Description CP-358 Multi-purposes Paint is based on specific polymer resin and a variety of materials with water resistance ,abrasion resistance, weather resistance characters. This refined dry fast paint can be used in cement ,metal ,wood ,asphalt surface to meet your particular requirement and very economy. Owing to excellent materials , strict QC and production process , Carmine Paint can offer the advantages of time- saving , easy usage . Application * used in multi-kind materials, such as metal, wood, cement and asphalt. * Indoor, outdoor paint. * Line Marking. Characteristics Durable hard and tough film. Excellent adhesion. Excellent abrasion and corrosion resistance. Package 25KG / Iron durm Color : white / yellow / red / green Cover ability : 8 ~ 10 m�²
Description CC-610N is a 2k topcoat which cured by non-yellowing isocyanate. Feature â?¦ Solvent-free, friendly to human. â?¦ Compression and impact resistant. â?¦ Chemical resistant as its special structure. â?¦ Suitable for critical area (0~80â??). â?¦ Suitable for food factory, freezer, medicine plant, chemical plant, laboratory..etc Usage Used as a topcoat on surface of concrete and metal, bridges and steel structures. Package 5 gal per set
CP-358 Multi-purposes Paint is based on specific polymer resin and a variety of materials with water resistance ,abrasion resistance, weather resistance characters. This refined dry fast paint can be used in cement ,metal ,wood ,asphalt surface to meet your particular requirement and very economy. Owing to excellent materials , strict QC and production process , Carmine Paint can offer the advantages of time- saving , easy usage . * Durable hard and tough film. * Excellent adhesion. * Excellent abrasion and corrosion resistance. * used in multi-kind materials, such as metal, wood, cement and asphalt. * Indoor, outdoor paint. * Line Marking.
Description CC-020 is a new type cement based compound coating with various texture of finishes and shades. By apply with different tools and methods, it can provide either natural or rough texture, depending on the requirements. Use & Feature 1. Suitable for interior and exterior decorative applications. 2. An economical alternative to textured elastomeric coatings. 3. High water-resistance with handy-usability. 4. The built-in texture helps to disguise rough and irregular surfaces. 5. Can be used as primer with water-diluted CC-020. Tool Spray guns, trowels, spatulas, pattern-rollers
Code 17210: Reduced thickness for maximum sensitivity suitable for microsurgery operations Features 1. Triple-layer design consists of double-dipping latex technology and polymer coating. 2. Made by natural rubber latex with low protein content. 3. Excellent hand-fitting made by perfect Color: Brown Hand former: Anatomic shape, non-beaded cuff, textured surface in the grip area, with size embossed Sterility: Sterile Size 6.0, 6.5, 7.0, 7.5, 8.0, 8.5 Overall length: 310 +/- 5mm
Code 18210: Increased thickness for maximum protection suitable for orthopedic surgeries Features 1. Triple-layer design consists of double-dipping latex technology and polymer coating. 2. Made by natural rubber latex with low protein content. 3. Excellent hand-fitting made by perfect Color: Brown Hand former: Anatomic shape, non-beaded cuff, textured surface in the grip area, with size embossed Sterility: Sterile or non-sterile Sizeï¼? 6.0, 6.5, 7.0, 7.5, 8.0, 8.5 Overall length: 310 +/- 5mm
Code 16150: Improved treatment to allow wet hands to slip in easily. Features 1. Triple-layered design consists of double-dipping latex technology and polymer coating. 2. Made by natural rubber latex with low protein content. 3. Excellent hand-fitting made by perfection Color: Natural latex Hand former: Anatomic shape, beaded/non-beaded cuff, textured surface in the grip area, with size embossed Sterility: Sterile Size 6.0, 6.5, 7.0, 7.5, 8.0, 8.5 Overall length: 290 +/- 5mm / or 310+/-5mm
Model no.: ceramic coating, esd coating Made in taiwan, roc Painless surface treatments with tsk Key features We produce ceramic coating parts to any kind of materials. The base of materials such as : al2o3 , sic , zro2 , al , stainless...Ceramic and metal parts. What we can coating for: al2o3 , sic , zro2, ptfe , y2o3 , sio2 , dcf series and others materials... Why need to coating? for insolution , esd and plasma, grinding , high temperature , acid resisting , alkali resisting , cost down...And others... Payment terms: d/a , t/t , l/c
