DESCRIPTION CA-055(W12) is an emulsion primer of water-based acrylic resin with excellent properties such as water resistance, pull-off strength and pore-filling ability etc. , especially used to improve the physical properties of cement. It can be mixed with water at any ratio. FEATURES *Excellent penetration into the concrete substrate to increase pore-filling ability and adhesion. *Reduced transport paths of concrete structure to enhance durability. *Excellent water resistance. AREA OF APPLICATIONS *Repair mortar for concrete areas. *Industrial flooring. *Bonding agent for new to old concrete. *As cement grout additive. *As water-based primer. *For making two component tile adhesives. *As adhesion aid for skim coat materials. PACKAGING 20kg Plastic Pails FLAMMABILITY Being water-base, it is non-flammable. CLEAN UP Tools and equipment can be easily cleaned up with cloth before drying.
DESCRIPTION CP-320 is a fast-curing, two-component, bitumen-extended polyurethane fluid. It produces a highly elastic membrane with strong adhesion to many types of surfaces and excellent mechanical and chemical resistance properties. FEATURE Components easily mixed, fast curing Its low modulus gives it excellent substrate crack-bridging properties Excellent adhesion on almost any surface Excellent thermal resistance, max service temperature 80 Resistance in the cold: Film remains elastic even down to -40 Good chemical resistance Can also be used as a joint sealant APPLICATIONS Bathrooms, balconies, basements and rooftop Gypsum and cement boards Light roofing made of metal or fibrous cement Non-potable water tanks Bridge platforms Cut-and-cover tunnels Irrigation channels PACKAGING A : 20LT B : 20LT
DESCRIPTION Is a cement based waterproofing slurry which contains a high quality polymer and selected filler such as silica sand and other additives. When it dry will provide a hard and abrasion resistant waterproofing layer which can be tiled over sucessfully. USES IN APPLICATIONS * Is suitable to make a protection waterproofing layer on * Bathroom, Kitchen & Laundry Area * Balconies & Terraces * Water Tank / Water Reservoir * External Wall FEATURE & BENEFIT It can be used as underlayment to prevent water seepage from the ground before laying marble, granite, natural stone, timber floor, carpet and vinyl. DAMPSCOAT SL is compatible with concrete and any mixture of cement-sand rendering or plastering. After dry, it can be painted over with any water or solvent based paint.
IT-6600 is an easy-touse water repellent, using silane grafting (or coupling) technique to form water-crosslinked property. It is a non-solvent based resin that penetrates into the substrate heightening its waterproofing ability. Use as a protective coating on porous, water-resorbing surface like ceramics, bricks, tiles, timbers...etc. To prevent powdering, weathering effect on concrete walls Surface waterproofing and leak-prevention apply on internal/ external walls, stones, tile surfaces. Excellent weatherability and waterproofing properties, due to silane grafting (or coupling). High permeability because of the semi water soluble, small diameter of the particles. Ideal to apply on non-organic, porous substrates due to the excellent water-tight property.
CA-010P as a water-based primer in relation to water absorption reduction and increase the bonding strength of cement to reinforcements other than being used as admixtures increase the mechanical properties and the adhesion of the hardened material. AREA OF APPLICATIONS Repair mortar for concrete areas Industrial flooring Bonding agent for new to old concrete Enhance adhesion strength of mortar
DESCRIPTION CC-600SP is a two component, solvent-free epoxy system with high chemical resistance and high bond strength. The epoxy may be applied as a primer for most high end industrial coatings, like Epoxies, PU. CHARATERISTIC Easy apply Low odor High bond strength Abrasion resistant Chemical resistant APPLICATION Concrete coating Cement
CA-107W is a water-based dispersion of SBR polymer, especially used to improve the physical properties of cement. It is formulated to increase the adhesion, durability and compressive strength of normal mortar. 1.Bonding of fresh mortar to old concrete. 2.Increase adhesion of vertical marbles,tiles. 3.Improve water-resistance when added to tile grouts. 4.Reduce shrinkage cracks. 5.Improve workability and abrasion resistance of screed. 6.Can be mixed with dry-packed,factory-blend mortar.
