CS-613W is 2-component water-based premium epoxy product. CS-613W as admixtures can improve the properties, particularly in relation to water absorption reduction, toughness enhancement, vibration damping and increase of the bond strength of cement to reinforcements other than being used as admixtures, CS-613W is used partial replacement of fine aggregate, for coating, sealing and repairing concrete and for coating steel reinforcing bars for corrosion protection. AREA OF APPLICATIONS Repair mortar for concrete areas. Industrial flooring. Bonding agent for new to old concrete. As water based primer. Can be applied with damp surface. FEATURE Weatherproof and waterproof of capabilities that help prevent the deterioration of the ground-coat material. Low odor. Washable with water including tools. Best to wash as soon as possible before it hardens.100% water resistant when cured.
CA-010P as a water-based primer in relation to water absorption reduction and increase the bonding strength of cement to reinforcements other than being used as admixtures increase the mechanical properties and the adhesion of the hardened material. AREA OF APPLICATIONS Repair mortar for concrete areas Industrial flooring Bonding agent for new to old concrete Enhance adhesion strength of mortar
DESCRIPTION Bituminous Primer is product containing oxidized bitumen and a mix of technical quick drying solvents. APPLICATION Bituminous Primer is recommended to block the dust and the porosity of concrete surfaces allowing the quick application o f the bituminous polymer membranes, both with flame application and cold bonding with bituminous sealants or with self adhesive membranes.Bituminous Primer allows quick film drying, has an excellent penetration and adhesion to the support for the absence of surface stickiness. INSTRUCTIONS FOR USE Concrete surfaces must be dry, clean and free from oil, dust or release agents. This type of primer is ready for use after mixing it. Bituminous Primer can be either sprayed or applied by means of roller or brush. In case of hot application of membranes with flame, the primer can be used only if surfaces are completely dry. On the contrary, if the surface is damp, it is recommended to use a bituminous primer specific for damp surfaces. The drying time depends on concrete porosity, on the quantity of product applied and on the temperature of both the surface and the environment. Usually the film gets dry after 2-4 hours from the application. The drying time can increase in case of cold temperature and with low a bsorption surfaces. PACKING 5 gallon Bucket SHELF LIFE The product can be stocked in closed buckets and in dry area, far from UV rays for 12 months. TOOL CLEANING After use clean tools with common solvents.
DESCRIPTION CC-600SP is a two component, solvent-free epoxy system with high chemical resistance and high bond strength. The epoxy may be applied as a primer for most high end industrial coatings, like Epoxies, PU. CHARATERISTIC Easy apply Low odor High bond strength Abrasion resistant Chemical resistant APPLICATION Concrete coating Cement
DEACRIPTION Rockflex-BRH is a specially modified styrene butadiene rubber emulsion with widely applicable for use in repair and general purpose mortars and overlay applications. Also, it is likely to be applicable to floors, bridge deck, surfacing and compounds for repairs, road of concrete structures. CHARATERISTICS * Increase the performance of bonding agent for old and new concrete. * Improving tensile and flexural properties of repair mortar. * Reduces water penetration and shrinkage. * Repair damaged, sprawled concrete and filling of cracks. * Better abrasion resistance and chemical resistance of cement screeds. * Suitable for waterproofing and laying floor screeds. * Strength to adhere concrete, masonry surfaces. APPLICATION PROCEDURE * Substrate should be cleaned and free of dust. Use wire brush to remove loose material. * Clean surface with water to remove loose particles and dust before primer application. PRIMER COAT Apply directly or mix cement and Rockflex-BRH in the ratio of 2:1. Apply as a slurry coat before placing polymer modified primer application.
Description CP-201 is a three-component material. With organic and inorganic complex, it can provide a solid, and thermal shock resistant floor. It is solvent free and is a â??Green Productâ??. The finish is easy to clean, water-resistant, abrasion- resistant and good impact- resistant. With binary complex bond, it can resist the growth of moulds. Feature solvent-free, friendly to human. compression and impact resistant. chemical resistant as its special structure. suitable for critical area (0~80). suitable for food factory, freezer, medicine plant, chemical plant, laboratory..etc
DESCRIPTION AFTEK PU 25 is a one component polyurethane based elastomeric sealant which cures under the effect of atmospheric humidity to form a tough and flexible seal joint with excellent movement performance. AFTEK PU25 performs excellent adhesion on most building materials with proven weather resistance against UV, Ozone etc. APPLICATIONS Precast façade unit sealing Light weight cladding panel Construction expansion joint Window, door flame perimeter joint Natural stone joint sealing Ceramic joint sealing Various building material joint sealing, ie. fiber glass, rigid plastic, etc FEATURES One component, ready to use High movement accommodation +/- 25% Can be over paint Non toxic, sag, staining One component ready to use Excellent weather resistance Prime less for most substrates
Allow you to mount small lights and accessories from walls, floors, doors, ceilings, windows, mirrors or any other smooth surfaces where no other mount can work! Available material Nbr Hnbr Epdm Silicone Viton/fkm Neoprene(cr) Sbr Nr *available for rohs/reach compliant *for other specified materials, please ask for recommendation Tooling/production 100% custom molded Please send us drawings (prints) for tooling purpose. Please advise material requirements (astm callout) Initial samples will need to be approved prior mass production To be produced as per sample approval Isir, ppap level iii available Founded in 1973, techken industrial co., ltd. Is a taiwan-based professional manufacturer. Our 2 factory is located in thailand, there are occupies over 25, 000 square feet and more than 600 employees, including strong r&d team, qc, qa, and completed production lines. Also, we are ts16949 & nsf61 certified manufacturer specializing in kinds of rubber parts. We are committed to offer excellent product quality and competitive price to help our customerâ??s increase the competitiveness of enterprises!
