Product Description : Off Grade Price of product ( USD price or FOB price) : FOB Keelung USD380/MT Product origin : Made In Taiwan Key Specifications/Special Features : Appearance light yellow / off white powder PTA content :96%PTA ,3% impurity, Moisture : 1% From pool extracted is from a good source and consistent quality, and thru large Drying & filter machines ? Harmonization System (HS) Code : 29173619 Minimum Order Size and Packgaing details : 1000kgs/1004kgs* 20 big bag /20 container
As for plastic raw material
Plastic chair molds.
Model no.: table stage for ic Made in taiwan, roc Anti-adhesion processing with tsk Spec Bw :clear Heat-resistant range :1000 celsius degree Key features Nano sic anti-sticking surface processing for semiconductor optoelectronic areas such as large panel sucker, semiconductor wafer vacuum sucker. There are many types of wear mechanisms including adhesive, abrasive, erosive, capitation, and fretting.In many cases wear can occur from a combination of these mechanisms.Understanding the factors that are causing wear to occur is very important to engineering the proper wear resistant coatings. Payment terms:da , tt , l/c
Model no.: tensky Made in taiwan, roc Key features This product complies with the eu rohs directive. The high-tech nano paint achieves energy conservation and environmental protection by converting heat into energy when it is applied to the mechanical cooling systems and fuel systems.
Given the growing graphite is widely applied in industry, lack of material there to shake chu chen, the division began To develop the graphite surface treatment to solve this problem, do vgi or sic for the graphite surface treatment Technology has further breakthroughs can be applied to semiconductors, optoelectronics other industries. Vgi is mainly used in surface treatment temperature below 600 degrees environment. Sic is mainly used in surface treatment temperature below 1300 degrees environments.
We provide the total solution of OEM project, including product design, plastic molding, injection, and parts assembly. The price is depend to the samples and plastic material.
Hot runner plastic mold, DME or Hasco mold. we could make the plastic mold with our client's design.
Engineering plastics: PA6, PA66, PBT, PC, PET, PP, PVC. We provide: 1. Low MOQ: 1 ton 2. R&D customized service 3. Negotiable price
Plastic sheets and plastic film Material: PP,EVA,PVC,PE,HIPS Application: for printing, Vacuum forming
A curing agent is a standard reactive polyamide intended for use in curing of epoxy resin .It is cut to 60 % solids by weight in xylene. When cured with high molecule weight of epoxy resin .it is provides cured films with such high orders desired at actual application field as good flexibility, simultaneously with good water resistance and good alkali resistance. Thus desired for heavy duty primer coatings application of anti corrosion resistance.
Flooring- a low viscosity, modified -aliphatic polyamines epoxy curing agent. It has been designed for use in solvent-less coatings and leveling floorings where excellent flow, good adhesion and high gloss films are required.
Description 1. Tough film and good adhesion on the concrete, able to penetrate into concrete. 2. Good resistance to water , brine and chemicals. Excellent mechanical strength and physical properties. 3. Good resistance to impact and abrasion. 4. Easy application , drying fast. Prepare to use 1. Mix base and hardener by the mixing ratio and Stir thoroughly, then setting at least 15 minutes. Thinner may be used to reduce viscosity. 2. Remove all foreign particles, oils, grease , rust and moistures from the surface before application. 3. Two packs product, must be used completely during the duration of its pot life. 4. Donâ??t apply when the temperature is < 10â??,>40â??, relative humidity is >90â?? or the surface temperature of substrate is not higher than the dew point for at least 3â??. 5. If the coating interval is exceeded , the surface of base coat must be roughened to insure adhesion. 6. Keep away from heat, sparks and flame. 7. Stored with good ventilation. 8. Keep adequate ventilation during application. 9. The actual coverage may vary, depending on application technique, job conditions and type of surface. Under brushing & rolling application the actual coverage is estimated at 70% of the Theoretical coverage and 60% for spraying. **The parts of data base above could be affect by application condition at job site, please reference guide specification or contact with relative technical personnel. Color : Clear Drying time : Tack-free : 2 hours Hardness : 8 hours Full cure : 7 days (grease)
DESCRIPTION CC-604SP is two component water based epoxy primer, composed from water based of liquid epoxy resin and hardener. APPLICATION 1. To prime the surface and help the following application procedure to mold and decorative coating. 2. Highly resist to chemicals in non-circulated places. 3. With well adhesion ability with epoxy system or PU system application. 4. Suitable for hospital, operation room, food factory to prevent the mold, dust and bacterium. CHARATERISTIC 1. Able to be diluted by water. 2. Anti- efflorescence , suitable for the environment with highly hygienic request. 3. Good adhesion to the moisture surface, can take as the primer for solvent-free or solvent-based epoxy resin.
