Model: KM-V Technical Data - Main Motor: 2.2kw - Size of Die Roll: 150 x 250mm - Quantity of pistons: 20each - Dimension: 2180(L) x 804(W) x 1870(H) mm - Weight: 1900 kg
Model: JS-FLCD-TM 1020 * Max. Paper size: 1020 mm wide x 720 mm long * Min. Paper size: 400 mm wide x 260 mm long * Maximum Pressure: 300kg/cm2 * Drying oven temperature: 40~90° C * Machine speed: 20~60 m/min * Heat roller of Register Process Section: 15 Kw * Electric Power Consumption: 15 Kw * Total Power: 30 Kw * Dimensions: 8095 mm Long x 1680 mm Wide x 1785 mm High * Machine Weight: 7 Ton
Model: JS-HUV-1020 Fully Automatic Stack to Stack UV(Spot)/Water Base Coating Machine. * Maximum Paper size: 1020 mm wide x 720 mm long * Minimum Paper Size: 300 mm wide x 260 mm long * Coating Range: 1020 x 720 mm * Paper Thickness: 120 ~ 450 GSM * Machine Speed: 8, 000 Sheets/min. (UV) * IR Capacity: 1kw x 24 EA * Machine Size: 10, 450 mm Long x 2, 935 mm Wide x 1, 722 mm High * Machine Weight: 12, 000 Kg * Electric Power Consumption: 78Kw
MODEL: JS-FLCD-S 1020 * Maximum Paper Size: 1020 mm wide x 720 mm long * Minimum Paper Size: 470 mm wide x 260 mm long * Drying oven temperature: 40~90 ° C * Max. Pressure: 300 kg/cm2 * E. P. C: Servo Motor E. P. C * Machine Dimension: 10, 525 mm Long x 1, 680 mm Wide x 2, 780 mm High * Heater Capacity: 73.5 kw * Machine Electric Power: 15 kw * Machine Weight: 11, 000 kgs MODEL: FLCD-S 1090 & FLCD-S 1250 available.
We exports wide range of fearring Ashion accessory with trendy design and high quality produced in korea including jewelry, earring, necklace, bracelet, ring, etc For more details, please contact us
Glove port is a manual retractor mainly used in laparoscopy. Glove port holds back the edges of the incisions to insert the operative appliances and the endoscope into the body through cook caps. 1) Sheet: opens the incision wider to let endoscope and surgical instruments in it, covering up the whole edges of the incision. It is rolled up and fixed according to abdomen thickness using outer ring. 2) Excision pocket: puts small-sized specimens. 3) Outer ring: fits the height of Glove Port to the thicknesses of the abdominal walls by folding sheet with outer ring, adhering to the outer part of the abdominal walls. 4) Cook cap: helps instruments and endoscope to be inserted into the sheet. Cook caps are divided into two types by color: blue one is used for 10~15mm diameter instruments and the white one for 3~10mm diameter instruments. 5) Valve body: connects cook cap and lip valve. 6) Fix ring: locks up cook cap and lip valve. 7) Lip valve: prevents CO2 gas from leaking till the surgery is completed. 8) Injection valve: CO2 injection. 9) Ejection valve: CO2 emission. 10) Inner ring: sticks to the inner abdominal walls and fastens Glove Port. 11) Removal line: linked with inner ring. Inner ring is taken out as removal line is pulled out. 12) Removal ring: helps to remove the inner ring. 1) Only 2~2.5cm incision is required. So when you perform a surgery with Glove Port, Glove Port rarely remains scar. 2) Glove Port is applicable to all kinds of patients. Glove Port is capable to adjust the height according to the thicknesses of the patients' abdominal walls, as sheet is able to be rolled up by outer ring. 3) Sheet is made of polyurethane. Since Polyurethane is more sturdy and softer than silicone which is used in the previous products, Glove Port is not torn easily. In addition, the direction control is flexible so that curved instruments get inserted. 4) Easy to inject and emit CO2 gas. Glove Port has the gas inlet and outlet separately. 5) High-elastic Cook Cap It lets 3~15mm instruments endoscope and even Endo GIA inserted into Glove Port. 6) Convenient removal With removal line and removal ring, Glove Port can be easily removed after the surgery. 7) Flexibility It allows curved instruments to be inserted easily, giving free angle.
