South Korean Steel Casting Suppliers and Manufacturers

Product : Steel fowmwork. Steel formwork is our flagship items since Hory has been producing it in 2010. Currently supplying it to several countries as 'Japan', 'Thailand', 'Russia', 'Cambodia', 'Vietnam', 'Philippines' as well as 'U.S.A'.

Product : Steel pipe (Galvanized) Size : 1.8thk, 2.0thk, 2.3thk Pipe is our flagship items since Hory has been producing it in 2010. Currently supplying it to several countries as 'Japan', 'Thailand', 'Russia', 'Cambodia', 'Vietnam', 'Philippines' as well as 'U.S.A'.

We can supply steel for Green / White boar manufactured by UNION STEEL, DONG-BU STEEL, POSCO C&C. And we have our own steel coil center, we can offer according to your reqiurement size.(sheet or coil) * CHARACTER - Minimizing contamination - Easy write (smooth surface) - Easy clean * SURFACE - PET FILM - GRID * Brand Name : POSCO C&C, DONG-BU STEEL, UNION STEEL * Place of Origin : South Korea * Thickness : 0.30 mm / 0.40 mm * Width : 890 mm / 1190 mm * Min. Order Quantity : 20 MT (individual inquiryfor under M.O.Q) * Price : FOB Busan(negotiation with Mills) + sea freight + commission + insurance premium * Payment Term : T/T advance 20%, L/C at sight, L/C 90 days from B/L date * Delivery Time : 45 ~ 60 days from L/C or Mill's option. Export standard steel packing - coil : horizontal, vertical - sheet : according to customer's order.

Pre-painted Hot-Dipped Galvanized Steel Sheet (in Coil) confirming to JIS G3312 CGCC - Coating Top side: 5 micron primer + 20 micron Regular Polyester Paint + Protective Film (50 micron) Back side: 5~7 micron Epoxy service coating - Base metal: Hot-Dipped Galvanized Steel (JIS G3302 SGCC Zinc 120~180g/m2) - Coil Inner Diameter: 508 mm or 610 mm - Coil weight: 2 MT Max. (buyer’s option)

1. Regarding of stainless strip in coil, we are very specializing in csp, b/a (cold strip for spring - hard tempered) -1.4310(aisi301), 1.4301(aisi304), 1.4307(aisi304l) and ep11(1% nickel). ** thickness : 0.07mm ~1.50mm ** width : 7mm ~ 400mm 2. Now, we would like to introduce our new substitute item of aisi 301. Our new item is a sk-5 (t/s 2000 ~ 2400n/mm2 - for power spring) for seat belt, clock and vacuum cleaner spring. We already developed and tested the item with posco We are sure that you will be satisfied with our quality. ** thickness for power spring : 0.10mm ~0.40mm ** width : 7mm ~ 290mm ** t/s : min 2, 000n/mm2 ** thickness for gerneral application : 0.50mm ~ 1.70mm ** width : 30mm ~ 400mm ** soft tempered : hv190 max, hard tempered : hv260 max

Hardened & tempered strip steel Dimension (mm) Thickness 0.3mm to 2.5mm Width : 2.8mm to 260mm The strips are careful packed on skids in corrugated board boxes or wooden boxes and strapped with steel band.

Steel wire ropes

We can supply high quality and low price steel rebar for construction buildings. Standard: AISI, ASTM, BS, DIN, GB, JIS. Steel Grade: HRB400 or HRB500. Diameter: 6-50mm. Length: 1-12meter as per requirement of customers. Place of Origin: Tianjin, China. Steel Kind: Carbon Steel Rebar. Application: Construction Buildings, Roads, Bridges. Supply Ability: 100,000 Tons per Month. Packaging Details. 6mm-10mm: packing in coil with steel wire. 11mm-50mm: strainghtness rebar in bundle with steel wire. Payment Terms: By 100% L/C At Sight or T/T 30% deposit & 70% against B/L copy. Loading Port: Xingang Port, Tianjin City, China. Delivery Time : 15-30 days in accordance with order quantity. Steel Rebar Data Size(mm) Weight(kg/m) Weight (kg/pc) Quantity (1 ton/pcs) Length 6m / 12m Length 6m / 12m 6mm 0.222kg 1.332kg 2.664kg 751pcs 375pcs 8mm 0.395kg 2.37kg 4.74kg 422pcs 211pcs 10mm 0.617kg 3.702kg 7.404kg 270pcs 135pcs 12mm 0.888kg 5.328kg 10.656kg 188pcs 94pcs 14mm 1.21kg 7.26kg 14.52kg 138pcs 69pcs 16mm 1.58kg 9.48kg 18.96kg 106pcs 53pcs 18mm 2kg 12kg 24kg 83pcs 42pcs 20mm 2.47kg 14.82kg 29.64kg 67pcs 34pcs 22mm 2.98kg 17.88kg 35.76kg 56pcs 28pcs 25mm 3.85kg 23.1kg 46.2kg 43pcs 22pcs 28mm 4.83kg 28.98kg 57.96kg 35pcs 17pcs 32mm 6.31kg 37.86kg 75.72kg 26pcs 13pcs 36mm 7.99kg 47.94kg 95.88kg 21pcs 10pcs 40mm 9.87kg 59.22kg 118.44kg 17pcs 8pcs 50mm 15.42kg 92.52kg 185.04kg 11pcs 5pcs Kind Regards, Pan Sool Kim President