Feature: Reinforcement of Waterproof High heat insulation Good quality and dust resistance Water resistance and high weather durable. Drying faster and easy application. Application Cement wall Galvanized steel Color pre-painted steel Plywood Plastic wave-board Lime-wall The coverage will be affected by substrate dimension and application method. The loss factor as follow - Brush= Theory coverage X1.4 Spray= Theory coverage X1.7
DESCRIPTION CC-601SP is a two component, Epoxy system with High Chemical Resistance and High Bond Strength. The epoxy may be applied as a primer for most High End Industrial coatings, like Epoxies, PU. CHARATERISTIC * Easy apply * Low odor * High bond strength * Abrasion resistant * Chemical resistant APPLICATION * Concrete coating * Cement
DESCRIPTION STARCOAT PL, is fine grade cement based finish plastering skimcoat which contains selected filler and additive used for smooth finishing to uneven wall cement based plaster and ceiling. After dry STARCOAT PL have a good adhesion to the substrate, no cracks, smooth, no dust on the surface and ready to be painted with water based paint. Easy to use, good workability and have a long pot life and correction time even at the outdoor applications. USES IN APPLICATIONS *Cement Based Wall Plaster. *Precast Concrete. *Concrete Profile & Concrete Ceilings *Internal & External. ADVANTAGE *Light, good workability and sanding properties. *No cracks and hair cracks. (depends on background) *Smooth surface, solid and no powdery. *Can be painted or finished with wallpaper directly after dry in minimum 24 hours without using PVA putty to leveling up & filling uneven rough surface. PRODUCT SPESIFICATIONS 1. Main Binder : Portland Cement & Polymer 2. Filler: Limestone 3. Color: GREY and WHITE. 4. Mixing Ratio : 7 - 8 litres of water per 25 Kg bags. or 28 - 32 % water demands. 5. Coverage: 1.25-1.3 Kg/m2/mm or 19m2/25 Kg/mm thickness average 7.5m2/25Kg for 2-3mm thickness 6. Thickness: 2mm thickness/coat 4mm for 2 coats and 6mm for 3 coats. 7. Pot Life: approx. 60 minutes SURFACE PREPARATION 1. The substrate must be clean and free from grease and loose particles. Recesses should be pre-patched and levelled where appropriate. 2. Porous and absorbent substrates must be pre-wetted prior to application of Starcoat PL finish coat.
DESCRIPTION HYPERCOAT-688 is the range of high performance, seamless, cold-applied liquid waterproofing membrane. CHARATERISTIC 1. Quick and easy to apply. Single pack, liquid applied waterproofing membrane. 2. Excellent hydrolysis resistance 3. Still can curing when apply on the moisture surface without observed water. 4. The middle layer of the tile, the top coating or each cement-based finished surface. APPLICATION 1. Indoor: Bathroom, kitchen & terrace 2. Outdoor : Roof, floor joint, parapet and wall.
DEACRIPTION Rockflex-BRH is a specially modified styrene butadiene rubber emulsion with widely applicable for use in repair and general purpose mortars and overlay applications. Also, it is likely to be applicable to floors, bridge deck, surfacing and compounds for repairs, road of concrete structures. CHARATERISTICS * Increase the performance of bonding agent for old and new concrete. * Improving tensile and flexural properties of repair mortar. * Reduces water penetration and shrinkage. * Repair damaged, sprawled concrete and filling of cracks. * Better abrasion resistance and chemical resistance of cement screeds. * Suitable for waterproofing and laying floor screeds. * Strength to adhere concrete, masonry surfaces. APPLICATION PROCEDURE * Substrate should be cleaned and free of dust. Use wire brush to remove loose material. * Clean surface with water to remove loose particles and dust before primer application. PRIMER COAT Apply directly or mix cement and Rockflex-BRH in the ratio of 2:1. Apply as a slurry coat before placing polymer modified primer application.
