainless Steel AFNOREZ CND 17.2 (AISI 316L) C). Steel Wire Cable Tray Widths & Depths i). Cable Tray dimensions are all internal. ii). Depths of 30mm, 54mm, 80mm, 105mm & 150mm iii). Widths of 50mm, 100mm, 150mm, 200mm, 300mm, 400mm 450mm, 500mm & 600mm for depths of 30mm & 54mm. iv). Widths of 100mm, 150mm, 200mm, 300mm 400mm & 500mm for Depths of 105mm & 150mm All trays are of 3005mm long 3). SPECIFICATION a). Steel Wire Cable Tray will be produced from lateral and longitudinal sidewall steel wires, with minimum diameters of -: 4 mm for trays of widths up to 150mm 4.5 mm for trays of widths of 200mm 5.0 mm for trays of widths of 300mm 6.0 mm for trays of widths of 400mm, 450mm, 500mm and 600mm b). Trays will be manufactured with a longitudinal 'T-welded' safety edge along the top wire of the sidewall (excluding CF3050) c). Trays will be constructed with a 50mm x 100mm mesh configuration. d). All tray fittings (e.g. changes in direction, level and size) shall be constructed on site, to the manufacturers instructions, using side action bolt croppers and fastened using 25mm and 30mm counter clamps with M6 bolts and nuts, all surface treated as the tray. e). Trays will be coupled together using either a fast spring coupler or a 25mm/30mm counter clamp combination with supporting lateral splice plate on trays over 300mm width. The coupling will have the same surface finish as the tray. f). Trays shall be supported at a maximum span of 2.5m by trapeze, wall, floor or channel mounting methods and will not exceed maximum loads as specified by the manufacturer. g). All welds will be manufactured to an average minimum tensile strength of 500Kg per weld. 4. TESTS, CERTIFICATION AND CONFORMITY a). Loading and deflection characteristics of the tray should be tested and the results published in accordance with the European Standard CEI/61537. b). Suitability for the support of Cat6 data cabling should be demonstrated by way of independent test verification. c). Fire test certification should be published in accordance with the E30/E90 standard. d). Electrical continuity across a coupling should be demonstrated by means of a published test method and result. We are able to design styles in various specifications according to the drawings and/or samples by the clients. And we offer fair price, excellent quality, quick delivery, continuous improvement. We own customer satisfaction. You can trust on us that we are the leading manufacturer of cable trays. PSC
Reinforcing Bar, Steel Billets, Merchant bars, Profiles (Angles,Flat bars,IPN ,UPN, IPEAA) , Wire Rods, Pipes, Cold Rolled Coils/Sheets, Hot Rolled Coils/Sheets,Galvanized Coils/Sheets, Aluminized Coils/Sheets.
Brake parts, axle parts, engine parts, air suspension parts, clutches, electrical parts, filters, gaskets, seals, plastic body parts, quick running parts of axles and chassis, mirrors, steering rod ends, sun visors, DAF, Mercedes, MAN, Volvo, Scania.
Medium voltage indoor and outdoor, disconnectors, low voltage and double throw disconnecting switches, low voltage load disconnecting switches, low voltage fuse disconnecting switches, earthing plates, earthing rods, earthing bonds, faraday cage, copper connectors, lighting fixtures, alpek iron equipments.
Explorer60 is full hydraulic drill rig for coring and drilling for underground galleries and surface. It can be built in different frames such as regular skid frame, three wheel trailer and hydraulic crawlers narrow or wide. Explorer60 also can be built in different feed lengths for different purposes. It has hydraulic regulated spindle to control speed of rotation between 166 rpm to 1000 rpm step less. It can be designed either with electrical engine or diesel engine. The rotation head can be swung aside for hole cleaning or grouting equipment. Explorer60 has automatic hydraulic synchronization system between chuck and rod holder to handle the rods. For stabilization it has hydraulic jacks at the top of the feeding frame. Explorer60 has also optional accessories such as larger wire line hoist, cathead or two step hydraulic water pump.