We can supply high quality and low price Steel Plate.

We can supply high quality and low price Steel Coil.

We can supply high quality and low price Steel Pipe.

The company's philosophy on all projects is to give the best service to clients in all phases of the design and construction process. We inform our clients of various framing systems and present them with comparative cost and design data. We provide our clients with as clear and complete construction drawings, specifications, and cost estimates as possible. We provide site supervision during construction and respond to problems quickly. Our staff are kept abreast of the latest design techniques and state of the art procedure. We believe this is of utmost importance when selecting a system to be used in a structure, and which must be consistent with the architectural concept of the project. At the same time, the system utilized must be both efficient and economical.

Spatial structures, super-tall structures, specific structures, SHM.

Steel siding A. Normal type 2000mm(length) x 280mm(effective width) x 20pcs per box Net weight : 67.8kg/box 3500mm x 280mm(effective width) x 12pcs per box Net weight : 71.6kg/box B. Rp type steel siding 2000mm x 360mm(effective width) x 18pcs per box Net weight : 64.8kg/box 3500mm x 360mm(effective width) x 10pcs per box Net weight : 63.0kg/box Normal type : 3600mm x 370mm x 100mm 2100mm x 370mm x 130mm Rp type : 3600mm x 470, , x 150mm 2100mm x 470mm x 240mm

Hot dipped aluminized steel (AL) is a rolled steel with an aluminized metal coating desined specifically for high temperature applications. The coating consists of an aluminium alloy containing about 8~10% silicon. * HEAT RESISTANCE : Lengthy exposure to temperatures up to 450 degrees Celsius causes very little change in Hot dipped aluminized steel and does not affect its attractive surface brightness, compared with galvanized steel sheet and cold-rolled steel sheet. * HEAT REFLECTIVITY : The thermal reflectivity of Hot dipped aluminized steel at 450¡É reaches up to approximately 80%, and this is applied to thermal reflectors for toasters, gas ranges, oil stove, and so forth. * HIGH CORROSION RESISTANCE : The corrosion resistance of Hot dipped aluminized steel is excellent due to the coating characteristics to form a thin stable oxide layer and hydroxidation layer in the air and water, respectively. * SPECIFIC USES - Automobile : Exhaust Muffler, Fuel tank, Engine heat shield, Engine manifold - Industrial : Drying furmace, Metal jacketing - Baking : Bread pan, Cake pan, Cake mould - Heating appliance : Boiler pilot burner part, Fanned heater - Home&Cooking appliance : Rice cooker, Gas range, Microwave oven, Toaster, Electrical frying pan. * Brand Name : POSCO C&C, DONG-BU STEEL * Place of Origin : South Korea * Thickness : 0.40 mm ~ 2.30 mm * Width : 800 mm ~ 1250 mm * Min. Order Quantity : 20 ~ 25 MT / one 20ft container * Payment Term : T/T advance 20%, L/C at sight, L/C 90 days from B/L date * Delivery Time : 45 ~ 60 days from L/C or Mill's option. Standard export steel packing - coil : horizontal, vertical - sheet : according to customer's order.