Endo keeper(wound retractor) is the channel to take out the specimen and fix incision and open it. Also wound retractor protects from the contamination and infection. â?¦ Endo keeper (C&CG) simple characteristics 1) Easy insert with two step design- Wound retractor & cap 2) High elasticity 3) Can be opened during operation 4) CO2 injection is possible without the help of other instrument 5) Separation gas inlet â?¦ Advantages 1) Wound Retractor is made of polyurethane. -> Polyurethane is sturdy and soft so that Wound retractor is not torn easily. In addition, the direction control is flexible so that curved instruments get inserted. 2) Easy to inject CO2 gas. ->Endo keeper has the gas inlet. 3) High-elastic Port Cap -> It protects leak to the Gas and can open during the surgery. It is flexible so it can be moved and bent in every direction. 4) Convenient removal ->with removal line and removal ring, Endo keeper can be easily removed after the surgery. â?¦ How to use 1) Make a 2.5 cm incision on the navel area. 2) Squeeze the inner ring. 3) Insert the inner ring into the incision. 4) Adjust the outer ring to install the inner ring inside the abdominal wall. 5) Roll up the Urethane wound retractor and fix the outer ring according to abdomen thickness 6) Connect the valve connector to inject CO2 gas. 7) Insert surgical instruments and endoscope through port cap. 8) Remove the Endo Keeper by pulling the removal ring.
PORTABLE UVC MASK STERILIZER -Blue,Pink,White Reuse MB filter mask up to 10 times with SOOMLAB's UVC mask sterilizer UVC mask sterilizer is certified by KCL a government appointed testing facility for safety. IT has passed test with successful rate and proved of 99.99% removal of 7 bacteria including Escherichia coli in 3 minutes of sterilization. Easy to use! 3 minutes and your mask is clean Light weight and compact size. 49g only Card slip at th back
This product is an unique composite material that glass fabric is inside and ptfe is coated on both side. Reinforced by glass fabric inside and ptfe coated on outsde, outstading mechanical strength and heat resistance , non-adhesiveness , slipping property and chemical resistance due to ptfe property. Thickness 40um ~ 300um Width: ~1500mm Various application fields such as, electronic industries, packaging, releasing sheet and food ~1500mw * 100m or 50m
This product is an unique composite material that glass fabric is inside and ptfe is coated on both side. Reinforced by glass fabric inside and ptfe coated on outsde, outstading mechanical strength and heat resistance , non-adhesiveness , slipping property and chemical resistance due to ptfe property. Thickness 40um ~ 300um Width: ~1500mm Various application fields such as, electronic industries, packaging, releasing sheet and food ~1500mw * 100m or 50m
Used textile machinery A) cotton ring spinning plant B) ring frames C) open end spinning plant D) auto winder E) flat bed printing machine F) sizing machine G) air jet looms, water jet looms and rapier looms H) yarn dyeing plant/used but reconditioned/korean origins - type: cone (=cheese), hank, etc. - materials: cotton, polyester, cotton cum polyeter, etc. I) fabric dyeing & finishing plant/used but reconditioned/korean origins - type: vertical wiinch dyeing, rapid dyeing, high-soft dyeing, etc. - materials: cotton, polyester
Ring spun polyester sewing thread, tfo polyester sewing thread, polyester & nylon textured yarn, polyester & viscose rayon embroidery thread, cotton thread, poly wrapped & cotton wrapped core spun thread, knitting & woven yarn, nylon bonded 6.6 thread & polyester high tenacity thread, metallic thread, fancy yarn & feather yarn.