Strict quality control starts from the beginning with processing of first-class raw materials by adopting advanced facilities to make quality products. We serve our industrial customers directly, provide not only professional technical support but also cost-effectively products and services
Strict quality control starts from the beginning with processing of first-class raw materials by adopting advanced facilities to make quality products. We serve our industrial customers directly, provide not only professional technical support but also cost-effectively products and services
Code 85300: Made of polyethylene with acrylic coating. Features Made of polyethylene with acrylic coating. Hypoallergenic adhesive, leaves little or no residue. Porous and breathable. Perforated for easy tearing by hand. Thin, flexible and strong adhesive Material: Polyethylene Size: 1.25 cm x 9.14 M (1/2''x10yds) 2.50 cm x 9.14 M (1''x10yds) 5.00 cm x 9.14 M (2''x10yds) 7.50 cm x 9.14 M (3''x10yds)
Code 52110: For surgical wound drainage Features Nature rubber formation. Non-sterile. Smooth tubing wall, both outside & inside. X-ray opaque, ready to implant. Peel apart package. Length : 18(12 is also available) Diameter: 1/4, 3/8, 1/2, 5/8, 3/4, 1
Code 12300: Long cuff with 480+/-10mm or 400+/-5mm Features 1. Made by selected natural rubber latex. 2. Low protein content less than 50.µg/g. 3. Excellent chemical-resistance compounded by special treatment. 4. Excellent hand-fitting made by per Hand former: Long cuff, anatomic shape, beaded cuff, textured surface in the grip area. Size: 6.5 (Small), 7.5 (Medium), 8.5 (Large) Overall length: 480 +/- 10mm or 400 +/- 5mm
Code 21630: Suitable for bacteria-free operations in general surgical rooms, surgical wards, laboratory, cleanroom. Features: 1. Made from selected natural rubber latex. 2. No sensitization response conducted in conformance with ISO 13485 Quality Standards. Color: Natural latex Hand former: micro rough surface in the grip area, with size embossed Sterility: Sterile or non-sterile Size S, M, L Overall length: 245 +/- 5 mm
Code 11300: Long cuff with 480+/-10mm or 400+/-5mm Features 1. Made from natural rubber latex. 2. No sensitization response conducted in conformance with ISO 13485 quality standards. 3. Excellent hand-fitting. 4. Safe grip finish with texture Hand former: Long cuff, anatomic shape, beaded cuff, textured surface in the grip area. Size: 6.5 (Small), 7.5 (Medium), 8.5 (Large) Overall length: 480 +/- 10mm or 400 +/- 5mm
Code 11150: Excellent hand-fitting Features 1. Made by natural rubber latex. 2. Safe grip with textured surface, easy donning and comfort. 3. No sensitization response conducted in conformance with ISO 13485 quality standard. Hand former: anatomic shape, beaded cuff, textured surface in the grip area, with size embossed Sterility: Sterile Size: 6.0, 6.5, 7.0, 7.5, 8.0, 8.5 Overall length: 290 +/- 5mm / or 305+/-5mm
Code 13150: Excellent hand fitting Features 1. Made by natural rubber latex. 2. Excellent hand-fitting. 3. Safe grip with textured surface, easy donning and comfort. 4. No sensitization response conducted in conformance with ISO 13 Hand former: anatomic shape, beaded cuff, textured surface in the grip area, with size embossed Sterility: Sterile Size: 6.0, 6.5, 7.0, 7.5, 8.0, 8.5 Overall length: 290 +/- 5mm
Suitable for hairdressing, tattooing and industrial use Features Made by natural rubber latex. Excellent hand-fitting. Safe grip with textured surface, easy donning and comfort. Color: Black Hand former: Ambidextrous shape, beaded cuff, textured surface in the grip area Sterility: Non-sterile Size: S, M, L, XL Overall Length: 245 +/- 5mm
Code 72630: Suitable for bacteria-free operations in general surgical rooms, surgical wards, laboratory, cleanroom. Features 1. Contains no natural rubber latex protein. 2. Hypo-allergenic compounds for the most sensitive hands. 3. Excellent puncture resistance. 4. Minimize hand pressure & keeping cooler, drier Color: Blue or white Hand former: Textured surface in the grip area, with size embossed Sterility: Sterile or non-sterile Size S, M, L, XL Overall length: 245 +/- 5 mm or 290 +/- 5 mm
Code 71630: Suitable for bacteria-free operations in general surgical rooms, surgical wards, laboratory, cleanroom. Features 1. Contains no natural rubber latex protein. 2. Hypo-allergenic compounds for the most sensitive hands. 3. Excellent puncture resistance. 4. Minimize hand pressure & keeping cooler, drier Color: Blue or white Hand former: Textured surface in the grip area, with size embossed Sterility: Sterile or non-sterile Size S, M, L, XL Overall length: 245 +/- 5 mm or 290 +/- 5 mm