* CHARACTER Cold rolling at, or above, a 40 percent reduction rate causes the grains of the metal to align in the direction of rolling. And it does undergo finishing processes such as annealing and temper rolling, this result in smooth, attractive surface as well as uniform thickness and flatness. Based on the high workable, they are essentially in their role as the base metal for tinplate, galvanized sheets and other coated steel products * PRODUCT FEATURES Cold-rolled steel products have clean surface and excellent drivability. They are also characterized by their superior formality and printability. So CR steel product is currently applied to various fields including automobiles, electric household appliances, and furniture office equipment. * CLASSIFICATION OF QUALITY - Commercial Quality (CQ) - Sheet of this quality is for simple bending or moderate forming. Commercial steel sheet can be bent flat upon itself in any direction at room temperature. It has a wide variety of uses, including automotive panels, electrical home appliances, drums, pipes, farm implements, office supplies, building and civil work materials, and as base metal for various coatings. - Drawing Quality (DQ) - Sheet of this quality has a greater degree of ductility and is more onsistent in performance than commercial steel because of higher standards in production, selection and melting of the steel. It is suitable for automotive panels, audio-visual equipment, and heating apparatuses. - Deep Drawing Quality (DDQ) - Sheet of this designation should be used when drawing steel will not provide a sufficient degree of ductility for fabrication of parts with stringent drawing requirements, or applications that require the sheet be free from aging. This quality is produced through special steelmaking and finishing practices. It is suitable for automotive front panels and rear fenders. - Stabilized Deep Drawing Quality (DDQ-N) - Stabilized deep drawing quality products boast the highest quality in terms of workability. It is suitable for automotive parts that require complicated treatment such as front fenders or wire. As a non-aging deep drawing sheet made with Al-killed, quality is guaranteed against extreme stretching or straining. * SURFACE FINISH - Dull Finish - Dull finish, which is attained by attaching numerous fine grains onto the steel surface, is often called 'pear-skin finish' or 'egg-shell texture'. The grains are made by steel grit blasted roll. The dull finish is useful in drawing because lubricant oil can be evenly spread over the entire surface, thereby reducing the possibility of friction. The fine grains also help boost paint adherence and extend the steel life span of the steel. - Bright Finish - Bright finish presents high-quality roughness that is optimal for decorative purposes. The sheet surface is rolled with fine polished rolls. * EDGE - Mill Edge - Edges produced by trimming hot rolled coil during the pickling process, prior to cold rolling. - Slit Edge (Trimmed Edge) - Edges produced by shearing or slitting during the cold rolling process. * OILING Sheet that is processed with the final step being the application of oil to the surface; usually intended to provide protection from rusting during shipment and storage. The oil may also serve to assist in the subsequent fabrication process, but this is not usually the main purpose. We deliver its steel products either oiled (heavy, general or light, dos oiling, powdering) or un-oiled. * Brand Name : DONG-BU STEEL, UNION STEEL * Place of Origin : South Korea * Thickness : 0.30 mm ~ 3.20 mm * Width : 600 mm ~ 1250 mm * Min. Order Quantity : 20 ~ 25 MT / one 20ft container * Price : FOB Busan(negotiation with Mills) + sea freight + commission + insurance premium * Payment Term : T/T advance 20%, L/C at sight, L/C 90 days from B/L date * Delivery Time : 45 ~ 60 days from L/C or Mill's option. export standard steel packing - coil : horizontal, vertical - sheet : according to customer's order.

Product Description Galvanized Steel Wire For ELectric Cable Purchase Specification 1. Diameter and Tolerance(mm) 0.9~1.60 2. Mechanical performance - Tensile strength: 450-770MPa. - tensile elongation: 10% minimum. - Zinc weight, minimum: 20~55 g/m^2. - Weight of galvanized steel: 7.1 LBS/1000FT (for reference only) 3. Surface Condition If supplied on reels: Wire should not have oil, water, dust, and should not have disfigurement of cracks, bend, burr, rust or pit. The layer of galvanized zinc should be continuous and even. Every reel of wire should be one piece and should not have any splices. Product origin : Made In China Made In Korea Key Specifications/Special Features : Cable, Mask, Steel Wire Minimum Order Size and Packaging details : Minimum 20 Feet Container 1 Container 44 Rolls

Product Description : Galvanized Steel Wire For Electric Cable Specification 1. Diameter and Tolerance(mm) 0.5~1.60 2. Mechanical performance - Tensile strength: 450-770MPa. - tensile elongation: 10% minimum. - Zinc weight, minimum: 20~55 g/m^2 Product origin : China, South Korea Key Specifications/Special Features : STEEL WIRE FOR CABLE, MASK