CHEMICAL CHARACTERISTICS: Free Fatty Acid: 0.1 - 0.15% max Peroxide Value: 1.0 - 2.0 meq/kg max Color (Lovibond): 12.0 - 15.0 Yellow / 1.5 - 2.0 Red Iodine Value (Wijs): 100 - 122 Moisture: 0.05 %max AOM: 20 hrs min Cold Test: 5.5 - 12 hrs min Refractive Index @ 40oC: 1.460 - 1.467 Specific Gravity @ 25oC: 0.914 - 0.920 Saponification Value: 182 - 193 Smoke Point: 460 - 530oF Flash Point: 610 - 640oF Fire Point: 670 - 690oF FATTY ACID PROPERTIES: C16:0 Palmitic 3.0 - 5.0% C16:1 Palmitoleic 0.2 - 0.3% C18:0 Stearic 1.0 - 3.0% C18:1 Oleic 56.0 - 76.0% C18:2 Linoleic 10.0 - 24.0% C18:3 Linolenic 4.0 - 13.0% C22:1 Erucic 0.2 - 1.8% FATTY ACID DISTRIBUTION: Saturated 4.3 - 7.4% Monosaturated 54.4 - 65.0% Polyunsaturated 27.2 - 37.0% CRUDE CANOLA/RAPESEED OIL SPECIFICATIONS: Free Fatty Acids (As OLEIC) Molecular Weight 282-Basis: BASE 1.00% MAX. 1.25% Moisture and Volatile Matter: 0.20% MAX. Density (Specific Weight) at 25 C and 4 C Min. 0.9180 Max. 0.9225 Flash Point: MORE THAN 121 (250 F) Saponification value Min. 188 Max. 198 Impurities (Insoluble in Petrol Ether): 0.10% MAX. Unsaponifiables Matter (test as per N.O.P.A.): Max. 1.50 pct. Sediment (Gardner Break Test): 0.10% MAX. Lecithin (expressed as Phosphorous): 0.02% MAX. Color Index (MG Iodine) (Lovibond Cell 1 inch): 50-60 Yellow and 5-6 Red. Refractive index at 20 degrees C: 1.505 to 1.512 Halphen reaction Negative Density (at 15�° C): 900-930kg/m3 Flash Point: 220�°C ( closed up, Pensky-Martens method) Calorific value: 35.000 kJ/kg Kinematic viscosity: 38 mm2/3 (40�°C) Coke deposit: 0.4 mass-% (Conradson procedure) Iodine value: 100-120g/100g Sulphur content: 20mg/kg Neutralizations number: 2,0mg KOH/g Phosphorus content: 15mg/kg Water content: 75mg/kg Ash: 0.01 mass%
1.Polyethylene glycol series products can be used in pharmaceuticals. Polyethylene glycol with low relative molecular weight can be used as solvent, co-solvent, O/W emulsifier and stabilizer, used to make cement suspensions, emulsions, injections, etc., and also used as water-soluble ointment matrix and suppository matrix, solid waxy polyethylene glycol with high relative molecular weight is often used to increase the viscosity and solidification of low molecular weight liquid PEG, as well as compensate other drugs; For drugs that are not easily soluble in water, this product can be used as a carrier of solid dispersant to achieve the purpose of solid dispersion, PEG4000, PEG6000 is a good coating material, hydrophilic polishing materials, film and capsule materials, plasticizers, lubricants and drop pill matrix, for the preparation of tablets, pills, capsules, microencapsulations, etc. 2.PEG4000 and PEG6000 are used as excipients in the pharmaceutical industry for the preparation of suppositories and ointments; It is used as a finishing agent in the paper industry to increase the gloss and smoothness of paper; In the rubber industry, as an additive, it increases the lubricity and plasticity of rubber products, reduces power consumption during processing, and prolongs the service life of rubber products. 3.Polyethylene glycol series products can be used as raw materials for ester surfactants. 4.PEG-200 can be used as a medium for organic synthesis and a heat carrier with high requirements, and is used as a moisturizer, inorganic salt solubilizer, and viscosity adjuster in the daily chemical industry; Used as softener and antistatic agent in the textile industry; It is used as a wetting agent in the paper and pesticide industry. 5.PEG-400, PEG-600, PEG-800 are used as substrates for medicine and cosmetics, lubricants and wetting agents for rubber industry and textile industry. PEG-600 is added to the electrolyte in the metal industry to enhance the grinding effect and enhance the luster of the metal surface. 6.PEG-1000, PEG-1500 is used as a matrix or lubricant and softener in the pharmaceutical, textile and cosmetic industries; Used as a dispersant in the coating industry; Improve the water dispersibility and flexibility of the resin, the dosage is 20~30%; The ink can improve the solubility of the dye and reduce its volatility, which is especially suitable in wax paper and ink pad ink, and can also be used in ballpoint pen ink to adjust ink viscosity; In the rubber industry as a dispersant, promote vulcanization, used as a dispersant for carbon black filler. 7.PEG-2000, PEG-3000 are used as metal processing casting agents, metal wire drawing, stamping or forming lubricants and cutting fluids, grinding cooling lubricants and polishes, welding agents, etc.; It is used as a lubricant in the paper industry, etc., and is also used as a hot melt adhesive to increase rapid rewetting capacity. 8.PEG-4000 and PEG-6000 . 9.PEG8000 .
