CNC machining parts, investment casting parts, die casting parts, powder metal parts, sheet metal stamping parts, plastic injection parts, rubber gasket, and o ring parts, solenoid coil parts.
Plastic raw material, synthetic rubber, elastomer,PP, LLDPE, LDPE, EVA, PS, PE powder, PE wax, synthetic rubber, EPDM, SBR, BR, NBR, SEBS, SBS, SIS, POE, OPP film.
Investment casting plus CNC machining parts are customized per customers's print and specifications.
We specialize in CNC machining processes per customers' print and specifications. All parts are on OEM basis.
Features * With excellent adhesion, non-sagging and construction resistance. * Without cracking and bulging after curing. * Specific design for spray plastering. * Applying by spraying machines efficiently. * Suitable for tiling. * Interior wall, exterior wall, panel wall and small area ceiling rendering. Application 1. Substrate must be free from grease, mould oil, rust, rusty metal , wood peels, paints, plastics, loose particles, contamination on any traces of foreign materials affecting the adhesion of CS-010. 2. Moisten the substrate overnight and also at the time before the commencement of operation. 3. Suggest to use CC-400 Concrete Bond as primer to adding adhesion for smooth and low porous substrates. 4. CS-010 is suitable for any type of spraying machine. Mix a packet of 40KG powder with 6.4liter of water and stir well for use. Its thickness should be maintained at 15mm and wait for 6-24 hours to apply for increasing the thickness. Storage Storage life is 12 months if the product is kept in a dry place. Package 40kg/powder bag
Description CC-100M is a waterproofing additive for concrete, mortar and cementitious grout. Use Beams, foundations, masonry laying, floor and wall cladding mortars, plasters, slabs, slope walls, buried structures (water tanks, reservoirs and pools), waterproofed, reinforced and reinforced concrete, etc. Technical Data and Property Ambient temp.: 25, 50±5% R.H. Packaging : 20kg /pail Appearance : Grayish white powder Odor : Odorless pH : 12 ~ 13 Relative Density : 1.9 ~ 2.1 g/cm3 Absolute Specific Mass : 2.2 ~ 2.7 g/cm3 Flammability : Non-flammable Solid Solubility : insoluble **Results have been obtained from tests performed under standard conditions and may vary depending on application conditions.
IT-6600 is an easy-touse water repellent, using silane grafting (or coupling) technique to form water-crosslinked property. It is a non-solvent based resin that penetrates into the substrate heightening its waterproofing ability. Use as a protective coating on porous, water-resorbing surface like ceramics, bricks, tiles, timbers...etc. To prevent powdering, weathering effect on concrete walls Surface waterproofing and leak-prevention apply on internal/ external walls, stones, tile surfaces. Excellent weatherability and waterproofing properties, due to silane grafting (or coupling). High permeability because of the semi water soluble, small diameter of the particles. Ideal to apply on non-organic, porous substrates due to the excellent water-tight property.
DESCRIPTION CC-103(2K) Crystalline Waterproofing Materials is a capillary waterproofing formulation. CC-103(2K) has high permeability which crystallize and penetrate deeply into the capillaries of the concrete. ADVANTAGES * Applied to wet surface * Transparent, non-toxic and odorless * High cohesion and effective against positive/negative water pressure well APPLICATION * The leakage of inner wall in basements or the protection against positive/negative water pressure * Prevent seepage and leakage in underground passages and tunnels * Avoid the leakage of cisterns and pools PACKING 30KG/Set A: 22.5KG in powder.+ B: 7.5KG additive. COLOR Grey and white. STORAGE 6 months in original container stored in dry conditions and under 25°C.
