All of UNION steel wire brushes and abrasive nylon brushes specifications can be assigned to satisfy universal uses with various brands key copy machines. 2. UNION key machine abrasive nylon deburring brush made with silicon carbide impregnated filaments that swiftly and smoothly deburrs on a newly cut key. 3. UNION key machine abrasive nylon is the safest filament help prevent pulling keys out of your hand and drawing down inside the brush cover. 4. Specially developed UNION deburring wheel brush is highly durable, easy installation and easy handling. 5. Available in all filaments equipped with various brands key copy machines.
SANDING BRUSHING Specially developed wheel brushes for deburring. These are suitable for all common deburring machines. Although they are heavier than other brushes because of their dense filling, we exclude any inbalance by evenly arranged filling material and the testing of every brush. Filled with high-quality wire,these brushes have a longer service life. All brushes are with double keyway. Please indicate the required bore.
A curing agent is a standard reactive polyamide intended for use in curing of epoxy resin .It is cut to 60 % solids by weight in xylene. When cured with high molecule weight of epoxy resin .it is provides cured films with such high orders desired at actual application field as good flexibility, simultaneously with good water resistance and good alkali resistance. Thus desired for heavy duty primer coatings application of anti corrosion resistance.
Flooring- a low viscosity, modified -aliphatic polyamines epoxy curing agent. It has been designed for use in solvent-less coatings and leveling floorings where excellent flow, good adhesion and high gloss films are required.
Description 1. Tough film and good adhesion on the concrete, able to penetrate into concrete. 2. Good resistance to water , brine and chemicals. Excellent mechanical strength and physical properties. 3. Good resistance to impact and abrasion. 4. Easy application , drying fast. Prepare to use 1. Mix base and hardener by the mixing ratio and Stir thoroughly, then setting at least 15 minutes. Thinner may be used to reduce viscosity. 2. Remove all foreign particles, oils, grease , rust and moistures from the surface before application. 3. Two packs product, must be used completely during the duration of its pot life. 4. Donâ??t apply when the temperature is < 10â??,>40â??, relative humidity is >90â?? or the surface temperature of substrate is not higher than the dew point for at least 3â??. 5. If the coating interval is exceeded , the surface of base coat must be roughened to insure adhesion. 6. Keep away from heat, sparks and flame. 7. Stored with good ventilation. 8. Keep adequate ventilation during application. 9. The actual coverage may vary, depending on application technique, job conditions and type of surface. Under brushing & rolling application the actual coverage is estimated at 70% of the Theoretical coverage and 60% for spraying. **The parts of data base above could be affect by application condition at job site, please reference guide specification or contact with relative technical personnel. Color : Clear Drying time : Tack-free : 2 hours Hardness : 8 hours Full cure : 7 days (grease)
DESCRIPTION CC-604SP is two component water based epoxy primer, composed from water based of liquid epoxy resin and hardener. APPLICATION 1. To prime the surface and help the following application procedure to mold and decorative coating. 2. Highly resist to chemicals in non-circulated places. 3. With well adhesion ability with epoxy system or PU system application. 4. Suitable for hospital, operation room, food factory to prevent the mold, dust and bacterium. CHARATERISTIC 1. Able to be diluted by water. 2. Anti- efflorescence , suitable for the environment with highly hygienic request. 3. Good adhesion to the moisture surface, can take as the primer for solvent-free or solvent-based epoxy resin.
CS-613W is 2-component water-based premium epoxy product. CS-613W as admixtures can improve the properties, particularly in relation to water absorption reduction, toughness enhancement, vibration damping and increase of the bond strength of cement to reinforcements other than being used as admixtures, CS-613W is used partial replacement of fine aggregate, for coating, sealing and repairing concrete and for coating steel reinforcing bars for corrosion protection. AREA OF APPLICATIONS Repair mortar for concrete areas. Industrial flooring. Bonding agent for new to old concrete. As water based primer. Can be applied with damp surface. FEATURE Weatherproof and waterproof of capabilities that help prevent the deterioration of the ground-coat material. Low odor. Washable with water including tools. Best to wash as soon as possible before it hardens.100% water resistant when cured.
CA-010P as a water-based primer in relation to water absorption reduction and increase the bonding strength of cement to reinforcements other than being used as admixtures increase the mechanical properties and the adhesion of the hardened material. AREA OF APPLICATIONS Repair mortar for concrete areas Industrial flooring Bonding agent for new to old concrete Enhance adhesion strength of mortar
DESCRIPTION Bituminous Primer is product containing oxidized bitumen and a mix of technical quick drying solvents. APPLICATION Bituminous Primer is recommended to block the dust and the porosity of concrete surfaces allowing the quick application o f the bituminous polymer membranes, both with flame application and cold bonding with bituminous sealants or with self adhesive membranes.Bituminous Primer allows quick film drying, has an excellent penetration and adhesion to the support for the absence of surface stickiness. INSTRUCTIONS FOR USE Concrete surfaces must be dry, clean and free from oil, dust or release agents. This type of primer is ready for use after mixing it. Bituminous Primer can be either sprayed or applied by means of roller or brush. In case of hot application of membranes with flame, the primer can be used only if surfaces are completely dry. On the contrary, if the surface is damp, it is recommended to use a bituminous primer specific for damp surfaces. The drying time depends on concrete porosity, on the quantity of product applied and on the temperature of both the surface and the environment. Usually the film gets dry after 2-4 hours from the application. The drying time can increase in case of cold temperature and with low a bsorption surfaces. PACKING 5 gallon Bucket SHELF LIFE The product can be stocked in closed buckets and in dry area, far from UV rays for 12 months. TOOL CLEANING After use clean tools with common solvents.