Non dairy creamer is white or creamy powder dried by spray with excellent fluidity and stability. It is designed for rapid direct dispersion into hot consumer use beverages such as instant coffee, black tea, milk tea, cereal, seasoning & soup and infant formula. It can not only improve the color of coffee and tea, but also can make the taste flavor smoothness. Reference materials for our dearest customers to save time to choose products u need: Non-dairy creamer for coffee Fat 20%-60% Protein: 2.0%-5.0% Non-dairy creamer for formula milk Fat 35%-80% Protein 2.0%-4.5% Non-dairy creamer for milk tea Fat: 28%-50% Protein 2.0%-5.0% Non-dairy creamer for ice cream Fat 27%-80% Protein: 2.0%-6% Non-dairy creamer for cereal Fat 25%-50% Protein:1.5%-4.5% Non-dairy creamer for bakery food Fat 30%-80% Protein:1.2%-5% A. For coffee: 1, To modify color of coffee by its excellent whitening powder and make coffee softer; 2, To restrain bitterness of coffee; 3, To add a smooth, rich sense to coffee; B. For Milk Tea: 1, To add a smooth, rich and natural creamy taste to tea without artificial essence; 2, To restrain bitterness of tea and cover possible odd taste; 3, To modify color of tea to make it glitter; C. For cereal: 1, whiten soup and increase its thickness; 2, improve soup sense and make it more delicious; 3, decrease costs of products in some extent; D. For Baking: 1. improve texture of baking products 2. improve physical property of paste and make it more operable 3. avoid aging of baking and prolong its shelf life F. For bubble tea, oatmeal, ice cream, cakes etc 1. make the structure of cakes exquisite and increase 2. sweet milk fragrance Our Services 1.Before shipping,sample is available. 2.Various products models for different usages for you to choice,both high and medium-lower class. 3.Several package specification:25kg/bag,20kg/bag,1kg/bag,250g/bag,40g/bag,15g/bag.With photo before shippment. 4. Fast shipment by reputed shipping line. 5.Perfect after-sale service.
1. alfalfa hay lucerne (single pressed / double compressed bales 400kg bales) + 700kg bales. 2. teff 3. lamb carcasses a grade lamb 4. airfreight strawberries 5. maize & soybean meal extruded.
Hi We are the suppliers of various commodities like Coal (RB1, RB2, RB3 and Antracite), Chrome(ROM and Concentrate), Iron Ore, Oil&Gas(Diesel),Trucks and Tanker to the mines and petro ports to transport the commodities etc.
Visor : PET 400 microns Headband : High Density Polyethelene Headstrap : Rubber Elegant Lightweight Durable Multi Adjustable Strap 1 size fits all
Visor : Polycarbobate (1500microns) Headband : ABS Headstrap : Rubber Anti Fog ; Super Strong Visor ; Elegant ; Lightweight ; Durable ; Multi Adjustable Strap ; 1 size fits all
We can supply 3ply,FFP1,FFP2,Kn95 and N95 masks in South Africa
Ffp1 moulded sabs & ce standard approved dust mask. 20 mask in small box and 20 small boxes in one carton
Classifications: KF94, CE FFP2, FDA Class II Non-woven LIP 3D Mask is shaped in flat form. Tested with sodium chloride, Hummingbird masks are safe for daily use. Hummingbird 3D KF94 Respirator is equivalent in quality to Europe FFP2 mask or FDA Class II respirator Initial NaCl Penetration Value - Approved Initial Paraffin Oil Penetration Value -Approved Initial Pressure Drop Value - Approved Individual / Bulk Packaging Non-Woven Black or White Made In South Korea
FFP2 Delta plus N95 side value (yellow) 800,000 pcs available. FOB any port in South Africa or CIF anywhere in the world.