DESCRIPTION CC-604 is two components of water based surface paint, composed from water based of liquid epoxy resin and hardener and special pigment. APPLICATION 1. Waterproof of concrete wall, resist to mold and decorative coating. 2. Highly resist to chemicals in non-circulated places. 3. Suitable for hospital, operation room, food factory to prevent the mold, dust and bacterium. CHARATERISTIC 1. It is water based paint, and dilute by water, but its films strong after hard is not less than solvent based epoxy resin. 2. With good light resist quality, uneasy to become powder or change color, suitable for the environment with highly hygienic request. 3. Good to resist the radiation, can be used for the concrete wall and floor in the nuclear power factory. 4. Good adhesion to the moisture floor, can take as the primer for non-solvent or solvent based epoxy resin.
Description Wallpaper adhesive is a high quality, easy to mix adhesive. It is easily spread with excellent slip properties for accurate positioning and longlasting results. Suitable for hanging all wallpaper types. Features â?? This product is made of natural cassava flour after gelatinization and modification, and added with water resistance additives. It has high adhesiveness and is not easy to hydrolyze after film formation. â?? It can be used in cold water. Its characteristic of dispersing first and then dissolving makes it difficult to form fish eye colloid under a large amount of powder. â?? Non-toxic, tasteless, easy to clean. â?? During use, the amount of water can be increased or decreased according to the characteristics of the material to control the adhesion. Application 1. Wallpaper adhesive. 2. Poster. Stamp adhesive. Precautions 1. If bubbles are generated during the mixing process, they must wait for the bubbles to disappear before they can be used on the material 2. The mixed colloid cannot be stored for too long, it is recommended to use it up within 3 days 3.If the colloid that has been stored for too long has a peculiar smell, there will be black hair and yellow on the side of the barrel or the surface of the colloid. It cannot be used and needs to be re-modulated Package 5kg/barrel (20L barrel. Plastic bag inside) 35kg/barrel (big blue barrel, lined with plastic bag)
DESCRIPTION CC-103(1K) Crystalline Waterproofing Materials is fusion resin powders which contains water-soluble crystalline mineral coating with special additive syntheses. It will have a protective coating which is firm and impact resistance after curing. CC-103(1K) is a high technology product to prevent water leakage. ADVANTAGES * Prevent the constructions aging phenomenon * Avoid the leakage and mold on the wall * Effective against negative water pressure * With good stability * Non-Toxic APPLICATION * Internal and external walls * The leakage of inner wall in basements or the protection against negative water pressure * The construction of base isolated structures * Reservoir; drinking water pool * Contaminated water pool; water storage tank PROCEDURE 1. Ensure all surfaces which CC-103(1K) will be applied are clear. 2. Mix one pail(22.5KG) of CC-103(1K) and 4.5~5.0Liter water well by construction mixer. 3. Wait for 3-5 minutes and stir before use; use finishing trowel to smoothing or apply evenly with a nap roller. 4. Use finishing trowel to smoothing after using spray machine. PACKING 22.5KG per pail. STORAGE 6 months in original container stored in dry conditions. LIMITATION The crystalline products need to be used between 4 °C ~ 32 °C when applied.
Silicon Powder.
Mung beans, butter, fishmeal, hemoglobin powder.
Spices, natural resource, and fmcg products and instant spices (ready to eat powder) and denim jeans.Manufacture, export and door to door
Specification : 1. Ash content around 3% 2. Moisture content around 8% 3. Fat content is around 16.71% 4. Crude fiber content is around 10.55% 5. Protein content is around 15.42%
Oil, butyl rubber bk 1675, bromo butyl rubber bbk 239, carbon black (n220, n330, n339, n550 & n660), di ethylene glycol (deg) , dea, epdm, iso butanol, meg, mea, methanol, n butanol, nbr, paraffin wax, pbr nd & skd ef, sbr 1500, sbr 1502 & sbr 1712, sulfur powder & sulphur, teg, tea, ferric chloride, calcium chloride, magnesium chloride, ammonium chloride, bleaching powder (commercial grade), bleaching powder (industrial grade), sodium hypochlorite, liquid chlorine, caustic soda (50% liquid), caustic soda (solid), caustic soda (flakes), nickel chloride, hydrated lime.