CS-613W is 2-component water-based premium epoxy product. CS-613W as admixtures can improve the properties, particularly in relation to water absorption reduction, toughness enhancement, vibration damping and increase of the bond strength of cement to reinforcements other than being used as admixtures, CS-613W is used partial replacement of fine aggregate, for coating, sealing and repairing concrete and for coating steel reinforcing bars for corrosion protection. AREA OF APPLICATIONS Repair mortar for concrete areas. Industrial flooring. Bonding agent for new to old concrete. As water based primer. Can be applied with damp surface. FEATURE Weatherproof and waterproof of capabilities that help prevent the deterioration of the ground-coat material. Low odor. Washable with water including tools. Best to wash as soon as possible before it hardens.100% water resistant when cured.
CA-010P as a water-based primer in relation to water absorption reduction and increase the bonding strength of cement to reinforcements other than being used as admixtures increase the mechanical properties and the adhesion of the hardened material. AREA OF APPLICATIONS Repair mortar for concrete areas Industrial flooring Bonding agent for new to old concrete Enhance adhesion strength of mortar
DESCRIPTION Bituminous Primer is product containing oxidized bitumen and a mix of technical quick drying solvents. APPLICATION Bituminous Primer is recommended to block the dust and the porosity of concrete surfaces allowing the quick application o f the bituminous polymer membranes, both with flame application and cold bonding with bituminous sealants or with self adhesive membranes.Bituminous Primer allows quick film drying, has an excellent penetration and adhesion to the support for the absence of surface stickiness. INSTRUCTIONS FOR USE Concrete surfaces must be dry, clean and free from oil, dust or release agents. This type of primer is ready for use after mixing it. Bituminous Primer can be either sprayed or applied by means of roller or brush. In case of hot application of membranes with flame, the primer can be used only if surfaces are completely dry. On the contrary, if the surface is damp, it is recommended to use a bituminous primer specific for damp surfaces. The drying time depends on concrete porosity, on the quantity of product applied and on the temperature of both the surface and the environment. Usually the film gets dry after 2-4 hours from the application. The drying time can increase in case of cold temperature and with low a bsorption surfaces. PACKING 5 gallon Bucket SHELF LIFE The product can be stocked in closed buckets and in dry area, far from UV rays for 12 months. TOOL CLEANING After use clean tools with common solvents.
DESCRIPTION CC-600SP is a two component, solvent-free epoxy system with high chemical resistance and high bond strength. The epoxy may be applied as a primer for most high end industrial coatings, like Epoxies, PU. CHARATERISTIC Easy apply Low odor High bond strength Abrasion resistant Chemical resistant APPLICATION Concrete coating Cement
Acrylic mirror sheet, acrylic sheet, plastic mirror sheet, plastic mirror sheet , plastic sheet, hard coated sheet, anti static sheet, anti stain sheet, anti scratch sheet, plastic sheet, pc sheet and pc mirror sheet..
Features: The recycle plant designed for reproducing general kind of waste products such as: waste pp/hdpe films, flat yarns, woven bags, woven sheets, bad quality products and so on. The production out is 80 kg/h-260 kg/h.