Disposable 3 ply face masks ce ffp1 certified, fda class 1 registered 3d (four layer) kf94 face masks (kn95/n95) equivalent) ce ffp2, fda class 2, kfda registered 70% alcohol based hand sanitizer.
Specifications 1)Be. Degree> 42% Be. 2)Moisture
Product Description Application: 1. Ammonium phosphate is a kind of water soluble quick acting compound fertilizer, in proportion to the content of AP²O5 and TN about 5.44:1, is one of the main varieties of high concentrations of phosphate and compound fertilizer. 2.Commonly used as additional fertilizer, is main raw material of compound fertilizer. 3. It is widely used in rice, wheat, corn, sorghum, cotton, fruits, vegetables and other all food crops and economic crops; Application to all kinds of soil, especially in drought little rain areas. 4 As a fertilizer, ammonium phosphate was the most suitable for crop growth. 5.In acidic soil than superphosphate, ammonium sulfate, in the alkaline soil than other fertilizer superiority. SPECIFICATIONS STANDARD RESULT TOTAL NUTRIENT: 73%MIN 73.10% NITROGEN(N): 12%MIN 12.10% PHOSPHATE (P2O5): 61%MIN 61.00% MOISTURE: 0.2%MAX 0.13% WATER INSOLUBLE MATTER: 0.1%MAX 0.01% Arsenium (as As), ppm 0.11MAX 0.07 - 0.11 Chromium (as �¡r), ppm 0.24MAX 0.10 - 0.24 Lead (as Pb), ppm 0.1MAX < 0.1 COLOR WHITE CRYSTAL WHITE CRYSTAL Attentions: 1 Aammonium phosphate was acidic in the soil, and the seed was too close to the potential adverse effect. 2 Not with alkaline fertilizer mixed use, so as not to reduce fertilizer efficiency. For example the acid soil use lime in the South, using ammonium phosphate should be during few days after that. Packing & Delivery Packing way: Double ply bags (moisture - proof bags): Woven bag with PE liner bag as 25 kg /50 kg or as customer's requirement
Matcha has high quality requirements for raw materials, requiring the use of high-amino acid, protein and chlorophyll-containing tea leaves, while requiring low levels of tea polyphenols and caffeine in the raw materials. Before picking, there are requirements for picking time and leaf size of fresh tea leaves. Matcha production time is short, only about 50 days, with 4, 5 months of high-quality fresh tea as raw materials, the quality of matcha produced is the best. The tree species used in the processing of matcha tea are also exquisite. This tea tree is cultivated by clonal breeding techniques to ensure the purity of the tea tree variety. In addition, in order to ensure the quality of fresh leaves, during the planting process, the staff also needs to shade the tea trees, and the tea produced in this way is called the covered tea. Matcha is made by coating tea as raw material. Storage Stored in a clean,cool,dry area; keep away from strong, direct light. Function of Green Tea Powder and Matcha Powder: 1. Green tea is picked before the Qingming Festival, and the quality of such tea is the best. The summary of the matcha is postponed until May, in order to extend the growth period of the tea to reduce the bitter tea polyphenols in the tea. Therefore, the biggest difference between the finished matcha and green tea is that there is basically no bitterness, and green tea has a bitter taste. Green tea powder Green tea contains vitamin C and flavonoids, This flavonoid is also a precious nutrient, so it has a treasure-level effect. Green tea powder can be used as a mask to cleanse the skin.
Matcha has high quality requirements for raw materials, requiring the use of high-amino acid, protein and chlorophyll-containing tea leaves, while requiring low levels of tea polyphenols and caffeine in the raw materials. Before picking, there are requirements for picking time and leaf size of fresh tea leaves. Matcha production time is short, only about 50 days, with 4, 5 months of high-quality fresh tea as raw materials, the quality of matcha produced is the best. The tree species used in the processing of matcha tea are also exquisite. This tea tree is cultivated by clonal breeding techniques to ensure the purity of the tea tree variety. In addition, in order to ensure the quality of fresh leaves, during the planting process, the staff also needs to shade the tea trees, and the tea produced in this way is called the covered tea. Matcha is made by coating tea as raw material. Storage Stored in a clean,cool,dry area; keep away from strong, direct light. Function of Green Tea Powder and Matcha Powder: 1. Green tea is picked before the Qingming Festival, and the quality of such tea is the best. The summary of the matcha is postponed until May, in order to extend the growth period of the tea to reduce the bitter tea polyphenols in the tea. Therefore, the biggest difference between the finished matcha and green tea is that there is basically no bitterness, and green tea has a bitter taste. Green tea powder Green tea contains vitamin C and flavonoids, This flavonoid is also a precious nutrient, so it has a treasure-level effect. Green tea powder can be used as a mask to cleanse the skin.