It is Pneumatic Fitting linking pneumatic components. 1. Fast Installation, easy and skillful, saving spaces 2. Diversified types may satisfy the need of any pneumatic pipe arrangement 3. Even after installation, the plastic tube can be freely turned 4. The release ring adopts ellipse design, which makes disassembly more easy 5. All conical tube thread are pre-coated with Teflon leak Proof glue, which secures good sealing performance
Suspension parts , brake pads , brake disc , shock absorbers , water pump , piston Piston ring , filters , fuel pump , oil pump , engine valve , cylinder liner , gasket, Starter , alternator , radiator , clutch cover , body parts , bearing , etc. Genuine auto parts : Hyundai , kia , mobis , dawoo (chevrolet) , ssangyong Oem auto parts Phc valeo , gmb , tcic , mando , doowon, ypr , seco , hi-q , champion , hcc , sb , delphi , dejeng & and other brand Any
We provide BTS character strap keychain BTS is super star in the world. We has officially signed a license agreement with Hybe Ent. Army which is BTS fan in Every country and they decorate daily life with favorite member. if you are looking for BTS item or unique keychain, we can supply Please contact us and we can provide our best pricing. We recommend it to girls who like K-pop. It is an item with soft poly material strap and solid leather connection. You can separate into two types and use them in various ways. Straps and key rings can be used in cell phones and bags. BTS keychain is designed in Korea. Material: metal, nylon Size : 32mm * 150mm Member : RM, JIN, SUGA, J-HOPE, JIMIN(sold out), V(sold out), JUNGKOOK(sold out)
Feature: Suitable for clear fluid lines such as Water, Liquid, Gas, Steam, etc. This valve is used in systems that require precise flow control and where leakage and air-tightness are critical. Application: It is essential for the flow line of each industry. Mainly used in plant automation facilities due to excellent precision control such as flow rate, pressure, temperature, etc. Characteristics: 1. For excellent wear and tear resistance, Stellite welding is used by default on core components such as plug and seat ring. 2. It is possible to achieve excellent durability of the unfavorable fluid condition and high temperature through heat-treatment on parts of the stem and trim 3. The selection of accurate trim and material through extensive testing and rich experience in technical solution 4. In case of a product related problem, we have technical personnel who can immediately assess the situation and resolve the issue
LV-17 Y-Strainer + Basic Design: Manufacture Standard + Body Wall Thickness: ASME B16.34 + Pressure Rating: ASME B16.34 + Face To Face: Manufacture Standard + Body Bore Size: ASME B16.34 + Marking System: MSS-SP-25 + End Connection: - ASME B16.5(Raised Face) / - ASME B16.25(Butt Weld) / ASME B16.34(Ring Joint) + Flange Size: +ASME B16.5 for 24" & below size +ASME B16.47 Series "A" or MSS-SP-44(For 26" & above size) +API 605 Series "B"(For 26" & above size) + Inspection And Testing: API 598 + Finishes For Contact Faces of Flanges: +ASME B16.5 or MSS-SP-6 + Option: - Drain Plug(ASME B16.34 / MSS-SP-45) - Threads(ASME B1.20.1)
LV-16 Forged Steel Gate Valve + Basic Design : API 602 / BS 5352 / ASME B16.34 + Body Wall Thickness : ASME B16.34 or API 602 + Pressure Temperature Rating : ASME B16.34 + Face To Face : API 602 + Body Bore Size : API 602 / ASME B16.34 / ISO 15761 + End Connection: - ASME B16.11(Socket Weld Ends) - ASME B1.20.1(NPT) - ASME B16.25(Butt Weld) - ASME B16.5(Raised Face) + Inspection And Testing: ASME B16.34 + Finishes For Contact Faces of Flanges: ASME B16 5 or MSS-SP-6 + Marking System: MSS-SP-25 + Option: - Locking Device - Live Loading(Belleville Spring) - Welded Bonnet / Ring Joint Bonnet
LV-16 Forged Steel Check Valve + Basic Design: API 602 / BS 5352 / ASME B16.34 + Body Wall Thickness: ASME B16.34 or API 602 + Pressure Temperature Rating : ASME B16.34 + Face To Face: API 602 + Body Bore Size : API 602 / ASME B16.34 / ISO 15761 + End Connection: - ASME B16.11(Socket Weld Ends) - ASME B1.20.1(NPT) - ASME B16.25(Butt Weld) - ASME B16.5(Raised Face) + Inspection And Testing: ASME B16.34 + Finishes For Contact Faces of Flanges: ASME B16 5 or MSS-SP-6 + Marking System: MSS-SP-25 + Option: - Locking Device - Live Loading(Belleville Spring) - Welded Bonnet / Ring Joint Bonnet
LV-16 Forged Steel Ball Valve + Basic Design: API 602 / BS 5352 / ASME B16.34 + Body Wall Thickness: ASME B16.34 or API 602 + Pressure Temperature Rating : ASME B16.34 + Face To Face: API 602 + Body Bore Size : API 602 / ASME B16.34 / ISO 15761 + End Connection: - ASME B16.11(Socket Weld Ends) - ASME B1.20.1(NPT) - ASME B16.25(Butt Weld) - ASME B16.5(Raised Face) + Inspection And Testing: ASME B16.34 + Finishes For Contact Faces of Flanges: ASME B16 5 or MSS-SP-6 + Marking System: MSS-SP-25 + Option: - Locking Device - Live Loading(Belleville Spring) - Welded Bonnet / Ring Joint Bonnet