Description CC-020 is a new type cement based compound coating with various texture of finishes and shades. By apply with different tools and methods, it can provide either natural or rough texture, depending on the requirements. Use & Feature 1. Suitable for interior and exterior decorative applications. 2. An economical alternative to textured elastomeric coatings. 3. High water-resistance with handy-usability. 4. The built-in texture helps to disguise rough and irregular surfaces. 5. Can be used as primer with water-diluted CC-020. Tool Spray guns, trowels, spatulas, pattern-rollers
Description HY-330 contains specific high content of polymer resin, and can use with difference size of quartz sand to lay out sand texture. It is non-toxic, eco-friendly, and can be applied on both interior and exterior wall, help enriching the monotonous surface. Use 1.Interior and exterior wall decoration. 2.Enhance the finish surface by texturizing molding. 3.Other decoration usage. Feature 1.Water-based, eco-friendly, and non-toxic. 2.Tough, durable, with good weather resistance. 3.Can prevent surface chalking of cement. Series Product HY-360/ Stone Plate Texture Coating
DESCRIPTION a premium cement based finish skimcoat which contains selected filler, additive and polymer used for smooth finishing to uneven concrete wall & ceiling. After dry STARCOAT CN have a excellent adhesion to the substrate, better impact resistant, no powdery, no cracks, smooth and ready to be painted with water based wall paint. Easy to use, good workability and have a long pot life and correction time even at the outdoor applications. USES IN APPLICATIONS 1. Cement Based Wall Plaster. 2. Concrete Wall, Column & Ceiling 3. Precast Concrete & Concrete profile 4. Internal & External. ADVANTAGE * Light, good workability and sanding properties. * No cracks and hair cracks. (depends on background) * Smooth surface, solid and no powdery. * Can be painted or finished with wallpaper directly after dry in minimum 24 hours * without using PVA putty to leveling up & filling uneven rough surface. PRODUCT SPESIFICATIONS 1. Main Binder : Portland Cement & Polymer 2. Filler : Limestone 3. Color : GREY and WHITE. 4. Mixing Ratio : 7 - 8 litres of water per 25 Kg bags. or 28 - 32 % water demands. 5. Coverage : 1.25-1.3 Kg/m2/mm or 19m2/25 Kg/mm thickness average 7.5m2/25Kg for 2-3mm thickness 6. Thickness : 2mm thickness/coat 4mm for 2 coats and 6mm for 3 coats. 7. Pot Life : approx. 60 minutes SURFACE PREPARATION * The substrate must be clean and free from grease and loose particles. Recesses should be pre-patched and levelled where appropriate. * Porous and absorbent substrates must be pre-wetted prior to application of Starcoat CN finish coat.
CS-613W is 2-component water-based premium epoxy product. CS-613W as admixtures can improve the properties, particularly in relation to water absorption reduction, toughness enhancement, vibration damping and increase of the bond strength of cement to reinforcements other than being used as admixtures, CS-613W is used partial replacement of fine aggregate, for coating, sealing and repairing concrete and for coating steel reinforcing bars for corrosion protection. AREA OF APPLICATIONS Repair mortar for concrete areas. Industrial flooring. Bonding agent for new to old concrete. As water based primer. Can be applied with damp surface. FEATURE Weatherproof and waterproof of capabilities that help prevent the deterioration of the ground-coat material. Low odor. Washable with water including tools. Best to wash as soon as possible before it hardens.100% water resistant when cured.