Seals Gaskets, grommets, washers and various molded seals Available material Nbr Hnbr Epdm Silicone Viton/fkm Neoprene(cr) Sbr Nr *available for rohs/reach compliant *for other specified materials, please ask for recommendation *we have iso/ts16949:2009 and nsf61 certified. *our materials have ul/wrc/nsf/fda approved, and available for rohs/reach compliant. *main product: various rubber parts--seals, gaskets, grommets, o-rings, bushings, diaphrams, rubber bondle metal. ^tooling/production .100% custom molded .Please send us drawings (prints) for tooling purpose. .Please advise material requirements (astm callout) .Initial samples will need to be approved prior mass production .To be produced as per sample approval .Isir, ppap level iii available
The Hi-Viz safety vest is made of high quality fluorescent fabric and reflective tapes to secure the safety of the users during the work. Both the fabric and reflective tapes pass CE EN471 class II test. Suitable for outdoor work or general traffic control. Velcro on front. Fabric : 100% polyester, 120 gsm Fabric color : Fluorescent Lime Green, Fluorescent Yellow, Fluorescent Orange Tape: 2" PP reflective tape, Grey color Size: Small ~ XXXL Compliance : CE EN471 Class II
Description: MSQ-50 is a multi-functions silicone emulsion. Generally it applied as a water repellent for fiber, leather, paper, limestone, etc .Different to fluoride-chemical MSQ-50 matches the (Rohs & REACH) standard. Texture after water-repellent treatment had 80% efficiency (AATCC-22-52 test), and also have softened and silk felling. Benefits: 1. Excellent stable emulsion, after event dilute to 2% concentration. 2. Long time working solution, up to 24 hours. 3. Suitable to all kind of textile (Cotton, polyester, Nylon) 4. AATCC-22-52 test could match 80% efficiency after 30 circle standard wash. 5. Emulsions may be applied in low concentrations by spraying, dipping, brushing or wiping. Specification: MSQ-50A MSQ50-B Appearance --- Milk white Appearance --- Milk white Activity % --- 50 +/- 2 PH/25â?? --- 5.5 to 6.5 PH/25â?? --- 4.5 to 6.5 Operation procedure: 1. Standard concentration 1.5 to 3.5g MSQ-50A/100g H2O by weight. 2. For special texture, could be used higher dosage MSQ-50A 5g/100H2O. 3. Working solution (H2O : MSQ-50A : MSQ-50B be 96.7g : 3.0g : 0.3g) 4. Working solution could be used for 24hr under 35â?? Texture dry under 80 to 110â??, then curing on 120 to 180â?? x 2 to 10 min. Precaution: 1. MSQ-50B cannot be added to MSQ-50A directly. 2. If MSQ-50B is added to MSQ-50A, the solution will gel and evolutes Hydrogen gas. Storage condition: For 6 months under 25â??
Half length zip wigh double flap, 2 zipped main pockets with flaps, integrated, adjustable hood wigh peak, elastic cuffs, pre-shaped elbows, packed in itself- fits in one of its pockets. Each jkt with a clear PE bag, 30~35 pcs into an export carton.
1 napoleon pocket, inner zip for fleece jacket, adjustable cuffs and bottom hem, adjustable hood hidden in the collar, 2 bigh front pockets. Each in a clear PE bag, 15~20 pcs into an export carton.
Contoured fit, 2 hand pockets with water resistant zips, 1 chest pocket, 1 -handed adjustable hem, 2-way adjustable hood made of bonding fabric. Each in a clear PE bag, 15~20 pcs into an export carton.
Flexo plate This smp-sp plate is specially designed to print on substrate with a rough & uneven surface such as corrugated boards, solid boards & multi-wall paper bags. It offers superior performance to meet the demanding quality required in today's packing print industry. 3.94 mm (900*1, 300mm, 900*1, 800mm, 1, 067*1, 524mm, 1, 067*2, 032mm)
LCD Protection film Anti glare: specially designed anti-reflection coating and matte surface reduces 97% of reflection and glare anti scratch: unique anti-scratch surface and special polyester material comply with ASTM-D1044 international anti-scratch standard. high transmission rate: brightness and color presence of the LCD screen is presented by 99% easy assembly: directly adhere the product onto the screen of LCD 14.1": 287x215mm 15": 305x228 17": 338x270
Model No¡GM-188 UV Matt Varnish with specific molecular structure for paper coating industry. The performance of M-188 is equivalent to conventional UV varnishes, in some cases; the adhesion and scratch resistance are far more superior. Description M-188 is a UV Matt Varnish with specific molecular structure for paper coating industry. The performance of M-188 is equivalent to conventional UV varnishes, in some cases; the adhesion and scratch resistance are far more superior. Specification Appearance: Milky White Liquid Safety and Notes Storage: keep away from high temperature, high humidity and direct sun-light; keep tightly closed while storing. Product expiration: sealed, 12 months. Wear neoprene gloves and PVC chemical resistant suit and charcoal filtered mask to prevent direct contact and inhalation. If the skin is contaminated, wash with soap and water. If the slurry gets in the eyes, irrigate immediately with large amount of fresh distilled water or sterilize with 0.9% brine. Fire point: 102 (method: ASTM D92). Fire fighting material: foam or CO Package 20Kg plastic drum
The heating apply one-part adhesive and sealant for interior and exterior application,remain permanent flexibility and good weather properties. It is ideal for use sealing gaps of containers, automotives, buildings and various appliances.
Hardener for Epoxy: Reactive Polyamide Resin Denaturalized Polyamine Denaturalized Polyamine Additive Solvent-diluted Polyamide Resin
Coatings.