Precise machined parts Producing and assembling the critical parts with closed tolerance made of titanium, stainless steel, aluminium alloys and brass, copper, engineering plastics etc. The company is certified to AS9100 Quality Management System and it is an approved supplier of TAI, TEI, Alp Aviation. Medmakina is also working with main contractors on several aerospace industry projects mostly in engineering and manufacturing fields. Programs supported with aero-structural parts are; Boeing, Airbus, JSF. Special Processes such as surface treatment, heat treatment, welding, marking etc. are outsourced to NADCAP approved suppliers. -
Precise machined parts Producing and assembling many critical parts with closed tolerance made of titanium alloys, stainless steel alloys, graphite, inconel, silvar, aluminium alloys, brass, copper, teflon, delrin etc. For the main projects (missiles, night vision, micro-wave systems, optic systems etc.) of aerospace & defense industries. Secondary operations for final process such as surface treatment, heat treatment, marking etc. According to requested mil standards (and/or aisi, din norms). Our customers/references: tai aerospace ind., aselsan (hc, mgeo, mst divisions), roketsan missiles co. -
Bolts , Nuts U-bolts, Hexagon, Flange, Allen And Other Types Of Bolts, Rods, Fittings And Road Safety Fasteners, Anti Theft Fasteners, Stud Bolts And Special Fasteners (from M6 to M64) for industries of Automotive, Electric Power Transmission, Road Safety, Telecommunication, Lighting, Solar Energy, Construction Building, Steel Constriction, Heavy Machineries, Agricultural machineries, Wind tribune , Furniture and Lumber industry. Also can give service for special products as our customers requirements too.
Variety kinds of fixing materials (clamps), including multifunctional profiles, dowels, nuts, Screws, bolts, pipe clamps( pipe clamps with head, pipe clamps with nut, pipe clamps with combi nut, pipe clamps for heavy load with nut, pipe clamps for heavy load with head, pipe clamps with bolt, pipe clamps used for ventilation purposes, pipe clamps with (without) rubber, double pipe clamps, multifunctional clamps. Channels as (u, c), g-clips and other products.
Construction hardware, nails, screw, anchor, plastic anchor, bolt nut, foams,clemps, welding electrodes, door locks, furniture locks, furniture accessories, hinges, drawer rails, sliding bars, hidden shelf fixing accessories, plastic base foots, flanges, rod holders, cable ducts, steel wire springhand tools, air tools, hosespacking tools, workers garments, safe boxes, rigging hardware bands, mail boxesallenstes, calipper, carabins..
Fixing materials, pipe clamps (with head, with nut, with bolt) pipe clamps for ventilation purposes, pipe clamps for heavy load, multipurpose pipe clamps, c-channel, u-channel, l-channel, double pipe clamps, screws, bolts, nuts, rods, anchors, bolt adaptors, washers, g-clips, extention nuts, brick cavity inserts, turbo lets, plastic dowels, u-bots, base plates, sliding braces, pipe clamps with long & standart bolt, towel heaters.