Description HYPERCOAT-568 is a single-component,high-strength water-based waterproof coating composed of modified copolymer, which has both waterproof and thermal insulation effects, and has good water resistance and weather resistance. Use â?¢ Bathroom, Balcony, Terrace â?¢ Roof (flat/sloping) â?¢ Floor seams, parapet â?¢ Suitable for old and new waterproof engineering made of acrylic or PU material. Feature â?¢ Can be used immediately after opening the bucket,easy to use, suitable for DIY users. â?¢ Good adhesion to cement. â?¢ Can be directly tiled or exposed directly after drying. â?¢ Good water and UV resistance, forming excellent weatherability. â?¢ After completely curing, the water-proof layer of the roof is walkable. â?¢ Can effectively block heat transmission. â?¢ Waterproof repair for new and old metal iron roofs.
DESCRIPTION Hydrostatic press stone filmless maintenance agent is a maintenance hybrid comprised of a special kind of Oligomer Silsesquiloxane mixed in a water-based solution, formulated with powerful surfactants attributing to its excellent-resistance properties and a non-yellowing methyl silane hybrid, which reacts with the moisture and CO2 in the air, forming a nonsolvent based resin that penetrates into the substrate heightening its water proofing ability. Its ability to penetrate deep into the concrete, as deep as 3~5m/m, distinguishes it from other products on the market. Moreover, it can cause a chemical reaction with alkaline materials that produces crystals inside the concrete, that can fill and block the micro-vein within the concrete so as to reach the waterproof effect in depth; thus, the longevity of the building can be extended. APPLICATION Water, anti-pollutants and anti-weathering resistance for various surfaces such as: tiles, gaps between tiles, terra cotta, calcium silicate board , plasterboard ,bricks,concrete, natural and process stone, stone carving, stone washing, stone smoothening, stone cutting,sidewalks, parking plywood. ADVANTAGES * Highly active molecule that is eco-friendly, water-based and inorganic produces strong adhesive to the substrate after chemical cross-linking. * High permeability and excellent durability. * Non-yellowing, no stain contaminated, dirt can be easily washed off with water from rain or washing walls. * Excellent water repellent ability (the so-called Lotus effect) can effectively prevent from water permeating. * It is suggested to apply new coat regularly every three years; thus it can continue to maintain water-repellent and anti-pollutant functions.
Description CS-613FD is a water-based multi-purposed epoxy putty and adhesive. It is developed for filling seam, gap between Calcium Silicate board. It is environmentally friendly which does not pose health hazard to user and dwellers. The best part is how easy it can be cleaned with just water. It is easy to mix even by hand due to our innovative water-based technology. Features Paintable easily with wb coating Easy to use Smooth to tool with trowel Non-sagging Stronger adhesion High solid by volume; 100% water resistant when cured. Low odor VOC free / Solvent free Uses Gypsum boardCalcium silicate board Fiber cement board Plywood / Timber Concrete / Tile It may be suitable to use on other substrates not mentioned above. Application 1. The surface to be adhered must be free of dust, release agent, oil and grease 2. Mix part A and part B with 1: 1 (by volume), and stir until homogeneous as indicated by uniform color. 3. Do not stir or mix the two parts on the application surface.
CC-402 is a one component, plasto-elastic coating based on UV-curing acrylic dispersion with excellent crack-bridging properties even at temperatures below 0°C. CC-402 complies with the requirements of EN 1504-2 as protective coating. CC-402 is used for protection and enhancement of concrete structures (normal and lightweight concrete),especially exposed outdoor concrete surfaces with a risk of cracking CC-402 is used with concrete repair works as an elastic protective coating on AFTEK smoothing mortar (refer to product / system data sheet), fiber cement and over coating of existing soundly adhering coatings. Suitable for protection against ingress (Principle 1, method 1.3 of EN 1504-9) Suitable for moisture control (Principle 2, method 2.3 of EN 1504-9) Suitable for increasing the resistivity (Principle 8, method 8.3 of EN 1504-9) Crack-bridging even at low temperatures (-5°C) High diffusion resistance against CO2 reducing the rate of carbonation Water vapour permeable Very good resistance against weathering and ageing Environmentally friendly (solvent free) .Reduced tendency to dirt pick up and contamination.