DESCRIPTION CC-600SP is a two component, solvent-free epoxy system with high chemical resistance and high bond strength. The epoxy may be applied as a primer for most high end industrial coatings, like Epoxies, PU. CHARATERISTIC Easy apply Low odor High bond strength Abrasion resistant Chemical resistant APPLICATION Concrete coating Cement
Our RB4 Steam Coal is a high-quality thermal coal that meets the Standard Coal Trading Agreement (SCoTA) specifications. With a calorific value of 5000 Kcal/kg (net as received), this grade of coal is ideal for power generation and industrial applications that require reliable and efficient energy sources. Key Features: 1. Calorific Value: 5000 Kcal/kg (net as received), providing a balanced energy output suitable for various applications. 2. Compliance: Meets the stringent SCoTA specifications, ensuring consistent quality and performance. 3. Moisture Content: Low moisture content enhances combustion efficiency and reduces transportation costs. 4. Ash Content: Controlled ash levels help minimize slagging and fouling in boilers, contributing to more efficient operations. 5. Sulfur Content: Low sulfur content ensures compliance with environmental regulations, reducing emissions and the environmental impact of coal usage. Applications: 1. Power Generation: Ideal for thermal power plants, RB4 coal offers a reliable energy source for electricity production. 2. Industrial Use: Suitable for cement manufacturing, steel production, and other industrial processes requiring consistent thermal energy. 3. Heating: Can be used in industrial boilers and heating systems where a steady and efficient fuel supply is needed.
"Our RB3 coal meets the rigorous standards set by the Standard Coal Trading Agreement (SCoTA), ensuring high-quality thermal coal for various industrial applications. This coal grade is specifically tailored to meet the needs of power generation and other industrial processes requiring consistent and reliable fuel. Key Features: 1. High Calorific Value: RB3 coal provides a substantial calorific value, ensuring efficient energy production. 2. Consistent Quality: Adheres to SCoTA specifications, guaranteeing uniformity and reliability in every shipment. 3. Low Moisture Content: Reduced moisture content enhances combustion efficiency and reduces transportation costs. 4. Sulfur and Ash Content: Balanced levels of sulfur and ash to meet environmental standards and reduce emissions. Applications: 1. Power Generation: Ideal for use in thermal power plants, RB3 coal ensures efficient and stable electricity production. 2. Industrial Processes: Suitable for various industrial applications, including cement manufacturing, steel production, and other high-energy-demand industries. 3. Domestic Heating: Can be used for residential heating purposes, providing a reliable and cost-effective energy source."
Our Iron Ore is a high-grade raw material essential for steel production and various industrial applications. Sourced from top mining locations, our iron ore ensures superior quality and consistent performance for your manufacturing needs. Key Features: 1. High Purity: Contains a high percentage of iron content, ensuring maximum efficiency in steel production. 2. Consistent Quality: Sourced from reputable mines, our iron ore maintains uniform quality and performance standards. 3. Versatile Applications: Suitable for various uses, including steel production, ironmaking, and as a raw material in other industrial processes. Applications: 1. Steel Production: Primary raw material used in blast furnaces and direct reduction iron (DRI) processes to produce high-quality steel. 2. Ironmaking: Essential for producing pig iron, which is a precursor for various iron-based products. 3. Industrial Uses: Used in cement production, heavy machinery manufacturing, and as a catalyst in certain chemical processes.
Fireproof paints and coatings.
Multifunctional solvent - based color paste, colorant, coating, paints, other solvents, agent, and additive.
Min jung hong is a company established in 1998 specialized in lubricant, engine oil, and all kind of oil. We mainly deal with the production of industrial lubricant for cars, motorcycles, agricultural machinery and maintenance chemicals. Lubricants
Hardener for Epoxy: Reactive Polyamide Resin Denaturalized Polyamine Denaturalized Polyamine Additive Solvent-diluted Polyamide Resin
Coating.
Aerosol products, spray paint : multi-purpose, glow-in-the-dark, lead-free, water-based, high-temperatre resistant, spray lubricant, spray anti-rust, long-lasting anti-rust, spray dry-film lubricant, pu foam (polyurethane foam), metal polish.
Trimmer line, bristle, brush, puller for electrical line, anti static brush, luminous filber, abrasive sand, plastic monofilament, coating, tube, whole plant of monofilament.