Matcha has high quality requirements for raw materials, requiring the use of high-amino acid, protein and chlorophyll-containing tea leaves, while requiring low levels of tea polyphenols and caffeine in the raw materials. Before picking, there are requirements for picking time and leaf size of fresh tea leaves. Matcha production time is short, only about 50 days, with 4, 5 months of high-quality fresh tea as raw materials, the quality of matcha produced is the best. The tree species used in the processing of matcha tea are also exquisite. This tea tree is cultivated by clonal breeding techniques to ensure the purity of the tea tree variety. In addition, in order to ensure the quality of fresh leaves, during the planting process, the staff also needs to shade the tea trees, and the tea produced in this way is called the covered tea. Matcha is made by coating tea as raw material. Storage Stored in a clean,cool,dry area; keep away from strong, direct light. Function of Green Tea Powder and Matcha Powder: 1. Green tea is picked before the Qingming Festival, and the quality of such tea is the best. The summary of the matcha is postponed until May, in order to extend the growth period of the tea to reduce the bitter tea polyphenols in the tea. Therefore, the biggest difference between the finished matcha and green tea is that there is basically no bitterness, and green tea has a bitter taste. Green tea powder Green tea contains vitamin C and flavonoids, This flavonoid is also a precious nutrient, so it has a treasure-level effect. Green tea powder can be used as a mask to cleanse the skin.
Product details Product name: Matcha green tea powder Appearance: Green fine powder Material: Steamed green tea made from fine buds and leaves Process: Shading â?? green-removing by steaming â?? tea drying - tea milling â?? matcha Physical Characteristics: Loss on dying < 7.0% ; ash content < 7.5% Specification: 400mesh/500mesh/600mesh/1000mesh/1500mesh, this is 400mesh Matcha has high quality requirements for raw materials, requiring the use of high-amino acid, protein and chlorophyll-containing tea leaves, while requiring low levels of tea polyphenols and caffeine in the raw materials. Before picking, there are requirements for picking time and leaf size of fresh tea leaves. Matcha production time is short, only about 50 days, with 4, 5 months of high-quality fresh tea as raw materials, the quality of matcha produced is the best. The tree species used in the processing of matcha tea are also exquisite. This tea tree is cultivated by clonal breeding techniques to ensure the purity of the tea tree variety. In addition, in order to ensure the quality of fresh leaves, during the planting process, the staff also needs to shade the tea trees, and the tea produced in this way is called the covered tea. Matcha is made by coating tea as raw material. Storage Stored in a clean,cool,dry area; keep away from strong, direct light. Function of Green Tea Powder and Matcha Powder: 1. Green tea is picked before the Qingming Festival, and the quality of such tea is the best. The summary of the matcha is postponed until May, in order to extend the growth period of the tea to reduce the bitter tea polyphenols in the tea. Therefore, the biggest difference between the finished matcha and green tea is that there is basically no bitterness, and green tea has a bitter taste. Green tea powder Green tea contains vitamin C and flavonoids, This flavonoid is also a precious nutrient, so it has a treasure-level effect. Green tea powder can be used as a mask to cleanse the skin.
The packaging details that we follow are listed below: 30 Eggs laid in a tray 12 such trays in a ply carton 360 eggs in a carton 1312 carton in 40 ft reefer container 4,72,320 Eggs per 40 ft reefer container Features: Other Information: Packing Details: High quality 100% purity Longtime freshness Preparation of many dishes Rich taste High nutritious value Affordable price Pay Mode Terms: TT Minimum Order Quantity: 472320 Pieces Port of Dispatch: Durban Production Capacity: 200000 Eggs Per Day Delivery Time: 15 days 30 Eggs laid in a tray 12 such trays in a ply carton 360 eggs in a carton 1312 carton in 40 ft reefer container