Hydraulic refuse packers: The packer consists of a body mounted on a chassis, a tailgate with compresion mechanism, an ejection plate inside the body, the hydraulic installation and control mechanism. All the functions and load distribution of the HRP are properly arranged according to the technical specification of the chassis truck on which it is mounted. The equipment is manufactured in serial production principals taking into account the legal regulations. Body: The body is manufactured from steel plates. All the body is reinforced with U sectioned vertical steel profiles. There is dirty water tank in front bottom of the body and a discharge hose. The body is mounted on the vehicle chassis with elastic elements.Crossing members under the body pass through C sectioned subframe, thus supporting the floor plate rigidly. Ejection plate: Ejection plate moves in the NPU rails welded above from the floor to the inner sides of the body. Ejection plate has easily replaceable poliamid shoes with bolted. Ejection plate moves by means of a double acting telescopic cylinder. It is kept at the rear of the body when it is empty, and moves automatically to the front by means of a counter pressure valve as the refuse is packed in the tailgate. Tailgate: Tailgate is connected to the body with top hinges and opened upwards by means of two double acting hydraulic cylinders. It is locked automatically when it is closed. Top hinges, locking hooks and the hydraulic cylinders are placed in the same line preventing additional stress on the rear frame. There is a specially formed sealing element mounted on tailgate to prevent any dirty water leakage from the body. It is made from a rubber which resists wear and acids. There is a hopper made from wear resistant high carbon steel in the tailgate. The refuse being loaded in the hopper is pressed into the body by means of a compression mechanism powered by double acting hydraulic cylinders. There is a dirty water discharging tap under the hopper. The compression mechanism consists of a slide linearly moving in the rails on the sides of the tailgate and a showel radially moving on the tip of the slide. Movement of showel is made by the two double acting hydraulic cylinder mounted on top of the slide and movement of the slide is made by two double acting hydraulic cylinder mounted on the outer sides the tailgate keeping them out of the refuse loading area. The rails are made from thick solid steel bar and the slide has four anti-wearing high density nylon shoes moving in the rails. The shoes are easily replaceable from the outside since the rail is open type. The slide has also for centering shoes to keep it in central position securely. There is a safety bar hinged under the tailgate to be used between the body and the tailgate to keep the tailgate securely opened during the maintenance. There are also antidropping safety valves on teh hydraulic cylinders which are opening the tailgate to prevent it to fall down because of any defect even a hose burst. Hydraulic installation: Hydraulic power is obtained by means of a hydraulic gear pump mounted to the PTO on the gearbox of the chassis. Capacity of the pump is so chosen that, adjusted compression cycle is achieved in the tailgate. PTO is controlled from the cab. Hydraulic oil tank has suction filter, return filter, a venting cover, a level and temperature indicator, a ball valve at the suction line, and a discharge tap. All piping is made with cold rolled, normalised and phospate coated tubes according to DIN 2391 C norms. All the connections are of EO type and according to SAE 100 R4. All the hydraulic cylinders are made from honned tubes according to DIN 2391 C norm and hard chrome plated rods. Hydraulic cylinders are designed and manufactured by EFE. Opening-closing at the tailgate and forward-backward movement of the ejection plate are controlled manually by the two spool directional controlled valve mounted in front right of the body. The movement of slide and showel mechanism is controlled automatically by a three spool electro-pneumatically controlled directional control valve mounted on the tailgate. Lifting device is controlled manually by one spool of the valve. Container lifting device: There is a container lifting device to lift and tilt the refuse containers into the hopper. Operating sequence & electrical control: Refuse is loaded into the hopper by means of the container lifting device, then, it is pressed into the body by the slide-showel mechanism working in sequence. The operator just pushes a button. Working sequence is provided by a printed electronic card, limit and pressure switches and buttons. The control box is placed on the rightside of the tailgate and is completely hermetic. There are start, stop, emergency, driver signal and engine accelerating buttons and a switch to choose continuous and single cycle compression. When the emergency button is pressed, the compression cycle movement reverses adn stops at the beginning position. Each of the movement can also be controlled by levers located on rightside of the tailgate manually in case of any defect in electricity or in special cases. The refuse is discharged by means of ejection plate after openning the tailgate. Accessories: Container lifting system Hinged safety bar between the tailgate and the body to be used during maintenance. Rear light for night works. Two foldable operator steps at the rear with safety bars. Rotating yellow beacon. Mudguards and hard rubber flaps Dirty water tank in front of the body.
Material Stainless steel Length 80 cm Diameter 16 cm Weight 3.60 kg Operating temperature -25C / 90C Standart NFC 17-102 / 2011 Max. Current Strength 200 kA Time to catch 71 µs
Material Stainless steel Length 51 cm Diameter 16 cm Weight 3 kg Operating temperature -25C / 90C Standart NFC 17-102 / 2011 Max. Current Strength 200 kA Time to catch 63 µs